6590_VICTORIAN_GASLIGHT_I[1].pdf6590 VICTORIAN GASLIGHT I SERIES SPECIFICATIONS
GENERAL
The 6590 Gaslight I is a large scale Victorian authentically
detailed fixture which consists of a decorative cast aluminum
fitter, cast ballast housing assembly and polycarbonate or
acrylic clear lens. It features decorative ropes supporting
gracefully detailed aluminum hinged roof. It shall be appoint-
ed with a cast aluminum pedestal ball finial on top of a tall
spun aluminum cupola.
FITTER
The fitter shall be heavy wall cast aluminum, 356 alloy for
high tensile strength. It shall have an inside diameter open-
ing to accept a 3" diameter pole or tenon. When ordered with
a Sternberg aluminum pole, the fitter shall be set screwed to
the pole top or tenon.
BALLAST HOUSING
The ballast housing shall be heavy wall cast aluminum, 356
alloy for high tensile strength. The housing shall be mounted to the cast fitter with two screws.
The ballast shall be attached to the ballast housing by two aluminum wide faced "Z" brackets to
en-sure high capacity heat sinking of ballast temperatures, keeping the ballast cooler and ensuring
long life.
ELECTRICAL
Fixture shall be U.L. or E.T.L. listed in U.S. and Canada. H.I.D. ballasts shall be high power fac-
tor with lamp starting down to -30 degrees C. Medium base and mogul base porcelain sockets
are 4KV rated. The ballast/socket assembly shall be pre-wired when ballast is located in the fix-
ture. All compact fluorescent (PL) ballasts shall be instant start electronic with a starting temper-
ature of down to 0 degrees F. They shall have a 4-pin socket to accept quad or triple tube lamps.
Ballasts shall be DOE EISA compliant.
FIXTURE HOUSING
The 6590 fixture shall be 18" in diameter x 46" tall with a 7" diameter neck on the lens. The
clear lens shall be made of vandal resistant clear textured polycarbonate or dent resistant (DR)
clear acrylic. The lower section of the lens shall be frosted. The cast aluminum lens holder and
scalloped roof ring shall be made of cast aluminum, 356 alloy for high tensile strength. The roof
shall be spun aluminum, painted white (Model 6590), white translucent acrylic (Model 6590GT),
polished brass (Model 6590BD) or antique copper (Model 6590CD).
OPTICAL OPTIONS
Refractors shall be 6" diameter borosilicate glass with an I.E.S. Type 3 (RE3G) or Type 5 RE5G)
distribution. It shall be secured to the socket stem with 3/8" plated steel threaded pipe nipple and
rest on a cast aluminum holder with anti-shock gasket. The refractor will be secured to cast hold-
er with a quarter-turn internal aluminum twist ring for ease of maintenance.
The NIGHTSKY®OPTI-SHIELD® Louver Optic System (LO-S) shall be a multi-tier reflector
with 7" diameter rings to produce an I.E.S. Cut-off Type 3 or 5 distribution. The Louver Optic
System shall be made of highly specular anodized aluminum and shall come standard with medi-
um base socket.
NIGHTSKY®STAR-SHIELD®Roof Optics distribution shall be delivered by multi-segmented
roof mounted reflector systems which eliminate uplight and provide cut-off. The reflector cavity
LIST NO. 6590
VICTORIANGASLIGHT I
SERIES
Lanterns
NIGHTSKY®
Roof Optics
or Louver
Optics
Available
Hinged Lighted
Dome or Solid
Roof
Clear
Polycarbonate
or Acrylic Lens
Type 3 or 5
Refractor
Available
Photocell
(Optional
not Shown)
6-266
11-09
(Continued on back page)
6590 VICTORIAN GASLIGHT I FIXTURES /ARMS PM-WB
FIXTURES
OPTICAL SYSTEMS PIER BASE MOUNTS (PB)
ARMS - POST MOUNT (PM) or WALL BRACKETS (WB) See Arms Section for more information
6590AAcrylic Lens
6590GT Polycarbonate
6590AGT Acrylic
Glow Top
46”46”46”
TASCR
478 TA
16 1/2”
161/2”
15 1/4”
161/8”
213/8”
111/4”
478TS
161/8”
17”
18” W 18” W 18” W 18” W
579
19 1/4”
16 1/2”
6590PolycarbonateLens
RE3GRE5G
Refractor
HSS
House Side
Shield
120o
FHC Frosted
HurricaneChimney
Alzak Disc
6590BD Brass Dome
6590CD Copper Dome
46”
ROH
Roof OpticsType 2, 3 or 5
480
(480D Downswept Arm)
6236
183/4”
15 ”
173/4”
161/2”
BAPTTwin Only
24”
779271/2”
311/2”
34”
62C
181/2”
223/8”
450PB
3 3/4”
10 1/2”
LO3-S
LO5-S
Louver
Optics
6-267
CO5Cone
Optics
11-09
BUILDING A PART NUMBER
ARM MOUNTED FIXTURE POST TOP FIXTURE POST POST CAP LIGHT SOURCE OPTICS OPTIONS
(PT) BALLAST
NO.
OF ARMS FITTER/POSTARM (See Post Section) WATTS/TYPE/VOLTS
WALL FIXTURES LIGHT SOURCE OPTICS OPTIONS FINISH
BALLAST
FIXTURE/ WALLBRACKET WATTS /TYPE/VOLTS
Lanterns Specifications
3912FP46590 100HPS120 RE3G HPS100/MED
HPS100/MED BKRO3/FHC6590/478WB 100HPS120
POSTARMS
• 478PM
• 478TSPM
• 480PM
• 480DPM
• 62CPM
• 6236PM
• 579PT
• TAPT
• TASCR
• BAPT
• 779PT
PIER BASE
•450PB
BALLASTS2
• 35HPS1
•50HPS
•70HPS
• 100HPS
•150HPS
• 250HPS
• 50MHP
• 70MHP
•100MHP
•150MHP
•175MHP7
• 200MHP
• 250MHP
•26PLT
•32PLT
•42PLT
•57PLT
•70PLT
•60PLH
•85PLH
•120PLH
•INCAND
•QL55*
•QL85*
LAMPS 6
• HPS35/MED
• HPS50/MED
• HPS70/MED
• HPS100/MED
• HPS150/MED
• HPS250/MOG/ED18
•MHP50/MED
•MHP70/MED
•MHP100/MED
• MHP150/MED
• MHP175/MOG/ED287
• MHP200/MOG/ED28
• MHP250/MOG/ED28
•PLT26
•PLT32
•PLT42
•PLT57
•PLT70
•PLH60
•PLH85
•PLH120
OPTIONS
• PEC1 Photocell-Bimetal 120 Volt
• PEC2 Photocell-Bimetal 208-277 Volt
•PEC1-E Photocell-Electronic 120 Volt
•PEC2-E Photocell-Electronic 208-277 Volt
•FHS Single Fuse and Holder-120,277 Volt
•QR Quartz Re-Strike
•FHD Dual Fuse and Holder-208,240,480 Volt
•PF Pineapple Finial or Font (TA,TASCR)
•BF Ball Finial or Font (TA,TASCR)
•LAMPS Select from List
PART NUMBER SELECTIONS
PIER FIXTURES
Uses same informationboxes as wall fixture
6590/450PB
FIXTURE/PIER BASE
CENTER
FINISH
POST& ARM FIXTURES
BKPT
WALLBRACKETARMS
• 478WB
• 478TSWB
•480WB
•480DWB
• 62CWB
• 6236WB
•579WB
• TAWB
•TASCRWB
VOLTAGES
• 120
• 208
• 240
• 277
• 480
• MULTI(120-277)
*Consult factory for
specification details
LIGHTING 555 Lawrence Ave. Roselle, IL 60172 • 847-588-3400 • Fax 847-588-3440
www. sternberglighting.com Email: info@sternberglighting.com
FIXTURES
• 6590
• 6590A
• 6590GT5
• 6590AGT5
• 6590BD
• 6590ABD
• 6590CD
• 6590ACD
OPTICS
•RE3G
•RE5G
• ALZAK
• HSS
•LO3-S
•LO5-S
•RO2H-S4, 6
•RO3H-S4, 6
•RO5H-S4, 6
•CO5
•FHC 3
6-268
FINISHES STANDARD
• BKT Black Textured
• BK Black
• VG Verde Green
• PGT Park Green Textured
• PG Park Green
• ABZT Architectural Medium
Bronze Textured
• ABZ Architectural Medium
Bronze
• SI Swedish Iron
• DBT Dark Bronze Textured
• DB Dark Bronze
• OWGT Old World Gray
Textured
• OWG Old World Gray
FINISHES CUSTOM
• WHT White Textured
• WH White
• CV Copper Vein
• WBK Weathered Black
• WBR Weathered Brown
• CD Cedar
• RT Rust
• OI Old Iron
• TT Two Tone
• CM Custom Match
NOTES:
135HPS is 120 volt only.
2Medium base sockets standard
with ballasts up to 150 watts HID.
Mogul base sockets are standard
with ballasts 200 watts and over. 4-pin for PL.
3 MED base only when used to
house lamp.
4 Medium base lamp only. Consult
factory for mogul base.
5 Can support PLH or PLT up to 60w.
RE3G, RE5G or FHC optics
only,150 watts max.
6 Metal halide systems are pulse start.
7 Consult factory for limitations.
11-09
6590 VICTORIAN GASLIGHT I SERIES SPECIFICATIONS
shall be made of specular anodized aluminum. Roof Optics Type 2 (RO2H-S), Type 3 (RO3H-S),
Type 5 (RO5H-S) horizontal are available for medium base lamps.
Frosted Glass Hurricane Chimney (FHC) is an optic option which adds an authentic touch and
can be used with Roof Optics.
Cone Optics Type 5 (CO5) distribution uses a vertically mounted lamp inside a highly specular
reflector system to provide a reduction of uplight with a wide lighting span.
House Side Shield (HSS) is an option which will block up to 120° of light in any one direction.
QUARTZ RE-STRIKE
All 6590 fixtures can be supplied with an optional quartz re-strike system to retain constant fix-
ture light if the H.I.D. lamp fails. The fixture will be equipped with a 100 watt quartz lamp and
a controller to run on a 120 volt circuit and must be used in conjunction with a 120 volt or multi-
tap ballast.
PHOTOCELLS
Photocells shall be either the thermo bi-metal button type or the electronic button type. On single
post top fixtures the photocell shall be mounted in the fitter and pre-wired to ballast. On multiple
head fixture assemblies photocells shall be mounted in the pole shaft on an access plate and are
not pre-wired as ballast housing assemblies and fitters are packaged separately for ease of wiring
to source. The thermo bi-metal photocell shall be designed to turn on at 1.0 footcandle and turn
off at not more than 5 footcandles. The electronic button type photocell is instant on and a 5-10
second turn off and shall turn on at 1.5 footcandles with a turn-off at 2-3 footcandles. Photocells
are either 120 volt or 208 thru 277 volt.
ARMS
All arms are made of cast aluminum and/or extruded aluminum. Arms with decorative filigree
have meticulously detailed scroll work and gracefully curved brackets. All 6590 fixtures will
have its fitter either welded to the arm or will be mechanically attached at the factory to ensure
arms will be plumb, secure and level over the life of the installation. Each arm shall be bolted
to a post mount adapter, which is welded to the pole to ensure proper alignment to the base.
Twin TA, TASCR and 579 arms will be attached to a decorative center hub which will slip-fit the
center tenon of the pole (not shown). BA and 779 arms are available as a twin application. Arms
are pre-wired for ease of installation.
FINISH
Prior to coating, each assembly shall be chemically cleaned and etched in a 5-stage washing sys-
tem which includes alkaline cleaning, rinsing, phosphoric etching, reverse osmosis water rinsing
and non-chrome sealing to ensure corrosion resistance and excellent adhesion for the finish coat-
ing. The finish coating shall be electrostatically applied semi-gloss, super durable polyester pow-
der baked at 400 degrees for a durable and superior, color retentive finish. Our optional antique
Verde Green finish and Swedish Iron finish are hand brushed using a 3-step process. The total
assembly shall be wrapped in shockproof wrapping or fully enclosed in corrugated cartons.
WARRANTY
Five-year limited warranty. See product and finish warranty guide for details.
LIST NO. 6590
VICTORIAN
GASLIGHT I
SERIES
Lanterns
LIGHTING
555 Lawrence Ave. Roselle, IL 60172 • 847-588-3400 • Fax 847-588-3440
www. sternberglighting.com Email: info@sternberglighting.com
6-269
11-09