bld201311414_Wright_ENG1.pdf
City of EdmondsBLD20131414
TH
121 5AVENUE NORTHEDMONDS, WA 98020 • (425) 771-0220 FAX(425) 771-0221
Website: www.ci.edmonds.wa.us
PUBLIC WORK DEPARTMENT
Planning • Building • Engineering
Engineering Plan Review Comments
PermitApplication:Date:
#BLD20131414January13, 2014
Project Name/Address:
Wright –Pool 8712 Talbot Rd.
Contact Person/Address, Fax or E-mail:
Aqualine Pool & Spa 224 SW. 192 St. Jeff@aqualinepoolandspa.com
Reviewer: Chris RiveraDivision:
ENGINEERING
During review of the subject submittal, it was found that the following information, corrections, or
clarifications would need to be addressed. All Handouts referred to in these comments can be accessed at
our website: www.ci.edmonds.wa.usunder City Government / Development Services Department /
Engineering Division then scroll down to Handouts:
1)Please add a note that the silt fence will be installed as needed per Edmonds Standard Detail E1.1.
2)Please add a note that all disturbed soils will be compost amended.
3)Pools are considered impervious surfaces.Impervious surface is any hard surface area that either
prevents or retards the entry of water into the ground as it would occur in nature.Please revise
calculations to include entire pool sq.ft., not just the coping.
4)Please show all impervioussurfaces and year installed on the plans (walkways, roof,driveway, gravel
areas, pool, etc.).Calculateimpervious surface asconstructed before 1977(not regulated), impervious
surfaces constructed after 1977(regulated)as well as proposed impervious surfaces (regulated).Is there
a proposed walkway to the pool?
5)As mentioned abovefor impervious surface calculations.Please separate previous drivewayfootprint
impervious surface(not regulated)from new driveway impervious surfaceconstructed in 2013
(regulated).Original driveway ifconstructed before 1977, does not count towards regulated impervious
surfaces.
6)If you have 2000sqft or more of impervious surfaces constructed after 1977you will be required to
install a stormwater management system. Please see handout E72 (attached) for more information and
revise the plans accordingly.
7)Please show the line and size of the side sewer from the home to the clean outas well as size of clean
out. Also show clean out distance in relation to the pool on the site plan.
8)Please show location ofutilities (side sewer, water service line & storm water) on private property.
Please resubmit 3 copies of the revised plansand associated documents with a written response to each
item to a Permit Coordinator. Please contact me at 425-771-0220ext.1339or by e-mail at
chris.rivera@edmondswa.govyou have specific questions regarding these plan corrections.
DATE E-MAILED1/13/2014PAGE(1)