BLD20160355-Scott_ENG1.pdf
CITY OF EDMONDS
PLAN REVIEW COMMENTS
ENGINEERING DIVISION
(425) 771-0220
City Website: www.edmondswa.gov
DATE:April 5, 2016
TO:Tyler Scott
Scottt2@uw.edu
FROM:Jennifer Lambert
Engineering Technician
RE:Application #: BLD20160355
Project: Scott -Fence
th
Project Address: 21710 80Ave W
During review of the above noted application, it was found that the following information, corrections, or
clarifications are needed. Reviews by other divisions, such as Planning and Building, may result in
additional comments. Please redline plans or submit three (3) sets of revised plans/documents with a
written response to each of the items below to a permit coordinator.
nd
Resubmittals can be made at the Development Services Department on the 2floor of City Hall. Permit
Center hours are M, T, Th & F from 8am-4:30pm. The Permit Center is open from 8:30 to 12 on
Wednesdays.
City of Edmonds handouts, standard details and development code can be referenced on the City website.
Please Note:Building Handouts do not include updated Engineering Division Requirements. Refer to
Engineering Handouts for all Engineering Requirements.
1.
It appearsfrom the plans that the fence will create a site distance issue where vehicles are leaving
the parking area and driveway,north of the proposed fence.
a.
Please revise the site planto show thatthe site distance setback lines (see attached
handout) are being met. This may require portions of the fence to be no more than 3’ in
height or to angle the fenceto meet the site distance requirements.
11
Page of