eng2007sp05102.8.30.07.pdf*************** -COMM. JOURNAL- ******************* DATE RUG -30-2007 ***** TIME 12:13 *** P.01
MODE = MEMORY TRANSMISSION STRRT=AUG-30 12:11 END=AUG-30 12:13
FILE NO.= 004
STN NO. COM ABBR NO. STATION NAME/TEL.NO. PAGES DURATION
001 OK a 97752634 005/005 00:01'37"
F E1041 Edmonds
City of E m
cy Development Services Department
Build ing-Engineeri ng-Planni ng
1215 th Avenue North •2"d Floor
Edmonds, WA 98020
11t Phone: 425.771.0220 Fax: 425.771.0221
COVER
wi: o'VAM++dA�..
Date Transmitted: '
Recipient's Il=ax No: No. of Pages:
tlnciuding cover p090:y
If there are any problems during transmission or documents are received incomplete, please
call 425. 771.0220 and ask for:
L:Temp/jsna/f6rme/05FAX
City of Edmonds
121 5TH AVENUE NORTH • EDMONDS, WA 98020 • (425) 771-0220 FAX (425) 771-0221
Website: www.ci.edmonds.wa.us
DEVELOPMENT SERVICES DEPARTMENT
Planning • Building • Engineering
Plan Review Comments
Plan Check
5-05-102 Date: August 30, 2007
Project Name/Address: R at Short Plat/9114 240"' ST SW
Contact Person/Address/Fax: :Tristar Home/Attn: Pat Crosby/ tristarhomeskattglobal.net /fax:425-775-2634~
Reviewer: Jaime Hawkins, Engineering Tech II Division: Engineering
The subject application has been reviewed but cannot be completed until the following items have been
addressed/corrected. Please resubmit 2 sets of revised drawings for review.
1. Please provide engineering with estimate for onsite and offsite improvements.
2. Please provide review fee of $860.00.
3. Please provide signed Special Inspection Agreement form. Form Provided.
4. Please provide three (3) copies of approved plans signed by Olympic View Water and Sewer District.
DATE FAXED/E-MAILED (Attach fax transmittal) PAGE + of
S:\ENGR\PRIVATE DEVELOMENT PROJECTS\REVIEW\LAND USEWBDIVISION & REQ'S\PLN200500102 Ryan sp revldoc
CITY OF EDMONDS
SPECIAL INSPECTION AND TESTING AGREEMENT
The project at issued under building permit
number requires special inspection and/or testing per IBC Chapter 17. The
complete list of special inspections is attached to this document.
BEFORE A PERMIT CAN BE ISSUED: The owner and contractor and special inspector shall complete
this agreement and the attached structural test(s) and inspections schedule including the required
acknowledgements.
APPROVAL OF SPECIAL INSPECTORS: Each special inspector shall be approved by the Building
Official prior to performing any duties or inspections. Each special inspector shall submit Statement of
Qualifications to the Building Official for review. Special inspectors shall display identification when
performing special inspections on site. Special inspection and testing shall meet the minimum requirements
of IBC Chapter 17 and the following:
A. Duties and Responsibilities of the Special Inspector
1. Observe Work
The special inspector shall observe the site work for conformance with the approved (stamped) plans
and specifications and applicable workmanship provisions of the IBC. Architect or Engineer
reviewed shop drawings may be used only as an aid to inspection. Special Inspections are to be
performed on a continuous basis—meaning that the special inspector is on site at all times observing
the work requiring special inspection. Periodic inspections, if any, must have prior approval by the
City based on a separate written plan reviewed and approved by the Building Official and the
engineer or architect of record.
2. Report Non -conforming Items
The special inspector shall bring non -conforming items to the immediate attention of the contractor
and note all such items in the daily field report. Any item not resolved in a timely manner shall be
immediate cause of the special inspector to notify the Building Official of the plan deviation, error,
change or omission. It shall also be the duty of the special inspector to promptly notify the engineer
or architect.
3. Complete Daily Reports
Each special inspector shall complete and sign both the special inspection record and the daily report
form for each day's inspection. These records shall remain at the jobsite with the contractor for
review by the City Building Inspector.
4. Furnish Weekly Reports
The special inspector or inspection agency shall furnish the City with weekly reports of tests and
inspections. The project engineer or architect, and others as designated shall also be copied on
reports. Weekly reports must include the following:
• Description of daily inspections and tests made with applicable locations
• List of all non -conforming items
• Report on status of non -conforming items (resolved or unresolved)
• Itemized changes authorized by the Architect, Engineer and City if not included in non-
conformance items.
5. Furnish Final Construction Report
The special inspector or inspection agency shall submit a final signed report to the City stating that
all items requiring special inspection and testing were fulfilled and reported. And, to the best of
L:\TEMP\BUILDING\SpecialInspectionAgreementIBC.doc 7/04
his/her knowledge the project is in conformance with the approved plans and specifications,
approved change orders and the applicable workmanship provisions of the IBC. Items not in
conformance or unresolved items or any discrepancies in inspection coverage, (i.e., missed
inspections, periodic inspection when continuous inspections were required, etc.) shall be specifically
itemized in this report.
B. Contractor Responsibilities
1. Notify the Special Inspector
It is the duty of the contractor to notify the special inspector when work is ready for special
inspection. Note, the items listed on the attached schedule and as noted on the approved plans and
specifications are required to have special inspections. Adequate notice shall be provided by the
contractor so that the special inspector has time to become familiar with the project.
2. Provide Access to Approved Plans
The contractor is responsible for providing the special inspector access to approved plans at the
jobsite.
3. Retain Special Inspection Records
The contractor is responsible to retain at the jobsite all special inspection records submitted by the
special inspector. These records are to be provided to the City building inspector upon request.
C. City of Edmonds Building Department Responsibilities
1. Approve special inspectors or inspection agencies
The building department shall approve all special inspectors and special inspection requirements.
2. Monitor special inspection and approve weekly reports
Work requiring special inspection and the performance of special inspectors shall be monitored by
the City Building Inspector. His/Her approval must be obtained prior to placement of concrete or
other similar activities in addition to that of the special inspector.
3. Issue Certificate of Occupancy
The Building Official may issue a Certificate of Occupancy after all weekly special inspection reports
including the final report have been submitted and accepted.
D. Owner Responsibilities
The project owner or the engineer or architect of record acting as the owner's agent shall fund
special inspection services.
E. Engineer or Architect of Record Responsibilities
The engineer or architect of record shall include special inspection requirements on the plans and
specifications.
ACKNOWLEDGEMENTS
I have read and agree to comply with the terms and conditions of this agreement.
Owner
Special Inspector
General Contractor
City Building Official
L:\TEMP\BUILDING\SpecialInspectionAgreementIBC.doc 7/04
Date
Date
Date
Date
SPECIAL INSPECTION AND TESTING SCHEDULE
PROJECT NAME
PROJECT ADDRESS
REINFORCED CONCRETE, GUNITE, GROUT AND MORTOR:
Concrete Gun'ite Grout Mortar
Aagregate Tests
Reinforcina Tests
......_.
Mix Designs
Reinforcina Placement
.-............ _.............
Batch Plant Inspection
Inspect Placinq
Cast Samples
.................. .......
Pick-up Samples
Compression Tests
PRECAST/PRESTRESSED CONCRETE:
..
Pipes Post -Tens Pre -Tens Claddh_
Aggreqate Tests
forcin Tests
_..........____ .......... e........-....
Tendon 'Tests
Mix Designs
Reinforcing Placement
Insert Placement
Concrete Batching
Concrete Placement
Instailatlon Inst kion
Cast Samples,
uIT Pick-uy Sam le
Campresslon Tests
MASONRY:
Special Inspection Stresses Used
Preliminary Acceptance Tests (Masonry Units, Wall Prisms)
Subsequent Tests (Mortar, Grout, Field Wall Prisms)
Placement Inspection of Units
FOUNDATION WORK:
................
Soil Bearing Verification
Subsurface Drainage Installation
..................
Foundation Drainage Installation
Temporary Erosion Control Installation
Additional Instructions on Other Tests and Inspections:
L:\TEMP\BUILDING\SpecialInspectionAgreementIBCl.doc 7/04
BUILDING PERMIT NO.
TESTING/INSPECTION AGENCY or SPECIAL INSPECTOR
STRUCTURAL STEEL/WELDING:
Sample and Test (list specific members below)
Shop Material Identification
Welding Inspection ❑ Shop ❑ Field
Ultrasonic Inspection ❑ Shop ❑ Field
_ High -Strength Bolting ❑ Shop ❑ Field
Inspection
❑ A325
El IN El El
❑ A490
Metal Deck Welding
.... Reinforcing Steel Welding Inspection
Metal Stud Welding Inspection
Concrete Insert Welding Inspection
FIREPROOFING:
Placement Inspection
Density Tests
Thickness Tests
Inspect Batching
INSULATING CONCRETE:
Sample and Test
Placement Inspection
Unit Weights
FILL MATERIAL:
_ Acceptance Tests
_ Placement Inspection
Field Density (Compaction)
Proof Rolling
Final Site Grading
STRUCTURAL WOOD:
_ Shear Wall Nailing Inspection
_ Inspection of Gludam Fab.
Inspection of Truss Joist Fab.
Sample and Test Components
MISC:
_ Final Geotechnical Report
Winterization Measures