Engineering Comments 2.pdfCITY OF EDMONDS
PLAN REVIEW COMMENTS
ENGINEERING DIVISION
(425) 771-0220
City Website: www.edmondswa.gov
DATE: September 3, 2019/September 20,2019
FROM: JoAnne Zulauf
Engineering Technician
RE: Application #: bld20191074
Project: Swedish Plumbing
Project Address: 21601 76tb Ave W
During review of the above noted application, it was found that the following information, corrections, or
clarifications are needed. Reviews by other divisions, such as Planning and Building, may result in
additional comments. Please submit two (2) sets of revised plans/documents with a written response to
each of the items below to a permit coordinator.
Resubmittals can be made at the Development Services Department on the 2nd floor of City Hall. Permit
Center hours are M, T, Th & F from 8am-4:30pm and on Wednesdays from 8:30am-12pm.
City of Edmonds handouts, standard details and development code can be referenced on the City website.
Utility Engineer Comments:
9/3/19 Comments Addressed.
9/20/19 Comments on revised plan:
1. Plans are not stamped and signed by an engineer.
2. All pipe needs to be CL 52. Called out as CL 50.
Need callouts for required vertical bends (degree of bend, vertical blocking needed, etc) that are
required for the fittings under the RPBA pad.
4. Add note to plans: "PreConstruction meeting between City's Utility Engineer, Contractor and
their consultant to determine coordination of RPBA pad in relation to City's Meter Vault is
required."
W20191074-swedish plumbing-2.docx
1
Page 1 of