1104_001.pdfT
Corrections to Building Permit drawings for Project # BLD20W-0423
Written responses and summary of corrections made.
Buildin
General Plan Review Note:
A stamp from CG engineering has been added to Sheets S2.1 and S2.2 stating the drawings have
been reviewed for conformance with the structural requirements.
S2.1:1. There is an existing note on Drawing #3, Sheet A3.1 showing the insulation in the raised
up floor area of the existing garage is to be R = 38 spray in foam insulation (non air permeable).
This should negate the requirement for underfloor ventilation and a separate vapor barrier.