BLD20151372-Coldwell_Banker_ENG1.pdf
CITY OF EDMONDS
PLAN REVIEW COMMENTS
ENGINEERING DIVISION
(425) 771-0220
City Website: www.edmondswa.gov
DATE:November 3, 2015
TO:Security Signs, Inc.
cyndi@securitysigns.com
FROM:Jennifer Lambert
Engineering Technician
RE:Application #: BLD20151372
Project: Coldwell Banker–Wall sign and blade sign
th
Project Address: 108 5Ave S
During review of the above noted application, it was found that the following information, corrections, or
clarifications are needed. Reviews by other divisions, such as Planning and Building, may result in
additional comments. Please redline plans or submit three (3) sets of revised plans/documents with a
written response to each of the items below to a permit coordinator.
nd
Resubmittals can be made at the Development Services Department on the 2floor of City Hall. Permit
Center hours are M, T, Th & F from 8am-4:30pm. The Permit Center is closed on Wednesdays.
City of Edmonds handouts, standard details and development code can be referenced on the City website.
Please Note:Building Handouts do not include updated Engineering Division Requirements. Refer to
Engineering Handouts for all Engineering Requirements.
1.A Street Use Permit is required to install a sign over the City sidewalk. While blade signs are exempt
from this requirement, a street use permit will still be required for the proposed wall sign. Please refer
to City of Edmonds Handout E75 –Street Use Permit Requirementsfor additional information.
Please read the handout thoroughly and submit all required information, including a certificate of
insurance including specific language and confirming required coverage amounts.
11
Page of