FIR2020-0089_Fire_Alarm_Equipment_Specification_Sheets_11.20.2020_6.50.14_AMStarLink
COMMERCIAL FIRE CELLULAR & IP
Commercial Fire Alarm Cellular &/or IP
Fire Alarm Communicators
• Universal full event sole & dual path cellular &/or IP commercial
fire alarm reporting from any panel brand, virtually anywhere
nationwide
Code -compliant, replaces 2 POTs lines per FACP saves thousands
of dollars per year over the leased landlines
Supports 12V-24V control panels and FACPs that communicate using
Contact ID and 4/2 (such as on legacy panels), as primary or backup
Full data Reporting to any Central Station nationwide, via choice
of LTE Networks, Verizon®or AT&T®. Communicate critical life
and safety alarm reports on LTE (Long Term Evolution) 10+ year
life, cyber-protected multi -billion dollar cellular network, for
maximum life safety & liability protection.
• Proven to work even where other's won't - using Signal BoostTM'
& twin dual diversity antennas - Max. signal acquisition & null
avoidance (receives signals simultaneously on both antennas)
• Easiest installation, powered by panel, NO extra power supply,
NO extra conduit. (Excludes Direct AC -Powered "-PS" models, with
transformer option.) t
• Dual Path Cellular/IP Models Save Time & Money -Uniquely
including 4 programmable EOLR zone inputs; 2 Form C Relay outputs
(no extra supervision modules to buy or install); plus, 2 Telephone -
style jacks for easy FACP-connection. Self -supervised on 4 wires.
• Preactivated to ensure communications - saves time and labor onsite
• LED Status /Trouble Indicators 3 Radio Status LED Indicators
(visible from outside standard model housing) - Green, Signal
Strength; Amber- Busy/Activation; Red -Trouble (4 additional LEDs,
not visible, for network status & troubleshooting). Power LED
indicator viewable on outer metal enclosure models.
• Over -the -Air Upgradable Communicator Firmware. Remote
ability for critical/mandatory updates, without a truck -roll
• Cost -saving models and plans for any code requirement.
Dramatic savings over monthly dedicated landline charges.
UL and NFPA 72 Fire Code -Compliant, the StarLink Series
Wireless Commercial Fire Alarm Sole Path & Dual Path
Communicators provide universal support for any brand
12V to 24V fire alarm control panel, reporting in Contact
ID and 4/2. With broadest LTE coverage footprint, Verizon
or AT&T, using proven StarLink circuitry, they are also
available in locking metal models. All provide the most
economical solution for easy, versatile installation. Also
regional compliances, i.e., CSFM, NYCFD, LAFD and more.
Easy, Universal Installation at Every Application; Panel -
Powered Technologr. StarLink Fire Communications are
easily connected to any panel or Fire Alarm Control Panel
(FACP) standardly operating between 12V and 24V. Flexible
in any application, StarLink Fire also comes in standard, or
models in metal housings, with code -compliant supervision,
and choice of power options, Panel -Powered Technology'"
(powered by the panel), or direct -connect 120VAC models.
Signal Boost circuitry & dual diversity antennae for
maximum signal acquisition & null avoidance, receiving
signals simultaneously on both antennae.
Flexible Performance & Reporting Options. StarLink Fire
provides full data reporting, in sole and dual path, as a
primary or backup, to any central station of your choice,
without requiring any special equipment on premises.
Ultra -affordable plans are available to meet various codes
and requirements, with supervisory check -ins from 200
seconds, to 5 minutes; and/or from 1 to 6 hours. The units
are very easily activated, plans and options are selected,
and 24/7 account management is provided all through
www.napcocomnet.com.
Napco StarLink Universal Fire Alarm
Communicators
• Sole Path Cellular and Dual Path Cellular &/or IP Models
• Choice of LTE Networks, Verizon or AT&T models
• Choice of plans (varies by model) - check -ins from 200
seconds to 5-minutes, and from 1 hour; up to 6 hours for
dual path
• Patented Signal Boost"' and Dual Diversity Antennae
for maximum signal acquisition & null avoidance, receiving
signals simultaneously on both antennae
• Money -saving Tradeup incentive credit for security
professionals, on new or retrofit fire systems, i.e., tradeup
missing/retired POTS lines, old radios & networks or new
installations
• Bonus: Full High -Speed Napco Panel remote uploading/
downloading
• COMPLIANCES: NFPA 72 Editions: 2019, 2016, 2013, 2010,
2007; UL 864, 10th Ed., UL1610, UL985, UL1023, NYCFD;
CSFM; LAFD
4:=� connected by AT&T veriion✓ NFP
Code -compliant standard or metal models on choice of Verizon orAT&T LTE networks.
rLin *ire-
,PL
COMMERCIAL FIRE CELLULAR & IP
Model Ordering & Specifications
Commercial Fire Alarm Cellular &/or IP
Fire Alarm Communicators
verizon AT&T
Unique Onboard Other Power
LTE WINElectrical Input
Network Cell IP Option" Labor/Cost-Saver Patings Inputs Input Ratings Outputs Output Ratings Supply
Features (option)
1
SOLE PATH
Panel -Powered
SLE-LTEA-FIRE7VerizonYes
No
No
Input Voltage/Input
IN1: 9-25VDC Max input
PGM1,
Open Collector Outputs Max
Current:10V=90mA;
IN1,IN2,
current 2lIN2,IN3:
PGM2,
3V when active, Max 25V
12-25V = 71 mA,
IN3
9-25VDC Max in ut
PGM3
when not alive. Max current
SLE•LTEV•FIRE
No
No
200mA peak
P 9
current1.2mA
24rl25V
transmissions
DUAL PATH
SLEATEAI-FIRE
AT&T
Yes
Yes
Yes
2 TelCo jacks for EZ Panel -Powered OUT1,OUT2:Dry Contact, Form
FACP Connect; 4 IN1: 9-25VDC Max
ProgrammableEOLR InputVoltage:10-25VDC: C Relay, 30VAC/DC, 500mA
IN1,IN2, inputcurrent2mA OUT1,
Input Current:162mA Max PGM3: Open Collector
zone inputs; 2 Form C IN3, IN4, IN2,IN3,IN4,IN5: 0UT2, Outputs Max 3V when active,
to 100mAstandby;
SLE-LTEVI-FIRE
Verizon Yes
Yes
Yes
Relay outputs (avoids IN5 9-25VDC Max input PGM3
regtfor 300lpeakduring Max25Vwhen active. Max
.
current12mA
ule)ision transmissions current 24mA@ 25V
module)
r
SOLE PATH
Panel-PoweredTech'y:TM
SLE-LTEA-CFB
AT&T
Yes
No
No
Input Voltage/Input
IN1: 9-25VDC Max input
PGM21
Open Collector Outputs Max
Current:10V=90mA;
IN1,IN2,
current 2mAIN2,IN3:
PGM2,
3V when active, Max 25V
12-25V = 71 mA,
IN3
9-25VDC Max inputpeak
PGM3
when not active. Max current
SLE-LTEV-CFB
Verizon
Yes
No
No
200mA P
current
24l25V
transmissions
SLE-LTEA-CFB-PS
AT&T
Yes
No
No
Direct AC -Powered: Input
Voltage: 120VAC nominal
IN1: 9-25VDC Max input
PGM2,
Open Collector Outputs Max
Transformer
Input Current: 150mA
IN1,IN2,
current 2lIN2,IN3:
PGM2,
3Vwhen active, Max 25Vwhen
Maximum
(TRF12
16VAC, 20VA
max; maximum charging
IN3
9-25VDC Max input
PGM3
not active. current
SLE-LTEV-CFB-PS
Verizon
Yes
No
No
current:200mA
current1.2l
24mA@25V
transformer)
DUALPATH
SLE-LTEAI-CFB
AT&T
Yes
Yes
Yes
2 TelCo jacks for EZ
FACP Connect; 4
Panel-PoweredTech'y.TM
IN1: 9-25VDC Max
OUT1,OUT2:Dry Contact, Form
Programmable EOLR
zone inputs; 2 Form
InputVoltage:10-25VDC:
Input Current:162mA
to100mAstandby;
IN11IN21
inputcurrent2mA
OUT1,
C Relay, 30VAC/DC, SOOmA
Max PGM3: Open Collector
Outputs Max 3V when active,
SLE-LTEVI-CFB
Verizon
Yes
Yes
Yes
Relay outputs (avoids
regtforsupervision
300l peak during
IN5
9-25VDC Max input
current1.2mA
PGM3
Max 25Vwhen active. Max
module)
transmissions
current24l25V
SLE-LTEAI-CFBPS
AT&T
Yes
Yes
Yes
2 TelCo jacks for EZ
FACP Connect; 4
Direct AC -Powered: Input
IN1:9-25VDC Max
OUT1,OUT2:Dry Contact, Form
CRelay,30VAC/DC,SOOmA
Transformer
Programmable EOLR
zone inputs; 2 Form C
Voltage:120VAC nominal
Input Current: 200mA
IN1, IN2,
IN3, IN4,
input current 2mA
IN2,IN3,IN4,IN5:
OUT1,
OUT2,
Max PGM3: Open Collector
Outputs Max 3 pen C active,
(nsfor
16(TRF 2
SLE-LTEVI-CFBPS
Verizon
Yes
Yes
Yes
Relay outputs (avoids
regtfor supervision
max; maximum charging
current:200MA
IN5
9-25VDC Max input
current 1.2mA
PGM3
Max 25Vwhen alive. Max
transformer)
module)
current 24l 25V
ACCESSORIES:
SLE-WIFI-MODULE Optionally connects supported dual path models to
Internet via WiFi, eliminating Ethernet cable connection. Requires 7AH batty.
('*See details WI2191)
SLE-ANTEXT75 Optional extended range omni. antenna w/ 75' cable,
premium low -loss cable Mull mounting hardware & ground fault isolation
mounting plate
SLE-ANTEXT5O As above, with 50' cable
SLE-ANTEXT3O As above, with 30' cable
TRF12 Optional Plug in AC Transformer, 16.5V / 20VA (use
is subject to local code compliance)t
Free Commercial Fire LTE Tradeup Trifold
Brochures / Mailers/Stuffers (A747)
.1
nStarLiink Fire.
333 Bayview Ave., Amityville, NY 11701 • 1-800-645-9445 • www.napcosecurity.com
FireLink Integrated Fire Alarm Control
' Panel w/ StarLink Fire LTE Built In.
' FL-32FACP-LTEV Firewolf 8 Zone 24V Conventional
Commercial Fire Alarm Control Panel with onboard
StarLink Fire® Sole Path, Verizon LTE Cellular
Alarm Communicator and integral menu -driven
LCD annunciator, w/ 4amp, 24V power supply.
Optionally expandable up to 32 points/zones via
commercial addressable, wireless or conventional
fire devices (2 onboard NACs providing up
to 4A notification power). Locking, metal red
enclosure,(surface or flush mount*) removable
16"xl7" door w/14.25"xl6" base. Houses 16Ah
battery backup.
Note: Always consult technical manual and/or AHJ for compliance requ [rem@ nts for your area/appllication. StarLink, StarLink Fire, Fire Link, Signal Boost, Panel -Powered Technology, Gemini &Gemini Commercial are trademarks of Napco. AT&T, Verizon, LTE, etc. are trademarks
of their respective companies. *StarLink offers full data coverage in US from virtually all panel brands reporting in Contact ID or4/2. tt For Panel -Powered technology, regulated auxiliary power outputs are required on Listed FRCP. **Add 40mAto input current& Standby Battery
requirement. tWhere permitted by AU; requires conduit.. For full details on the StarLink tradeup incentive see online under http://wow.napcosecuriry.com/starlink/starlink4gupgrade/ tProm o subject to change w/o prior notice. LTE lifespan claims are based on those of carriers.
ONAPCO, NAPCO Security Technologies Inc. (NASDAQ:NSSC) A734A2019.8