epoxy adhesive specification.pdfPage 1 of 2
Miller, Chuck
From: pkdphil@comcast.net
Sent: Tuesday, May 08, 2012 3:37 PM
To: Miller, Chuck
Subject: Re: BLD2012-0232 Karnofski-Autry remodel -addition
chuck, i have an older book so we want to go with the set xp 22. thanks phil
From: "Chuck Miller" <Chuck.Miller@edmondswa.gov>
To: pkdphil@comcast.net
Sent: Tuesday, May 8, 2012 2:39:08 PM
Subject: RE: BLD2O12-0232 Karnofski-Autry remodel -addition
Phil,
Do you mean 'SET -XP 22', or just 'SET22' ?
See attached link.
htti)://www.strongtie.com/products/anchorsystems/information/cracked concrete solutions.html
Let me know.
Charles Miller
City of Edmonds
Plans Examiner
chuck.miller@edmondswa.gov
425-771-0220 x 1314
-----Original Message -----
From: pkdphil@comcast.net [mailto:pkdphil@comcast.net]
Sent: Tuesday, May 08, 2012 2:22 PM
To: Miller, Chuck
Subject: Re: BLD2012-0232 Karnofski-Autry remodel -addition
chuck, since we are using simpson hd. we will also be using simpson "set" high
strength epoxy set22 . thanks phil king.
From: "Chuck Miller" <Chuck.Miller@edmondswa.gov>
To: pkdphil@comcast.net
Sent: Tuesday, May 8, 2012 10:45:26 AM
Subject: BLD2O12-0232 Karnofski-Autry remodel -addition
Good morning,
Thank you for your response to the review notes dated 4-23-2012.
While going through them a question came up about the 'epoxy grout' to be used for the anchorage
of the 'HDSA' holddowns. There appears to be no 'typical' product due to the loads unique to each
installation. While the embedment depth was provided, the specific product required for the
tension load needs to be provided. The product needs to meet the ICC -ES AC308 testing criteria
Page 2 of 2
for post -installed adhesive anchorage in concrete.
Once the specific product is provided, I will add that information to the plans and attach the e-mail to the
permit file.
Charles Miller
City of Edmonds
Plans Examiner
chuck.miller@edmondswa.gov
425-771-0220 x 1314
SiRi?nl