Engineering Comments 1-BLD20190803.pdfOF EDV0 CITY OF EDMONDS
PLAN REVIEW COMMENTS
ENGINEERING DIVISION
6'st 1g90 (425) 771-0220
City Website: www.edmondswa.gov
DATE: August 1, 2019
TO: Paul Trieu
Paul-oaklive.com
FROM: Jeanie McConnell, Engineering Program Manager
Jeanie.mcconnell@edmondswa.gov
RE: Application #: BLD20190803
Project: Trieu — Remodel Workshop & Add Driveway Area
Project Address: 7011 Lake Ballinger Way
During review of the above noted application, it was found that the following information,
corrections, or clarifications are needed. Please submit revised plans/documents including a written
response to each item below.
Resubmittals can be made at the Development Services Department on the 2nd floor of City Hall.
Permit Center hours are M, T, Th & F from 8am-4:30pm and on Wednesdays from 8:30am-noon.
City of Edmonds handouts and development code may be referenced on the City website:
www.edmondswa.gov under Services/Permits and Development.
1) Please revise the site plan to clearly show the following with regards to the driveway:
a. Show the entire existing driveway. Include all areas adjacent to the home and up to the
point at which the driveway approaches connect to Lake Ballinger Way.
b. Show the edge of pavement on Lake Ballinger Way.
c. Identify existing driveway surface material (asphalt, concrete, crushed rock, etc.).
d. From various records, it appears as though there is not an existing hard surface
connection between the driveway and the area adjacent to the existing workshop
building. Please provide clarification as to what the existing surface material is.
2) The plans indicate construction of a new 1909sf driveway. As you are probably aware, City
code requires stormwater management when 2000sf or more hard surface area is constructed on
a site. In addressing the above comments, should it be determined that this threshold is met,
stormwater management will be required. Please refer to the City's stormwater code,
appendices, and standard details as applicable.
3) If stormwater management is triggered, please include the following hard surface area chart,
providing a breakdown for all the impervious surfaces. (Project Site Category: Discharge
location: (City's MS4 (municipal separate storm sewer system), BNSF Property, Puget Sound
through the Cit 's MS4)
Type of area
Square footage
Stormwater Facility
Lawn and Landscape
Roofs
Hard surfaces
25% Retrofit
4) Provide a temporary erosion and sedimentation control plan and reference City standard details
where applicable.
5) Add note: All disturbed areas to be compost amended per 2014 SWMMWW BMP T.5.13.
6) Show location of public sanitary sewer main and associated easement on the property.
Structures, such as retaining walls, will not be allowed to encroach within the easement area
and/or over the top of the sewer main.
7) Consistent with Edmonds Community Development Code 18.80.060, driveway slopes shall not
exceed 14% slope. Please confirm that any new driveway areas will not exceed this slope.
8) Please note: additional comments not included in this review may be produced after reviewing
the next submittal.
Page 2 of 2