ENP2021-0055 Water Availability CertificatePERMITTING & DEVELOPMENT
ENGINEERING
DIVISION
121 5th Avenue N
P- 4;>r-771.0:P)A
www.edrnondswa.nov
ITEMS IN THIS BOX TO BE FILLED IN BY APPLICANT
Building Permit - Preliminary Plat or PUD
73 Subdivision - Rezone or Other
Applicant's name:G 0/ L_L� �-
Proposed Use SILO [ 1k
Location (attach map and legal description if necessar ): f /� )W/ �! '
Z�lln 077,/,,-&/
2-of
Gj dared on IW2,12020 ;>,,,; I'd
SECTION C
1. ® a. Water will be provided by service only to an existing 6" Cast Iron
(size) water main that is 30 (feet) from the site.
OR
❑ b. Water service will require an improvement to the water system of:
❑ W. feet of water main to reach the site; and/or
❑ (2). The construction of a distribution system on the site; and/or
❑ (3). Other (describe)
2. ® a. The water system is in conformance with a City approved water comprehensive plan.
OR
❑ b. The water system improvement will require a water comprehensive plan amendment.
(This will cause a delay in permit issuance and approval.)
3. ® a. The proposed project is within the corporate limits of the City, or has been granted
Boundary Review board approval for extension of service outside the City, or is within the City approved
service area of a private water purveyor.
OR
❑ b. Annexation or Boundary Review Board approval will be necessary to provide service.
4. ® a. Water is/or will be available at the rate of flow and duration indicated below at no less than
20 psi - Measured at the nearest fire hydrant 150 feet from the building/property (or as marked on
attached map)
Rate of Flow
❑ Less than 500 gpm. (approximately gpm)
❑ 500 to 999 gPm
❑ 1500 gpm or more
❑ Flow test of 2Dm
❑ Less than one (1) hour
❑ One (1) to two (2) hours
❑ Two (2) hours or more
❑ Other
Duration
❑ Calculation of 2442 gpm (Commercial building permits require flow test or
calculation)
OR
❑ b. Water system is not capable of providing fire flow.
Water Agency Certification
Comments/Conditions:
Per model, static pressure is 92.96 psi
At 1000 gpm, residual pressure is 89.83 psi
At max flow of 2442 gpm, residual pressure is 77.90 psi
I hereby certify that the above information is true. This certification shall be valid for one year from the date of signature.
City of Edmonds
Russell Lynch
(Agency Name)
(Signatory Printed Name
Associate Engineer
(Title)
° (Sin Date)
Form Updated 09/02/2021