BLD20150010_Review_Comments_ENG1.pdf
CITYOFEDMONDS
PLAN REVIEW COMMENTS
ENGINEERING DIVISION
(425) 771-0220
City Website: www.edmondswa.gov
rd
DATE:January 23
, 2015
TO:Paul & Pam Meyer
Pammeyer3@comcast.net
FROM:Jennifer Lambert
Engineering Technician
RE:Plan Check #:BLD20150010
th
Project& Address :Meyer –17127–68Ave W
During review of the above noted application, it was found that the following information,
corrections, or clarifications are needed. Please redline plans or submit three (3) sets of revised
plans/documents with a written response to each of the items below to a Permit Coordinator.
City of Edmonds handouts and standard details can be referenced on the City website under Permit
Assistance.
1)Please show all impervious surface areas on the plans (i.e. patios, sheds, walkways, concrete,
asphalt, gravel areas, etc.).
2)Please label the year of construction for all impervious surface areas.
3)Please provide the impervious surface calculations as shown on the plans in the table format
provided below.
IMPERVIOUS SURFACE CHART
LineTypeArea (square feet)
1.Non-Regulated
ExemptRegulated
2.Replaced
3.New (Post 1977)+
Total Regulated Impervious Area
=
4.
Mitigation required if in excess of 2000sf
5.Total Area Mitigated by Existing Stormwater Management System(s)-
=
6.Regulated Area Not Yet Mitigated
=
7.Area Proposed to be Mitigated by Low Impact Development Techniques
=
8.Area Proposed to be Mitigated through Conventional SWM Techniques
Please contact me at 425-771-0220 or by e-mail at jennifer.lambert@edmondswa.govif you have
specific questions regarding these plan corrections.