REVIEWED BLD Lighting_Summary1.00 COMP2018 Seattle Enerav Code Compliance Forms for Co rrtre rcial Buildings including R2. R3. R4 over 3 stories and all R1 Revised Mar 2021 rev. 1
Project Info
Project Title: Dusted Valley Tenant Improvement
Date 7/8/2021
Comp/lance
formsdo not
Applicantlnformafion. Provide contactinformaficn for individual who can
respond fo inquiries about compliance form information provided.
For SDCl lJse
requ/rea
password to
Company Name: Rhema 9ectric LLC
Company Address: 67g g, gpruce 3t, Burlington, WA 98233
use. lnslruc tima�
and calculating
ce/Js are write-
pnofecfed.
Applicant Name: Randy Merritt
Applicant Phone: t308-292-3901
Applicant Erreil: randy�rhe maelectric.com
Project Description
� New Building Q Addition �AHeration �No Lighting Scope
Include PROD -SUM form (included in envelope forms vror'kbookJ with lighh'ng compliance forms.
Interior Lighting System
LED Lighting
Description
Briefiydescribe inferiorlighting system
type and features.
OInteriorLighting PlansIncluded
Interior Lighting Power
0 Building Area Method 0 Space -by -space Method
Allowance Method
Selectmethod used In prq'ecf.
Interior Lighting Controls
0 All C405.2, Item) L'g hting Controls CR05 2 Item 2 Lu minaire Level Lighting
0 Control (LLLC)
Selecfintariorlighting control types
O Additional 6ficiency Package Option
C406.4 Enhanced Digital Lighting Controls
Tocomplyvvi th C406.4, no less than 90% of the total installedlnterior
lighting powershall comply with the requiredcontrols per C406.4.
Sleeping /Dwelling Unit
Area of muRiFamiy dw elling units complying w ith C405.1.1 and C405.7 N/A
Interior Lighting
Area of all other dwelling and sleeping units complying w kth C405.1.1 and C405.2.5 N/A
Area of all other dw elling and sleeping units complying w ith C405.5 and CA05.2.5 N/A
Exterior Lighting System
N/A
Description
Briefiydescribe ex teriorlightingSystem
type and features.
Exterior Lighting Plans Included
Building Additions
Compliance Method
Interior lighting
C terior lighting
Refer to Section C502.2.6 for addr tional
requirements.
Lighting systerrs in add'Rion area comply w ith all applicable
provisions as a stand alone new construction project
I�
Lighting systems in addition are combined w ith existing
building lighting systems to derrnnstrate compliance
o
0
Adtl/tlon/scomb/nedwlth eadst/ng:
For interiorlighting projects, irirlude new+existing-to-remain interrorlighting fix Lure watfagein
Proposed U'ghfing Wattage fable in LTG-1NT-BLD or LTG-lNT-SPACEform.
For exterior I fig hung projects, include new+ ex fisting-fo-remain ex terior lighting fixture wattage in
Proposed Tradableand Proposed Non -Tradable Lighh'ng Waite<oa tab/es in LTG-EXT Form.
• •
•
Project Title: Dusted Valley Tenant Improvement Date 7/8/2021
Change of Space Use
O 6cisting interior lighting systerru in areas under-goinga change in space useare upgraded to
comply w ith LPAs forthe new space types per Tables C405.4.2(1) or C405.4.2(2).
Identifyinterior spaces requiring LPD upgrade fo the currant Codein Proposed Lighting Watfaga table in
LTG-INT-BLD or LTG-INT-SPACE form.
Interior and Exterior
Lighting Power
Interior IigMing
Parking garage
Exterior lighting
Llghllrig Alterations
Spaces w ith more lighting than thres hot
added, altered or replaced
o
0
0
(20 % int., 20 % garage, 20 % ext.)
Spaces w ith less lighting than threshold
Select a/I Lighfirrg Fbwar and Lighhng
Control elements thatapplyfo fhascope
added, atered, or replaced
o
0
0
of the retrofitprojecl./fprojectincludes
(20% int., 20% garage, 20% ext.)
m ultiplespaces (rooms separatedby
Lamp and/or ballast replacement only -
ceilingheightparfi lions), each space
existingtotalwattagenotincreased
I�
�
I�
where less than 20% of the existing
More!/ghting than threshold replaced-Tote/lighting power ofnew+existing-to-remain fix lures shall
fix Lures are added, altered or replacedcan
be combined onasingle LTG-INT-SPACE
complywi th tofalLPA per Sections C405.4.2and C405.5.3. !ncludenew+existing-to-remain fix turns in
form. Spaces where 20% or more of the
Proposed L/ghfing Wattage tablein LTG-INT-BLD, LTG-INT-SPACEorLTG-EXTform.
fixtures are added, altered or replaced and
additions maybe combined onto one
Lem/ighting than thresho/d rep/aced-Tafa!lighting povier ofnew+existing-to-remain fix turesshal!
lighhng pownrcomp/lance form. Parking
not ax ceeo'fhe total lighting power prior to alteration. include paw+ex isfing-fo-remain fixturesin fha
garages and ex terior lighting also ha ve
ProposedL.lghfing Wattage tab/ein LTG-INT-BLD,LTG-INT-SPACEorLTG-EXTform.
20 % thresholds.
The threshol d for inlerror lighting is 20% of the 1 uminaires wfthi n an enclosed space, for parking garages
the fhreshdd is 20% of the /um /noires within the garage, and for ex terlorspaces the threshold is 20 % of
Refer to Section C503.6 for additions!
fha total insfalfedlighting povwsr for the ex terior luminaires.
raquiramanfs.
Lighting Controls
Interior lighting
Parking garage
Exterior lighting
Altalferafion lighlingconfro/s she//be
New wiring installedto serve added
commissioned per C408.3.
fbctu res and/or fixtures relocated to new
0
0
0
circud(s)
New or moved lighting panel
0
0
0
Interior space is reconfigured -
luminaires unchangedorrelocatedonly
I�
New wi ring or ci n:uit-For /nterior lighting, provide required manna/confro/s per C405.2.3, occupancy
sensor contrds par C405.2. 1, daylight raspor>,srva controls per C405.2.4 and application s pacific lighting
No changesare beingmade to
controls per C405.2.5. For ex feriorlighting, provide requ/redcontrols per C405.2.6.
l� the/nteriororexterior/ighting
New or moved pane/-Provideal/applicablelighting controls as noted for New Wiring and automatic
systems and exiling space
Hmeswifch controls per C405.2.2.
uses and configurationare not
Reconf/guredinteriorspa ce-Provide aH required/ighting contrdsthatapply Loa new interiorspace.
changed.
Application specific lighfir7g control provisions per C405.2.5 do not apply fo reconfigured spaces.
2D18 Seattle Enerav Code Coriroliance Forms for Commercial Buildings including R2. R3. R4 over 3 stories and all R1 Revised Mar 2021 rev. 1
Project Title:
Dusted Valley Tenantlmprovement
Date
7/8/2021
Calcillatlon
� New Construction � Addition -
� Add'Rion � pear
For SDCI Use
A r.,,a NOTE 9
rilC
stand alone
+existing
� Spaces w here <20% of � Spaces w here? 20% of
� Spaces w here the Use is
luminaires are replaced luminaires are replaced
changing (C505)
LPA
� Standard [] C4D6.3.1 Reduced LPA 10% Q C4D6.3.2 Reduced LPA 20%
Calculation
p clear
User Note
Tocomplyviath C406.3.9 or C406.3.2, the ProposedLPD shag be 10% or
Type
20%lower respectirefythan the TargetLPA. Refer to C406.3 foradditionalrequirements
Maximum Allowed
Lighting Wattage NOTE 1
Location (plan #,
Gross Interior
Albwed
Watts Albwed
room#)
Space Type
'
Area in ftz
Watts per ft2
(watts/ft2 x area)
E2.00
Dining area: family dining area
1341
0 .540
729
E2.00
Food pr�aration
354
0.980
347
E2.00
Restroomx all other
168
0 .570
96
E2.00
Corridor. all other
55
0 .370
20
F2.00
Storage room 50 - 100 ft2
9 6
0 .34 0
3 3
Total Area 2014
Retail Display Allowance from LTG-INT-DISPLAY
Art/Display/6chi6itlOrnamental6dra Lighting fromLTG-INT-DISPLAYNOTEs�
Allowed Watts
1220
Proposed Lighting Wattage NOTE3
Location (plan #,
rOOm#)
FIX1Ure DeSCflptlOn NOTE 4, 5,6
Numlber of
FIXtUreS
Wattsy
FIXture NOTE?
Watts
proposed
E2.00
NORA NTE-86010W LED, Eft track per 4 factures
60
10
600
E2.00
Funga E24916-BKSBR, LED
13
12
156
E2.00
NORA HN101CD-48 LED, 10001m
14
14
196
E2.00
Rejunvenation A1750, Wall Sconce, Socket
2
15
30
E2.00
Rejunvenation A0367, Flush Mount Conifer, Socket
2
15
30
E2.00
Rejunvenation A0367, 4" Flush Mount, Socket
1
19
19
E2.00
NORA NELOCAG6 LED
1
24
24
Proposed Retail Display Lighting from LTG-INT-DISPLAY
Total Proposed WattsmaynotexceedTotalAilot4edWattsforinteriorLighting TotalRoposed Watts
1055
Interior Lighting Power Allowance COMPLIES WITH C406.3.1
.. -- -.
2018 Seattle Energy Code Compliance Forms for Commercial Buildings including R2, R3, R4 a✓ar 3 stories and all R1 I�vised Mar 2021 rev. 1
Project Title: Dusted ValleyTenantlmprovement rote 7/8/2021
The fdlow ing information is necessarytocheckapermit application forconpliancew ith the lighting, motor, and electricalrequirements in the
Washington State Energy Code, Commercial Provisions.
Applicability
Location in
{yes,no,na)
Code Section
Component
Compliance information required in permit documents
Documents
SDCI Notes
LIGHTING CONTROLS
C405.2
Lighting controls,
For all lighting systems, indicate lighting control method on
NA
general
plans far spaces and lighting zones) served, or exception
taken
�
C405.2
LLLC required for
Far open office areas larger than 5000 sf, provide LLLC
open office
fixtures or enhanced digital lighting control system
CA05.2,
Lunindre level
Indicate on plans all fhchires provided w Rh LLLCcomplying
NA
Option 2
lighting controls
with C405.2 option 2 lighting controls; provide description of
(LLLC)
control capabilities andperfarmanceparameters
C405.2.5 Rem
Lighting in dwelling
Indicate method of automatic control of all installed lurrinaires in
�
3
units (dormitory,
dwelling units in buildings other than multifamily (occupancy or
C405.2.1.1
hotel and all other
light reduction controls)
C405.2.3.1
than multifamily)
C405.2.5 dam
Lighting in sleeping
Indicate method of automatic off control of all installed
NA
2
units
luminaires in sleeping units (vacancy or key card control); also
refer to Receptacles
C405.2.3
rv�nual controls
Indicate on plans the method of mtenual lighting control, location
Yes
C405.2.3.1
of manual contrd device and the area or specific application it
E2.00
C405.2.5
serves
C405.2.1.1
Manual interior light
Indicate on plans w hich method of rranual 50°h lighting load
NA
C405.2.3.1
reduction controls
reduction is provided, or indicate applicable exception
C405.2.4
CA05.2.1
Method of automatic
Indicate on plans the method of automatic shut-off contrd
�
C405.2.2.1
shut-off control
during unoccupied periods (occupancy sensor, time sw itch or
C405.2.1,
digital timer sw itch) far all lighting zones;
Exception 3
Indicate on plans all luminaires that are contrdled by occupant
sensor contrds; indicate contrds are configured to turn
Q.00
C405.2.1
Occupancy sensor
luminaires 10D% off when the space is unoccupied;
Indicate'rf occupant sensor controls are configured to be
Yes
Cyr 21.1
controls
manual on or automatic on to not more than 50°� pax er;
indicate spaces eligible for exception that allax s automatic on
to 100 %power
C405.2.1.2
Occupant sensor
Indicate each aislew ay and corridor w Rhin a w arehouse
N4
controls -
space are designated as separate zones that are
w arehouses spaces
independently controlled
CA05.2.1.2
Occupant sensor
Indicate occupant sensors are configured to automabcaly
controls -
reduce lighting pow er by 50 % w itllin 20 ntinutes of all
w arehouse spaces,
occupants leaving the zone; indicate controls are configured
NFL,
storage areas and
to automatically restore full pow er w hen the zone is occupied;
service corridors
indicate occupant sensors turn lighting off w ithin 20 minutes of
all occupants leaving the space, or time sw itch contrds
provided
C405.2.1.3
Occupant sensor
Far open plan office areas larger than 300 sf, indicate general
controls -open plan
lighting is provided w Rh vacancy controls that reduce lighting
WA
office areas
pav er by not less than 80%and are configured to tam
luminaires 100% off when the opal plan office area is
unoccupied; indicate that no individual control zone area
C405.2.1.4
Occupant sensor
Indicate parking garage general lighting is provided w ith
controls -parking
vacancy controls to automatically reduce lighting pow er by not
�
garages
less than 30%within 20 minutes of no activity being detected;
indicate that no control zone exceeds 3,600 sf; indicate
occupancy sensors turn lighting off w ithin 20 minutes of
space vacancy, or time switch controls provided
C405.2.1.5
Occupant sensor
Indicate stairw ay lighting is provided w ith vacancy controls
NA
controls -enclosed
that reduce lighting pow er by not less then 50°� w hen the
fire -rated stainv ells
stairvr ay in unoccupied
Indicate spaces on plans w here time sw itch contrds turn
luminaires 100% off during unoccupied hours
Indicate locations w here automatic shutoff is provided by
other methods (occupancy sensor or digital timer sw itch) or
Automatic time
which time sw itch control exception applies
NA
C405.2.2.1
sw Rch controls
Indicate spaces on plans w here time sw itch contrds are
configured to turn a1 lighting to full pow er versus 50 %power
Indicate locations of override sw Rches on plans and the
lighting zones) served; indicate thatthe area{s) saved by
each override sw itch does not exceeds 5,000 sf
�
C405.2.1,
Dgital timer sw itch
Indicate digital timer switch contrd includes: manual on/off,
Exception 3
time delay, audible and visual indication oT impending time-out
Indicate primary and secondary sidelR daylight zone floor
areas on plans;
Indicate toplR daylight zone floor areas on plans;
C405.2.4.2
Daylight zones -
Far small vertical fenestration assemblies (rough opening less
�
C405.2.4.3
Sidelit and toplit
than 1 D percent of primary daylight zone floor area) w here
daylight responsive controls are not required, provide
fenestration azea to daylight zonefloor azea calculations)
fa fa • • fa ' •
2018 Seattle Energy Code Compliance Forms for Cbmmiercial Buildings including R2, R3, R4 over 3 stories and all R7 Revised Mar 2021 rev. 1
Roject Title: Dusted Valley Tenant Impravem en[ Date 7/8/2021
The follow ing information is necessary to check a
permit application for compliance w Rh the ighting, motor, and electrical requirements in the
Washington State Energy Code, Commercial Rovisions.
Applicability
Location in
(yes,no,na)
Code Section
Component
Compliance information required in permit documents
Documents
#REF.
Indicate on plans lighting zones) served by daylight
responsive controls; indicate that the area served by each
control device does nd exceeds 2,500 sf;
Identify Sidelit and toplt daylight zones that are not provided
NA
C405 2 4
Daylight responsive
w th daylight sensng controls and the exceptions) that apply;
controls
Indicate an plans the lighting load reduction method
(continuous dimming, or stepped dimming that provides at least
tw o even steps between 0%-100% of rated power);
Indicate that daylight senshg controls are configured to
completely shut off all controlled lights in the ighting zone
Additional controls -
Identify spaces and lighting fixtures on plans that require
NA
C405.2.5
Specrfic application
specific application lighting controls per this sectbn
lighting controls
Indicate on plans that rrenual controls are provided that control
display, accent lighting and display case ighting hdependently
�
C405.2.5 -
Display and accent
from bdh general area lighting and other lighting applications
Hem 1
lighting
w thin the same space;
Indicate manual and automatic (occupant sensor or time
sw tch) lighting control methods
C405.2.5 -
Hotel/motel guest
Indicate method of automatic control -vacancy or capbve key
NA
Item 2
rooms
control of all installed luminaires and switched receptacles in
guest room
Indicate method and location aF manual and automatic shut-off
�
C405.2.5 -
Supplemental task
control (occupant sensor or time switch) for supplemental task
Item 1
lighting
lighting, including under -shelf or under-cabind lighting
Indicate on plans that lighting equipment far sale or
demonstration are controlled independently from both general
�
C405.2.5 -
Supplemental task
area lighting and other lighting applications wtihin the same
Nem 1
lighting
space;
Indicate manual and automatic (occupant sensor or time
switch) lighting control methods
Identify all eligible non -visual lighting applications on plans;
indicate that the area served by each control device does nd
exceeds 4,000 sf;
C405.2.5 -
Lighting for non-
Indicate on plans that non -visual lighting are controlled
�
Item 4
visual applications
independently from both general area IigMing and other lightng
applications w thin the same space;
Indicate method of manual lighting control and applicable
automatic lighting control
Identify on plans egress fixtures that function as both normal
� �
and emergency means of egress illumination;
Rovide calculation of ighfng power density of trial egress
C405.2.5 -
Means of egress
lighting operating 24rT and demonstrate that is is equal to or
�
Hem 5
lighting
less than 0.01 V�dfR;
Indicate method of automatic shut-off control
For decorative exterior lighting, indicate on plans automatic
daylight shut-off contrds, or exception taken
For exterior lighting that is not decorative, indicate on plans
Exterior IigMing
automatic daylight or time-sw ttch shut-off controls and
NA
C405.2.8
controls
setback contrds; or indicate exception taken
For lighting requiring setback controls, include cmtrol
sequence that reduces lighting pow er by at least 30%
between 72amr8am, or from 1 hour after closing to 1 hour
before opening, or based upon motion sensor
Exterior IigMing
For building facade and landscape lighting, indicate control
controls -Building
sequence for shut-off control is based on dow n-to-dusk and
NA
C405.2.6
facade and
business openinglclosing schedule; indicate w hether
landscape
automatic or time sw rich controls w ill be provided for this
function
NA
C405.5.4
Exterior gas -fired
Indicate ignition system is a method other then continuously
lighting appliances
burning pill light
Area contrds -
Indicate locations) of master control sty itches) intended to
Master control
control multiple independent switches; circuit breaker may not
C405.2.7
sty lobes and circuit
be used as a master control sty itch;
Verify that no single switch controls more than one 2o-amp
power limd
circuit, loaded to maximum 80%capacity
ADDITIONAL EFFICIENCY PACKAGE OPTION -ENHANCED DIGITAL LIGHTING CONTROLS
To comply w Rh additional efficiency credt, indicate on plans
that interior IigMing fixtures are configured with all of the
following control functions, as applicable: l) Each fixture is
individually addressed, or exception taken; 2) Factures are
contigured for continuous dimming; 3) No more than eight
fbctures are contrdled by a single daylight sensor; 4) h
�
��'4
Enhanced digital
enclosed and open office areas, illumination levels of
lighting controls
overhead general area lighting is configured to be individually
adjusted by occupants;
Include calculations that demonstrate the total lighting paw er of
all interior lighting futures configured with enhanced lighting
controls is no less than 90% of the total interior lighting power
far the area the enhanced lighting controls credit is being
applied to
.. - -- - -.
2018 Seattle Energy Code Compliance Forms for Commercial Buildings including R2, R3, R4 over 3 sthries and all R1 Revised Mar 202d rev. 1
Project Title: Dusted ValleyTenantlmprovement Dale 7/8/2021
The folbw ing intormatbn is necessary to checka permit application for corrpliancew Rhthe lighting, motor, and electricalrequirements inthe
Washington State Energy Code, Commercial Provisions.
Applicability
Location in
(yes,no,na}
Code Section
Component
Compliance information required in permit documents
�cuments
SDCI Notes
INTERIOR LIGHTING POWER 8 EFFICACY
Include all luminaires in interior IigMing focture schedule;
indicate fbcture types, lamps, balasts, and manufacturer's
watts per fixture for the installed lamp;
C405.4.1
Total connected
kientrfy spaces eligible for lighting pow er exemption on plans
Yes
C405.4.2
interior lighting
and in S� inferior lighting compliance reports; indicate the
E1.00
poy,, er
exception applied;
kientify lighting equipment eligible for IigMing power exempton
in focture schedule and in SCE interior lighting compliance
reports; indicate the exception applied;
Total connec�d
Indicate on plans any areas w here proposed wattage s
NA
C405.4.1
interor lighting
calculated as the total dedicated lighting branch wattage; detail
pow er alternative
rated wattage and proposed lighting power for each branch
For all installed luminaires, include lamp type and number of
�
C405.1
Lighting in dwelling
lamps in lighting focture schedule; for lamps that are not L®, T-
C405.1.1
units (multifamily)
8 or small diamethr fluorescent, indicate effbacy of other lamp
types is 65 lumens per w att or greater
Lighting in dwelling
For all installed luminaires, indicate in lighting focture schedule
�
C405.1
units (dormitory,
whether complying via lighting power density or by qualifying
C405.1.1
hotel and all other
lamp type; 'if try lamp type, include number of lamps
than muRRarrily)
C405.1
Lighting in sleeping
For all installed luminaires, indicate in IigMing focture schedule
�
C405.1.1
units
whether complying via lighting power densty or by qualifying
lamptype; R by lamp type, include number of lamps
Interior Lighting Power Calculation -Indicate compliance path taken
Demonstrate that total proposed w attage per building area
NA
C405.4.2.1
Building Area Method
does not exceed maximum allowed wattage per building area;
identify bcations of building areas on plans; provide S�
exterior lighting compliance reports
Demonstrate that total proposed w attage does not exceed
Space -By -Space
�ximumallowedwattage; idenfrfy bcations of spaceiypes
Yes
C405.4.2.2
Method
on plans, including retail display areas and areas with display,
E100
highlight and decorative lighting; provide S� exterior lighting
compliance reports
ADDITIONAL EFFICIENCY PACKAGE OPTION -REDUCED INTERIOR LIGHTING POWER DENSITY
To comply w Rh additional efficiency credR, demonstrate that
total connected inferior IigMing wattage is 70% or 20% less
C406.3.1
Reducedin�rior
than the total maximum allowedlightingwattageforthearea
Yes
C406.3.2
lighting power
the reduced lighting power credR is being applied to; indicate
E1.00
density
whether lighting poweralbwanceisbasedonthebuilding
area method or space -by -space method; provide SEC exterior
lighting compliance reports
For project w Rh dwelling units, to corrpy w ith addtional
Reduced interior
efficiency credR indicate in lighting focture schedule that lamps
NA
C4D6.3
lighting power
within installed interior luminaires have an efficacy rating of at
density -dwelling
least 65 lumens per watt; include number of lamps and provide
unR lamp efficacy
calculations that demonstrate at least 95°h of lamps have this
efficacy rating
EXTERIOR LIGHTING POWER &EFFICACY
Include all luminaires in exterior lighting focture schedule;
indicate fbcture types, lamps, ballasts, and manufacturer's
watts per focture for the installed Tamp;
kdentify exteror applications eligible for lighting power
Total connected
NA
C405.5.2
exterior IigMing
exemption on plans and in S�exterbr lighting compliance
reports; indicate exception applied;
power
Indicate that exempt exterior Ighting and lighting located within
exterior areaslsurtaces that eligible for a lighting power
exemption are controlled independently from non-exempt
exterior lighting;
C405.5.3(d)
Exterior IigMing zone
Indicate building exterior lighting zone as spec'rfied by the AHJ
Exterior building
For building grounds foctures rated at greater than 50 watts,
NA
C405.5.1
grounds lighting
indicate rated lamp efficacy (in lumens per watt) in fbcture
schedule
klentify bcations of tradable and non -tradeable surtaces on
NA
C405.5.3
Exterior lighting
po,/,/ er calculations
plans
Complete required compliance form- proposed w attage for
exterior IigMing plus base site allowed does not exceed
max imam allowed
For open parkirllj, outdoor area, and roadway luminaires
NA
C405.5.5
Full cutoff luminaires
mounted more than 15 feet above the ground, indicate fixture
with zero candela at an angle of 90 degrees.
2018 Seattle Energy Code Compliance Forms for Commercial Buildings including R2, R3, R4 over 3 stories and all R1 Rev'sed Mar 2021 rev. 1
Project Title: Dusted Valley Tenant Improvement Date 7/8/2021
The follow ing information is necessary to checka permit application for compliance w iU1 the Ighting, motor, and electrbal requirements in the
Washington State Energy Code, Commercial Rovisions.
Applicability
Location in
(yes,no,na)
Code Section
Component
Compliance information required in permit documents
Documents
SDCI Notes
LIGHTING ALTERATIONS
Where �20% of existing luminaires in an interior space or
parking garage are replaced; indicate compliance path (building
area orspace-by-space method); include all new and exsting-
Uo-remain luminaires in SEC interbr lighting compliance reports;
indicate proposed lighting wattage does not exceed maximum
Interior and parking
allowed per compliance path
NA
C503.6.1
garage lighting
Where < 20 % of existing luminaires in an interor space or
focture aterations
parking garage are replaced; indicate total ex'sting lighting
wattage in each space pion to albration; include all new and
existing -to -remain luminaires in S� interior IigMing compliance
reports; indicate proposed total lighting w attage in adoration
area does not exceed total existinglightingwattagepriorhl
adoration
Where >_ 20 % of existing exterior fighting wattage is replaced;
include all new and existing -to -remain luminaires in S�
exterior lighting compliance reports; indicate proposed total
exterior lighting wattage does not exceed maximum allowed
NA
C503.6.1
Exterior lighting
focture aterations
Where < 2D % of existing exterior lighting wattage is replaced;
indicate total existing lighting w attage prior to al�ratbn; include
all new and existing -to- re main luminaires in SEC interior
exterior compliance reports; indicate pro posed totalexterbr
lighting w attage does not exceed total exsting w attage pion to
adoration
Where new W Ifing IS installed t0 SBNe neW Into rlOr Urillnalre5
and Jor luminaires are relocated to a new circuit indicate
NA
C503.6.2
Interior IigMing w iring
manual and automatic lighting controls are provided (as
alterations
applicable) - manual (C405.2.3); occupancy sensor
(C405.2.1); IigM reduction (C405.2.3); daylght responsive
(C405.2.4); Specrfic application (C405.2.5);
Exterior lighting
Where new w iring is installed th serve new exteror luminaires
NA
C503.6.2
�y iring aterations
and /or luminaires are relocated to a new circuit; indicate
automatic lighting controls are provided (C405.2.6)
Where a new interor and/or exteror lighting panel b installed
NA
C503.6.3
Lighting panel
or an ex'sting panel is moved (all new raceway and conductor
alterations
wiring), indicate all applicable Ighting controls requirements
apply
Where interior spaces) is reconfigured (permanenty installed
NA
C503.6.4
�''ry-created
walls or ceiling -height partitions) to create new encosed
rooms
spaces, indicate all applicable lighting controls requirements
appy
Identify spaces on plans w here the building area type or
space use type is being changed from one type to another per
Tables C405.4.2(1) or (2)
Indicate compfance method (building area orspace-by-space);
Change of interior
NA
C505.1
space use
include all new and existing -to -remain luminaires in SEC ulterior
lighting compliance reports; indicate proposed lighting wattage
does not exceed maximum allowed per compliance path
Indicate lighting controls provided per C405.2
RECEPTACLES
identify all controlled and uncontrolled receptacles on electrical
plans in each space in w hich they are required; include
receptacle configuration such as spacing betty eon controlled
and uncontrolled, duplex devices, etc;
Provide schedule that lists the number of controlled and
Controlled
uncontrolled receptacles in each space w here controlled
NA
C405.10
receptacles
receptacles are required- classrooms, private offices, open
office areas, conference rooms, copy rooms, break rooms
and modular parffiionsiworkstations
Indicate on plans the method of automatic control for each
controlled receptacle zone (occupant sensor or programmable
time -of -day control); indicate that each zone served by a
single controller does not exceed 5,D00 sf;
C405.2.5
Sw itched
Indicate method of automatic off control of all sty itched
NA
Item 2
receptacles in
receptacles in sleeping units (vacancy or key card control}
sleeping units
Where new receptacles are added or replaced w Rhin an
NA
C503.6.6
Dectrbal receptacle
adoration project that is 5,000 sf or larger, indicate new or
aleratbns
altered receptacles are provided w Rh automatic controls per
C405.10, or excepton taken
.. � -- -�
2018 Seattle Energy Cade Compliance Forms for Commercial Buildings including R2, R3, R4 over 3 stories and all R1 Revised Mar 2021 rev. 1
Project Title: Dusted Valley Tenant Improvement Date 7/8/2021
The follow ing information is necessary to checka permit application for compliance w iththe lighting, motor, and electrical requirerrents in the
Washington State Energy Code, Comrercial Rovisions.
Applicability
Location in
(yes,no,na)
Code Section
Component
Compliance information required in permit documents
Documents
SDCI Notes
MOTORS, TRANSFORMERS, ELECTRIC METERS, INTERIOR TRANSPORTATION
NA
C4D5.6
9ectrical
Include electrical transforrrer schedule on electrical plans;
transformers
indicate transforrrer type, size, efficiency, or exception taken
Feeders and branch
Rovide documntation that demonstrates rrtaximumvoRage
NA
C405.11
circuits
drop across feeders and branch circuits does not exceed 5°�
Dwelling unit
Indicate on electrical plans that each dwelling unit in Group R-2
NA
C4D5.7
electrical energy
has a separate electrical energy rreter
consumption
NA
C405.7.1
Receptacles at gas
Rovide 240/208 volt receptacle at each gas appliance
appliances
eectric motor
Include all rrotors, including fractional hp motors, in electric
NA
C405.8
efficiency
rrbtor schedule on electrical plans; indicate rrotor type,
horsepower, rprrt rated efficiency, or exception applied
For luminaires in each elevator cab, provide calculations that
demonstrate average efficacy is not less than 35 Iumens/W;
Indicate rated w atts per cfmfor elevator cab ventilation fans
NA
C4D5.9.1
9evator cabs
do not exceed 0.33 watts per cfm;
Indicate autorretic controls that de -energize lighting and
ventilation fans w hen elevator is stopped and unoccupied for
a period of 15 minutes or more
Indicate escalators comply w ith ASMEA17.1yCSA 1344;
NA
C405 9 2
Escalators and
automatic controls are configured to reduce operational speed
moving w elks
to the minimum permitted w hen not in use or uses a variable
voltage drive system
NA
C405.9.3
Regenerative drive
Indicate all one-w ay dow n or reversible escalators are
provided w ith a variable frequency regenerative drive
DOCUMENTATION AND SYSTEM REQUIREMENTS TO SUPPORT COMMISSIONING (Cx]
Indicate that controlled receptacles are required to be
commissioned
Scope of electrical
Where total building lighting load is > 2D kW, or w here total
NA
C408.4
power and lighting
lighting load of luminaires requiring daylight sensing and / or
systems
occupancy control > 10 kW, indicate that all automatic lighting
comrissioning
control systems are required to be commissioned; or provide
building lighting power calculation derronstrating eligibility for
exception;
Indicate Cac requirerrants in plans and specifications for all
applicable electrical and lighting control systems per C408;
Include general summary of Qc plan per C408.1.2 including: 1)
C405.13
Commissioning
Narrative description of activities; 2) Responsibilities of the G�c
C408.1.1
requirements in
team; 3) Schedule of activities including verrfication of project
NA
C4081 2
construction
close out documentation per C1D3.6; 4) Conflict of interest plan
C408.1.4
docurrents
(if required);
Include in general sumTary that a Oc project report and
C103.6
Compliance Checklist (Figure C408.1.4.1) shall be completed
by the Certrfied Cx Rofessional and provided to the owner
prior to the final electrical inspection
Functional
IderitiFy in plans and specifications the intended operation of all
NA
CA08.4.1
pertorlTiance testing
equiprrent and controls during all modes of operation, including
criteria
interfacing between new and existing -to -remain systems
PROJECT CLOSE OUT DOCUMENTATION
Indicate in plans that project close out documentation is
Roject close out
required including SEC lighting compliance forms and
NA
C103.6.3
docurrentation
calculations that docurrent all interior and exterior lighting area
requirements
and J or surface types, lighting pow er allow ances and
installed densities
-" Rhema
�:,
d
��ut
Residential •Commercial •Industrial
"THE WORD OF GOD IS LIVING AND ACTIVE.. " (HER 4:Iz)
(360) 416 - 8227 www.RhemaElectric.com
628 5. Spruce Street Burlington, WA 98233
PROJECT:
Dusted Valley
Tenant Improvement
LOCATION:
201 Main Street # 102
Edmonds, WA 98020
PREPARED FOR:
Edmonds 2020 LLC
KEY MAP
DATE REVISION
PROJECT TEAM MEMBER
dmo
CHECK
ELECTRICAL
PLAN
nnE
LUMINAIRE, &LIGHTING
CODE COMPLIANCE
PROJECT N0.
21026.00
DATE
J U LY 07, 2021
PROJECT NETWORK PATH
SHEET NUMBER