Building Permit 2020ERCIAL ■ LDG Permit
NU
ity of Edmonds
EdmondsPERMIT
98020 BLD2019-1
-. •.
Type: COMMERCIAL BLDG Owner/ Business: OLSEN MARY TRUST Status: ISSUED
Subtype: NEW COMMERCIAL BLDG
Parcel No: 00454800101300 Site Address: 202 MAIN ST EDMONDS,WA 98020-3134
Applied: 9/3/2019
Subdivision: 004344, 004548 Lot:
Issued: 6/12/2020
Fire Sprinklers: Yes Lot Area: 14,441 Zoning: BD2
Final:
Valuation: $831,718.84 Occupancy Type: B/A-2/S-2 Construction Type: VB
Expiration Date: 6/13/2021
Code Edition: 2015 No. Stories: 1 # of Dwelling Units: 0
Issued by: JOK
Scope of Work: GRAPHITE - ART STUDIO, GALLERY & CAFE. PLB, MECH, FS SEP.
WA State Contractor L & I #: WGCLAC*370N0 City of Edmonds Business License #: 602454996-001-0001
CONTACTS
NAME TYPE NAME ADDRESS PHONE
EMAIL
APPLICANT DAVID PELLETIER 26911 98TH DRIVE NW STE B, (360)629-5375
DPELLETIER@PELLETIERSCHAAR.COM
STANWOOD WA 98292
CONTRACTOR W.G. CLARK CONSTRUCTION 1945 YALE PLACE EAST, SEATTLE (206)624-5244
SORTEGA@WGCLARK.COM
WA 98102
221 2ND AVE N, EDMONDS WA
OWNER OLSEN MARY TRUST
98020-3103
FEE INFORMATION
DESCRIPTION
ACCOUNT AMOUNT
PAID PAID DATE RECEIPT #
B-BUILDING PERMIT FEE
001.000.322.10.000.00
$6,316.00
B-BUILDING PLAN REVIEW FEE
001.000.345.83.000.00
$7,222.00
$7,222.00
9/3/19
REC077334
B-STATE BUILDING CODE
001.000.237.150
$25.00
SURCHARGE
INDEPENDENT TRAFFIC IMPACT FEE
112.502.345.86.000.00
$45,006.08
$0.00
PARK IMPACT FEE - COM ADMIN
001.000.322.10.000.00
$100.00
$0.00
PARK IMPACT FEE - NON
332.100.345.85.000.00
$14,920.90
$0.00
RESIDENTIAL SQFT
TRANSPORTATION IMPACT ADMIN
001.000.341.82.000.00
$100.00
$0.00
FEE - MF COMM
X-TECHNOLOGY FEE
001.000.321.99.100.00
$35.00
TOTALS: $73,724.98 $7,222.00
CONDITIONS
CONDITION TYPE
STATUS
NOTES
FOR
BUILDING CONDITIONS
INFORMATION
Work approved under this permit may or may not qualify as an essential or allowed
activity per the Governors Stay Home, Stay Healthy Order. Refer to the Order and the
FOR
Citys website for up-to-date information related to development activities during COVID-
COVID-19 NOTICE
INFORMATION
19. Issuance of this permit does not certify that construction is allowed to immediately
occur, and inspections may or may not be granted accordingly. Construction activities and
all required inspections will resume when the Order has been lifted.
Printed: Friday, June 12, 2020 9:02:49 AM 1 of 3
■ LDG Permit
PERMIT NUM
of Edmonds
EdmondsCity
•:i 1 '
www.edmondswa.gov •
Contractor/Owner shall be responsible for repair/replacement of all damage to utilities
DAMAGE TO FRONTAGE
FOR
and/or frontage improvements in city right of way per city standards that is caused by or
IMPROVEMENTS
INFORMATION
occurs during the permitted project.
ELECTRICAL PERMIT
FOR
Obtain Electrical Permit from State Department of Labor and Industries 425-290-1309.
NFORMATION
ELECTRICAL PERMIT
FOR
Obtain Electrical Permit from State Department of Labor and Industries 425-290-1309.
NFORMATION
EXIT SIGNAGE AND EMERGENCY
Final locations of illuminated exit signs and emergency lighting subject to field inspection
LIGHTING
PRIOR TO FINAL
by the Fire Marshal.
FOR
In addition to the required pressure relief valve an approved listed expansion tank shall
EXPANSION TANK
INFORMATION
be installed on all hot water tanks per UPC 608.
FOR
The engineering division requires 48 hours notice prior to the date of the FINAL
FINAL INSPECTION SCHEDULING
INFORMATION
Inspection. Please call 425-771-0220 x 1326 to schedule.
FIRE EXTINGUISHERS
O
Provide 2A 106C portable fire extinguishers at locations noted on approved plans.
ORMATION
LOT LINES STAKED
FOR
Lot line stakes must be in place at the time of foundation setback inspection.
NFORMATION
Installation, use and maintenance of equipment and components shall be per
MANUFACTURER SPECS
FOR
manufacturers specifications, installation instructions, and applicable state codes.
INFORMATION
Provide manufactures installation instructions on site for Building Inspector.
Maximum Height 25 feet. The agent or contractor shall set up the equipment; establish
the datum point and the point of average grade. Call for inspections to verify. These
MAXIMUM HEIGHT
FOR
items must be consistent with the approved plan. If the proposed height of a building is
INFORMATION
within 12 inches of the maximum height permitted for the zone an elevation survey is
required.
Final approval on a project or final occupancy approval must be granted by the Building
OCCUPANCY
FOR
Official prior to use or occupancy of the building or structure. Check the job card for all
INFORMATION
required City inspections including final project approval and final occupancy inspections.
Any request for alternate design, modification, variance or other administrative deviation
FOR
from adopted codes ordinances or policies must be specifically requested in writing and
PERMIT DISCLAIMER
INFORMATION
be called out and identified. Processing fees for such requests shall be established by
Council and shall be paid upon submittal and are nonrefundable.
The issuance of this permit in no way constitutes approval from any other agencies
REGULATING AGENCIES
FOR
having regulatory authority over the facility and this construction activity. It is the
INFORMATION
responsibility of the property owner to obtain any and all such required approvals.
SPECIAL INSPECTIONS REQUIRED:
By the Geotechnical Engineer:
• Grading/Soils/Drainage
SPECIAL INSPECTIONS ARE REQUIRED FOR THE FOLLOWING:
REQUIRED SPECIAL
PRIOR TO FINAL
•Concrete Construction, Including Reinforcement
INSPECTIONS
*Structural Steel Fabrication and Erection, Including
High -Strength Bolting and Welding (Welders Must Be
WABO Certified)
*Lateral Wood
Separate Permit Required For:
Plumbing
Mechanical
SEPARATE PERMIT REQUIRED
FOR
Fire Sprinkler
INFORMATION
Fire Alarm
Future TI of Cafe space
FOR
All new extended rebuilt or relocated electrical utility and/or service shall be placed
UNDERGROUND WIRING
INFORMATION
I underground.
Printed: Friday, June 12, 2020 9:02:49 AM 2 of 3
■
SEQID
INSPECTION TYPE
INSPECTOR
COMPLETED
DATE
RESULT NOTES
X-1 PLANNING FINAL
X-3 BUILDING FINAL"
F-9 FIRE DAS SYSTEM EVAL
F-1 FIRE DEPT INSPECTION
X-1 FIRE FINAL
F-2 FIRE DCDA
B-3 UNDERFLR FRAMING
B-2 SLAB INSULATION
B-2 SETBACKS
B-2 RETAINING WALL
B-2 FOOTINGS
B-4 INTERIOR SHEAR
B-5 INSULATION ENERGY
B-4 HEIGHT VERIFICATION
B-4 FRAMING
B-2 FOUNDATION WALL
F-0 FIRE ADDRESS VISIBLE
A-1 BUILDING PRECON
B-3 PRE ROCK SHAFTS ETC
B-4 DRYWALL FASTENING
F-0 FIRE EXTINGUISH EXITS
X-2 ENGINEERING FINAL
Printed: Friday, June 12, 2020 9:02:49 AM 3 of 3