Lighting_Summary_Form.xlsmElectronic Version - Washington Nonresidential Energy Code Forms
1/1/2017
1/1/2017
1/1/2017
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0.5
20
0.66
20
0.34
20
0.91
20
0.22
20
1.94
20
1.22
20
0.34
20
0.34
20
0.81
20
0
20
1
20
1.07
20
0.98
20
0.57999999999999996
20
0.74
20
0.63
20
0.33
20
0.53
20
1.38
20
1.37
20
0.77
20
1.52
20
0.86
20
0.71
20
0.52
20
0.76
20
0.45
20
0.79
20
0.38
20
1.02
20
1.45
20
0.48
20
0.38
20
1.44
20
0.51
20
0.85
20
0.42
20
1.6
20
0.72
20
0.6
20
0.74
20
0.57999999999999996
20
0.89
9
0.78
9
0.15
20
0.91
20
0.97
20
0.78
20
1.27
20
0.43
20
0
20
0.55000000000000004
20
0.5
20
0.54
20
1.27
20
0
20
1.1599999999999999
20
0.3
20
1.77
20
1.93
20
0.45
20
0.18
20
0.57999999999999996
20
0.96
20
1.33
20
1.06
20
0.59
20
0.7
20
0.56999999999999995
20
1.51
20
0.5
20
0.73
20
0.92
20
0.74
9
1.37
9
1.03
20
0.59
20
0.84
20
0.98
20
0.95
20
0.84
20
0.82
20
0.32
20
0.75
20
0.51
20
1.22
20
0.56999999999999995
20
0.88
20
2.41
20
1.54
20
0.96
20
0.57999999999999996
20
0.42
20
0.28999999999999998
20
0.64
20
0.46
20
0.76
20
1/1/2017
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1/1/2017
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.6
0.6
1.4
2.5
1/1/2017
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
4
0
0
0
0.64
0.81
0.81
0.79
0.72
0.71
0.46
0.67
0.54
0.75
0.7
0.84
0.7
0.94
0.89
0.61
0.41
0.8
0.66
0.16
0.65
1
0.7
0.7
0.8
1.01
0.7
0.62
0.71
0.56000000000000005
0.4
0.95
2
0
5
3
3
0
0
4
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
1
0
0.64
0
0
0
0
0
0
1
0
0.81
0
0
0
0
0
0
1
0
0.81
0
0
0
0
0
0
1
0
0.79
0
0
0
0
0
0
1
0
0.72
0
0
0
0
0
0
1
0
0.71
0
0
0
0
0
0
1
0
0.46
0
0
0
0
0
0
1
0
0.67
0
0
0
0
0
0
1
0
0.54
0
0
0
0
0
0
1
0
0.75
0
0
0
0
0
0
1
0
0.7
0
0
0
0
0
0
1
0
0.84
0
0
0
0
0
0
1
0
0.7
0
0
0
0
0
0
1
0
0.94
0
0
0
0
0
0
1
0
0.89
0
0
0
0
0
0
1
0
0.61
0
0
0
0
0
0
1
0
0.41
0
0
0
0
0
0
1
0
0.8
0
0
0
0
0
0
1
0
0.66
0
0
0
0
0
0
1
0
0.16
0
0
0
0
0
0
1
0
0.65
0
0
0
0
0
0
1
0
1
0
0
0
0
0
0
1
0
0.7
0
0
0
0
0
0
1
0
0.7
0
0
0
0
0
0
1
0
0.8
0
0
0
0
0
0
1
0
1.01
0
0
0
0
0
0
1
0
0.7
0
0
0
0
0
0
1
0
0.62
0
0
0
0
0
0
1
0
0.71
0
0
0
0
0
0
1
0
0.56000000000000005
0
0
0
0
0
0
1
0
0.4
0.95
0
0
1/1/2017
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
1
0
0
0
0
0
0
0
0
5
5
0
11
12
500
600
750
1300
0
0
0
0
0
0.04
0.06
0.08
0.1
0
0
0
0
0
0.7
0.7
0.8
1
0
0
0
0
0
0.14000000000000001
0.14000000000000001
0.16
0.2
0
0
0
0
0
0.75
1
1
1
0
0
0
0
0
0.15
0.15
0.2
0.3
0
0
0
0
0
20
20
30
30
0
0
0
0
0
20
20
20
20
0
0
0
0
0
0.25
0.25
0.4
0.4
0
0
0
0
0
0.6
0.6
0.8
1
0
0
0
0
0
0.25
0.25
0.5
0.7
0
0
0
0
0
0
10
10
30
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
500
600
750
1300
0
0
0
0
0
0
0
0
0
0
7.4999999999999997E-2
0.113
0.15
0
0
0
0
0
0
0
0
0
270
270
270
270
0
0
0
0
0
0
0
0
0
0.75
0.75
0.75
0.75
0
0
0
0
0
0
0
0
0
0.5
0.5
0.5
0.5
0
0
0
0
0
0
0
0
0
400
400
400
400
0
0
0
0
0
0
0
0
0
800
800
800
800
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1/1/2017
1/1/2017
1/1/2017
1/1/2017
1/1/2017
Start-up
Getting Around
Project Info
Date
For Building Department Use
Applicant Name:
Applicant Phone:
Project Description
Number of
Fixtures
Watts
Proposed
Total Proposed Watts
Allowed Watts
per ft
2
or per lf
0.2 W/ft
2
LTG-CHK
Component
0.15 W/ft
2
LTG-EXT
Uncovered Parking and drives
0.5 W/ft
2
Gate House
Loading Areas - Law & EMS
800W per Entry
0.5 W/ft2
1.0 W/LF
Grounds Walkways <10 wide
Grounds Walkways >10' wide
Area (ft
2
), perimeter (lf) or # of items
allowed
proposed
text
fail msg
Tradable Locations
Building Grounds
W/unit
Stairways
1.0 W/ft
2
Site Allowance
500 W
Sales Canopies
Pedestrian Tunnel
Drive up Windows & Doors
Exterior Lighting Allowance Lookup Tables
Zone 1
Zone 2
Zone 3
Zone 4
600 W
1300 W
0.04 W/ft
2
0.06 W/ft
2
0.10 W/ft
2
0.7 W/LF
0.8 W/LF
0.14 W/ft
2
0.16 W/ft
2
0.20 W/ft
2
0.75 W/ft
2
0.3 W/ft
2
0.6 W/ft
2
0.8 W/ft
2
0.25 W/ft
2
0.7 W/ft
2
No Allowance
0.75 W/ft2
Selected Lighting Zone
Column Index
Text
Number
No Grace
Grace
logic
if no grace and grace =0 then flying colors
if NOT(no grace and grace =0) then fail all items
if not no grace but grace=0 then xxxxx
Non-Tradable
No Zone Selected
Select Zone
Façade Warning
Fail Msg
Fail Flag
w/ Site Allowance
With Site Allowance
No Site Allowance
warning
Total Proposed Tradable Watts:
Excess Watts
Gross Interior
Area in ft
2
Base Site Allowance
Base Site Allowance:
Intro
Tradable Surfaces
Total
Total in Categories
Error
Error Msg
750 W
Entry Canopies
0.4 W/ft
2
Building Areas
Automotive facility
Convention center
Court house
Dining: Bar lounge/leisure
Dining: Cafeteria/fast food
Dining: Family
Dormitory
Exercise center
Fire station
Gymnasium
Health care clinic
Hospital
Library
Manufacturing facility
Motion picture theater
Multifamily
Museum
Office
Parking garage
Penitentiary
Performing arts theater
Police station
Post office
Religious building
Retail
School/university
Sports arena
Town hall
Transportation
Warehouse
Workshop
Allowance
W
Fail
Area
No lights
low LPD
LTG-INT-BLD
LTG-INT-SPACE
Method
Watts
Area Description
Pass
Low LPD
Specified Building Areas
watts error
lowLPD error
Means of egress lighting
Hotel/motel guest rooms
Supplemental task lighting
C405.2.4
Exterior lighting controls
C405.5.2
Building Area Method
Exit signs
Exterior building grounds lighting
Allowed Watts
Watts Allowed
(watts/ft
2
x area)
Space-by-Space areas
Classroom/lecture/training
Conference/meeting/multipurpose
Corridor/transition
Dressing/fitting room performing arts theater
Electrical/mechanical
Food preparation
Laboratory for classrooms
Laboratory for medical/industrial/research
Lobby
Lobby for performing arts theater
Lobby for motion picture theater
Locker room
Lounge recreation
Office - Enclosed
Office - Open plan
Restroom
Sales area
Stairway
Storage
Audience/seating area: auditorium
Audience/seating area: performing arts theater
Audience/seating area: motion picture theater
Dining area: Bar/lounge/leisure dining
Dining area: Family dining area
Automotive ‑ Service/repair
Bank/office ‑ Banking activity area
Dormitory living quarters
Parking garage ‑ Garage areas
Warehouse: Fine material storage
Warehouse: Medium/bulky material
Transportation: Air/train/bus baggage area
Transportation: Airport concourse
Transportation: Audience seating
Transportation: Terminal ‑ Ticket counter
Sports arena: Audience seating
Sports arena: Court sports area ‑ Class 4
Sports arena: Court sports area ‑ Class 3
Sports arena: Court sports area ‑ Class 2
Sports arena: Court sports area ‑ Class 1
Retail: Dressing/fitting area
Retail: Mall concourse
Religious building: Audience seating
Religious building: Fellowship hall
Religious building: Worship pulpit/choir
Post office: Sorting area
Museum: General exhibition
Museum: Restoration
Convention center: Exhibit space
Convention center: Audience/seating area
Fire stations: Engine rooms
Fire stations: Sleeping quarters
Gymnasium/fitness center: Fitness area
Gymnasium/fitness center: Gymnasium audience/seating
Gymnasium/fitness center: Playing area
Health care clinic/hospital: Corridors/transition
Health care clinic/hospital: Emergency
Health care clinic/hospital: Exam/treatment
Health care clinic/hospital: Medical supplies
Health care clinic/hospital: Nursery
Health care clinic/hospital: Nurse station
Health care clinic/hospital: Operating room
Health care clinic/hospital: Patient room
Health care clinic/hospital: Pharmacy
Health care clinic/hospital: Physical therapy
Health care clinic/hospital: Radiology/imaging
Health care clinic/hospital: Recovery
Hotel: Dining area
Hotel: Guest rooms
Hotel: Hotel lobby
Hotel: Highway lodging guest rooms
Library: Card file and cataloguing
Library: Reading area
Library: Stacks
Manufacturing: Corridors/transition
Manufacturing: Detailed manufacturing
Manufacturing: Equipment room
LTG-INT-DISPLAY
retail sales Zones
Count
None
Allowed
Watts per ft
2
When a form has a space for notes or explanation, click anywhere in the space to edit. </t>
Check boxes can be checked or unchecked by clicking in the box with your mouse. Radio buttons (circles) allow only one in a set to be selected.</t>
http:/www.neec.net/energy-codes
sum of allowed and proposed watts in non-tradable categories
Interior Lighting Power Allowance
Over
watts in allowed catagories
watts entered
1=Error : watts entered in undefined category
NA
No
Yes
10 W/LF frontage
30 W/LF frontage
Warnings
Building Area
Undefined Surface Warning
Number of Unique Areas
If "no" is selected for any question, provide explanation:
Energy Code
Training
Overview
Most calculations are automated. Cells that display informational text and the results of calculations are write-protected and cannot be edited. </t>
Save Files
Input Cells
Avoid excessively long text strings when entering information. In some cases, text that extends beyond the available space will not be visible. In most cases the text will wrap within
the cell. This may force part of the form onto a new page.</t>
Drop-down lists have an arrow at the right side of the cell. Click on the arrow with your mouse and select the appropriate option. Use the delete button on your computer to clear a
drop-down entry.</t>
Personalizing
You can personalize the forms with your company name, address, phone, or any other information. This is done by editing the header or footer in Excel.</t>
Printing
If you are losing form details when printing, you may have a shortage of printer memory. Try printing problem pages individually.</t>
By default, only the active worksheet is printed. To print more than one worksheet at a time, open your print set-up menu and select either the page range you wish to print or Entire
Workbook.</t>
Forms (worksheets) in a workbook may not be deleted because the file is locked.</t>
Blank Forms
End of Instructions for Electronic Forms
Retail 1
Retail 2
Retail 3
Retail 4
270W+90W/add.
unlit area
kind of error
undeclared area
ERROR if >0
If we set up area checking for tradable lighting
All general project information and the date are entered once on LTG-SUM. This information is automatically replicated on all other LTG forms. The LTG-SUM form accompanies all other
LTG forms except LTG-EXT, which is a stand alone form.</t>
Exterior LTG Zone
Assign a Building Area using the drop menu for each lighting fixture type defined in the Proposed Lighting Wattage table. The worksheet will total all fixtures assigned to each Building
Area.</t>
For projects complying via the Space-By-Space Method, provide total gross interior area for each Space Type in the Maximum Allowed Lighting Wattage table using the drop down menu.</t>
Assign a Surface using the drop menu for each exterior lighting fixture type defined in the Tradable and Non-Tradable Proposed Lighting Wattage tables. </t>
Interior LTG Building Area Method
Interior LTG Space-By-Space Method
Interior LTG Retail Display
Exterior LTG
Display and accent lighting
Lighting for non-visual applications
Lighting equipment for sale or demonstration
Exterior building grounds lighting controls
Total connected interior lighting power
Total connected exterior lighting power
Exterior lighting zone
Indicate building exterior lighting zone as defined by the AHJ
Exterior lighting power calculations
Court/police station/penitentiary: Courtroom
Court/police station/penitentiary: Confinement cells
Court/police station/penitentiary: Judge chambers
Court/police/penitentiary: Penitentiary audience seating
Court/police/penitentiary: Penitentiary classroom
Court/police/penitentiary: Penitentiary dining
Retail 2: Vehicles, sporting goods and small electronics
Retail 3: Furniture, clothing, cosmetics, artwork
Retail 4: Jewelry, crystal, china
Non-Tradable Surface
Tradable Surface
Other Entry Door
Main Entry Door
Manufacturing: Extra high bay (> 50 ft floor-ceiling ht.)
Manufacturing: High bay (25 ‑ 50 ft floor-ceiling ht.)
Manufacturing: Low bay (< 25 ft floor-ceiling ht.)
Compliance information required in permit documents
C405.8
Indicate that exempt lighting equipment is in addition to general area lighting and is controlled independently
Space-By-Space Method
old formula =IF(N46=1,"Error: Non-tradable allowed and proposed surfaces do not match.","")
new has " " so that complies does not show
Total Allowed Watts
Applicability (yes,no,na)
Code Section
Location in Documents
Building Department Notes
Complete required compliance form – proposed wattage for exterior lighting plus base site allowed does not exceed maximum allowed
End of Lighting, Motor & Transformer Permit Documents Checklist
Retail 1: All unclassified retail display
Many tables, such as for listing proposed lighting fixture types, have a certain number of lines available for entering data. You may need more lines to enter all your information.
Where this feature is available, you can add additional lines to the table by selecting the "+" button on the right hand side of the table with your mouse. </t>
Adding And Deleting Lines
To remove lines that you have added, select the "-" button with your mouse. This will delete the last line of the section. You cannot remove lines that were not added; an error message
will appear if you try.</t>
If you add additional lines with this method, the pagination may be affected forcing the forms to carry additional lines over to other pages. Be sure to submit all pages to the plans
examiner.</t>
For projects complying via the Building Area Method, provide the total gross interior area for each Building Area Type in the Maximum Allowed Lighting Wattage table using the drop down
menu. </t>
Provide square-foot surface area, perimeter linear feet, or number of items for each Surface Type in the Tradable and Non-Tradable Maximum Allowed Lighting Wattage tables using the
drop down menus. </t>
The forms should print on any printer supported by your operating system. You will need to have the following TrueType fonts installed under Windows: Arial, Times New Roman, Courier
New and Wingdings. These are all standard Windows fonts.</t>
For each radio button group there is a button labeled "Clear." Clicking this button will clear the other buttons so that they will print as empty circles. The "Clear" button will not
print.</t>
This file is an Excel workbook that contains multiple compliance forms and resources in Excel worksheets. Each worksheet is indicated by a tab at the bottom of the screen. You may visit
each worksheet by selecting it's tab. </t>
Only input cells are accessible. If you try to edit a write-protected cell an error message will appear requesting a password. A password IS NOT required to complete these forms. You
may use the TAB key to move to the next input cell. If the TAB doesn't take you where you want to go, use your mouse to move around the form. </t>
To enter the date, use this format: mm/dd/yyyy. For example, you would enter 7/1/2013 or 12/21/2014.</t>
This file is saved in the same manner as any standard Excel file.
if non-tradable light entered without cateory throw error. If okay then:
Sum all entered watts. If diff from category totals then watts entered in undefined category.
Formula below needs a blank as first cell of function
Undefined
Location (plan #,
room #)
Location (plan #,
room #, or ALL)
This form is a compliance aid and is not a substitute for the full energy code text or specific jurisdiction compliance requirements. Users should refer to the code text and contact
the local jurisdiction for complete information. The full 2015 WSEC code text is available for download from the NEEC website:</t
Refer to the NEEC website for instruction on how to complete all of the 2015 WSEC Compliance Forms.
maxlpd
ceilinghgt
Atrium
Banking activity area
Breakroom (see Lounge/breakroom)
Classroom/lecture/training: penitentiary
Copy/print room
Corridor: facility for the visually impaired
Corridor: hospital
Corridor: manufacturing
Corridor: all other
Courtroom
2012 categories not used in 2015
Computer room
Dining area: all other
Dining area: penitentiary
Dining area: facility for the visually impaired
Emergency vehicle garage
now just single Guest rooms
Guest room
now Dining: All other
Laundry/washing area
Lobby: all other
Lobby: performing arts theater
Lobby: facility for the visually impaired
Lobby: elevator
Lobby: hotel
Lobby: motion picture theater
Lounge/breakroom: all other
Lounge/breakroom: health care facility
Office: Enclosed
Office: Open plan
Parking area, interior
Pharmacy area
Restroom: facility for the visually impaired
Restroom: all other
Seating area, general
Audience/seating area (permanent): auditorium
Audience/seating area (permanent): convention center
Audience/seating area (permanent): gymnasium
Audience/seating area (permanent): motion picture theater
Audience/seating area (permanent): penitentiary
Audience/seating area (permanent): performing arts theater
Audience/seating area (permanent): religious building
Audience/seating area (permanent): sports arena
Audience/seating area (permanent): other
Stairway (see space containing stairway)
Stairwell
Vehicular maintenance
Automotive - See Vehicular maintenance)
Gymnasium/fitness center: Exercise area
now done like other spaces with exam room, nurses station and such
Health care facility: Exam/treatment
Health care facility: Imaging room
Health care facility: Medical supplies
Health care facility: Nursery
Health care facility: Nurse station
Facility for the visually impaired: Recreation room
Facility for the visually impaired: Chapel
Health care facility: Operating room
Health care facility: Patient room
Health care facility: Physical therapy
Health care facility: Recovery
now either audience/seating (permanent): all other or Seating area, general
not sure
Performing arts theater: Dressing/fitting room
Transportation: Baggage/carousel area
Warehouse: Medium/bulky palletized items
Warehouse: Smaller, hand carried items
2015 Space-by-Space areas
2012 Space-by-Space areas
0.08 W/ft
2
WSEC 2015 if proposed lighting enter - check compliance else be blank
Text denoting areas not defined (used here and on LTG-INT-BLD
C405.2.2
C405.2.4.2
C405.2.4.3
C405.2.5
C405.2.6
Digital timer switch
C405.2.7
C405.3
C405.4.2.1
C405.4.2.2
C405.5.1
C405.5.1
Table C405.5.2(1)
C405.6
C405.7
Electric motor efficiency
C405.10
Controlled receptacles
C405.9.1
C405.9.2
Elevator cabs
C405.9.3
Regenerative drive
Escalators and moving walks
C405.1
Fail C406.4
2015 Washington State Energy Code Compliance Forms for Commercial Buildings including R2, R3, R4 over 3 stories and all R1
C405.2.1
C405.2.1.1
C405.2.1.2
Occupancy sensor controls
Occupancy sensor controls - warehouses
Indicate aisleways and open areas in warehouse spaces provided with occupancy sensor controls that reduce lighting power by 50%
Method of automatic shut-off control
C405.2
Lighting controls, general
Luminaire level lighting controls (LLLC)
Lighting in dwelling units
Indicate on plans all fixtures provided with LLLC in lieu of C405.2 lighting controls; provide description of control capabilities and performance parameters
C405.2.2.1
C405.2.2.2
C405.2.3
C405.2.2.1
Indicate on plans which method of manual 50% lighting load reduction is provided, or whether lighting load is reduced via occupancy sensors or daylight responsive controls
Total Area
Total Watts
Project Title:
20W/LF door
30W/LF door
400W/driveup
Project Title:
Company Name:
Company Address:
Applicant Email:
Loading dock, interior
Storage room
Lighting Summary
Interior Lighting Power Allowance Method
LPA Calculation Type
Dwelling Unit Interior Lighting
Dwelling Method
Interior Lighting Controls
Exterior Lighting System Description
Calculation Type
C406.4 Reduced Lighting Power=2
Change of Space Use
Building Additions
Compliance Method
Interior lighting
Exterior lighting
Interior and Exterior
Lighting Power
Lighting Alterations
Lighting Controls
Interior Lighting - Space-By-Space Method
Interior Display Lighting - Space-by-Space
Interior Lighting - Building Area Method
ExtAlt_LT50pct
Exterior Lighting Zone
Calculation Scope (area calculation is for)
Not used in calculations 6/2016
Calculation Area
Non-Tradable Surfaces
Calculation Scope
Open Area Sales
Vehicle Sales Street Frontage
24 Hour Retail Entrance Parking
Not USED
Existing Undefined Area
Lists with space an end so user can select blank if they can't figure out to use delete key
List for < 50% cas
Validation Range to Use
Tradable
NonTradable
Exterior Lighting
Retail Display Lighting Base Allowance
Area Used
Installed Watts
Lighting Summary, cont.
1 - This title will copy onto other forms
Site Remaining After Tradable
Site Available for NonTradeable
Error Msg for LTG-EXT!A51
NOT USED - WAS =IF(N45>N44+0.01,"PROPOSED WATTS IN UNDEFINED AREA","")
Hotel
Totals
Revised July 2016
Automatic time switch controls
Identify spaces and lighting fixtures on plans that require specific application lighting controls per this section
Indicate manual and automatic lighting control method
Indicate method of automatic control - vacancy or captive key control of all installed luminaires and switched receptacles in guest room
Identify on plans egress fixtures that function as both normal and emergency means of egress illumination;
Provide calculation of lighting power density of total egress lighting;
If total egress lighting power density is greater than 0.02 W/sq. ft., indicate on plans egress fixtures requiring automatic shut-off during unoccupied periods;
Indicate method of automatic shut-off control
INTERIOR LIGHTING POWER & EFFICACY
Indicate locations where automatic shutoff is provided by other methods (occupancy sensor or digital timer switch) or which time switch control exception applies
Indicate on exterior lighting plans and fixture schedules the automatic lighting control method, control sequence, and locations served;
For building grounds fixtures greater than 100 watts, indicate on plans whether fixtures have efficacy greater than 80 lumens or; are controlled by motion sensor, or are exempt lighting
per C405.5.2
Indicate location(s) of master control switch(es) intended to control multiple independent switches; circuit breaker may not be used as a master control switch;
Verify that no 20 amp circuit controlled by a single switch or automatic control is loaded beyond 80%
Area controls - Master control switches and circuit power limit
Dwelling unit electrical energy consumption
Indicate rated watts per cfm for elevator cab ventilation fans do not exceed 0.33 watts per cfm;
Indicate on plans the spaces served by occupancy sensors;
Daylight zones - Sidelight and toplight
Indicate primary and secondary sidelight daylight zone areas on plans, include sq. ft.;
Daylight responsive controls
Indicate on plans lighting zone(s) served by daylight responsive controls;
Indicate that daylight sensing controls are configured to completely shut off all controlled lights in the lighting zone
Indicate on plans that display and accent lighting, and display case lighting are controlled independently from both general area lighting and other lighting applications within the
same space;
Indicate on plans eligible non-visual lighting applications, include sq. ft. area of each lighting control zone;
Indicate on plans that lighting equipment for sale or demonstration are controlled independently from both general area lighting and other lighting applications within the same space;
Include all luminaires in lighting fixture schedule; indicate fixture types, lamps, ballasts, and manufacturer's rated watts per fixture;
Identify spaces eligible for lighting power exemption on plans and in compliance forms; indicate the exception applied;
Identify lighting equipment eligible for lighting power exemption in fixture schedule and in compliance forms; indicate the exception applied;
For building grounds fixtures rated at greater than 100 watts that are complying based on efficacy, indicate rated lamp efficacy (in lumens per watt) in fixture schedule
Include electrical transformer schedule on electrical plans; indicate transformer size, efficiency, or exception taken
Indicate on electrical plans that each dwelling unit in Group R-2 has a separate electrical energy meter
Include all motors, including fractional hp motors, in electric motor schedule on electrical plans; indicate hp, rpm, rated efficiency, or exception applied
For luminaires in each elevator cab, provide calculated average efficacy of combined fixtures that indicates efficacy is not less than 35 lumens per watt;
Indicate escalators comply with ASME A17.1/CSA B44; automatic controls are configured to reduce operational speed to the minimum permitted when not in use
Indicate all one-way down or reversible escalators are provided with a variable frequency regenerative drive
Site Allowance Remaining:
Site Allowance Balance
Not Defined
Total Allowed Tradable + Site Allowance Watts:
was: =IF(ExtAlt_LT50pct,"ALTERATION ALLOWANCE","SITE ALLOWANCE")
intCalcScopeSet
CalcTypeSet
Lobby Description including (plan # & room #)
lobby
Allowance
min (max, display)
Tradable Maximum Allowed Lighting Wattage
NOTE 1
Non-Tradable Maximum Allowed Lighting Wattage
NOTE 1
Retail Sales Area Type
NOTE 1
Surface Description
Watts per
Fixture
NOTE 6
Allowed Watts
per ft
2
NOTE 2
Space Type
Watts/
Fixture
NOTE 7
Ceiling
Height
NOTE 2
Total Retail With Display Area
Non-Tradable Watts Exceeding LPA:
Fixture Description
NOTE 4, 5, 6
Total Lobby with Display Area
Number of Fixtures
Watts Proposed
Maximum Allowed Retail Display Lighting Wattage
Maximum Allowed Lighting Wattage
NOTE 1
Proposed Lighting Wattage
Proposed Lighting Wattage
NOTE 3
For all lighting fixtures, indicate lighting control method on plans for spaces and lighting zone(s) served, or exception taken
For permanently installed lighting fixtures in dwelling units, indicate lighting control method on plans for spaces and lighting zone(s) served, or demonstrate compliance with high
efficacy exception
Manual controls
Indicate whether occupancy sensor controls are configured to be manual-on, automatic 50%-on, or serve a space eligible for automatic 100%-on per exception
Additional controls - Specific application lighting controls
Indicate method and location of automatic shut-off vacancy control for supplemental task lighting, including under-shelf or under-cabinet lighting
C406.4
Enhanced digital lighting controls
Include calculation of percent total installed interior lighting power that is configured with required enhanced lighting control functions (min 90% to comply with additional efficiency
package option)
If high efficacy exception is applied to permanently installed lighting fixtures in dwelling units, indicate in lighting fixture schedule if lamps in fixtures are high efficacy per R404.1.
Calculate percentage of fixtures with high efficacy lamps in project (min 75% to comply with exception).
Indicate that exempt exterior lighting is controlled independently from non-exempt exterior lighting; include exception claimed for each fixture or group of fixtures under exception
category
NO Longer used 2015 (1=building area, 2=space-by-space, 3=not specified
Retail Display Allowance from LTG-INT-DISPLAY
Calculation Area
NOTE 9
Lobby Area
Total Lobby Art/Exhibit Proposed Display Watts
LIGHTING CONTROLS
Indicate locations of override switches on plans and the lighting zone(s) served, include area sq. ft.
Indicate toplight daylight zone areas on plans, include sq. ft.;
For small vertical fenestration assemblies (rough opening less than 10 percent of primary daylight zone) where daylight responsive controls are not required, provide fenestration area
to daylight zone calculation(s)
Identify sidelight and toplight daylight zones that are not provided with daylight sensing controls and the exception(s) that apply;
Indicate on plans the lighting load reduction method - continuous dimming, or stepped dimming that provides at least two even steps between 0%-100% of rated power;
Indicate method of manual lighting control and applicable automatic lighting control
To comply with additional efficiency package option, indicate on plans all interior lighting fixtures that are individually addressed and provided with continuous dimming, or exception
taken;
Lighting in dwelling units - lamp efficacy
C406.3
Reduced lighting power density - dwelling unit lamp efficacy
Identify exterior applications eligible for lighting power exemption on plans and in compliance forms; indicate exception applied;
Reduced lighting power density
EXTERIOR LIGHTING POWER & EFFICACY
Lobby Art/Exhibit Display Allowance from LTG-INT-DISPLAY
NOTE 8
Commercial Provision Chapters 1 - 5 of the 2015 Washington State Energy Code apply to all commercial occupancies, R-2, R-3 and R-4 occupancies greater than 3 stories above grade, and
R-1 occupancy (all building heights).</t>
Select this file from the NEEC website to download to your computer. When opening the file be sure to Enable Macros and if applicable Enable Content.
You must select a </t
Calculation Area
on LTG-INT-SPACE or LTG-INT-BLD to enable the calculations in these forms.
You must select a </t
LPA Calculation Type
on LTG-INT-SPACE or LTG-INT-BLD to enable the calculations in these forms.
You must select a </t
Lighting Zone
on LTG-EXT (line 12) to activate this worksheet to display the applicable base site allowance and automatically calculate the applicable exterior lighting power allowances.B54
For Atriums and any space utilizing the additional lighting wattage allowance based on ceiling height per Footnotes d thru f, provide total gross interior area and ceiling height (above
finished floor) in the Maximum Allowed Lighting Wattage table.</t>
All Display lighting shall be entered in the LTG-INT-DISPLAY worksheet. Results from this worksheet automatically transfer to the LTG-INT-SPACE worksheet in the assigned locations under
Retail Display Allowance, Lobby Art/Exhibit Allowance and Proposed Retail Display Lighting cells. </t>
For projects with eligible Retail Sales display lighting that is in addition to Retail Sales general area lighting, select the Retail Display category per Section C405.4.2.2.1 from
the drop down menu provided, and enter the total gross interior area of the footprint illuminated by display lighting in the Maximum Allowed Retail Display Lighting Wattage table. Assign
a corresponding Retail Display category to each lighting fixture type defined in the Proposed Retail Display Lighting Wattage table using the drop down menu. </t>
For projects with eligible Lobby Art/Exhibit display lighting that is in addition to Lobby general area lighting, enter a unique name for each Lobby that this allowance will be applied
to, and enter the total gross interior area of the Lobby in the Maximum Allowed Lobby Art/Exhibit Display Lighting Wattage table. Assign a corresponding Lobby to each lighting fixture
type defined in the Proposed Lobby Art/Exhibit Display Lighting Wattage table. </t>
The total Retail Display and Lobby Art/Exhibit Display gross interior areas entered in the LTG-INT-DISPLAY worksheet may not exceed the total Retail Sales and Lobby Art/Exhibit Display
gross interior areas entered in the LTG-INT-SPACE worksheet.</t>
Retail Area
To print blank forms, delete all of the heading information at the beginning of LTG-SUM. For less than 50% alterations, select the Calculation area in the LTG-INT-SPACE form before
printing. </t
Some forms have multiple pages. All pages are available on screen when you select the tab for a form (worksheet). Use the scroll bars or page down key to find additional pages located
below the first page.</t>
Remaining Site Allowance:
Proposed Retail Display Lighting from LTG-INT-DISPLAY
Lighting, Motor, and Electrical Permit Checklist, Pg. 1
Lighting, Motor, and Electrical Permit Checklist, Pg. 2
Lighting, Motor, and Electrical Permit Checklist, Pg. 3
Lighting, Motor, and Electrical Permit Checklist, Pg. 4
0.075 W/ft
2
0.113 W/ft
2
To comply with additional efficiency package option, demonstrate in compliance forms that total connected interior lighting wattage is 25% less than the total maximum allowed lighting
wattage via Building Area Method or Space-By-Space Method
Indicate location of exit signs on plans and rated watts per fixture in lighting fixture schedule (maximum 5 watts per side)
Bldg. Façade
C405.2.3
C405.2.1.1
C405.2.2.2
C405.2.4
C405.2.5
Indicate on plans the method of manual lighting control (whether combined with occupancy sensor, automatic light reduction, daylight responsive or specific application controls), location
of manual control device and area or specific application it serves
Manual interior light reduction controls
Indicate on plans the method of automatic shut-off control during unoccupied periods (occupancy sensor, time switch or digital timer switch) for all lighting zones;
Indicate digital timer switch control includes: manual on/off, time delay, audible and visual indication of impending time-out
C405.2.5 -
Item 3
C405.2.5 -
Item 4
C405.2.5 -
Item 5
Indicate on plans that non-visual lighting are controlled independently from both general area lighting and other lighting applications within the same space;
C405.2.5
(listed after C405.2.7)
C405.4.1
C405.4.2
Complete required compliance forms – proposed wattage per building area does not exceed maximum allowed wattage per building area; identify locations of building areas on plans
Complete required compliance forms – total proposed wattage does not exceed maximum allowed wattage; identify locations of space types on plans, including retail display areas, lobby
art & exhibit display areas, and ceiling heights as applicable
ADDITIONAL EFFICIENCY PACKAGE OPTION - REDUCED INTERIOR LIGHTING POWER DENSITY
For project with dwelling units, to comply with additional efficiency package option indicate in lighting fixture schedule if lamps in interior fixtures have efficacy rating of 60 lumens
per watt or more. Calculate percentage of fixtures with lamps that have this efficacy rating (min 95% to comply with option)
C503.6
Interior and parking garage lighting fixture alterations
Where ≥ 50% of existing luminaires in interior space(s) or parking garage are replaced; indicate compliance path (building area or space-by-space method); include all new and existing-to-remain
luminaires in compliance form (LTG-INT-BLD or LTG-INT-SPACE); indicate proposed lighting wattage does not exceed maximum allowed per compliance path
Where < 50% of existing luminaires in interior space(s) or parking garage are replaced; indicate total existing lighting wattage in each space prior to alteration; include all new and
existing-to-remain luminaires in LTG-INT-SPACE form; indicate proposed total lighting wattage in alteration area does not exceed total existing lighting wattage prior to alteration
Exterior lighting fixture alterations
Where ≥ 50% of existing exterior lighting wattage is replaced; include all new and existing-to-remain luminaires in LTG-EXT form; indicate proposed total exterior lighting wattage does
not exceed maximum allowed
Where < 50% of existing exterior lighting wattage is replaced; indicate total existing lighting wattage prior to alteration; include all new and existing-to-remain luminaires in LTG-EXT
form; indicate proposed total exterior lighting wattage does not exceed total existing wattage prior to alteration
Interior lighting wiring alterations
Where new wiring is installed to serve new interior luminaires and /or luminaires are relocated to a new circuit; indicate lighting controls are provided (as applicable) - manual (C405.2.3);
occupancy sensor (C405.2.1); daylight responsive (C405.2.4); specific application (C405.2.5); exit signs (C405.3)
Exterior lighting wiring alterations
Where new wiring is installed to serve new exterior luminaires and /or luminaires are relocated to new circuit; indicate exterior lighting controls are provided (C405.2.7)
Lighting panel alterations
Where a new lighting panel is installed or an existing panel is moved (all new raceway and conductor wiring); indicate lighting controls are provided (as applicable) - same provisions
as wiring alterations; time switch controls and manual light reduction controls (C405.2.2)
Interior space reconfiguration
Where interior space(s) is reconfigured (permanently installed walls or ceiling-height partitions); indicate lighting controls are provided (as applicable) - same provisions as lighting
panel alterations
C504.2
Lighting repairs
C505.1
Change of space use
Identify spaces on plans where the building area type or space use type is being changed from one type to another per Tables C405.4.2(1) or (2)
Indicate compliance path (building area or space-by-space method); include all new and existing-to-remain luminaires in compliance form (LTG-INT-BLD or LTG-INT-SPACE); indicate proposed
lighting wattage does not exceed maximum allowed per compliance path
RECEPTACLES
MOTORS, TRANSFORMERS, ELECTRIC METERS, INTERIOR TRANSPORTATION
Electrical transformers
C408.3
Scope of electrical power and lighting systems commissioning
C405.13
C408.1.1
C408.1.2
C408.1.4.2
C103.6
Commissioning requirements in construction documents
Include in general summary that a Cx project report or Compliance Checklist (Figure C408.1.4.2) shall be completed by the Certified Cx Professional and provided to the owner prior to
the final electrical inspection
C408.3.1
Functional performance testing criteria
Identify in plans and specifications the intended operation of all equipment and controls during all modes of operation, including interfacing between new and existing-to-remain systems
C103.6.3
Project close out documentation requirements
Indicate in plans that project close out documentation is required including WSEC lighting compliance forms and calculations that document all interior and exterior lighting area and
/ or surface types, lighting power allowances and installed densities
PROJECT CLOSE OUT DOCUMENTATION
DOCUMENTATION AND SYSTEM REQUIREMENTS TO SUPPORT COMMISSIONING (Cx)
LIGHTING ALTERATIONS
Lighting, Motor, and Electrical Permit Checklist, Pg. 5
Instructions for Electronic Forms, pg. 1
Instructions for Electronic Forms, pg. 2
Each Building Area shall comply independently.</t>
For all other exterior lighting, indicate automatic controls shut off lighting as a function of available daylight; include control sequence that also reduces lighting power by at least
30% between 12am-6am, or from 1 hour after closing to 1 hour before opening, or based upon motion sensor
Identify existing luminaires being upgraded with bulb and / or ballast replacement; indicate fixture alteration does not increase existing fixture wattage
Identify all controlled and uncontrolled receptacles on electrical plans in each space in which they are required; include receptacle configuration such as spacing between controlled
and uncontrolled, duplex devices, etc;
Indicate on plans whether the method of automatic control for each controlled receptacle zone is by occupant sensor or programmable time-of-day control
Indicate automatic controls that de-energize lighting and ventilation fans when elevator is stopped and unoccupied for a period of 15 minutes or more
Where total building lighting load is > 20 kW, or where total lighting load of luminaires requiring daylight sensing and / or occupancy control > 10 kW, indicate that all automatic lighting
control systems are required to be commissioned; or provide building lighting power calculation demonstrating eligibility for exception;
C405.2.5 -
Items 1&2
C405.2.5 -
Item 7
C405.2.5 -
Item 6
For building facade and landscape lighting, indicate automatic controls shut off lighting as a function of dawn/dusk and fixed opening/closing time;
Include general summary with at minimum Items 1 thru 4 of the Cx plan per C408.1.2 including: narrative description of activities, responsibilities of the Cx team, schedule of activities
including verification of project close out documentation per C103.6, and conflict of interest plan (if required);
Indicate that all electrical systems (receptacles, transformers, motors, vertical and horizontal transportation) for which the WSEC requires control functions and / or configuration
to perform specific functions are required to be commissioned;
Indicate Cx requirements in plans and specifications for all applicable electrical and lighting control systems per C408;
Interior Lighting Power Calculation - Indicate compliance path taken
ADDITIONAL EFFICIENCY PACKAGE OPTION - ENHANCED DIGITAL LIGHTING CONTROLS
Revised Nov 2017
LTG-SUM
Interior Lighting System Description
Allowed Watts
x ft
2
(or x lf)
NOTE 2
Fixture Description
NOTE 4, 5
Tradable Proposed Lighting Wattage
NOTE 3
Watts Allowed
(watts/ft
2
x area)
NOTE 2
Compliance by Building Area
NOTE 8
Watts per
Fixture
NOTE 7
Fixture Description
NOTE 3, 4, 5, 6
Calculation Area
NOTE 9
Watts Allowed
(watts/ft
2
x area)
NOTE 3
Total Lobby Art/Exhibit Display Allowance
NOTE 14
Proposed Lobby Art/Exhibit Display Lighting Wattage
NOTE 13
Fixture Description
NOTE 6
Lobby Area
NOTE 10
Maximum Display Watts Allowed
Per Area
NOTE 11
Proposed Display Lighting Total
Per Area
NOTE 12
Retail Display Power Allowance
NOTE 9
Total Retail Proposed Display Watts
NOTE 8
Watts per
Fixture
NOTE 7
Proposed Retail Display Lighting Wattage
NOTE 5
Maximum Retail Display Allowance
NOTE 4
Allowed Watts
per ft
2
, lf or item
Automated Teller Machines
Formula Stash
This file, LTG15-v4.XLSM, has electronic compliance forms for electrical power and lighting system provisions as defined in Section C405 and Chapter 5. This includes interior and exterior
lighting systems, electric motors, and transformers. There are two companion files: ENV15-v4.XLSM (Sections C303, C402, Chapter 5, and Appendix A envelope requirements) and MECH15-v3.XLSM
(Section C403 and Chapter 5 mechanical systems requirements). </t>
Non-Tradable Proposed Lighting Wattage
NOTE 3, 7
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
Mike Kennedy:
This category is only available for <50% cases, and compliance is determined by total wattage so this formula sums all entered watts.
Mike Kennedy:
If extLT50pct then compliance is for sum of non-tradable.
New Building
Addition
Alteration
Interior Lighting Plans Included
Compliance forms do not require a password to use.
Instructional and calculating cells are write-protected.
Select method
used in project.
Applicant Information. Provide contact information for individual who can respond to inquiries about compliance form information provided.
Include PROJ-SUM form (includ
ed in
envelope forms workbook)
with lighting compliance forms.
R404.1 Residential High Efficacy Lighting
.
C406.3 High Efficacy Lighting
C405.2 thru C405.5 Commercial Lighting Controls and LPA
No Dwelling Units
Permanently installed interior lighting fixtures in dwelling units comply with:
To comply with C406.4, no less than 90% of the total installed interior lighting power shall comply with the required controls per C406.4.
All C405.2.1 - C405.2.8 Lighting Controls
Existing interior lighting
systems in areas under-going a change in space use are upgraded to comply with LPAs for the new space types per Tables C405.4.2(1) or C405.4.2(2).
Lamp and/or ballast replacement only – existing total wattage not increased
New wiring installed to serve added fixtures and/or fixtures relocated to new circuit(s)
New or moved lighting panel
Interior
s
pace is reconfigured - luminaires unchanged or relocated only
50% or
more of existing are replaced
50% or more replaced
- T
otal
lighting power of new + existing-to-remain fixtures shall comply with total LPA per Sections C405.4.2 and C405.5.2. Include new + existing-to-remain fixtures in Proposed Lighting Wattage
table in LTG-INT-BLD, LTG-INT-SPACE or LTG-EXT form.
Less than 50% replaced -
Total lighting power of new + existing-to-remain
fixtures
shall not exceed the total lighting power prior to alteration. Include new + existing-to-remain fixtures in the Proposed Lighting Wattage table in LTG-INT-BLD, LTG-INT-SPACE or LTG-EXT
form.
50% threshold
applies to number of luminaires for interior spaces and parking garages, and total installed wattage for exterior luminaires.
Less than 50% of
existing are replaced
New wiring or circuit
- For interior lighting, provide required manual controls per C405.2.3, occupancy sensor controls per C405.2.1, daylight responsive controls per C405.2.4 and application specific lighting
controls per C405.2.5. For exterior lighting, provide required controls per C405.2.7.
New or moved panel -
Provide all applicable lighting controls as noted for New Wiring
and
automatic time switch controls per
C405.2.2.
Reconfigured interior space -
Provide all required
l
ighting controls that apply to a new interior space.
Application specific lighting control provisions per C405.2.5 do not apply to reconfigured spaces.
Select all Lighting Power and Lighting Control elements that apply to the scope of the retrofit project. If project includes a combination of spaces where less than 50% of the existing
fixtures are replaced in some spaces, and 50% or more of the fixtures are replaced in others, then provide separate lighting power compliance forms for the two retrofit conditions.
Spaces undergoing the same type of retrofit may be combined into one lighting power compliance form.
Refer to Section
C503.6
for additional requirements.
All alteration lighting controls shall be commissioned per C408.3.
Identify interior spaces requiring
LPD upgrade to the current Code in Proposed Lighting Wattage table in LTG-INT-BLD or LTG-INT-SPACE form.
Addition is combined with existing:
For
interior
lighting projects, i
nclude new +
existing-to-remain interior lighting fixture wattage in Proposed Lighting Wattage table in LTG-INT-BLD or LTG-INT-SPACE form.
For
exterior
lighting projects, i
nclude new +
existing-to-remain exterior lighting fixture wattage in Proposed Tradable and Proposed Non-Tradable Lighting Wattage tables in LTG-EXT form.
Refer to Section
C502.2.6
for additional requirements.
Lighting
systems in
addition area
comply
with all applicable provisions as a stand alone new construction project
Lighting systems in a
ddition
are
combined with existing building lighting systems to demonstrate compliance
Briefly describe interior lighting system type and features.
Additional Efficiency Package Option C406.4 Enhanced Digital Lighting Controls
C405.2 Exception 5 Luminaire Level Lighting Controls (LLLC)
Dwelling unit lighting complies with WSEC Residential provisions in lieu of WSEC Commercial provisions.
Briefly describe exterior lighting system type and features.
Building Area Method
Space-by-space Method
No changes are being made to the interior or exterior lighting systems and existing space uses
and configuration are
not changed.
Select method of compliance for lighting controls.
No Lighting Scope
Exterior Lighting Plans Included
—
—
+
+
Total Proposed Watts may not exceed Total Allowed Watts for Interior Lighting
Addition
+ existing
Clear
Addition -
stand alone
Spaces where ≥ 50% of luminaires are replaced
Spaces where < 50% of luminaires are replaced
Spaces where the Use is changing (C505)
New Construction
To comply with C406.3, the Proposed LPD shall be 25% lower than the Target LPA. Refer to C406.3 for additional requirements.
Additional Efficiency Package Option
C406.3 Reduced Interior Lighting Power
Standard
Clear
Note 1 - List all unique space types per Table C405.4.2(2) that occur in the project scope. Select space type category from drop down menu.
Note 2 -
Indicate
ceiling
height
for atriums
and spaces utilizing the ceiling height adjustment per Table C405.4.2(2), Footnotes d thru f.
Note 3 - List all proposed lighting fixtures including exempt lighting equipment and existing-to-remain fixtures.
Note 4 - For proposed Fixture Description, indicate fixture type, lamp type (e.g. T-8), number of lamps in the fixture, and ballast type (if included). For
track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information. </a:t></a:r><
Note 5 - For lighting equipment eligible for exemption per C405.4.1, note exception number and leave Watts/Fixture blank.
Note 6 - Existing-to-remain fixtures shall be included in the Proposed Lighting Wattage table in the same manner as new fixtures. Identify as existing
in fixture description.</a:t></a:r><
Note 7 - For proposed Watts/Fixture enter the luminaire wattage for installed lamp and ballast using manufacturer or other approved source. For
luminaires with screw-in lamps, enter the manufacturer's listed maximum input wattage of the fixture (not the lamp wattage). For low voltage</a:t></a:r><
lighting, enter the wattage of the transformer. For </a:t></a:r><
l
ine voltage track/busway systems, enter the larger of the attached luminaire wattage or 50
watts/lineal foot, or enter the wattage limit of permanent current limiting device.</a:t></a:r><
Note 8 - Lobby Art/Exhibit Display Allowance is independent of the Maximum Allowed Lighting Wattage. Enter all proposed lobby art/exhibit display
fixtures in LTG-INT-DISPLAY form only.</a:t></a:r><
Note 9 - Calculation Area Details:
a. </a:t></a:r><a
Lighting fixtures in a building addition may comply as a stand alone project, or they may be combined with the overall existing building
lighting systems to demonstrate compliance. Refer to C502.1.</a:t></a:r><a:end
b. For alterations and building additions, provide Space Types and gross interior areas in the Maximum Allowed Lighting Wattage table. If a</a:t></a:r></
building addition will comply as combined with the overall existing building lighting systems, include all applicable existing Space Types </a:t></a:r></a:p>
and gross interior areas.</a:t></a:r><a:end
c. If less than 50% of existing lighting fixtures will be replaced, provide total existing lighting wattage (prior to alteration) in the space provided </a:t></a:r></
in the Maximum Allowed Lighting Wattage table.</a:t></a:r></a:p>
d. If lighting alteration project includes some building areas or spaces where < 50% of lu< 50% of luminaires are replaced, and other areas or spaces
where ≥ 50% of luminaires are replaced, then these areas or spaces may be documented separately. If multiple forms will be completed</a:t></a:r></a:p>
to demonstrate compliance for the total scope of the alteration project, describe scope covered in form in User Note section.</a:t></a:r><a:end
User Note
—
—
+
+
Note 1 - Select retail sales areas from drop down menu. Only retail sales areas that comply with C405.4.2.2.1 may be entered in this table.
Note 2 - Retail display lighting power allowances per C405.4.2.2.1, Equation 4-11.
Note 3 -
Unlit Message
- Enter lighting fixture information for this retail sales area in Proposed Lighting Wattage table to generate Lighting
Power Allowance.</a:t></a:r><
Note 4 - Maximum retail display wattage allowance as calculated per C405.4.2.2.1, Equation 4-11.
Note 5 - Only separately controlled retail display fixtures that are independent of general area lighting per C405.4.2.2.1 may be entered in
this table.</a:t></a:r><
Note 6 - For proposed Fixture Description, list ALL proposed display lighting fixtures. Indicate fixture type, lamp type
(e.g. T-8), number of
lamps in the fixture, and ballast type (if included). For track lighting, </a:t></a:r><
list the length of the track (in feet) in addition to the fixture,
lamp, and ballast information.</a:t></a:r><
Note 7 - For proposed Watts/Fixture enter the luminaire wattage for installed lamp and ballast using manufacturer or other approved source.
For luminaries with screw-in lamps, enter the manufacturer's listed maximum input wattage of the fixture (not the lamp wattage). For</a:t></a:r><
low voltage lighting, enter the wattage of the transformer. For </a:t></a:r><
l
ine voltage track/busway systems, enter the larger of the attached
luminaire wattage or 50 watts/lineal foot, or enter the wattage limit of permanent current limiting device.</a:t></a:r><
Note 8 - Total Retail Proposed Display Watts is automatically entered into the Proposed Fixture Wattage table in LTG-INT-SPACE.
Note 9 - Retail display lighting power allowance is the lesser of the Maximum Retail Display Allowance OR the Total Retail Proposed
Display Watts. Retail display wattage allowance is automatically entered in the Maximum Allowed Lighting Wattage table in </a:t></a:r><
LTG-INT-SPACE.</a:t></a:r><
Note 10 - Enter a unique title for each lobby area in the project that has seperately controlled art/exhibit display lighting. A lobby area title
(Column A) and the gross interior sf of the lobby area are are both required to generate the maximum display allowance.</a:t></a:r><a
Note 11 - Lobby art and exhibit display wattage allowance per Table C405.4.2(2), Footnote c = 0.5 W/ft
2
.
Note 12 - Proposed display lighting totals for each lobby area per information entered into Proposed Lobby Art/Display Lighting Wattage table.
Note 13 - Only separately controlled display fixtures installed in lobbies for the purpose of highlighting art and exhibits, that are independent of
general area lighting, may be entered in this table. </a:t></a:r></a
Note 14 - Lobby Art/Exhibit Display Allowance is automatically entered in LTG-INT-SPACE.
Proposed
Retail Display Lighting Totals from LTG-INT-DISPLAY
Retail 1
—
+
—
+
General Note
- In Sales areas, an increase in lighting power allowance is permitted for lighting installed specifically for the purpose of highlighting merchandise. Only Sales areas illuminated with
eligible merchandise display lighting may be included in the Gross Interior Area under each Retail category. This lighting power allowance is the Maximum Retail Display Allowance OR
the Total Retail Proposed Display Watts, whichever is less. Proposed retail display lighting wattage that exceeds this allowance is applied to general area lighting.
General Note
- In Lobby areas, an additional wattage allowance is permitted for lighting installed specifically for the purpose of highlighting art and exhibits. Only Lobby areas with eligible display
lighting may use this additional allowance. Proposed display lighting for each Lobby area may not exceed this allowance.
* See
footnotes on previous page
User Note
—
—
+
+
Note 1 - List all unique building areas per Table C405.4.2(1) that occur in the
project scope. Select building area category from drop down menu.</a:t></a:r><
Note 2 -
Unlit Message
- Enter lighting fixture information for this building area surface in Proposed Lighting Wattage table to generate Lighting
Power Allowance.</a:t></a:r><
Note 3 - Proposed fixtures must be listed in the building area in which they occur. List all proposed lighting fixtures including exempt
lighting equipment and existing-to-remain fixtures. </a:t></a:r><
Note 4 - For proposed Fixture Description, indicate fixture type, lamp type (e.g. T-8), number of lamps in the fixture, and ballast type (if included).
For track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information. </a:t></a:r><
Note 5 - For lighting equipment eligible for exemption per C405.4.1, note exception number and leave Watts/Fixture blank.
Note 6 - Existing-to-remain fixtures shall be included in the Proposed Lighting Wattage table in the same manner as new fixtures. Identify as
existing in fixture description.</a:t></a:r><
Note 7 - For proposed Watts/Fixture enter the luminaire wattage for installed lamp and ballast using manufacturer or other approved source. For
luminaires with screw-in lamps, enter the manufacturer's listed maximum input wattage of the fixture (not the lamp wattage). For low voltage</a:t></a:r><
lighting, enter the wattage of the transformer. For </a:t></a:r><
l
ine voltage track/busway systems, enter the larger of the attached luminaire wattage or
50 watts/lineal foot, or enter the wattage limit of permanent current limiting device.</a:t></a:r><
Note 8 - Proposed Wattage for each Building Area type shall not exceed the Allowed Wattage for that Building Area type. Trading wattage
between Building Area types is not allowed under the Building Area Method compliance path.</a:t></a:r><
Note 9 - Calculation Area Details:
a. </a:t></a:r><a
Lighting fixtures in a building addition may comply as a stand alone project, or they may be combined with the overall existing building
lighting systems to demonstrate compliance. Refer to C502.1.</a:t></a:r><a:end
b. For alterations and building additions, provide Building Area types and gross interior areas in the Maximum Allowed Lighting Wattage</a:t></a:r></
table. If a building</a:t></a:r><a:r><
addition will comply as combined with the overall existing building lighting systems, include all applicable existing
Building Area types and gross interior areas.</a:t></a:r><a:end
c. If less than 50% of existing lighting fixtures will be replaced, use LTG-INT-SPACE form to document compliance.</a:t></a:r><a
Addition
+ existing
Clear
Addition -
stand alone
Spaces where ≥ 50% of luminaires are replaced
Spaces where < 50% of luminaires are replaced
Spaces where the Use
is changing (C505)
New Construction
To comply with C406.3, the Proposed LPD shall b
e 25% lower than the Target LPA.
Refer to C406.3 for additional requirements.
Additional Efficiency Package Option
C406.3 Reduced Interior Lighting Power
Standard
Clear
NOTE 1
User Note
Zone 4
Exemption
—
Clear
—
+
—
—
+
+
Controlled by motion sensor
Zone 3
Zone 2
Zone 1
Non-tradable proposed watts may not exceed allowed watts for any individual surface unless the total excess watts for all non-tradable surfaces are less than the remaining site allowance.
Total proposed tradable watts may not exceed the sum of total allowed tradable watts plus the base site allowance. Any base site allowance not needed to make tradable watts comply can
be applied to individual non-tradable categories.
+
Addition
+ existing
Clear
Addition - stand alone
Alteration with ≥ 50% ext. wattage replaced
Alteration with < 50% ext. wattage replaced
New construction
Exterior
Lighting Z
one selection required to enable LTG-EXT form. Zones are defined in
Table C405.5.2(1) and specified by the jurisdiction.
Applies to individual luminaires > 100 Watts
Efficacy > 80 lumens/watt
Enter Total
Existing Watts
User Note
Note 1
- List all exterior surfaces per Table C405.5.2(2) that occur in the project scope. Select exterior surface categories from drop down menu.
Note 2
-
Unlit
Message
- Enter lighting fixture information for this surface in Proposed Lighting Wattage table to generate Lighting Power Allowance.
Note 3
- List all proposed lighting fixtures including existing-to-remain fixtures.
Note 4
- For proposed Fixture Description, indicate fixture type, lamp type, number of lamps in the fixture, and ballast type (if applicable).
Note 5
- Existing-to-remain fixtures shall be included in the Tradable and Non-Tradable Proposed Lighting Wattage tables in the same manner
as new fixtures. Identify as existing in fixture description.</a:t></a:r><
Note 6
- For proposed Watts/Fixture enter the luminaire wattage for installed lamp and ballast using manufacturer or other approved source. For
luminaires with screw-in lamps, enter the manufacturer's listed maximum input wattage of the fixture (not the lamp wattage). For low </a:t></a:r><
voltage lighting, enter the wattage of the transformer.</a:t></a:r><
Note 7
- Automated Teller and Night Depositories - For each location, enter the number of ATM machines or depositories within that location. If
there are multiple locations in the project, enter each location individually in the Non-Tradable Maximum Allowed Lighting Wattage table</a:t></a:r><
and identify the location in the Surface Description section.</a:t></a:r><
The following information is necessary to check a permit application for compliance with the lighting, motor, and electrical requirements in the Washington State Energy Code, Commercial
Provisions.
The following information is necessary to check a permit application for compliance with the lighting, motor, and electrical requirements in the Washington State Energy Code, Commercial
Provisions.
The following information is necessary to check a permit application for compliance with the lighting, motor, and electrical requirements in the Washington State Energy Code, Commercial
Provisions.
The following information is necessary to check a permit application for compliance with the lighting, motor, and electrical requirements in the Washington State Energy Code, Commercial
Provisions.
The following information is necessary to check a permit application for compliance with the lighting, motor, and electrical requirements in the Washington State Energy Code, Commercial
Provisions.