2012-0942 XS Woodworking.pdf
City of Edmonds
PLAN REVIEW COMMENTS
BUILDING DIVISION
(425) 771-0220
DATE: November 1, 2012
TO: Xavier Salazar
XS Woodworking
Email: XSWoodworking@comcast.net
FROM: Leif Bjorback, Assistant Building Official
RE: Plan Check: 2012-0942
Project: XS Woodworking
Project Address: 527 Dayton Street
During review of the plans for the above noted project, it was found that the following information,
clarifications or changes are needed. Please provide written responses as to where the changes can
be found on the plans, and submit revised plans/documents to a permit coordinator in the
Development Services Department. Thank you.
1.It appears that the proposed use of the space includes a wood shop, with accompanying
showroom. Since this use is different from that most recently approved by the city, it will be
considered a partial change of occupancy. Please provide a written description of the main
use of the space, to confirm this designation. (Eg. woodworking shop with public sales
area.)
2.Please label the 2 different drawings submitted as to what is depicted. (Eg. Existing Floor
Plan, Proposed Floor Plan, etc.)
3.Indicate clearly on the drawings the extent of the space occupied by XS Woodworking.
4.It is not clear on the drawings which walls are being added or removed. Please provide
additional notes or a more clear representation to distinguish new walls from existing walls.
5.Show clearly on the drawings all doors and openings with door sizes. The proposed
alterations require that all door hardware in the tenant space be lever handled or otherwise
code compliant. Please note this on the plans.
6.Any changes to the heating and ventilation systems will need to comply with the
International Mechanical Code. This may be done under a separate mechanical permit. It
will be a requirement of this permit to evaluate the ventilation of the space to determine
compliance with current code.