Loading...
BLD20160700-Jensen_ENG1.pdf CITY OF EDMONDS PLAN REVIEW COMMENTS ENGINEERING DIVISION (425) 771-0220 City Website: www.edmondswa.gov DATE:June 21, 2016 TO:James Jensen JAMESKJENSEN5@GMAIL.COM FROM:Jennifer Lambert Engineering Technician RE:Application #: BLD20160700 Project: Jensen –Deck nd Project Address: 8211–182Pl SW During review of the above noted application, it was found that the following information, corrections, or clarifications are needed. Reviews by other divisions, such as Planning and Building, may result in additional comments. Please redline plans or submit three (3) sets of revised plans/documents with a written response to each of the items below to a permit coordinator. nd Resubmittals can be made at the Development Services Department on the 2floor of City Hall. Permit Center hours are M, T, Th & F from 8am-4:30pm. The Permit Center is closed on Wednesdays. City of Edmonds handouts, standard details and development code can be referenced on the City website. Please Note:Building Handouts do not include updated Engineering Division Requirements. Refer to Engineering Handouts for all Engineering Requirements. nd 1) Clearly show and label the streets (Andoverand 182Pl SW). 2) An easement is shown along the north property line. Please label this easement as private. 3) Show all impervious areas on the siteplan (i.e. walkways, driveways, patios, etc.). a)If the areas are to be removed, please show them on the plans and label to be removed. 4) Please label thedeck and the materialunder the deck asimperviousor pervious (i.e.spaced deck with permeable surface below).If there is an impervioussurface below the deck, please note what the materialis and if the material is existing. 5) Show the sewer line from the house to the sewer main. If thedeckis placed over the sewer, a show how access to the sewer and sewer cleanout will be maintained.Please note as such on the plans. 6) Show the water service line from the meter to the house. 11 Page of