CRA20020198 description update.pdf`110. 100
1215 th Avenue North, Edmonds WA 98020
Phone: 425.771.0220 • Fax: 425.771.0221 • Web: www.edmondswa.gov
DEVELOPMENT SERVICES DEPARTMENT • PLANNING DIVISION
Critical Areas ReconnaissanceReport. '
Critical Areas File Number
CRA20020198
Determination
Study Required
Site Location
8228 Talbot Road
Tax Account Number
59440000790202
Property Owner
James Ogonowski"
Applicant
Same
CriticalAreas' Present
" Q Geologically Hazardous Areas
R1 Erosion Hazard Areas
0 Landslide Hazard Areas
THIS PARCEL WAS PREVIOUSLY IDENTIFIED AS A `WAIVER' IN
2002. HOWEVER, THE CRITICAL AREAS CODE UPDATE OF
2005 REQUIRES REASSESSMENT OF THE ORIGINAL
DETERMINATION.
During review and inspection of the subject site, it was found that the site may contain (or be adjacent to) critical
areas, including Geologically Hazardous Areas (Erosion and/or Landslide Hazard Areas), pursuant to Chapters
23.40 and 23.80 of the Edmonds Community Development Code (ECDC). Geologically hazardous areas include
areas susceptible to erosion, land sliding, earthquake, or other geological events. They pose a threat to the health
and safety of citizens when incompatible development is sited in areas of significant hazard. Such incompatible
development may not only place itself at risk, but also may increase the hazard to surrounding development and
use. Cited sections of the Edmonds Community Development Code can be found on the City of Edmonds website
at www.edmondswa.gov.
The associated LiDAR map indicates that the subject parcel slopes generally east — west toward Talbot Road and
Puget Sound. Toward the eastern edge of the site, the slope is somewhat steeper than on the rest of the parcel
with slopes ranging from 40% to in excess of 50%. Soils on the property are identified Alderwood Urban land
complex (2% - 8% slope). As a result, the slopes in excess of 15% are classified as a potential erosion hazards and
the portion that exceeds 40% is a potential landslide hazard area.
Certain activities are allowed in or near critical area buffers as specified in ECDC 23.40.220. Similarly, certain
development proposals may be exempt from Critical Areas requirements (ECDC 23.40.230). if you have any
questions about whether your proposed development qualifies as an allowed or exempt activity, please contact
a Planner for more information.
Critical Areas Reports identify, classify and delineate any areas on or adjacent to the subject property that may
qualify as critical areas. They also assess these areas and identify any potential impacts resulting from your specific
development proposal. If a specific development proposal results in an alteration to a critical area the critical
areas report will also contain a mitigation plan. You have the option of completing the portion of the study that
classifies and delineates the critical areas and waiting until you have a specific development proposal to complete
the study. You may also choose submit the entire study with your specific development application. Please review
the minimum report requirements for all types of Critical Areas which are listed in ECDC 23.40.090.D. There are
additional report requirements for different types of critical areas (see below). Note that it is important for the
report to be prepared by a qualified professional as defined in the ordinance. There are options on how to
complete a critical areas study and an approved list of consultants that you may choose from. You may contact the
Planning Division for more information. General Mitigation Requirements for all Critical Areas are discussed in
ECDC 23.40.110 through 23.40.140.
Erosion Hazard areas include Alderwood and Everett series soils on slopes of 15 percent or greater, among others.
Landslide Hazard Areas are further defined in ECDC 23.80.020.A. In addition to the general requirements for
Critical Areas reports referenced above, specific Critical Area report requirements for Erosion Hazard Areas (which
are one of the Geologically Hazardous Areas) are provided in ECDC 23.80.050.
Note that Stable Erosion Hazard Areas may have limited report requirements at the director's discretion. At a
minimum an erosion and sediment control plan prepared in compliance with the requirements in ECDC Chapter
18.30 shall be required.
Development is restricted within an Erosion Hazard Area and must meet additional criteria. For erosion hazard
areas with suitable slope stability, an erosion and sediment control plan prepared in compliance ECDC 18.30 will be
considered to meet the Critical Areas "Study Required" determination. The determination of "suitable slope
stability" will be made by both the Planning and Engineering divisions of the City of Edmonds. In areas where the
slope stability is not suitable, projects within Erosion Hazard Areas will require a report by a licensed Geotechnical
Engineer or other qualified professional. Note that it is important for the report to be prepared by a qualified
professional as defined in the ordinance. Report requirements are given in ECDC 23.80.050, and more generally in
ECDC 23.40.090.D. Development standards are given in ECDC 23.80.060 and 23.80.070.
Page 12
Development is restricted within a Landslide Hazard Area and its buffer. Projects that will intrude into these areas
will require a report by a licensed Geotechnical Engineer. Geologically hazardous areas include areas susceptible
to erosion, land sliding, earthquake, or other geological events. They pose a threat to the health and safety of
citizens when incompatible development is sited in areas of significant hazard. Such incompatible development
may not only place itself at risk, but also may increase the hazard to surrounding development and use.
The criteria that are applied depend on the amount that the buffer is reduced. The buffer can be reduced to a
minimum of ten (10) feet (with an additional 15' building setback per ECDC 23.40.280) if a report is prepared that
meets the standards listed in ECDC 23.80.050). The alteration must also meet the requirements listed ECDC
23.80.060. In addition, proposals to reduce the buffer to less than ten (10) feet must comply with the design
standards listed in ECDC 23.80.070.A.3. Development is restricted within a Landslide Hazard Area and its buffer.
Projects that will intrude into these areas will require a report by a licensed Geotechnical Engineer.
This review applies to the entire subject parcel. Depending on the location and project proposed relative to the
identified critical areas, certain studies and reports may be required. Please contact the Planning Division at
425.771.0220 if and when you have a specific development proposal for this site in order to discuss the various
permits that will be required.
Mike Clugston, Associate Planner 4 iY/�
c. -
Name, Title
November 1, 2012
Signature " Date
Page 13