2015-0102 Tang alteration-remodel2 - Carpentry by Elliot.pdf
City of Edmonds
PLAN REVIEW COMMENTS
BUILDING DIVISION
(425) 771-0220
DATE: March 12, 2015
TO: Carpentry by Elliot
lge747@comcast.net
FROM: Chuck Miller, Plans Examiner
RE: Plan Check: BLD2015-0102
Project: Tang alteration-remodel
Project Address: 644 Bell Street
During a review of the plans by the Building Division for the above noted project, it was found that
the following information, clarifications, or changes are needed. A complete review cannot be
performed until the revised plans/documents, including a written response indicating where the
‘clouded’ or otherwise highlighted changes can be found on the revised plans, have been submitted
to a Permit Coordinator. Reviews by other divisions, such as Planning, Engineering, or Fire, may
result in additional comments.
On sheet 1:
1.Clarify the callout for the 18x18 footing used to support the loads below the south end of the
24+ foot long (4)1-3/4x18 LVL beam. It appears to be undersized for the loads indicated in
the provided structural calculations.