WoundHealing2.pdf
City of Edmonds
PLAN REVIEW COMMENTS
BUILDING DIVISION
(425) 771-0220
DATE: August 20, 2008
TO: Stephan Rehnfeldt
E-mail: srehnfeldt@stevenshospital.org
FROM: Ann Bullis, Building Official
RE: Plan Check: 2008-0528
Project: Wound Healing Clinic
th
Project Address: 21911 76 Ave W
During review of the plans for the above noted project, it was found that the following information,
clarifications or changes are needed. Please provide written responses to each comment, including
consultant comments, as to how it has been addressed, and where changes can be found on the
plans. Please submit revised plans/documents to a Permit Coordinator.
1.As discussed at the meeting on 7/23/08, the minimum separation distances for the O2 tank
required by Chapter 9 of NFPA (as noted in the Fire Marshals comments dated 8/20/08) must
be provided unless 2 hour fire barrier walls are installed to interrupt the line of sight between he
uninsulated portions of the tank and the exposure. The exposure distance lines shown on the
site plan extend onto the neighboring property to the south and west of the proposed tank
th
location, which would not be permitted since the property owners of 21911 76 Ave W have no
control over that property and what is constructed on it. Relocated the O2 tank or provide 2
hour fire barrier walls as part of this permit application to address this exposure issue.
2.If fire barrier walls are provided (as noted in #1 above), provide construction details and listed &
tested 2 hour fire rated assembly on the plans. Structural calculations (wind and seismic) must
also be provided for the walls. Contact Michael Clugston, Planner for this project, regarding
ADB review requirements.
3.On the site plan show the location of the diesel generator for the subject property, and any other
structures, hazardous materials, etc. that affect the exposure distances noted in #1 above.
4.A fence permit is required to replace the existing fence on the adjacent property. The adjacent
property owner must apply for the fence permit, or if the Architect will be applying for the fence
permit on the owners behalf, provide a letter from the owner stating you are acting as his/her
agent for the fence permit. (See items 1 & 2 above regarding exposure distances)
5.On Sheet T1.10, note the suite number of the tenant space. Also, change the occupant load code
reference to 2006 instead of 2003.
6.The Statement of Special Inspection was not provided (previous item 8). All items noted in IBC
1705.1, 1705.2, 1705.3 applicable to this project must be addressed in the statement on the
plans. Complete the enclosed Special Inspection and Testing Agreement and return for City
approval prior to permit issuance.
7.Add medical gas system to the separate permits list. During review of that permit application,
third party system verifier information must be provided.
8.Notation 02/A/* on Sheet T2.00 needs to be cross-referenced to the wall assemblies on Sheet
T3.10. The 1-hour column detail needs to be cross-referenced as to where it applies. (previous
item 1f)
9.Sheet T2.10 shows that a suspended ceiling system will be used, however your response letter to
previous item 1i states there will not be a suspended ceiling system. Please clarify.
10.Note the size of the O2 tank on the site plan (previous item 1k).
11.The Contractor Statement of Responsibility still needs to be provided. (previous item 10)
12.Show and label the chamber exhaust lines on the elevation view.
Page 2 of 2