Engineering Comments 1.pdfCITY OF EDMONDS
PLAN REVIEW COMMENTS
ENGINEERING DIVISION
(425)771-0220
City Website: www.edmondswa.gov
DATE: August 5, 2019
TO: Kristin Hanson hansondesign@hotmail.com
FROM: JoAnne Zulauf, Engineering Technician
JoAnne.zulauf@edmondswa.gov
RE: Application #: BLD20190849
Project: Azar - Addition
Project Address: 8202 Talbot
During review of the above noted application, it was found that the following information,
corrections, or clarifications are needed. Please submit revised plans/documents including a written
response to each item below.
Resubmittals can be made at the Development Services Department on the 2nd floor of City Hall.
Permit Center hours are M, T, Th & F from 8am-4:30pm and on Wednesdays from 8:30am-noon.
TESC
1) Incorporate and reference City standard details. Straw is not a barrier bmp. Straw wattles
are an option for a barrier bmp.
2) Add note: All disturbed areas to be compost amended per 2014 SWMMWW BMP T.5.13.
3) Add note: Install and maintain all TESC measures as required. City of Edmonds standard
details, and all other measures that may be required during construction.
STORM
1) Please provide the impervious surface calculations per example table below.
Type of area
Square footage
Year Constructed -For
Existing
Existing Roofline
Existing Driveway
Existing Etc...
Proposed Add Roofline
Proposed Patio
Proposed Etc...
2) Will there be new footing drains? Show where the footing drains will discharge.
3) Where will new roof drains discharge to? Splash block? Connect to existing drainage system?
Note on plans.