Loading...
BLD2015-0530 Fortaleza TI submittal in response to plan review.msg Cockrum, Mark From:Miller, Chuck Sent:Thursday, January 28, 2016 12:11 PM To:'harryhosey@gmail.com' Cc:Thornquist, Linda Subject:BLD2015-0530 Fortaleza TI submittal in response to plan review Good morning, This email is intended to serve as a written record of our telephone conversation earlier this morning regarding proposals submitted in response to plan review comments for the project referenced in the subject line. The submittal dated January 8, 2016 appears to provide an adequate solution to the concerns regarding overturning during a seismic event. The connection of the individual ‘lockers’ to each other, along with a nominal base attachment and the dead weight of the combined assembly, also eliminates the need to evaluate the ability of the ‘existing’ structure (or portions of it) to withstand additional loads due to a direct connection. The submittal dated January 19, 2016 proposes an attachment to the floor above that would require additional information as noted in the above paragraph, and does not appear to provide any greater resistance to overturning than that achieved by the earlier proposal. Considering the above, and based upon our earlier discussion, it was mutually agreed that the proposal dated January 19, 2016 would not supersede that dated January 8, 2016 and would be removed from review. The submittal dated January 8, 2016 will be ‘merged’ with the construction documents submitted earlier to complete an ‘approved’ proposal. Linda will be contacting you when the permit has been processed and is ready to be picked up. Feel free to contact me if you have any questions or if there is any disagreement with that noted above. Chuck Miller, Plans Examiner chuck.miller@edmondswa.gov 425-771-0220 x 1314 Development Services Department Building Division th 121 5 Avenue N Edmonds, WA 98020 www.edmondswa.gov Development Services Permit Center Hours Monday & Tuesday - 8:00AM – 4:30PM CLOSED Wednesday Thursday & Friday - 8:00AM – 4:30PM 1