01170I
ENGINEERING REQUIRBIEVTS FOR PLATS AND SUBDIVISIONS
Page Two
unless, releases of damages and/or drainage
easements are obtained from the other property
owners affected by said drainage. Any drainage
problems created by change of contour during plat
development must be corrected, prior to plat
approval or release of plat bond. Final approval
of plat (release of plat bond) will be withheld
until actual drainage as installed has been in-
spected by the City Engineer. Erosion controls
shall be provided.
The following statement shall appear on all plat
sheets:
Covenant: Owners, and all persons having any
present or subsequent ownership interest in
these lands, and the successors and assigns
of owners or other parties having any said
interest, hereby agree that the City of Edmonds
shall be held harmless in all respects from
any and all claims for damages for injunctive
relief which may be.occasioned now or in the
future to adjacent land or improvements by
reason of the construction, operation and
maintenance of the drainage system, and hereby
waive and release the City of Edmonds from.any
and all claims for damages, excluding damage
caused solely by an act or omission of said
City and injunctive relief which the owners,
i or their successors or assigns, may themselves
have now or in the future by reason of the
construction, maintenance and operation of
said drainage system.
10. Utility Easements and Access there to: 10.
As.required per Engineering plans
11. Underground Wiring: To be provided in accord- 11.
ance with Ordinance No. 1387. Street Lighting
shall be also provided with the necessary street
light standards and underground wiring connection.
12. Excavation and Grading: Excavation and 12:
grading shall conform to the requirements out-
lined in Chapter 70 of the Uniform Building Code,
1967 Edition, Vol. 1. Where extensive grading
and fill are involved in the development of a plat,
a grading plan and specifications shall be prepared.
RI;Q' D REQ' D BOND
PRIOR TO PRIOR TO POSTED COMPLETED
RECORDING BLDG PEMIT
Is