14-0329 American Brewery Boiler.pdf
City of Edmonds
PLAN REVIEW COMMENTS
BUILDING DIVISION
(425) 771-0220
DATE:4/23/2014
TO:GMS Metal Works Inc
th
1427 29
St NW
Auburn, WA 98001
RE:Plan Check: BLD20140329
Project:American Brewing Boiler System
Project Address:180 West Dayton St.
During review of the plans for the above noted project, it was found that the following information,
clarifications or changes are needed. Please provide written responses as to where the changes can
be found on the plans, and submit revised plans/documents to aPermit Coordinator.
1.Identify combustion air source to boiler room.
2.Identify equipment anchorage for all equipment over 400lbs operating weight.
3.There is a 1” backflow device called for. This will need to be an RPBA, with an indirect drain to
the plumbing waste.
4.Provide a section detail and listed fire rated assemblies for the one hour rated boiler room
(unless already existing and built as such).
5.Architect of record to provide stamp and signature on his drawing.
6.Provide MSDS for chemical(s) to be storedin chemical tank and identify if a dam is required in
case of spillage.
Pat Lawler, CBO
Senior Building Inspector
425 771 0220 x1703