2016-1684 - Magic Toyota Portal Frame #2 Beck.pdfBeck & Associates, PLLC
Structural Engineering & Code Consulting
February 18, 2018
Leif Bjorback
Building Official
City of Edmonds
121 51h Avenue North
Edmonds, WA 98020-3145
Subject: Magic Toyota — Portal Frame (Deferred Submittal) — 2nd Review
Permit: BLD16-1684
Per your request, Beck & Associates has completed a second structural review of the drawings and
calculations for conformance with the 2015 International Building Code (IBC), as adopted and
amended by the State of Washington and the City of Edmonds.
Our review of the plans and calculations indicates that corrections are necessary prior to permit
issuance. The applicant should address the following comments in itemized letter format in addition
to making corrections & revisions to the drawings. Corrections and revisions to the drawing should
be clouded so that they are clearly identifiable.
Legend:
Plain text = initial comment (these remain where an additional l comment is made)
Blue text additional l comment in response to the iresubmiittA
2) The shop drawings need to identify all members, specify all member sizes, and specify all
connection requirements (weld sizes, lengths, etc.). Currently, the shop drawings specify very
limited information. (It is not sufficient for this information to be provided in the calculations.)
Most connections (welld thickness & lengths, bollt sizes, etc.) are still not specified on the
submitted plans. lihe pllans do reference details that do not appear to Ilhave been included in the
submittal. Perhaps these details contain the required information? All connection detailing and
specifications need to be included in the submittal.
3) Each of the shop drawing sheets needs to be stamped/signed by the specialty engineer (Larson
Engineering, Inc.). In the most recent submittal, sheet 200111 was not stamped/signed. Please
verify all drawing sheets are stamped/signed prior to resubmitting.
When resubmitting, please be sure to Ilhave I....arson Engineering, Inc. stamp/sign all drawing
sheets that are under their supervision.
16425 SE 661h Street, Bellevue, WA 98006 • beckpllc@msn.com • PH: 206-313-3739
Permit BLD16-1684 (Portal Frame)
February 18, 2018
Page 2 of 2
5) As a reminder, resubmitted drawings need to be stamped/signed (shop drawing stamp) by the
engineer of record, PSM.
lillhe submitted pdf does not contain PSM"s sllhop drawing stamp & signature. It its possible that it
is not showing up in the pdf due to the digital) signature. However, wllhen resubmitting, the
stamp/signature need to be visible for my review. Additionally, the pllans cannot be locked
down, since we will)) ultimately need to applly our stamp to the drawings. When resubmitting,
pllease be sure that PSM"s sllhop drawing stamp/signature are visible before submitting to the City
of our review.
Numerous PSM markups were made on the initially submitted sllhop drawing set. However, they
were not included in the resubmitted drawings. AIIII PSM markups should be carried through in
the next submittal. Please be sure to include PSM"s markups in the resubmitted drawings.
Please contact me should you have any questions.
Respectfully,
Douglas Beck, PE, SE
Beck & Associates, PLLC
16425 SE 66th Street, Bellevue, WA 98006 . beckpllc@msn.com . PH: 206-313-3739