20061027135548.pdfDATE: October 27, 2006
TO: Thad Fray
thadf@teufel.com
FROM: Jenny Readwin, Plans Exam er
RE: Plan Check # 2006-1174
Project: Fray Covered Porch
Project Address: 6916 176' St SW
During review of the above noted application, it was found that the following information,
corrections, or clarifications are needed. Please redline plans or submit two (2) sets of revised
plans/documents (affected sheets only) with a written response to each of the items below to a
Permit Coordinator.
1) Ridge board must one side larger than rafters to accommodate cut end of rafters. Either increase
to 2x14 ridge board or reduce rafters to 2x10.
2) Specify how loads from the 4x10 beams are carried to bearing at the house side of the beam.
3) Specify roofing material and sheathing type and thickness.
City of Edmonds
a �b
•r��f
ti E€s!`�e
N'.q
PLAN REVIEW COMMENTS
BUILDING DIVISION
est 1ago
(425) 771-0220
DATE: October 27, 2006
TO: Thad Fray
thadf@teufel.com
FROM: Jenny Readwin, Plans Exam er
RE: Plan Check # 2006-1174
Project: Fray Covered Porch
Project Address: 6916 176' St SW
During review of the above noted application, it was found that the following information,
corrections, or clarifications are needed. Please redline plans or submit two (2) sets of revised
plans/documents (affected sheets only) with a written response to each of the items below to a
Permit Coordinator.
1) Ridge board must one side larger than rafters to accommodate cut end of rafters. Either increase
to 2x14 ridge board or reduce rafters to 2x10.
2) Specify how loads from the 4x10 beams are carried to bearing at the house side of the beam.
3) Specify roofing material and sheathing type and thickness.