Loading...
BLD20151403.PDFCITY OF EDMONDS ISal) STATUS: ISSUED 11/09/2015 Expiration Date: 41-1017 Parcel No: 27031300103600 I w M61 w d:a 11IT[111kV01 DI1: CHRISTIAN A & SANDRA K OLSON 9221 OLYMPIC VIEW DR EDMONDS, WA 98020 121 5TH A VENUE NORTH - EDMONDS, WA 98020 PHONE: (425) 771-0220 - FAX: (425) 771-0221 Pe9rrn 'u# ,.j$-i 31 0<151403. Project Address 92'2:1.0LX1 - I*PIC"NI,71 V D'R,i EDMONDS NEWWAY ENERGY & HOMETECHNIC NEWWAY ENERGY & HOMETECHNIC C/O ADRIAN BADELITA C/O ADRIAN BADELITA 13405 KENWANDA DRIVE' 13405 KENWANDA DRIVE SNOHOMISH, WA 98296 SNOHOMISH, WA 98296 (425)770-4620 (425)770-4620 LICENSE #: newwaeh899bo EXP:O1/20/2017 NFPA 13D FLOW THROUGH FIRE SPRINKLER SYSTEM FORNEW SFR VALUATION: $0.00 PERMIT TYPE: Residential PERMIT GROUP: 30 - Fire Sprinkler GRADING: N CYDS: 0 TYPE OF CONSTRUCTION: V-B RETAINING WALL ROCKERY: OCCUPANT GROUP: R-3/U OCCUPANT LOAD: FENCE: ( 0 X 0 FT.) CODE: 2012 OTHER: ------- OTHER DESC: ZONE: NUMBER OF STORIES: 2 IVESTED DATE: NUMBER OF DWELLING UNITS: 1 LOT #: AREA EXISTING AREk BASEMENT: 0 1 ST FLOOR: 1671 2ND FLOOR: 2528 PROPOSED BASEMENT: 0 1 ST FLOOR: 0 2ND FLOOR: 0 3RD FLOOR: 0 GARAGE: 678 DECK: 1474 OTHER: 596 13RD FLOOR: 0 GARAGE: 0 DECK: 0 OTHER: 0 BEDROOMS:3 BATHROOMS:S 1 BEDROOMS:0 BATHROOMS:0 FRONTSLTBACK SIDESETBACK REARSEI'BACK REQUIRED: PROPOSED: REQUIRED: PROPOSED: REQUIRED: PROPOSED: HEIGHT ALLOWED:O PROPOSED:O REQUIRED: PROPOSED: SETBACK NOTES: 1 AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY, NO PERSON WILL BE EMPLOYED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMEN'S COMPENSATION INSURANCE AND RCW 18:27. T ION T A PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HIS/HER DEPUTY AND ALL FEES ARE PAID. Linda 7hol- wSk Novew bIv- 9, Zal5 Sianatur Print Name Date Released By Date ATTENTION IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL OR A CERTIFICATE OF OCCUPANCY HAS BEEN GRANTED. UBC109/ IBCI 10/ IRCI 10. ONLINE APPLICANT = ASSESSOR OTHER Nt--w STATUS: ISSUED BLD20151403 • Final approval on a project or final occupancy approval must be granted by the Building Official prior to use or occupancy of the building or structure. Check the job card for all required City inspections including final project approval and final occupancy inspections. • Any request for alternate design, modification, variance or other administrative deviation (hereinafter "variance") from adopted codes, ordinances or policies must be specifically requested in writing and be called out and identified. Processing fees for such request shall be established by Council and shall be paid upon submittal and are non-refundable. • Approval of any plat or plan containing provisions which do not comply with city code and for which a variance has not been specifically identified, requested and considered by the appropriate city official in accordance with the appropriate provision ofcity code or state law does not approve any items not to code specification. • Sound/Noise originating fromtemporary construction sites as a result of construction activity are exempt fromthe noise limits of ECC Chapter 5.30 only during the hours of 7:00am to 6:00pm on weekdays and 10:00am and 6:00pm on Saturdays, excluding Sundays and Federal Holidays. At all other times the noise originating from construction sites/activities must comply with the noise limits of Chapter 5.30, unless a variance has been granted pursuant to ECC 5.30.120. • Applicant, on behalf of his or her spouse, heirs, assigns, and successors in interests, agrees to indemnify defend and hold harmless the City of Edmonds, Washington, its officials, employees, and agents from any and all claims for damages of whatever nature, arising directly or indirectly from the issuance for this permit. Issuance of this permit shall not be deemed to modify, waive or reduce any requirements of any City ordinance nor limit in any way the City's ability to enforce any ordinance provision. • Request final Fire Department Inspection (425) 775-0215. THIS PERMIT AUTHORIZES ONLY THE WORK NOTED. THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY CONSTRUCTION ON THE PUBLIC DOMAIN (CURBS, SIDEWALKS, DRIVEWAYS, MARQUEES, ETC.) WILL REQUIRE SEPARATE PERMISSION. PERMIT TIME LIMIT. SEE ECDC 19.00.005(A)(6) BUILDING (425) 771-0220 EXT. 1333 1 ENGINEERING (425) 771-0220 EXT. 1326 1 FIRE (425) 775-7720 PUBLIC WORKS (425)771-0235 PRE-TREATMENT (425) 672-5755 RECYCLING (425) 275-4801 0 When calling for an inspection please leave the following information: Permit Number, Job Site Address, Type of Inspection being requested Contact Name and Phone Number, Date Prefereed, and whether you prefer morning or afternoon. F-Fire Sprinkler Insulation • F-Fire Sprinkler Bucket Test • F-Fire Sprinkler Acceptance FA X n DEVELOPMENT SERVICES RESIDENTIAL BUII.DING PERMIT APPLICATION Fst 1890 121 5h Avenue N, Edmonds, WA 98020 City of Edmonds Phone 425.771.0220 4 Fax 425.771.0221 PLEASE REFER TO THE RESIDENTIAL BUILDING CHECKLIST FOR SUBMITTAL REQUIREMENTS PROJECT ADDRESS (Street, Suite #, City State, Zip): /1A-- t �. Parcel #: Subdivision/Lot #: Project Valuation: APPLICANT: /V'tAt W Q �h P one: Z42-9- 4�aLa Fax: Address (Street, Cit , late, Zi A'34oS W1Qh0t(v-aQ. b v, , E-Mail Address: b 9 c.i�� �c c • n.e�" PROPER OWNER: S S� S Phone: Address (Street, City, State, Zip): E-Mail Address: ND AGENCY: Phone: A s (Street, City, State, Zip): E-Mail Address: CONTRACTOR:* ill"uJa Phone: res_;�40 4b)_13 flax: Address (Street City State, Zip): '�Lio K21/� lu�l-c�Q. E-Mail Address: 6_01d9_Vi CCU . M *Contractor must have a valid City of Edmonds business license prior to doing work in the City. Contact the City Clerk's Office at 425.775.2525 WA State License #/Exp. Date: tjy j vj 4r 1+ $ Q ✓3 Q A. 2A•a City Business License #/Exp. Date: DETAIL THE SCOPE OF WORK: Sly \ PROPOSED NEW SQUARE FOOTAGE FOR THIS PROJECT: Basement: s . ft. Select Basement Type: Finished U Unfinished ls` Floor: s . ft. Gara e/C ort: -sq. ft. 2" Floor: s . ft. Deck/Cvrd Porch/Patio: s . ft. Bedrooms # Full-3/4 Bath # Half -Bath # Other: --sq. ft. Fire Sprinklers: Yes No Retaining Wall: Yes No Grading: Cut cu. yds. Fill cu.yds. Cut/Fill in Critical Area: Yes LJ No I declare under penalty of perjury laws that the information I have provided on this form/application is true, correct and complete, and that I am the property owner or duly authorized agent of the property owner to submit a permit application to the City of Edmonds. rLJoe��-�J SA t-- 4� Print Name: A Owner Agent/Other ❑ (specify): Signature: �!7 •_ ���� �G' , Date: x X 0 FORM A LABuilding New Folder 2010\DONE & x-ferred to L-Building-New drive\Form A2014.docx Updated: 1/17/2014 OF ED-4 O DEVELOPMENT SERVICES _:Ax , RESIDENTIAL BUILDING PERMIT T. Aw APPLICATION FORM A Fst l g90 121 5'l Avenue N, Edmonds, WA 98020 City of Edmonds Phone 425.771.0220 Q Fax 425.771.0221 Equipment Type MECHANICAL Appliance/Equipment Information (new and relocated) Total # Furnace Gas #_Elec #_Other: #_ BTUs: <100k_ >100k_ Location(s) Air Handler / Gas #_Elec #_Other: #_CFM: <10k_ >10k_ Location(s) (circle selected)) AC / Compressor / Boiler / Heat Pump / Gas #_Elec #_Other: # BTUs: <100k, 100k-500k, 500k-IMil Roof Top Unit HP; <3, 3-15, 15-30 Location,(s) (circle selected) Hydronic Heating Gas #_Elec #_In -Floor _Wall Radiant_ Boiler BTUs: Location Exhaust Fans (single Bath #_Kitchen #_Laundry # #_ duct) _Other: Fireplace Gas #_Elec #_Other: #_ Location(s) Dryer Duct FUEL GAS Appliance Type Appliance/Equipment Information (new and relocated) Total # AC Unit BTUs: Location(s): Furnace BTUs: Location(s): Water Heater BTUs: Location(s): Boiler BTUs: Location(s): Other: BTUs: Location(s): Fireplace/Insert BTUs: Location(s): Stove/Range/Oven Dryer Outdoor BBQ TOTAL OUTLETS PLUMBING FIXTURE COUNT Fixture Type (new and relocated) Total # Fixture Type (new and relocated) Total # Water Closet (Toilet) Pressure Reduction Valve/Pressure Regulator Sink (kitchen, laundry, lavatory, bar, eye wash, etc.) Water Service Line Tub/Shower Drinking Fountain Dishwasher Clothes Washer Hose Bib Backtlow Prevention Device (e.g. RBPA, ocvA, AVB) Water Heater Tankless? Yes ❑ No ❑ Hydronic Heat in: Floor ❑ Wall ❑ Floor Drain/Floor Sink Other: Refrigerator water supply (for water/ice dispenser) Other: FORM A LABuilding New Folder 2010\DONE & x-ferred to L-Building-New drive\Form A2014.docx . Updated: 1/17/2014 Copy 'Y J'a 0 I ble i Specifically Listed for use in Multipurpose Systems that serve both domestic water and fire protection. Sprinkler Type 9 Residential Flat Concealed Sprinkler listed 1sa- a minimum design density of .05 gpm/ft2 wig "potable water". • Model RFC30 LL • Model RFC43 LL • Model RFC49 LL Features 2 3 4 5 6 National Sanitation Foundation (NSF) Cer- tified to NSF/ANSI Standard 61 Annex G (Less than 0.25% Lead content). Very low water flow requirements. Cover plate attachment (Plain or Perforated) with 112" (13mm) total adjustment Thread-on/off or Push-on/off cover attach- ment option. Smooth Aesthetic ceiling profile. Available in white, brass, chrome and black plated or custom painted finishes. Patent Pending Listing & Approvals 1. Listed by Underwriters Laboratories, and certified by UL for Canada (cULus) 2. NSF Cerified to NSF/ANSI Standard 61 Annex G Product Description Model RFC30 LL, RFC43 LL and RFC49 LL Concealed Residential Sprinklers are fast response residential fusible solder link automatic sprinklers. Residential sprinklers dif- fer from standard sprinklers primarily in their response time and water distribution patterns. Model RFC30 LL, RFC43 LL and RFC49 LL sprinklers discharge water in a hemi- spherical pattern below the sprinkler deflector. Residen- tial distribution patterns are higher and generally contain Bulletin 032 Rev. C Model RFC30 LL (SIN RA3211) Model RFC43 LL (SIN RA3212) Model RFC49 LL (SIN RA3216) Residential Flat Concealed Sprinklers 0 2015 SERVICES :DMONDS Plain Cover Plate Perforated Cover Plate a finer droplet size than standard sprinkler patterns. The combination of speed of operation and high discharge pat- tern required for residential sprinklers has demonstrated, in fire testing, an ability for controlling residential fires, and thereby providing significant evacuation time for occu- pants. The RFC30 LL, RFC43 LL and RFC49 LL Sprinklers provide the best form of fire protection by combining an at- tractive appearance and Yz" (13mm) of cover adjustment for ease of installation. The small diameter cover plate is easily and positively attached and blends into the ceiling, concealing the most dependable fire protection available, an automatic sprinkler system. The RFC30 LL, RFC43 LL and RFC49 LL are UL Listed and NSF Certified Residen- tial Sprinklers to be installed in the residential "potable" water applications of any occupancy in accordance with NFPA 13, 13R, & 13D and meets all applicable low lead standards, .25% or less. The cover plate adjustability of the RFC30 LL, RFC43 LL and RFC49 LL can reduce the need for precise cutting of drop nipples. The threaded cover plate assembly can be adjusted without tools to fit accurately against the ceiling. The fire protection system need not be shut down to adjust or remove the cover plate assembly. Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523 W 0 W N s Application and Installation For use in fire sprinkler systems that also supply potable water to a plumbing fixture or fixtures. The RFC30 LL, RFC43 LL and RFC49 LL, for residential installa- tions, use a 165°F (74°C) fusible solder link in a tuning fork style sprin- kler frame with a drop -down deflector. This assembly is recessed into the ceiling and concealed by a flat cover plate. The cover plate is attached to the skirt, using 135°F (57°C) ordinary temperature clas- sification solder. When the ceiling temperature rises, the solder hold- ing the cover plate releases the cover allowing the deflector to drop into position and exposing the sprinkler inside to ceiling temperature. The subsequent operation of the solder link opens the waterway and causes the deflector to drop into position to distribute the discharging water in a hemispherical pattern below the sprinkler deflector. Any adjustment of thread engagement between the cover plate and cup will assure that the drop -down deflector is properly located below the ceiling. The residential distribution pattem contains a finer droplet size than a standard sprinkler, and the pattern produces significantly higherwall wetting. After a 25/e" inch diameter hole is cut in the ceiling, the sprinkler is to be installed with the Model FC Wrench. Installation Data: When installing a sprinkler, the wrench is first positioned into the sprinkler/cup assembly and around the hexagonal body of the sprin- kler frame. The wrench must bottom out against the cup in order to ensure proper, safe installation. The sprinkler is then tightened into the pipe fitting. When inserting or removing the wrench from the sprinkler/cup assembly, care should be taken to prevent damage to the sprinkler. DO NOT WRENCH ON ANY OTHER PARTOF THE SPRINKLER / CUP ASSEMBLY. MODEL RFC30 LL, RFC43 LL AND RFC49 LL CONCEALED SPRINKLERS MUST BE INSTALLED ONLY WITH 135°F RATED COVERS. Note: A leak tight''/2' NPT (R1/2) sprinkler joint can be obtained with a torque of 8-18 ft-lbs (10,8 - 24,4 N-m). Do not tighten sprinklers over maximum recommended torque. It may cause leakage or im- pairment of the sprinklers. Cover assemblies provide up to'/2" (13mm) of adjustment. Turn the cover clock\Mse until the flange is in contact with the ceiling. For the push-on/threadoff option, the cover assembly is pushed onto the cup and final adjustment is made by turning the cover clockwise un- til the skirt flange makes full contact with the ceiling. Cover removal Model SIN (SIN) Thread Size Inch (mm) Nominal Orifice Inch mm Sprinkler TempRatingTemp. CCP Assembly RatingAmbient Max. Temp.K Factor Max. Pressure psi(bar) OF °C OF °C OF °C RFC 30 LL (RA3211) 1/2" 15 21/64 8,2 165 74 135 57 100 38 3.0 43.2 175 12 RFC 43 LL (RA3212) 1/2" 15 3/6 10 165 74 135 57 100 38 4.3 62 175 12 RFC 49 LL (RA3216) 1/2" 15 7/6 11 165 74 135 57 100 38 4.9 70,6 175 12 Note: 1 bar = 100 Kpa RFC 30 LL Max. Coverage Max. Spacing Ordinary Temp. Rating 1650F174°C Top of Deflector Installation Minimum area Ft (m) to Ceiling Type Spacing Flow Pressure Ft x Ft (m x m) GPM Umin PSI(bar)Inch (mm) Ft (m) 12 x 12 (3,6 x 3,6) 12(3,6) 9(34,1) 9.0 (0,62) Smooth Ceilings'/2 to 1 (13 to 25.4) Beamed Ceilings per NFPA 13D, 13R or Concealed 8(2.4) 14 x 14 (4,3 x 4,3) 14(4,3) 10 (37,8) 11.0 (0,76) 13 installed in beams'/2 to 1(13 to 25.4) For Ceiling types refer to NFPA 13, 13R or 13D RFC 43 LL Max. Coverage Max. Spacing Ordinary Temp. Rating 165°F/74°C Top of Deflector Installation Minimum area Ft (m) to Ceiling Type Spacing Flow Pressure Ft x Ft (m x m) GPM Umin PSI bar Inch (mm) Ft (m) 12x12 36x36 12(3,6) 12 4,5 7.8 0,54 Smooth Ceilings'/2 to 1 (13 to 25.4) 14 x 14 (4,3 x 4,3) 14(4,3) 13 (49) 9.1 (0,63) 16 x 16 (4,9 x 4,9 16(4,9) 13 (49) 9,1(0,63) Beamed Ceilings per NFPA 13D, 13R or 13 installed in beams''/2 to 1(13 to 25.4) Concealed 8(2,4) 18 x 18 (5,5 x 5,5) 18(5,5) 18 (68) 17.5 (1,21) 20 x 20 (6,1 x 6, 1) 20(6,1) 21(79) 23.8(1,64) For Ceiling types refer to NFPA 13, 13R or 13D RFC 49 LL Max. Coverage area Ft x Ft (m x m) Max. Spacing Ft (m) Ordinary Temp. Rating 165°Fl74°C Top of Deflector to Ceiling (mm) Installation Type Minimum Spacing Ft (m) Flow GPM Umin Pressure PSI(bar)Inch 12 x 12 (3,6 x 3,6) 12(3.6) 13 (49) 7.0 0,48 Smooth Ceilings'/2 to 1(13 to 25.4) Beamed Ceilings per NFPA 13D, 13R or 13 installed in beams'/2 to 1(13 to 25.4) Concealed 8(2,4) 14 x 14 (4,3 x 4,3) 14(4,3) 13 (49) 7.0 (0,48) 16 x 16 (4,9 x 4,9) 16(4.9) 13 (49) 7.0 (0,48) 18 x 18 (5,5 x 5,5) 18 5 5 17 64 3 12.0 0 83 20 x 20 (6,1 x 6,1) 20(6,1) 20 (75,73) 16.7 (1,14) For Ceiling types refer to NFPA 13, 13R or 13D requires turning in the counter -clockwise direction. In ceilings that have a plenum space above the spdnler, the plenum space may have neutral or negative pressurization but must not be positively pressurized. Inspect all spdnlders after installation to ensure that the gap between the cover plate and ceiling and the 4 slats in the cup are all open and free from any air flow impedi- ment. Maintenance Model RFC30 LL, RFC43 LL and RFC49 LL Concealed Sprinklers should be inspected quarterly and the sprin- kler system maintained in accordance with NFPA25, Do not clean sprinklers with soap and water, ammonia or any other cleaning fluids. Remove dust by using a soft brush or gentle vacuuming. Remove any sprinkler cover plate as- sembly which has been painted (other than factory applied) or damaged in any way. A stock of spare sprinklers should be maintained to allow quick replacement of damaged or operated sprinklers. Prior to installation, sprinklers should be maintained in the original cartons and packaging until used to minimize the potential for damage to sprinklers that would cause improper operation or non -operation. Model RFC30 LL, RFC43 LL and RFC49 LL Residential Concealed Sprinkler Specification Sprinklers shall be cULus Listed and NSF-61 Annex G certified low flow residential concealed sprinklers with drop - down deflector and adjustable flat cover plate engineered for a minimum design density of 0.05gpm/ft2. Sprinkler frame and deflector shall be of bronze frame construction having a'/2" NPT thread. Thermal element shall consist of an approved black - painted beryllium -nickel fusible solder link with symmetric lever mechanism, maintaining a Teflon -coated Belleville spring washer and machined brass cap water seal assem- bly containing no plastic parts. Sprinkler K-factors shall be a nominal 3.0 (43.2), 4.3 (62) and 4.9 (70.6), having a 3/e" and '/16"orifice respectively. Temperature rating shall be Ordinary 165°F (74°C); cover plate temperature rating to be 135°F (57C). Cover plate assembly shall consist of a brass cover plate and copper alloy retainer flange allow- ing a'/2" cover plate adjustment. Any secure engagement between the cover plate and the cup will assure that the drop -down deflector is properly located below the ceiling. A plastic protective cap shall be provided and factory in- stalled inside the sprinkler cup to protect the drop -down sprinkler deflector from damage, which could occur during construction before the cover plate is installed. Standard cover finish: [Chrome] [White] [Specialty — specify]. Resi- dential concealed sprinklers shall be Reliable Model RFC30 LL, SIN RA3211 (Bulletin 032), RFC43 LL, SIN RA3212 (Bul- letin 032) or Model RFC49 LL, SIN RA3216 (Bulletin 032). Ordering Information Cover Plate Finishes') Standard Finishes Chrome White Paint Special Application Finishes(2) Bright Brass Finished Bronze Black Plating Black Paint Off White Satin Chrome Specify: 1. Sprinkler Model 2. Cover Plate Finish 3. Thread -On or Push -On Feature I* x 112" REDUCING TEE OR ELBOW r 2J" [66.55mm) 2" [58.42mm) DIA HOLE /N CEILING CUP -_ CEILING -/ C[12.70mm] MAX. OVER ADJUSTMENT CCP COVER PLATE ASSEMBLY 'J" [84.21mmj DIA. 2" [50.8mm] MAX. FACE OF FITTING TO FACE OF CEILING DIMENSION J" [4.96mm] W61WIA COVER PLATE: 112" (12.7mml ADJUSTMENT (1) Other finishes and colors are available on special order. Consult factory for details. Coverplate custom paint is semi -gloss, unless specified otherwise. (2) For the perforated style cover - plate, consult factory for avail- ability on these and other cus- tom finishes. 3. uponof Uponor AquaPEX° White Submittal Information Revision C: Oct. 7, 2009 Pro,ject`Information Job Name: Part No. Ordered: Date Submitted: Contractor: Submitted By: Manufacturer's Representative: Approved By: Technical Data Material: Crosslinked polyethylene PEX-a Engel Method; PEX 5006 Standard Grade Hydrostatic 200OF (93°C) at 80 psi Ratings (PPI): 180OF (82°C) at 100 psi 73.4°F (23°C) at 160 psi 1/2", 3/a", and 1" AquaPEXO White only: 120OF (49°C) at 130 psi Linear Expansion Rate: 1.10"/10°F (120C)/100' ProductInformatioln and Application:Use �. ._.RIC -� Uponor AquaPEX White is tubing used for hot and cold domestic potable water distribution, residential fire safety and radiant heating systems containing no ferrous corrodible components or where ferrous components are isolated from the tubino. Description Part Number I.D. (A) O.D. (B) Weight 1/a" Uponor AquaPEX White, 100-ft. coil F1040250 0.241" 0.375" 4.0 lbs. 3/8" Uponor AquaPEX White, 400-ft. coil F1090375 0.350" 0.500" 20.0 lbs. 3/8 Uponor AquaPEX White, 1,000-ft. coil F1120375 0.350" 0.500" 44.0 lbs. 1/2" Uponor AquaPEX White, 100-ft. coil* F1040500 0.475" 0.625" 6.0 lbs. 1/2" Uponor AquaPEX White, 300-ft. coil* F1060500 0.475" 0.625" 18.0 lbs. 1/2" Uponor AquaPEX White, 1,000-ft. coil* F1120500 0.475" 0.625" 54.0 lbs. 5/4" Uponor AquaPEX White, 300-ft. coil F1060625 0.574" 0.750" 28.0 lbs. 5/e" Uponor AquaPEX White, 3000-ft. coil F1120625 0.574" 0.750" 86.0 lbs. 3/4" Uponor AquaPEX White, 100-ft. coil* F1040750 0.671" 0.875" 10.0 lbs. 3/4" Uponor AquaPEX White, 300-ft. coil* F1060750 0.671" 0.875" 34.0 lbs. 3/4" Uponor AquaPEX White, 500-ft. coil* F1100750 0.671" 0.875" 54.0 lbs. 1" Uponor AquaPEX White, 100-ft. coil* F1041000 0.862" 1.125" 20.0 lbs. 1" Uponor AquaPEX White, 300-ft. coil* F1061000 0.862" 1.125" 56.0 lbs. 1" Uponor AquaPEX White, 500-ft. coil* F1101000 0.862" 1.125" 93.0 lbs. 11/4" Uponor AquaPEX White, 100-ft. coil F1061250 1.054" 1.375" 34.0 lbs. 11/4" Uponor AquaPEX White, 300-ft. coil F1021250 1.054" 1.375" 106.0 lbs. 11/2" Uponor AquaPEX White, 100-ft. coil F1061500 1.244" 1.625" 44.0 lbs. 11/2" Uponor AquaPEX White, 300-ft. coil F1021500 1.244" 1.625" 133.0 lbs. 2" Uponor AquaPEX White, 100-ft. coil F1062000 1.629" 2.125" 68.2 lbs. 2" Uponor AquaPEX White, 200-ft. coil F1052000 1.629" 2.125" 136.4 lbs. 2" Uponor AquaPEX White, 300-ft. coil F1022000 1.629" 2.125" 204.6 lbs. 3" Uponor AquaPEX White, 100-ft. coil F1063000 2.400" 3.125" 128.0 lbs. 3" Uponor AquaPEX White, 350-ft. coil F1023000 2.400" 3.125" 442.0 lbs. Installation Approved fittings are ProPEX° fittings' for sizes 3/e" through 2" AquaPEX. Use WIPEXTM fittings for 3" AquaPEX. Refer to the AquaPEX Professional Plumbing Installation Handbook, AquaSAFET" Fire Safety Installation Guide or the Uponor Radiant Installation Handbook for details. Standards. Codes Listings CSA B137.5; ASTM F876; ASTM IPC; UPC; *1/2", 3/4", 1" UL 1821; *ULC/ORD - C 199 P; IAPMO; CSA; HUD; WARNOCK HERSEY; NSF; F877; ASTM F1960; ASTM-E84; NSPC; NPC ITS; UL; ICC; ANSI/NSF 14- and 61-certified; CAN/ULC 5102.2; U.S.: 3/4" diameter and ASTM-E119/UL 263 of Canada smaller; Canada: 1" diameter and smaller Related Applications Contact Information PEX-a Plumbing Systems AquaSAFE Fire Safety Systems Uponor, Inc. 5925 148`h Street West Apple Valley, MN 55124 USA Phone: (800) 321-4739 Fax: (952) 891-2008 www.uponor-usa.com 1ProPEX® is a registered trademark of Uponor, Inc. ProPEX' is a trademark of Uponor Ltd. Uponor Ltd. 2000 Argentia Rd., Plaza 1, Ste. 200 Mississauga, ON L5N 1W1 CANADA Phone: (888) 994-7726 Fax: (800) 638-9517 www.uponor.ca uponof ProPEXO Ring Submittal Information Revision A: March 17, 2009 Project Information Job Name: Location: Part No. Ordered: Engineer: Date Submitted: Contractor: Submitted By: Manufacturer's Representative: Approved By: Technical' Data --�� Material: PEX-a (Engel Method) t Density: 926 to 940 kg/m3 Degree of Crosslinking: 70% to 89% Product Information and Application Use Manufactured from PEX-a material, Uponor ProPEX° Rings are required to make a proper ProPEX connection.' Red print on the rings indicates hot lines. The 1/2" and 3/4" ProPEX rings with stop includes a leading edge chamfer and stop edge. ✓ Description Part Number Length i.d. o.d. Weight ProPEX Ring, 3/8" Q4690302 0.54" 0.49" 0.74" 0.005 lbs. ProPEX Ring with Stop, 1/2" (red print) Q4690511 0.63" 0.63" 0.87" 0.006 lbs. ProPEX Ring with Stop, 1/2" Q4690512 0.63" 0.63" 0.87" 0.006 lbs. ProPEX Ring, 5/8" Q4680625 0.79" 0.75" 1.00" 0.008 lbs. ProPEX Ring with Stop, 3/4" Q4690756 0.87" 0.88" 1.13" 0.012 lbs. ProPEX Ring, 1" Q4681000 1.10" 1.13" 1.42" 0.020 lbs. ProPEX Ring, 11/4" Q4681250 1.35" 1.38" 1.66" 0.030 lbs. ProPEX Ring, lye" Q4681500 1.61" 1.63" 1.91" 0.040 lbs. ProPEX Ring, 2" Q4682000 1.97" 2.14" 2.61" 0.133 lbs. Installation Square cut the Uponor ProPEX tubing. Remove excess material. Slide the ProPEX Ring over the end of the tubing (maximum'/,e' over -hang). When using the 1/2" ProPEX Ring with stop edge, slide the ring on (i.e., chamfered edge first) until the end of the tubing contacts the stop edge. Expand tubing and ring. Rotate tool a quarter turn after each expansion to prevent the formation of grooves. Remove the expansion tool and fully seat the tubing and ring against the shoulder of the fitting. You should make ProPEX connections at temperatures above 5°F /-15°C. For more information, refer to the AquaPEX° Professional Plumbing Installation Handbook, AQUASAFE° Fire Safety Installation Guide or the Uponor Radiant Installation Handbook. Standards ASTM F1960 Codes, IPC; UPC; NSPC; NPC of Canada Listings UL 1821 (1/2", 3/4" and 1"); ULC/ORD - C 199 P (1/2", 3/4" and 1"); HUD MR 1269; ICC ESR 1099; ANSI/NSF 14- and 61-certified Related;Appltcations Contact Information PEX-a Plumbing Systems Uponor, Inc. Uponor Ltd. Radiant Heating and Cooling Systems 5925 148th Street West 2000 Argentia Rd., Plaza 1, Ste. 200 AQUASAFE Fire Safety Systems Apple Valley, MN 55124 USA Mississauga, ON L5N SW1 CANADA Phone: (800) 321-4739 Phone: (888) 994-7726 Fax: (952) 891-2008 Fax: (800) 638-9517 www.uponor-usa.com www.uponor.ca 'ProPEX® is a registered trademark of Uponor, Inc. ProPEX" is a trademark of Uponor Ltd. ProPEX® Engineered Polymer (EP) Tee Submittal Information Revision D: June 8, 2012 P„toject:Info rmation Job Name: uponof Location: Part No. Ordered: Engineer: Date Submitted: Contractor: Submitted By: Manufacturer's Representative: Approved By: Technical Data Material: UDELO Polysulfone, 20% Glass -reinforced (1/2" to 1") Acudel® Modified Polyphenylsulfone (11/4" to 11/2") Radel° Polyphenylsulfone (2") Maximum Temperature (no pressure): 320°F(160°C) Maximum Working Temperature/Pressure: 210OF (99°C) at 150 psi (1,034 kPa) PrOu"ctInformation and Application Use The ProPEX® Engineered Polymer (EP) Tee makes diverting connections for Uponor crosslinked polyethylene (PEX-a) tubing for use in hot and cold domestic potable water systems, residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX® or Wirsbo hePEXT tubing.' Note: Branch size is listed last in the part descriptions. Description' Part Number A B Weight ❑ ProPEX EP Tee, 1/2" PEX x 1/2" PEX x 1/2" PEX Q4755050 2.50" 1.53" 0.02 lbs. ❑ ProPEX EP Tee, 3/4" PEX x 3/4" PEX x 3/4" PEX Q4757575 3.30" 1.94" 0.05 lbs. ❑ ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX Q4751010 4.10" 2.47" 0.07 lbs. ❑ ProPEX EP Tee, 11/4" PEX x 11/4" PEX x 11/4" PEX Q4751313 4.80" 3.22" 0.15 lbs. ❑ ProPEX EP Tee, 1'/2" PEX x 11/2" PEX x 11/2" PEX Q4751515 5.80" 3.82" 0.25 lbs. ❑ ProPEX EP Tee, 2" PEX x 2" PEX x 2" PEX Q4752000 7.45" 4.79" 0.38 lbs. Installaon.: Use the appropriate ProPEX Ring for PEX-a tubing. Refer to the Uponor AquaPEX° Professional Plumbing Installation Guide, AquaSAFETM Residential Fire Sprinkler Installation Guide or Uponor Radiant Installation Handbook for additional information. Standards CAN/CSA B137.5; ASTM F877; ASTM F1960 Codes; IPC; UPC; NSPC; NPC of Canada Listings: IAPMO 3558; ANSI/NSF 14- and 61-certified; HUD MR 1269; ICC ESR 1099; UL 1821; ULC/0RD-C199P Related;Applications Contact Information PEX-a Plumbing Systems Uponor, Inc. Uponor Ltd. Hydronic Radiant Heating and Cooling Systems 5925 148`" Street West 2000 Argentia Road, Plaza 1, Suite 200 Snow Melting Systems Apple Valley, MN 55124 USA Mississauga, ON L5N 1W1 CANADA Turf Conditioning Systems Phone: (800) 321-4739 Phone: (888) 994-7726 Permafrost Prevention Systems Fax: (952) 891-2008 Fax: (800) 638-9517 AquaSAFE Fire Safety Systems www.uponorpro.com www.uponorpro.com 1ProPEX® is a registered trademark of Uponor, Inc. ProPEX'" is a trademark of Uponor Ltd. ProPEX® Engineered Polymer (EP) Reducing Tee uponof Submittal Information Revision E: June 8, 2012 Pr oject;Information Part No. Ordered: Date Submitted: Contractor: Submitted By: Manufacturer's Representative: Approved By: Technical Data Material: UDELO Polysulfone, 20% Glass -reinforced (1/2 to 1") Acudel® Modified Polyphenylsulfone (11/4" to 11/2") Radel® R Polyphenylsulfone (2") Maximum Temperature (no pressure): 320°F (160°C) Max. Working Temperature/Pressure: 210OF (99°C) at 150 psi (1,034 kPa) Product Information and Application Use The ProPEX° Engineered Polymer (EP) Reducing Tee makes diverting connections for Uponor crosslinked polyethylene (PEX-a) tubing for use in hot and cold domestic potable water systems, residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX® or Wirsbo hePEX•" tubing.' Note: Branch size is listed last in the part descriptions. ✓ ;"Descripti-on Part Number Length (A) Height (B) Weight ❑ ProPEX EP Reducing Tee, 1/2' PEX x'/2" PEX x 3/4" PEX Q4755575 2.86" 1.76" 0.03 lbs. ❑ ProPEX EP Reducing Tee, 3/4" PEX x'/2" PEX x'/2" PEX Q4757555 3.10" 1.70" 0.04 lbs. ❑ ProPEX EP Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX Q4757557 3.10" 1.94" 0.04 lbs. ❑ ProPEX EP Reducing Tee, 3/4" PEX x 3/4" PEX x 5/s" PEX Q4757563 3.30" 1.85" 0.05 lbs. ❑ ProPEX EP Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX Q4757550 3.30" 1.70" 0.04 lbs. ❑ ProPEX EP Reducing Tee, 3/4" PEX x 3/4" PEX x 1" PEX Q4757710 3.64" 2.32" 0.08 lbs. ❑ ProPEX EP Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX Q4751775 3.90" 2.24" 0.08 lbs. ❑ ProPEX EP Reducing Tee, 1" PEX x 3/4" PEX x 1" PEX Q4751751 3.90" 2.47" 0.08 lbs. ❑ ProPEX EP Reducing Tee, 1" PEX x 1" PEX x'/2" PEX Q4751150 4.10" 2.00" 0.08 lbs. ❑ ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX Q4751175 4.10" 2.24" 0.09 lbs. ❑ ProPEX EP Reducing Tee, 11/4" PEX x 1" PEX x 3/4" PEX Q4751317 4.60" 2.73" 0.11 lbs. ❑ ProPEX EP Reducing Tee, 11/4" PEX x 1" PEX x 1" PEX Q4751311 4.60" 2.97" 0.12 lbs. ❑ ProPEX EP Reducing Tee, 11/4" PEX x 11/4" PEX x 3/4" PEX Q4751337 4.80" 2.73" 0.13 lbs. ❑ ProPEX EP Reducing Tee, 11/4" PEX x 11/4" PEX x 1" PEX Q4751331 4.80" 2.97" 0.14 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 1" PEX x 3/4" PEX Q4751517 5.25" 3.06" 0.17 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 1" PEX x 1" PEX Q4751511 5.25" 3.30" 0.18 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x 3/4" PEX Q4751537 5.50" 2.65" 0.18 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 11/4 PEX x 1" PEX Q4751531 5.50" 2.85" 0.19 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x 11/4" PEX Q4751533 5.50" 3.15" 0.21 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 11/2" PEX x 3/4" PEX Q4751557 5.80" 3.06" 0.20 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 11/2" PEX x 1" PEX Q4751551 5.75" 3.30" 0.21 lbs. ❑ ProPEX EP Reducing Tee, 11/2" PEX x 11/2" PEX x 11/4" PEX Q4751553 5.80" 3.56" 0.22 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 11/7.' PEX x 3/4" PEX Q4752575 6.62" 3.30" 0.30 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 11/2" PEX x 1" PEX Q4752051 6.50" 3.40" 0.30 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 11/2" PEX x 11/4" PEX Q4752053 6.62" 3.80" 0.34 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 11/2" PEX x 11/2" PEX Q4752055 6.62" 4.10" 0.35 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 3/4" PEX Q4752275 6.93" 3.30" 0.34 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 1" PEX Q4752210 6.93" 3.40" 0.36 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 11/4" PEX Q4752213 6.62" 3.80" 0.37 lbs. ❑ ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 11/2" PEX .. ._. Q4752215 7._13"_ 4.10" 0.44 lbs. Installation Use the appropriate ProPEX Ring for PEX-a tubing. Refer to the Uponor AquaPEX° Professional Plumbing Installation Guide, AquaSAFE' Residential Fire Sprinkler Installation Guide or Uponor Radiant Installation Handbook for additional information. Standards Codes Listings CAN/CSA B137.5; ASTM F877; IPC; UPC; NSPC; NPC of Canada NSF U.P. CODE; ANSI/NSF 14- and 61-certified; HUD MR 1269; ASTM F1960 ICC ESR 1099;_ UL 1821and ULC/ORD-C199P (except Q4757563) RelaIt d,Applications Contact Information PEX-a Plumbing Systems Uponor, Inc. Uponor Ltd. Hydronic Radiant Heating and Cooling Systems 5925 148`" Street West 2000 Argentia Rd., Plaza 1, Ste. 200 Snow and Ice Melting Systems Apple Valley, MN 55124 USA Mississauga, ON L5N 1W1 CANADA Turf Conditioning Systems Phone: (800) 321-4739 Phone: (888) 994-7726 Permafrost Protection Systems Fax: (952) 891-2008 Fax: (800) 638-9517 AquaSAFE Fire Safety Systems www.uponorpro.com www.uponorpro.com 1ProPEX8 is a registered trademark of Uponor, Inc. ProPEX' is a trademark of Uponor Ltd. UP0110f ProPEX Engineered Polymer (EP) Elbow Submittal Information Revision D: June 8, 2012 Project -Information Job Name: Location: Part No. Ordered: Engineer: Date Submitted: Contractor: Submitted By: Manufacturer's Representative: Approved By: Technical -Data Material: UDELO Polysulfone, 20% Glass -reinforced (1/2 to 1") Acudel® Modified Polyphenylsulfone (11/4" to 11/2") Radel° R Polyphenylsulfone (2") Maximum Temperature (no pressure): 320°F(1600C) Maximum Working Temperature/Pressure: 210OF (99°C) at 150 psi (1,034 kPa) Product Information and Application Use The ProPEX2) Engineered Polymer (EP) Elbow makes 90-degree connections for Uponor crosslinked polyethylene (PEX-a) tubing for use in hot and cold domestic potable water systems, residential fire safety and hydronic radiant heating and cooling systems. Each end of the elbow is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX° or Wirsbo hePEXTM tubing.' Description Part A B Weight Number ❑ ProPEX EP Elbow, 1/2" PEX x 1/2" PEX Q4760500 1.30" 1.30" 0.02 lbs. ❑ ProPEX EP Elbow, 3/4" PEX x 3/4" PEX Q4760750 1.60" 1.60" 0.03 lbs. ❑ ProPEX EP Elbow, 1" PEX x 1" PEX Q4761000 2.10" 2.10" 0.07 lbs. ❑ ProPEX EP Elbow, 11/4" PEX x 11/4" PEX Q4761250 2.45" 2.45" 0.11 lbs. ❑ ProPEX EP Elbow, 11/2" PEX x 11/2" PEX Q4761500 2.77" 2.77" 0.18 lbs. ❑ ProPEX EP Elbow, 2" PEX x 2" PEX Q4762000 3.76" 3.76" 0.30 lbs. Installation Use the appropriate ProPEX Ring for PEX-a tubing. Refer to the Uponor AquaPEX° Professional Plumbing Installation Guide, AquaSAFETM Residential Fire Sprinkler Installation Guide or Uponor Radiant Installation Handbook for additional information. Standards CAN/CSA B137.5; ASTM F877; ASTM F1960 Codes IPC; UPC; NSPC; NPC of Canada Listings IAPMO 3558; ANSI/NSF 14- and 61-certified; HUD MR 1269; ICC ESR 1099; UL 1821; ULC/ORD-C199P r Related Applications Contact Information PEX-a Plumbing Systems Uponor, Inc. Uponor Ltd. Hydronic Radiant Heating and Cooling Systems 5925 148'h Street West 2000 Argentia Road, Plaza 1, Suite 200 Snow Melting Systems Apple Valley, MN 55124 USA Mississauga, ON L5N 1W1 CANADA Turf Conditioning Systems Phone: (800) 321-4739 Phone: (888) 994-7726 Permafrost Prevention Systems Fax: (952) 891-2008 Fax: (800) 638-9517 AquaSAFE Fire Safety Systems www.uponorpro.com www.uponorpro.com 1ProPEX9 is a registered trademark of Uponor, Inc. ProPEX'" is a trademark of Uponor Ltd. ProPEX° Fire Sprinkler Adapter Submittal Information Revision B: March 17, 2009 Prmo�ect Information � . _ _ . __ . uponof Location: Part No. Ordered: Engineer: Date Submitted: Contractor: Submitted By: Manufacturer's Representative: Approved By: Technical Data Material: 300 Series Stainless Steel Product Information and Application Use Use the ProPEX° Fire Sprinkler Adapter in conjunction with the appropriate sprinkler to provide a multi -purpose residential fire sprinkler system'. For residential applications, the system is installed with the cold -potable portion of the Uponor plumbing system. Make connections with Uponor ProPEX fittings. These fittings are designed for use only with 3/4" or 1" AquaPEX° White tubing in the Uponor AQUASAFE® Looped System. Part A Description : B C D- E, W - eight Number_ . _. ProPEX Fire Sprinkler Adapter, 3/4" PEX x 1/2" FNPT Q7517550 0.75" 1.88" 2.50" 1.82" 1.41" 0.268 lbs. ProPEX Fire Sprinkler Adapter, 1" PEX x 1/2" FNPT Q7511050 0.75" 1.88" 2.50" 2.06" 1.54" 0.408 lbs. °Installation Use appropriate ProPEX Ring for connecting the tubing. Refer to the AquaPEX Installation Handbook or the Uponor AQUASAFE° Installation Guide for additional information. standards. CAN/CSA B137.5; ASTM F877; ASTM F 1960 Codes. - IPC; UPC; NSPC; IRC; IMC; NPC of Canada L stings , ANSI/NSF 14- and 61-certified; U.P. Code; ICC ESR 1099; HUD MR 1269; UL 1821; ULC/ORD - C 199 P Related Applications Contact Information PEX-a Plumbing Systems Uponor, Inc. Uponor Ltd. AQUASAFE Fire Safety Systems 5925 1481" Street West 2000 Argentia Rd., Plaza 1, Ste. 200 Apple Valley, MN 55124 USA Mississauga, ON L5N 1W1 CANADA Phone: (800) 321-4739 Phone: (888) 994-7726 Fax: (952) 891-2008 Fax: (800) 638-9517 www.uponor-usa.com www.uponor.ca 'ProPEX® is a registered trademark of Uponor, Inc. ProPEX'" is a trademark of Uponor Ltd. The Design Criteria for Sloped & Sloped Beamed Ceilings in NFPA 13D One and Two Family Dwellings & Manufactured Homes Has Changed. f L � L A � �B L�1 c111AI. n LISTED AREA OF COVERAGE CORRESPONDS TO CEILING SLOP L - THE MAXIMUM LISTED SPRINKLER SPACING LENGTH 00'4'MAXIMUR (8'-0• MINIMUMI . L12 - ONE HALF THE MAXIMUM LISTED SPRINKLER SPACING (5-0• MAXIMUM (4'.0•MINIMUM) W - THE MAXIMUM LISTED SPRINKLER SPACING.WIDTH (10'. . A • 3'4Y MAXIMUM. B-RANGE:2A2 (B.s1<Bs8n2 (33Y) , C • 8'4' MINIMUM. C eL A t.-B•C p•[•PMINWUY A - r • v u�xlwurr n "Am awm A Tentative Interim Amendment (TIA No.1028R) to NFPA 13D for 2010 has been issued by the NFPA Standards Council. Testing supported by The Fire Protection Research Foundation indicates that residential sprinklers listed for applications with smooth, flat ceilings can meet the stated purpose in NFPA 13D standards when installed on a sloped or sloped and beamed ceiling. Sloped and Sloped/Beamed Ceilings, under certain conditions, can now be protected with residential sprinklers based upon a maximum two (2) sprinkler demand that has the same flow rate as the sprinklers smooth, flat ceiling listing. The TIA No.102811 revises NFPA 13D - 2010 edition sections`'8.1.2, 8.1.3, A.8 ,1.2, and A.8.1.3. Please read and adhere to these sections for the complete new design criteria. A brief recap: 1 The sprinklers in the design area shall be all of the sprinklers in a compartment, up to a maximum of two, which require the greatest demand for: • Smooth, flat ceilings to a maximum 24 feet in height. • Smooth, ceilings (with no beams) sloped up to 8/12 and a maximum ceiling height of 24' above the floor. • A ceiling with beams up to 14" deep sloped up to 8/12 and a maximum ceiling ,r f. height of 24' above the floor. Pendent sprinklers shall be installed under the beams and the compartment cannot exceed 600 square feet. • / A ceiling with beams of any depth sloped up to 8/12 and a maximum ceiling height of 24' above the floor. Sidewall or pendent sprinklers shall be installed in each pocket formed by the beams and the compartment cannot exceed 600 square feet. This TIA is for 13D applications only. Changes to 13R will be in the 2013 Edition. Our special 10;x 10' spacing listings for sloped ceilings are still advantageous for 13R installations. (See Table 9, Bulletin 035). For any questions, please contact Technical Services at 1-800-55-RASCO. The Reliable Automatic Sprinkler Co., Inc. • Manufacturer & Distributor of Fire Protection Equipment wwwreliablesprinkler-com 9 1.80OA31.1588 RECEIVED OCT 3 0 2015 DEVELUVIVIENT SERVICES CTR. CITY OF EDMONDS APPROVED FIRE DEPARTMEW D�EgIGN SERA A-PEX Design Services, Inc.-EP 10731 47th •Place West Mukilteo, WA 98275 425-493-9680 sales@a-pexdesignservices.com Job Name : OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Drawing Location 9221 OLYMPIC AVE EDMONDS WA 98026 Remote Area Contract 151007-06 Data File 151007-06 Olson Residence.wx2 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 A-PEX Design Services, Inc.-EP Page 1 OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 HYDRAULIC DESIGN INFORMATION SHEET Name - OLSON RESIDENCE Date - 10-08-2015 Location - EDMONDS WA 98026 Building - System No. - Contractor - NEW WAY ENERGY Contract No. - 151007-06 Calculated By - STEPHANIE FAHEY Drawing No. - Construction: (X) Combustible ( ) Non -Combustible Ceiling Height OCCUPANCY - RESIDENTIAL S Type of Calculation: ( )NFPA 13 Residential ( )NFPA 13R (X)NFPA 13D Y Number of Sprinklers Flowing: ( )l (X)2 ( )4 ( ) S ( ) Other T ( .)Specific Ruling Made by Date E M Listed Flow at Start Point - 13 Gpm System Type Listed Pres. at Start Point - 7.04 Psi (X) Wet ( ) Dry D MAXIMUM LISTED SPACING 16 x 16 ( ) Deluge ( ) PreAction E Domestic Flow Added - 0 Gpm Sprinkler or Nozzle S Additional.Flow Added - Gpm Make RELIABLE Model LL-RFC49 I Elevation at Highest Outlet- 116 Feet Size 3/8 K-Factor 4.9 G Note: Temperature Rating 155 N Calculation Gpm Required 26.2342 Psi Required 54.28 At Ref Pt STR Summary C-Factor Used: Overhead 150 Underground 150 W Water Flow Test: Pump Data: Tank or Reservoir: A Date of Test - Rated.Cap. Cap. T Time of Test - @ Psi Elev. E Static (Psi) - 70 Elev. R Residual (Psi) - 65 Other Well Flow (Gpm) - 300 Proof Flow Gpm S Elevation - 100 P Location: P L Source of Information: Y r Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 0 N N O iV O It d O Cl) MO MO Q)NN Nlp O N N � N .. .. .. .. N.. ap .. m 3 y--E o a) cLa- mp = O =EEEEI >(D(U a) a) m o >, >,p i,� w to U) U) y CNN OM m MCOOMOcn E a� p 0 0 v O M In OR O < O Z M O J W N od LO O N cM 2 c 0 m 3 U O O N U OLO n N 6 f- (D Cl) m N w = 7 O O U c: y 3 U)0 0 U w �a� U m m Q O O W m >+ top � }, a> a� V ❑ p, rn N v� co m � �UUU pZ . a) X O o Ln O q O m o N 0 0 O O O O O O Ln O O 'IT M O N 0 tC [l J U lL W W to to p W Q0 r- 0 0 co O Q U) z E z c N O U C U m U T 2 N E m O d N 7 a E O U to r-CO��000 r O N O M _,q- 0 0 0 0 N O) --. t6 f0 da �v00 0000 �Mnr�000 n o � 04f0'(0000 N O a0 M M 0 0 0 M C07 0 0 0 �eNLO -•NN000 N N 0 0 0 n �op��000' N 0 con Mtn -- -- C) N C N a- M e- (O H M V N IT M O N 7 f6 U 13 as w= U C — N 0I o 7 � m(D co uj U ZZ L) a) a) 4) 14—, , N w > " In 0-0 x x x N p)(n d CCU)(DLLmMm •tn W NC C E c > > > m Op dp QQQ o Z p)Z a)(9a) << XO a� �> c w U) c" LL Q� LL< 0wC9H»� L O U r C C_ N 7 i cr d Cf) N C 0)O O. U) M -0 N r () C C LL D COL m � � E •� � c � E C y � += (D U) y �3 N • c�a�oa� D .J LL d Flow Surnmary - NFPA 2007 A-PEX Design Services, Inc.-EP Page 4 OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 SUPPLY ANALYSIS Node at Static Residual Available Source Pressure Pressure . Flow Pressure Total Demand Required Pressure STR 70.0 65 300.0 69.945 26.23 54.285 NODE ANALYSIS Pressure Discharge Node Tag Elevation Node Type at Node at Node Notes H.30 116.0 4.9 7.04 13.0 H.18 116.0 7.95 T.44 116.0 8.14 H.22 116.0 8.98 T.45 116.0 9.28 H.17 116.0 9.47 H.7 116.0 10.0 H.6 116.0 10.68 T.33 116.0 12.35 H.1 116.0 12.59 HA 116.0 13.05 T.39 116.0 13.4 T.37 108.0 19.34 S.1 104.0 22.34 CPL 100.0 35.97 MTR 100.0 40.24 STR 100.0 54.28 H.21 116.0 4.9 7.29 13.23_ T.47 116.0 11.59 H.13 116.0 12.07 T.34 116.0 12.44 T.38 108.0 17.99 H.15 108.0 18.27 T.42 108.0 18.39 H.16 108.0 18.6 T.35 108.0 19.23 T.36 108.0 19.28 T.46 116.0 11.96 H.23 116.0 12.64 T.48 116.0 12.89 H.26 116.0 13.14 T.51 116.0 13.24 H.31 116.0 13.25 T.49 116.0 13.43 H.28 116.0 12.39 H.32 116.0 12.85 H.27 116.0 13.12 H.8 116.0 12.41 H.19 116.0 13.03 T.40 116.0 13.17 H.11 116.0 13.22 H.12 116.0 13.32 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 Flow Surnmary - NFPA 2007 A-PEX Design Services, Inc.-EP Page 5 OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 NODE ANALYSIS (cont.) Pressure Discharge Node Tag Elevation Node Type at Node at Node Notes H.9 108.0 18.09 H.14 108.0 18.2 T.43 108.0 18.38 TAI 108.0 18.4 H.5 108.0 18.5 H.2 108.0 18.69 H.3 108.0 18.9 H.10 108.0 19.1 H.20 108.0 18.38 H.24 108.0 18.38 T.50 108.0 18.38 H.29 108.0 18.38 H.25 108.0 18.39 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 Final Cailculations - Hazen -Williams A-PEX Design Services, Inc.-EP Page 6 OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn H.30 7.66 0.862 Utr 2.0 22.000 7.040 K Factor = 4.90 to 150.0 0.0 2.000 0.0 H.18 7.66 0.0380 0.0 24.000 0.911 Vel = 4.21 H.18 0.0 0.862 Utr 2.0 3.000 7.951 to 150.0 0.0 2.000 0.0 T.44 7.66 0.0378 0.0 5.000 0.189 Vel = 4.21 T.44 0.0 0.862 Uel 11.0 10.000 8.140 to 150.0 0.0 12.000 0.0 H.22 7.66 0.0380 0.0 22.000 0.835 Vel = 4.21 H.22 0.0 0.862 0.0 8.000 8.975 to 150.0 0.0 0.0 0.0 T.45 7.66 0.0380 0.0 8.000 0.304 Vel = 4.21 T.45 0.0 0.862 Utr 2.0 3.000 9.279 to 150.0 M 2.000 0.0 H.17 7.66 0.0378 0.0 5.000 0.189 Vel = 4.21 H.17 0.0 0.862 Utr 2.0 12.000 9.468 to 150.0 0.0 2.000 0.0 H.7 7.66 0.0380 0.0 14.000 0.532 Vel = 4.21 H.7 0.0 0.862 Utr 2.0 16.000 10.000 to 150.0 0.0 2.000 0.0 H.6 7.66 0.0379 0.0 18.000 0.682 Vel = 4.21 H.6 0.0 0.862 Utb 17.0 18.000 10.682 to 150.0 Uel 11.0 26.000 0.0 T.33 7.66 0.0380 0.0 44.000 1.670 Vel = 4.21 T.33 -2.32 0.862 Utr 2.0 10.000 12.352 to 150.0 0.0 2.000 0.0 H.1 5.34 0.0195 0.0 12.000 0.234 Vel = 2.94 HA 0.0 0.862 Utr 2.0 22.600 12.586 to 150.0 0.0 2.000 0.0 HA 5.34 0.0195 0.0 24.000 0.468 Vel = 2.94 H.4 0.0 0.862 Utr 2.0 16.000 13.054 to 150.0 0.0 2.000 0.0 T.39 5.34 0.0194 0.0 18.000 0.350 Vel = 2.94 T.39 3.69 0.862 2Utb 34.0 20.000 13.404 to 150.0 0.0 28.000 3.465 T.37 9.03 0.0515 0.0 48.000 2.470 Vel = 4.96 T.37 17.20 1.244 Utr 2.0 15.000 19.339 to 150.0 T 3.443 5.443 1.732 S.1 26.23 0.0620 0.0 20.443 1.268 Vel = 6.92 S.1 to CPL 0.0 26.23 1.244 150.0 0.0620 E T G 1.721 3.443 0.43 25.000 5.594 30.594 22.339 11.732 1.898 * * Fixed Loss = 10 Vel = 6.92 CPL 0.0 1.244 2E 3.443 65.000 35.969 to 150.0 C 0.43 3.873 0.0 MTR 26.23 0.0620 0.0 68.873 4.271 Vel = 6.92 MTR 0.0 1.025 2E 5.4 20.000 40.240 to 150.0 0.0 5.400 10.000 * * Fixed Loss = 10 STR 26.23 0.1593 0.0 25.400 4.045 Vel = 10.20 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 Final Calculations - Hazen -Williams A-PEX Design Services, Inc.-EP Page 7 OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes ****** Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 0.0 26.23 54.285 K Factor = 3.56 H.30 5.34 0.862 0.0 13.000 7.040 to 150.0 0.0 0.0 0.0 H.21 5.34 0.0195 0.0 13.000 0.253 Vel = 2.94 H.21 13.24 0.862 Uel 11.0 10.000 7.293 K Factor = 4.90 to 150.0 0.0 12.000 0.0 T.47 18.58 0.1955 0.0 22.000 4.300 Vel = 10.21 T.47 -12.26 0.862 Utb 17.0 4.000 11.593 to 150.0 0.0 14.000 0.0 H.13 6.32 0.0266 0.0 18.000 0.478 Vel = 3.47 H.13 0.0 0.862 Utr 2.0 12.000 12.071 to 150.0 0.0 2.000 0.0 T.34 6.32 0.0266 0.0 14.000 0.372 Vel = 3.47 T.34 2.31 0.862 2Utb 34.0 16.000 12.443 to 150.0 0.0 28.000 3.465 T.38 8.63 0.0474 0.0 44.000 2.084 Vel = 4.74 T.38 -3.25 0.862 Uel 11.0 2.000 17.992 to 150.0 0.0 12.000 0.0 H.15 5.38 0.0197 0.0 14.000 0.276 Vel = 2.96 H.15 0.0 0.862 0.0 6.000 18.268 to 150.0 0.0 0.0 0.0 T.42 5.38 0.0197 0.0 6.000 0.118 Vel = 2.96 T.42 0.21 0:862 Utr 2.0 8.000 18.386 to 150.0 0.0 2.000 0.0 H.16 5.59 0.0212 0.0 10.000 0.212 Vel = 3.07 H.16 0.0 0.862 Utb 17.0 4.000 18.598 to 150.0 Uel 11.0 26.000 0.0 T.35 5.59 0.0212 0.0 30.000 0.636 Vel = 3.07 T.35 3.04 1.244 Utr 2.0 4.000 19.234 to 150.0 0.0 2.000 0.0 T.36 8.63 0.0080 0.0 6.000 0.048 Vel = 2.28 T.36 8.57 1.244 0.0 2.000 19.282 to 150.0 0.0 0.0 0.0 T.37 17.2 0.0285 0.0 2.000 0.057 Vel = 4.54 0.0 17.20 19.339 K Factor = 3.91 T.47 12.26 0.862 Utr 2.0 2.000 11.593 to 150.0 0.0 2.000 0.0 T.46 12.26 0.0905 0.0 4.000 0.362 Vel = 6.74 T.46 -5.23 0.862 Utr 2.0 19.000 11.955 to 150.0 0.0 2.000 0.0 H.23 7.03 0.0324 0.0 21.000 0.680 Vel = 3.86 H.23 0.0 0.862 0.0 8.000 12.635 to .150.0 0.0 0.0 0.0 T.48 7.03 0.0324 0.0 8.000 0.259 Vel = 3.86 T.48 -3.69 0.862 Utb 17.0 4.000 12.894 to 150.0 Uel 11.0 26.000 0.0 H.26 3.34 0.0082 0.0 30.000 0.246 Vel = 1.84 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 Final Calculations - Hazen -Williams A-PEX Design Services, Inc.-EP Page 8 OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 G - - Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn H.26 0.0 0.862 Utr 2.0 10.000 13.140 to 150.0 0.0 2.000 0.0 T.51 3.34 0.0082 0.0 12.000 0.098 Vel = 1.84 T.51 0.0 0.862 0.0 2.000 13.238 to 150.0 0.0 0.0 0.0 H.31 3.34 0.0080 0.0 2.000 0.016 Vel = 1.84 H.31 0.0 0.862 Uel 11.0 10.000 13.254 to 150.0 0.0 12.000 0.0 T.49 3.34 0.0082 0.0 22.000 0.180 Vel = 1.84 T.49 5.23 0.862 20tb 34.0 23.000 13.434 to 150.0 0.0 28.000 3.465 T.36 8.57 0.0467 0.0 51.000 2.383 Vel = 4.71 0.0 8.57 19.282 K Factor = .1.95 T.46 5.23 0.862 Utb 17.0 7.000 11.955 to 150.0 Utr 2.0 16.000 0.0 H.28 5.23 0.0187 0.0 23.000 0.431 Vel = 2.88 H.28 0.01 0.862 Utr 2.0 23.000 12.386 to 150.0 0.0 2.000 0.0 H.32 5.23 0.0187 0.0 25.000 0.468 Vel = 2.88 H.32 0.0 0.862 0.0 14.000 12.854 to 150.0 0.0 0.0 0.0 H.27 5.23 0.0187 0.0 14.000 0.262 Vel = 2.88 H.27 0.0 0.862 Utr 2.0 3.000 13116 to 150.0 Uel 11.0 14.000 0.0 T.49 5.23 0.0187 0.0 17.000 0.318 Vel = 2.88 0.0 5.23 13.434 K Factor = 1.43 T.33 2.32 0.862 Utr 2.0 13.000 12.352 to 150.0 0.0 2.000 0.0 H.8 2.32 0.0041 0.0 15.000 0.062 Vel = 1.28 H.8 0.0 0.862 Utr 2.0 5.000 12.414 to 150.0 0.0 2.000 0.0 T.34 2.32 0.0041 0.0 7.000 0.029 Vel = 1.28 0.0 2.32 12.443 K Factor = 0.66 T.48 3.69 0.862 Utr 2.0. 12.000 12.894 to 150.0 0.0 2.000 0.0 H.19 3.69 0.0099 0.0 14.000 0.138 Vel = 2.03 H.19 0.0 0.862 Utr 2.0 12.000 13.032 to 150.0 0.0 2.000 0.0 T.40 3.69 0.0098 0.0 14.000 0.137 Vel = 2.03 T.40 0.0 0.862 Utr 2.0 3.000 13.169 to 150.0 0.0 2.000 0.0 HA 1 3.69 0.0098 0.0 5.000 0.049 Vel = 2.03 HA 1 0.0 0.862 0.0 10.000 13.218 to 150.0 0.0 0.0 0.0 H.12 3.69 0.0098 0.0 10.000 0.098 Vel = 2.03 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 Final'Calculations - Hazen -Williams A-PEX Design Services, Inc.-EP Page 9 OLSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. It" or Ftng's Pe Pv ******* Notes ****** Point Qt Pf/Ft Eqv. Ln. Total Pf Pn H.12 0.0 0.862 Utr 2.0 7.000 13.316 to 150.0 0.0 2.000 0.0 T.39 3.69 0.0098 0.0 9.000 0.088 Vel = 2.03 0.0 3.69 13.404 K Factor = 1.01 T.38 3.26 0.862 Utr 2.0 10.000 17.992 to 150.0 0.0 2.000 0.0 H.9 3.26 0.0078 0.0 12.000 0.094 Vel = 139 H.9 0.0 0.862 Utr 2.0 12.000 18.086 to 150.0 0.0 2.000 0.0 H.14 3.26 0.0078 0.0 14.000 0.109 Vel = 1.79 H.14 0.0 0.862 Utb 17.0 10.000 18.195 to 150.0 0.0 14.000 0.0 T.43 3.26 0.0078 0.0 24.000 0.187 Vel = 1.79 T.43 -0.22 0.862 Utr 2.0 1.000 18.382 to 150.0 0.0 2.000 0.0 T.41 3.04 0.0070 0.0 3.000 0.021 Vel = 1.67 T.41 0.0 0.862 Utr . 2.0 12.000 18.403 to 150.0 0.0 2.000 0.0 H.5 3.04 0.0069 0.0 14.000 0.096 Vel = 1.67 H.5 0.0 0.862 Utr 2.0 26.000 18.499 to 150.0 0.0 2.000 0.0 H.2 3.04 0.0069 0.0 28.000 0.193 Vel = 1.67 H.2 0.0 0.862 Uel 11.0 17.000 18.692 to 150.0 Utr 2.0 14.000 0.0 H.3 3.04 0.0069 0.0 31.000 0.213 Vel = 1.67 H.3 0.0 0.862 Uel 11.0 17.000 18.905 to 150.0 0.0 12.000 0.0 H.10 3.04 0.0069 0.0 29.000 0.199 Vel = 1.67 H.10 0.0 0.862 Utb 17.0 5.000 19.104 to 150.0 0.0 14.000 0.0 T.35 3.04 0.0068 0.0 19.000 0.130 Vel = 1.67 0.0 3.04 19.234 K Factor = 0.69 T.43 0.22 , 0.862 Utr 2.0 2.000 18.382 to 150.0 0.0 2.000 0.0 H.20 0.22 0.0002 0.0 4.000 0.001 Vel = 0.12 H.20 0.0 0.862 Utr 2.0 16.000 18.383 to 150.0 0.0 2.000 0.0 H.24 0.22 0.0001 0.0 18.000 0.001 Vel = 0.12 H.24 0.0 0.862 Utr 2.0 6.000 18.384 to 150.0 0.0 2.000 0.0 T.50 0.22 0.0 0.0 8.000 0.0 Vel = 0.12 T.50 0.0 0.862 0.0 4.000 18.384 to 150.0 0.0 0.0 0.0 H.29 0.22 0.0 '0.0 4.000 0.0 Vel = 0.12 H.29 0.0 0.862 Utr 2.0 9.000 18.384 to 150.0 0.0 2.000 0.0 H.25 0.22 0.0001 0.0 11.000 0.001 Vel = 0.12 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087 , Final Calculations - Hazen -Williams A-PEX Design Services, Inc.-EP Page 10 ©LSON RESIDENCE - Two Head Calculation (H.30 & H.21) Date 10/12/2015 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "Cif or Ftng's Pe Pv ******* Notes ****** Point Qt Pf/Ft Eqv. Ln. Total Pf Pn H.25 0.0 0.862 Utb 17.0 12.000 18.385 to 150.0 Utr 2.0 16.000 0.0 T.42 0.22 0.0 0.0 28.000 0.001 Vel = 0.12 0.0 0.22 18.386 K Factor = 0.05 Computer Programs by Hydratec Inc. Route 111 Windham N.H. USA 03087