2014-0743 Burlington Coats RTU's.pdf
City of Edmonds
PLAN REVIEW COMMENTS
BUILDING DIVISION
(425) 771-0220
DATE: August 15, 2014
TO: Richard Sinnema
Email: heattransfer1@aol.com
FROM: Leif Bjorback, Building Official
RE: Plan Check: 2014-0743
Project: Burlinton Coat Factory
Project Address: 24111 Highway 99
During review of the plans for the above noted project, it was found that the following information,
clarifications or changes are needed. Please provide written responses as to where the changes can
be found on the plans, and submit revised plans/documents to a Permit Coordinator in the
Development Services Department..
1.Since the RTUs exceed 400 pounds, please provide seismic attachment calculations and
details for the RTUs stamped and signed by a Washington State licensed engineer. The
details must show attachments from the curb to roof as well as the unit to curb.