2015-0689 -0690 Edmonds Townhomes exterior envelope - BEE.pdf
City of Edmonds
PLAN REVIEW COMMENTS
BUILDING DIVISION
(425) 771-0220
DATE: June 26, 2015
TO: CDK Construction Services, Inc.
nfoster@cdkconstruction.com
FROM: Chuck Miller, Plans Examiner
RE: Plan Check: BLD2015-0689 -0690
Project: Edmonds Townhomes exterior envelope
Project Address: 624 & 628 Daley Street
During a review of the plans by the Building Division for the above noted project, it was found that
the following information, clarifications, or changes are needed. A complete review cannot be
performed until the revised plans/documents, including a written response indicating where the
clouded or otherwise highlighted changes can be found on the revised plans, have been submitted
to a Permit Coordinator. Reviews by other divisions, such as Planning, Engineering, or Fire, may
result in additional comments.
General Review Notes:
The proposed work appears to fall under the regulatory oversight of the Revised Code of
Washington (RCW) chapter 64.55.005. As such, the following requirements must be met:
1.The building enclosure design documents must be stamped by a licensed engineer or
architect.
2.The building enclosure design documents must contain a stamped statement by the person
stamping the building enclosure documents in substantially the following form: The
undersigned has provided building enclosure documents that in my professional judgement
are appropriate to satisfy the requirements of RCW 64.55.005 through 64.55.090..
In addition to the above requirements prior to permit issuance, the following will be required before
a final inspection by the City of Edmonds can be performed on, and a certificate of occupancy
can be issued by the Building Division for, the permit when issued:
The qualified inspector shall prepare and submit to the City of Edmonds Building Division
·
a signed letter certifying that the building enclosure has been inspected during the course of
rehabilitative construction and that it has been reconstructed in substantial compliance with
the building enclosure design documents.