BLD2021-0162+Interior_Lighting_Summary+1.28.2021_1.52.22_PM+2017645over
2019
Project Info
Project Title: Dr. Zach Streit
Date 1/1/2018
Compliance
Applicant Information. Provide contact information for individual who can
For SDCI Use
forms do not
respond to inquiries about compliance form information provided.
require a
password to
1.21
Company Name: Obsidian Design, LLC
Company Address: 5921 SE Cedar St.
use.
Instructional and
Applicant Name: Chelsea Rodgers
calculating cells
are write-
protected.
CITY OF
Applicant Phone:
APP 503-539-3657
DEVEL
SERVICES
Applicant Email: obsidiandesignpdx@gmail.com
Project Description I�
0 New Building 0 Addition 0 Alteration 0 No Lighting Scope
Include PROJ-SUM form (included in envelope forms workbook) with lighting compliance forms.
Interior Lighting System
Description
B D2I
0 Interior Lighting Plans Included
Interior Lighting Power
0 Building Area Method 0 Space -by -space Method
Allowance Method
Select method used in project.
Interior Lighting Permit
Q Before January 1, 2018 January 1, 2018 or after
Date
Select date range for the initial building permit application or initial TI permit acceptance
Interior Lighting Controls
0 All C405.2.1- C405.2.8 Lighting Controls 0 C405.2 Exception 5 Luminaire Level
Lighting Control (LLLC)
0 Additional Efficiency Package Option
C406.4 Enhanced Digital Lighting
To comply with C406.4, no less than 90% of the total installed interior lighting power shall comply with
required controls per C406.4.
Dwelling Unit Interior
Permanently installed interior lighting fixtures in dwelling units comply with: 46 No Dwelling
Lighting
0 C405.2 thru C405.5 Commercial Lighting Controls and LPA Units
10 C406.3 High Efficacy Lighting
10 R404.1 Residential High Efficacy Lighting. Dwelling unit lighting complies with SEC Residential
provisions in lieu of SEC Commercial provisions.
Exterior Lighting System
Description
0 Exterior Lighting Plans Included
Building Additions
Compliance Method
Interior lighting
Exterior lighting
Lighting systems in addition area comply with all applicable
0
0
provisions as a stand alone new construction project
Refer to Section C502.2.6 for additional
Lighting systems in addition are combined with existing
0
0
requirements.
building lighting systems to demonstrate compliance
Addition is combined with existing:
For interior lighting projects, include new + existing -to -remain interior lighting fixture wattage in
Proposed Lighting Wattage table in LTG-INT--BLD or LTG-INT-SPACE form.
For exterior lighting projects, include new + existing -to -remain exterior lighting fixture wattage in
Proposed Tradable and Proposed Non -Tradable Lighting Wattage tables in LTG-EXTform.
EIVED
9.21
EDMONDS
JPMENT
)EPARTMENT
021-0162
REVIEWED
BY
CITY OF EDMONDS
over
Project Title: Dr. Zach Streit
Date 1/1/2018
Change of Space Use
0 Existing interior lighting systems in areas under -going a change in space use are upgraded to
comply with LPAs for the new space types per Tables C405.4.2(1) or C405.4.2(2).
Identify interior spaces requiring LPD upgrade to the current Code in Proposed Lighting Wattage
table in LTG-INT-BLD or LTG-INT-SPACE form.
Interior and Exterior
Lighting Power
Interior lighting
Parking garage
Exterior lighting
Spaces with more lighting than
threshold added, altered or replaced
Lighting Alterations
(20% int., 50% garage, 50% ext.)
Spaces with less lighting than
threshold added, altered, or replaced
Select all Lighting Power and Lighting
Control elements that apply to the scope
of the retrofit project. If project includes
(20% int., 50% garage, 50% ext.)
multiple spaces (rooms separated by
ceiling height partitions), each space
where less than 20% of the existing
Lamp and/or ballast replacement only
_ existing total wattage not increased
0
v
0
More lighting than threshold replaced - Total lighting power of new + existing -to -remain fixtures
fixtures are added, altered or replaced
can be combined on a single LTG-INT-
shall comply with total LPA per Sections C405.4.2 and C405.5.2. Include new + existing -to -remain
SPACE form. Spaces where 20% or
fixtures in Proposed Lighting Wattage table in LTG-INT-BLD, LTG-INT-SPACE or LTG-EXT form.
more of the fixtures are added, altered or
replaced and additions maybe combined
onto one lighting power compliance form,
Parking garages and exterior lighting
have 50% thresholds.
Less lighting than threshold replaced - Total lighting power of new + existing -to -remain fixtures
shall not exceed the total lighting power prior to alteration. Include new + existing -to -remain fixtures
in the Proposed Lighting Wattage table in LTG-INT-BLD, LTG-INT-SPACE or LTG-EXT form.
The threshold for interior lighting is 20% of the luminaires within an enclosed space, for parking
garages the threshold is 50% of the luminaires within the garage, and for exterior spaces the
Refer to Section C503.6 for additional
threshold is 50% of the total installed lighting power for the exterior luminaires.
Lighting Controls
Interior lighting
Parking garage
Exterior lighting
requirements.
New wiring installed to serve added
fixtures and/or fixtures relocated to
new circuit(s)
0
0
0
All alteration lighting controls shall be
commissioned per C408.3.
New or moved lighting panel
0
0
0
Interior space is reconfigured -
luminaires unchanged or relocated
0
7-
New wiring or circuit - For interior lighting, provide required manual controls per C405.2.3,
occupancy sensor controls per C405.2.1, daylight responsive controls per C405.2.4 and application
0 No changes are being made to
the interior or exterior lighting
systems and existing space
specific lighting controls per C405.2.5. For exterior lighting, provide required controls per C405.2.7.
New or moved panel - Provide all applicable lighting controls as noted for New Wiring and automatic
time switch controls per C405.2.2.
uses and configuration are not
Reconfigured interior space - Provide all required lighting controls that apply to a new interior
changed.
space. Application specific lighting control provisions per C405.2.5 do not apply to reconfigured
over
Project Title: Dr. Zach Streit
Date 1/1/2018
Calculation
NOTE 9
Area
40 New Construction 0 Addition - 0 Addition
stand alone + existing
o Spaces where < 20% of o Spaces where z 20% of 0 Spaces where the Use
luminaires are replaced luminaires are replaced is changing (C505)
For SDCI Use
LPA
Calculation
Type
Standard Additional Efficiency Package Option
C406.3 Reduced Interior Lighting
To comply with C406.3, the Proposed LPD shall be 25% lower than the Target LPA.
Refer to C406.3 for additional requirements.
User Note
Maximum Allowed Lighting Wattage N1E1
Location (plan #,
room #)
Space Type
Ceiling
Height NOTE 2
Gross Interior
Area in ft2
Allowed
Watts per ftz
Watts Allowed
(watts/fe x area)
100,101
Seating area, general
9' -01,
226
0.390
88
102
Restroom: all other
9' -01,
51
0.700
36
103
Breakroom (see Lounge/breakroom)
9' -01,
70
104
Restroom: all other
9' -01,
53
0.700
37
105
Corridor: all other
9' -01,
285
0.480
137
106
Health care facility: Nurse station
9' -0"
85
0.570
48
107
Health care facility: Imaging room
9' -01,
65
1.060
69
108
Storage room
9' -01,
64
0.450
29
109,110
Health care facility: Exam/treatment
9' -01,
208
1.330
277
111
Health care facility: Exam/treatment
9' -01,
118
1.330
157
112,113
Health care facility: Exam/treatment
9' -01,
194
1.330
258
114
Health care facility: Exam/treatment
9' -01,
121
1.330
161
Total Area 1540
Retail Display Allowance from LTG-INT-DISPLAY
Lobby Art/Exhibit Display Allowancefrom LTG-INT-DISPLAY NOTE 8 Allowed Watts 1297
Proposed Lighting Wattage 11TE3
Location (plan #,
room #)
Fixture Description NOTE 4, 5, 6
Number of
Fixtures
Watts/
Fixture NOTE
1
Watts
Proposed
100,101
led pendant
12
15
180
102
6" led can
2
15
30
103
6" led can
4
15
60
104
6" led can
2
15
30
105
6" led can and LED Pendant
13
15
195
106
6" led can
4
15
60
107
6" led can
2
15
30
108
6" led can
2
15
30
109,110
6" led can
6
15
90
111
6" led can
2
15
30
112,113
6" led can
4
15
60
114
6" led can
4
15
60
Proposed Retail Display Lighting from LTG-INT-DISPLAY
Total Proposed Watts may not exceed Total Allowed Watts for Interior Lighting Total Proposed Watts
1 855
Interior Lighting Power Allowance COMPLIES
Note 1 - List all unique space types per Table C405.4.2(2) that occur in the project scope. Select space type category from drop down menu.
Note 2 - Indicate ceiling height for atriums and spaces utilizing the ceiling height adjustment per Table C405.4.2(2), Footnotes d thru f.
Note 3 - List all proposed lighting fixtures including exempt lighting equipment and existing -to -remain fixtures.
Note 4 - For proposed Fixture Description, indicate fixture type, lamp type (e.g. T-8), number of lamps in the fixture, and ballast type (if included).
For
track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information.
Note 5 - For lighting equipment eligible for exemption per C405.4.1, note exception number and leave Watts/Fixture blank.
Note 6 - Existing -to -remain fixtures shall be included in the Proposed Lighting Wattage table in the same manner as new fixtures. Identify as
existing
in fixture description.
Note 7 - For proposed Watts/Fixture enter the luminaire wattage for installed lamp and ballast using manufacturer or other approved source. For
luminaires with screw -in lamps, enter the manufacturer's listed maximum input wattage of the fixture (not the lamp wattage). For low
voltage
lighting, enter the wattage of the transformer. For line voltage track/busmay systems, enter the larger of the attached luminaire wattage or
50
watts/lineal foot, or enter the wattage limit of permanent current limiting device.
Note 8 - Lobby Art/Exhibit Display Allowance is independent of the Maximum Allowed Lighting Wattage. Enter all proposed lobby art/exhibit display
fixtures in LTG-INT-DISPLAYform only.
Note 9 - Calculation Area Details:
a. Lighting fixtures in a building addition may comply as a stand alone project, or they may be combined with the overall existing building
lighting systems to demonstrate compliance. Refer to C502.1.
b. For alterations and building additions, provide Space Types and gross interior areas in the Maximum Allowed Lighting Wattage table. If
a
building addition will comply as combined with the overall existing building lighting systems, include all applicable existing Space Types
and gross interior areas.