Loading...
BLD20141073 Plan Review Comments - 2nd Review.pdf CE ITY OF DMONDS th •1215AN•E,WA98020 VENUE ORTH DMONDS P: 425.771.0220 • F: 425.771.0221 • W:www.edmondswa.gov HONEAXEB DSD:P•E•B EVELOPMENT ERVICES EPARTMENTLANNING NGINEERING UILDING June 11, 2015 Mr. Kritsadang Kongsomboot Email: kongsomboot@hotmail.com ND RE: 2PLAN REVIEW COMMENTSFOR PLANCHECK #BLD20141073 TH KONGSOMBOOTCARPORTLOCATED AT 2342276AVE. W. Dear Mr. Kongsomboot: I have reviewed your resubmittal dated May 12, 2015 for the above building permit applicationfor the Planning Division,and it was found that the following information, corrections, or clarifications will need to be addressed before review can continue: Setbacks: The minimum required side setback is 7.5-feet from the southern property line. Your plans state 1. that the carport is 17feetby 24feet;however, it is unclear is these dimensions include out to the support posts or if the dimensions also include the eaves.The code allows up to 2.5 feet of eaves to project into the minimum required setback. So, the eaves of the carport must be a minimum of 5 feet from the southern property line, but the support posts must be a minimum of 7.5 feet from the southern property line. Please revise the plans as necessary so that the carport complies with the setback requirements. Site Plan: In order to confirm compliance with the above setback requirements, please clearly indicate the 2. locations of all of the support posts for the carport on the siteplanand also indicate the location of the carport’s eaves. Please submit three copies of your revised site plan (including one reduced copy) and two copies of any revised building plan sheets to a Development Services Permit Coordinator. Our office hours areMondays, Tuesdays, Thursdays, and Fridays between 8:00am and 4:30pm. Our office is closed on Wednesdays. or (425) 771-0220. If you have any questions, feel freeto contact me at Jen.Machuga@edmondswa.gov Sincerely, Development Services Department -Planning Division JenMachuga Associate Planner Page 1of 1