REVIEWED FIR2022-0106+Fire_Sprinkler_Equipment_Specification_Sheets+10.10.2022_1.17.25_PM+3155591Bulletin 006 June 2021
Relmlabld
Features
cULus Listed as Residential Sprinklers
Push -On cover plate installation
Low water flow requirements
Product Description
Model RFC Series residential sprinklers are flat cover plate,
concealed pendent sprinklers intended for installation in
accordance with NFPA 13, NFPA 13R, or NFPA 13D. The
sprinklers are cULus Listed as Residential Sprinklers in
accordance with UL 199. In addition, Model RFCLL Series
sprinklers are cULus Certified for Health Effects to NSF/ANSI
standard 61 Annex G (LL) and Australian WaterMark Certified
(WMCS).
Model RFC30 sprinklers have a 165°F (74°C) temperature
rated fusible -link operating element. Model RFC43, RFC49,
RFC58, and RFC76 sprinklers are offered with either a 165°F
(74°C) or 212°F (100°C) temperature rated fusible -link
operating element. Sprinklers with a 165°F (74°C) temperature
rating are ordinary temperature classification and are listed
for use with a 135°F (57°C) temperature rated cover plate.
Sprinklers with a 212°F (100°C) temperature rating are
intermediate temperature classification and are listed for use
with a 165°F (74°C) temperature rated cover plate.
Model RFC Series sprinklers are installed with a Model G5
cover plate. Model G5 cover plates are installed by pushing the
cover plate into the cup and turning in the clockwise direction
until it is tight against the ceiling. Model RFC30, RFC30LL,
RFC43, RFC43LL, RFC49 and RFC49LL sprinklers allow 1/2"
(13 mm) of cover plate adjustment. Model RFC58 and RFC76
sprinklers allow 3/4" (19 mm) of cover plate adjustment. Model
G5 cover plates are available in a variety of finishes as listed in
Table H.
Model RFC Series Residential Sprinklers
Flat Concealed Pendent
RECEIVED
Oct 11 2022
CITY OF EDMONDS
DEVELOPMENT SERVICES
DEPARTMENT
Model RFC30 & RFC30LL
Model RFC49 & RFC49LL
Model RFC76
cULus Listed
FI R2022-0106
Model RFC43 & RFC43LL
Model RFC58
'Am
Model G5 Cover Plate
Sprinkler Model
p
Nominal K-Factor
gpm/psi'l2 (I/min/bar'12)
Max. Coverage Area
ft x ft (m x m)
Listings &
Approvals
Sprinkler Identification
Number (SIN)
RFC30
3.0(43)
14 x 14 (4.3 x 4.3)
cULus
RA0611
RFC30LL
3.0(43)
14 x 14 (4.3 x 4.3)
cULus, LL, WMCS
RA3211
RFC43
4.3(62)
20 x 20 (6.1 x 6.1)
cULus
RA0612
RFC43LL
4.3(62)
20 x 20 (6.1 x 6.1)
cULus, LL, WMCS
RA3212
RFC49
4.9(71)
20 x 20 (6.1 x 6.1)
cULus
RA0616
RFC49LL
4.9(71)
20 x 20 (6.1 x 6.1)
cULus, LL, WMCS
RA3216
RFC58
5.8(84)
20 x 20 (6.1 x 6.1)
cULus
RA0613
RFC76
7.6(109)
20 x 20 (6.1 x 6.1)
WILLS
RA0618
cULus: CULLS Listed to UL199, Automatic Sprinklers for Fire -Protection Service.
LL: CULLS Certified for Health Effects to NSF/ANSI Standard 61 Annex G (Less than 0.25% Lead content).
WMCS: Australian WaterMark Certified.
www.reliablesprinkler.com
Technical Specifications
Style: Flat Concealed Pendent
Threads: 1/2" NPT or ISO 7-1R1/2
Nominal K-Factor: 3.0 (43 metric)
Max. Working Pressure: 175 psi (12 bar)
Min. Spacing: 8 ft. (2.4 m)
Material Specifications
Thermal Sensor: Nickel Alloy Solder Link
Sprinkler Body: Brass Alloy
Levers: Bronze Alloy
Yoke: Brass Alloy
Sealing Assembly: Nickel Alloy with PTFE
Load Screw: Bronze Alloy
Towers: Copper Alloy
Pins: Stainless Steel
Deflector: Bronze Alloy
Cup: Steel
Cover Plate Finishes
(See Table H)
Sensitivity
Fast -response
Temperature Rating
Ordinary:
165°F (74°C) sprinkler
135°F (57°C) cover plate
Intermediate:
212°F (100°C) sprinkler
165°F (74°C) cover plate
Cover Plate
Model G5 Cover Plate
Sprinkler Wrench
Model FC (without wrench -able cap)
Model W3 (with wrench -able cap)
Listings and Approvals Bottom View J
cULus Listed to UL 199
cULus Certified for Health Effects to NSF/ANSI
Standard 61 Annex G (RFC30LL only)
Watermark Certified (RFC30LL only)
Model RFC30 & RFC30LL Sprinkler Components and Dimensions
Threa
Body
Cup
Tower
Fusible Lii
Deflector (retrac
Pin (exten(
Deflector (exten(
1-3/4" (44 mm) +/- 1/4" (6 mm)
Nominal face of fitting to ceiling
i
OOBFIG01_02_W
Model G5 Cover Plate
Model RFC30 and RFC30LL Sprinkler Hydraulic Design Criteria
2-5/16"
(58 mm)
Cup Dia.
uia.
2-5/8" (67 mm)
Hole in Ceiling
3/16"
(5 mm)
Ceiling
Minimum Flow and Residual Pressure M
Max. Coverage Area (2)
Flow
Pressure
ft. x ft.
gpm
psi
(m x m)
(1/min)
(bar)
12 x 12
9
9.0
(3.6 x 3.6)
(34)
(0.62)
14 x 14
10
-7
11.0
(4.3 x 4.3)
(38)
(0.76)
Notes:
1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table B above and (2) the flow required to achieve a
minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler.
2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed.
Bulletin 006 Reliable Page 2 of 8
June 2021 www.reliablesprinkler.com
Technical Specifications
Style: Flat Concealed Pendent
Threads: 1/2" NPT or ISO 7-1R1/2
Nominal K-Factor: 4.3 (62 metric)
Max. Working Pressure: 175 psi (12 bar)
Min. Spacing: 8 ft. (2.4 m)
Material Specifications
Thermal Sensor: Nickel Alloy Solder Link
Sprinkler Body: Brass Alloy
Levers: Bronze Alloy
Yoke: Brass Alloy
Sealing Assembly: Nickel Alloy with PTFE
Load Screw: Bronze Alloy
Towers: Copper Alloy
Pins: Stainless Steel
Deflector: Bronze Alloy
Cup: Steel
Cover Plate Finishes
(See Table H)
Sensitivity
Fast -response
Temperature Rating
Ordinary:
165°F (74°C) sprinkler
135°F (57°C) cover plate
Intermediate:
212°F (100°C) sprinkler
165°F (74°C) cover plate
Cover Plate
Model G5 Cover Plate
Sprinkler Wrench
Model FC (without wrench -able cap)
Model W3 (with wrench -able cap)
Listings and Approvals
cULus Listed to UL 199
cULus Certified for Health Effects to NSF/ANSI
Standard 61 Annex G (RFC43LL only)
Watermark Certified (RFC43LL only)
Model RFC43 & RFC43LL Sprinkler Components and Dimensions
Threa -
Body
Cup
Tower
Fusible Lit
Deflector (retrac
Pin (extended) -
Deflector (extended) -s
1-3/4" (44 mm) +/- 1/4" (6 mm)
Nominal face of fitting to ceiling
006FIGa1 az oa
Model G5 Cover Plate
Model RFC43 & RFC43LL Sprinkler Hydraulic Design Criteria
Bottom View
2-5/16"
(58 mm)
Cup Dia.
IM
3-5/16"
(84 mm)
Dia.
2-5/8" (67 mm)
Hole in Ceiling
3/16"
(5 mm)
Ceiling
Minimum Flow and Residual Pressure f'I
Max. Coverage Area izl
Ordinary Temperature
Intermediate Temperature
Flow
Pressure
Flow
Pressure
ft. x ft.
(m x m)
gpm
psi
gpm
psi
(1/min)
(bar)
(1/min)
(bar)
15 x 15
12
7.8
12
7.8
(4.6 x 4.6)
(45)
(0.54)
(45)
(0.54)
16 x 16
13
9.1
13
9.1
(4.9 x 4.9)
(49)
(0.63)
(49)
(0.63)
18 x 18
18
17.5
(5.5 x 5.5)
(68)
(1.21)
20 x 20
21
23.8
(6.1 x 6.1)
(79)
(1.64)
Notes:
1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table C above and (2) the flow required to achieve a
minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler.
2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed.
Bulletin 006 Reliable Page 3 of 8
June 2021 www.reliablesprinkler.com
Technical Specifications
Style: Flat Concealed Pendent
Threads: 1/2" NPT or ISO 7-1R1/2
Nominal K-Factor: 4.9 (71 metric)
Max. Working Pressure: 175 psi (12 bar)
Min. Spacing: 8 ft. (2.4 m)
Material Specifications
Thermal Sensor: Nickel Alloy Solder Link
Sprinkler Body: Brass Alloy
Levers: Bronze Alloy
Yoke: Brass Alloy
Sealing Assembly: Nickel Alloy with PTFE
Load Screw: Bronze Alloy
Towers: Copper Alloy
Pins: Stainless Steel
Deflector: Bronze Alloy
Cup: Steel
Sensitivity
Fast -response
Temperature Rating
Ordinary:
165°F (74°C) sprinkler
135°F (57°C) cover plate
Intermediate:
212°F (100°C) sprinkler
165°F (74°C) cover plate
Cover Plate
Model G5 Cover Plate
Sprinkler Wrench
Model FC (without wrench -able cap)
Model W3 (with wrench -able cap) Bottom View
Cover Plate Finishes Listings and Approvals
cULus Listed to UL 199
(See Table H) cULus Certified for Health Effects to NSF/ANSI
Standard 61 Annex G (RFC49LL only)
Watermark Certified (RFC49LL only)
Model RFC49 & RFC49LL Sprinkler Components and Dimensions
Threa -
Body
Cup
Tower
Fusible Lii
Deflector (retrac
Pin (exten(
Deflector (exten(
1-3/4" (44 mm) +/- 1/4" (6 mm)
Nominal face of fitting to ceiling
006FIG01_0203
Model G5 Cover Plate
Model RFC49 & RFC49LL Sprinkler Hydraulic Design Criteria
2-5/16"
(58 mm)
Cup Dia.
aw
3-5/16"
(84 mm)
Dia.
2-5/8" (67 mm)
Hole in Ceiling
3/16"
(5 mm)
Ceiling
Minimum Flow and Residual PressureM
Max. Coverage Area (z)
Ordinary Temperature
Intermediate Temperature
Flow
Pressure
Flow
Pressure
ft. x ft.
(m x m)
gpm
psi
gpm
psi
(1/min)
(bar)
(1/min)
(bar)
16 x 16
13
7.0
13
7.0
(4.9 x 4.9)
(49.0)
(0.48)
(49.0)
(0.48)
18 x 18
17
12.0
17
12.0
(5.5 x 5.5)
(64.3)
(0.83)
(64.3)
(0.83)
20 x 20
20
16.7
21
18.4
(6.1 x 6.1)
(75.7)
(1.15)
(79.5)
(1.27)
Notes:
1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table D above and (2) the flow required to achieve a mini-
mum design density of 0.1 gpm/sq ft over the design area of the sprinkler.
2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed.
Bulletin 006 Reliable Page 4 of 8
June 2021 www.reliablesprinkler.com
Technical Specifications
Style: Flat Concealed Pendent
Threads: 1/2" NPT or ISO 7-1R1/2
Nominal K-Factor: 5.8 (84 metric)
Max. Working Pressure: 175 psi (12 bar)
Min. Spacing: 8 ft. (2.4 m)
Material Specifications
Thermal Sensor: Nickel Alloy Solder Link
Sprinkler Body: Brass Alloy
Levers: Bronze Alloy
Yoke: Brass Alloy
Sealing Assembly: Nickel Alloy with PTFE
Load Screw: Bronze Alloy
Towers: Copper Alloy
Pins: Stainless Steel
Deflector: Chrome Plated Bronze Alloy
Cup: Steel
Cover Plate Finishes
(See Table H)
Sensitivity
Fast -response
Temperature Ratings
Ordinary:
165°F (74°C) sprinkler
135°F (57°C) cover plate
Intermediate:
212°F (100°C) sprinkler
165°F (74°C) cover plate
Cover Plate
Model G5 Cover Plate
Sprinkler Wrench
Model FC (without wrench -able cap)
Model W3 (with wrench -able cap)
Listings and Approvals
cULus Listed to UL 199
Model RFC58 Sprinkler Components and Dimensions
Bottom View
2-
(58 mm)
Threads
Cup Dia.
Body
Cup
Tower
2 5/8" (67 mm)
Fusible Link
1 7/8" (48 mm) +/- 3/8" (9 mm)
Hole in Ceiling
Nominal face of fitting to ceiling
3/16"
Deflector (retracted) —
(5 mm)
Pin (extended)
H H
""6F�"4A
Deflector (extended) — �3-==F��3== F�
3-5/16"
Model G5 Cover Plate
(84 mm)
Ceiling
Dia.
Model RFC58 Sprinkler Hydraulic Design Criteria
Minimum Flow and Residual PressureN
Max. Coverage Area
Flow
Pressure
ft. x ft.
gpm
psi
(m x m)
(1/min)
(bar)
16 x 16
16
7.6
(4.9 x 4.9)
(60.6)
(0.53)
18 x 18
18
9.6
(5.5 x 5.5)
(68.1)
(0.66)
20 x 20
20
11.9
(6.1 x 6.1)
(75.7)
(0.82)
Notes:
1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table E above and (2) the flow required to achieve a
minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler.
2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed.
Bulletin 006 Reliable Page 5 of 8
June 2021 www.reliablesprinkler.com
Technical Specifications
Style: Flat Concealed Pendent
Threads: 3/4" NPT or ISO 7-1 R3/4
Nominal K-Factor: 7.6 (109 metric)
Max. Working Pressure: 175 psi (12 bar)
Min. Spacing: 8 ft. (2.4 m)
Material Specifications
Thermal Sensor: Nickel Alloy Solder Link
Sprinkler Body: Brass Alloy
Levers: Bronze Alloy
Yoke: Brass Alloy
Sealing Assembly: Nickel Alloy with PTFE
Load Screw: Bronze Alloy
Towers: Copper Alloy
Pins: Stainless Steel
Deflector: Bronze Alloy
Cup: Steel
Cover Plate Finishes
(See Table H)
Sensitivity
Fast -response
Temperature Ratings
Ordinary:
165°F (74°C) sprinkler
135°F (57°C) cover plate
Intermediate:
212°F (100°C) sprinkler
165°F (74°C) cover plate
Cover Plate
Model G5 Cover Plate
Sprinkler Wrench
Model FC (without wrench -able cap)
Model W3 (with wrench -able cap)
Listings and Approvals
cULus Listed to UL 199
Model RFC76 Sprinkler Components and Dimensions
Threads
Body
Cup �`
Tower
Fusible Link
Deflector (retracted) —
Pin (extended) —
Deflector (extended) —
F1 =`
Bottom View
ti
2-5/16"
(58 mm)
Cup Dia.
1-7/8" (48 mm) +/ 3/8" (9 mm)
Nominal face of fitting to ceiling
OOBFIG05A
Model G5 Cover Plate
Model RFC76 Flat Concealed Sprinkler Hydraulic Design Criteria
3-5/16"
(84 mm)
Dia.
jrHole in Ceiling
2-5/8" (67 mm)
3/16"
(5 mm)
Ceiling
Minimum Flow and Residual Pressure0)
Max. Coverage Area
Flow
Pressure
ft. x ft.
gpm
psi
(m x m)
(1/min)
(bar)
16 x 16
21
7.6
(4.9 x 4.9)
(79.5)
(0.52)
18 x 18
24
9.9
(5.5 x 5.5)
(90.8)
(0.68)
20 x 20
34
20
(6.1 x 6.1)
(128.7)
(1.4)
Notes:
1. For NFPA 13 installations the flow per sprinkler must be the greater of: (1) the flow listed in Table E above and (2) the flow required to achieve a
minimum design density of 0.1 gpm/sq ft over the design area of the sprinkler.
2. For coverage area dimensions less than those listed above, use the minimum required flow for the next larger max. coverage area listed.
Bulletin 006 Reliable Page 6 of 8
June 2021 www.reliablesprinkler.com
Cover Plate Finishes0)
Standard Finishes Special Application Finishes
White Polyester Off White Paint Black Paint Raw Brass
Chrome Plated Bright Brass Finished Bronze Black Plated
Satin Chrome Stainless Steel Clad(3) Custom Color Paint(2)
Notes:
1. Paint or any other coating applied over the factory finish will void all approvals and warranties.
2. Custom color paint is semi -gloss, unless specified otherwise.
3. Stainless steel clad cover plates are Type 316 Stainless Steel on the finished side and C102 Copper Allow on the back side. Cover plates
are not listed or approved as corrosion resistant.
Installation Dimensions
Recommended
Min. to
Min. to Max.
Sprinkler
Cover
Cover Plate
Hole Diameter
Cover Plate
Max. Face
Dropped Deflector
Cover Plate
Model
Plate
Diameter
in Ceiling
Adjustment
of Fitting to
Distance below
Temperature
Model
inch (mm)
inch (mm)
inch (mm)
Ceilings')
Ceiling
Rating
inch (mm)
inch (mm)
RFC30,
G5
3-5/16
2-5/8
1/2
1-1/2 to 2
1/2 to 1
135°F
RFC30LL
(84)
(67)
(13)
(38 to 51)
(13 to 25)
(57°C)
RFC43,
135°F(2)
RFC43LL,
G5
3-5/16
2-5/8
1/2
1-1/2 to 2
1/2 to 1
(57°C)
RFC49,
(84)
(67)
(13)
(38 to 51)
(13 to 25)
or 165°F
RFC49LL
(74°C)
RFC58,
G5
3-5/16
2-5/8
3/4
1-1 /2 to 2-1/4
1 /4 to 1
13oor 1655E 3C)
RFC76
(84)
(67)
(19)
(38 to 57)
(6 to 25)
(74°C)
Notes:
1. Face of fitting to ceiling dimensions are based on a nominal thread make up. Verify dimensions based on fitting and thread sealing method prior to
installation. A 1/2" x 112" brass nipple extension (Reliable P/N 6999991900) is available where necessary for replacement of existing sprinklers.
2. For use with 165T (74°C) temperature rated sprinklers where the maximum ceiling temperature does not exceed 100T (38°C).
3. For use with 212T (100°C) temperature rated sprinklers where the maximum ceiling temperature does not exceed 150°F (66°C).
Installation
Model RFC series sprinklers are intended to be installed in
accordance with NFPA 13, NFPA 13R, or NFPA 13D, as well as
the requirements of applicable authorities having jurisdiction.
Model RFC series sprinklers must not be installed in ceilings with
positive pressure in the space above. Ensure that the 4 slots in
the cup are open and unobstructed following installation. Model
RFC series sprinklers are shipped with a wrench -able protective
cap that should remain on the sprinkler until the sprinkler system
is placed in service following construction.
Model RFC series sprinklers can be installed without removing
the wrench -able protective cap using the Model W3 wrench.
Alternatively, Model RFC series sprinklers can be installed using
the Model FC wrench by temporarily removing the protective cap
during installation of the sprinkler. The use of any other wrench
to installed Model RFC series sprinklers is not permitted and may
damage the sprinkler. Fully insert the Model W3 wrench over
the cap until it reaches the bottom of the cup, or the Model FC
wrench over the sprinkler until the wrench engages the body.
Do not wrench any other part of the sprinkler/cup assembly. The
Model W3 and FC wrenches are designed to be turned with a
standard 1/2" square drive. Tighten the sprinkler into the fitting
after applying a PTFE based thread sealant to the sprinkler's
threads. Recommended installation torque for iron pipe fittings is
8 to 18 ft-Ibs (11 to 24 N-m) for 1/2" thread sprinklers and 14 to
20 ft-Ibs (19 to 27 N-m) for 3/4" thread sprinklers.
Note: When used with gasketed fittings, follow fitting
manufacturer's installation instructions regarding tightening to
achieve a leak -free connection.
Do not exceed the maximum recommended torque. Exceeding
the maximum recommended torque may cause leakage or
impairment of the sprinkler. Use care when inserting or removing
the wrench from the sprinkler to avoid damage to the sprinkler.
Install the cover plate by hand by pushing the cover plate into the
cup and turning the cover in the clockwise direction until it is tight
against the ceiling.
Bulletin 006
June 2021
Page 7 of 8
www.reliablesprinkler.com
Model FC
For use with Model RFC Series sprinklers
without wrench -able cap installed
Model W8
High -strength plastic wrench
for limited (emergency)
use with Model RFC Series
sprinklers without wrench -able
cap installed. Meets NFPA
requirements for sprinkler
wrench on premises.
Maintenance
Model RFC series sprinklers should be inspected and the
sprinkler system maintained in accordance with NFPA 25. Do
not clean sprinklers with soap and water, ammonia or any other
cleaning fluids. Remove dust by gentle vacuuming. Replace any
sprinkler cover plate assembly which has been painted (other
than factory applied) or damaged in any way. A stock of spare
sprinklers should be maintained to allow quick replacement of
damaged or operated sprinklers. Prior to installation, sprinklers
should be maintained in the original cartons and packaging until
used to minimize the potential for damage to sprinklers that would
cause improper operation or non -operation.
Guarantee
For the Reliable Automatic Sprinkler Co., Inc. guarantee, terms,
and conditions, visit www.reliablesprinkler.com.
Model W3
For use with Model RFC Series sprinklers with
wrench -able cap installed
Listings and Approvals
�J
Listed by Underwriters Laboratories, Inc. and UL Certified for
Canada to UL 199, Automatic Sprinklers for Fire -protection
Service (cULus).
Certified by Underwriters Laboratories, Inc. and Underwriters
Laboratories of Canada for Health Effects to NSF/ANSI Standard
61 Annex G (LL) (RFC30LL, RFC43LL, and RFC49LL only).
Australian WaterMark Certified (RFC30LL, RFC43LL, and
RFC49LL only).
Patents
Model RFC30, RFC30LL, RFC43, RFC43LL, RFC49, RFC49LL,
RFC58, and RFC76 sprinklers are covered by U.S. Patent No.
9,248,327 and U.S. Patent No. 7,275,603.
Model RFC30, RFC30LL, RFC43 and RFC43LL sprinklers are
additionally covered by U.S. Patent No. 8,776,903.
Ordering Information
Specify the following when ordering.
Sprinkler
• Model (RFC30, RFC30LL, RFC43, RFC43LL,
RFC49, RFC49LL, RFC58, RFC76)
• Temperature Rating
Cover Plate
• Model G5
• Temperature Rating
• Finish (See Table H)
Sprinkler Wrench
• Model FC
• Model W3
• Model W8 (Limited use)
R.
Bulletin 006
June 2021
Page 8 of 8
www.reliablesprinkler.com
Bulletin 014 August 2021
limabile
Model F1 FR56 Sprinkler Types
Standard Spray Upright
Standard Spray Pendent
Conventional Upright/Pendent
Vertical Sidewall
Horizontal Sidewall
Model F1 FR56 Recessed Sprinkler Types
Standard Spray Pendent
Horizontal Sidewall
Model F1 FR56 Concealed Sprinkler Types
Standard Spray Pendent
Model F1 FR42, F1 FRXLH & F1 FR28 Sprinkler
Types
Standard Spray Upright
Standard Spray Pendent
Model F1 FR40 Sprinkler Types
Standard Spray Pendent
Model F1 FR42, F1 FR40, F1 FRXLH & F1 FR28
Recessed Sprinkler Types
Standard Spray Pendent
Model F1 FR56LL & F1 FR42LL Low Lead Sprinkler
Types
Standard Spray Pendent with less than 0.25% Lead Con-
tent
Listing & Approvals
The following organizations provide Listings or Approvals for
various Model F1 FIR series sprinklers. See the Design and
Installation table in this Bulletin for information on specific
listings and approvals applicable to each sprinkler.
1. Underwriters Laboratories Inc. and Certified for Cana-
da (cULus) in accordance with ANSI/UL199.
2. FM Approvals (FM)
3. Loss Prevention Certification Board (LPCB)
4. VdS SchadenverhOtung GmbH (VdS)
5. Underwriters Laboratories Inc. and Underwriters Lab-
oratories of Canada Certified for Health Effects to NSF/
ANSI Standard 61 Annex G (ULH)
6. EC Certificate: 0786-CPD-40239 (RA1414), 0786-
CPD-40251 (RA1425), 0786-CPD-40252 (RA1475)
(EC)
7. WaterMark certified. Certificate Number 23347. (WM)
UL Listing Category
Sprinklers, Automatic & Open (VNIV)
Quick Response Sprinkler
Model F1 FR Series
Quick Response
Glass Bulb Sprinklers
Upright Pendent Conventional
Vertical Sidewall Horizontal Sidewall Recessed
Pendent/F1/F2
Recessed Concealed Recessed
Horizontal Sidewall Pendent Pendent/FP
XLH Upright XLH Pendent XLH Recessed
Pendent F1/F2
Product Description
Reliable Model F1 FR series sprinklers
are quick -response automatic sprinklers
with a glass bulb thermal element. Model
F1 FIR series sprinklers are Standard Spray
sprinklers, with the exception of the Model
F1 FR56 Conventional sprinkler which is XLH Recessed
an Old-style/Conventional sprinkler. Pendent FP
The Model F1 FR Series automatic sprinklers utilize a 3.0
mm frangible glass bulb. These sprinklers have demonstrated
response times in laboratory tests which are five to ten times
faster than standard response sprinklers. This quick response
enables the Model F1 FIR Series sprinklers to apply water to a
fire faster than standard -response sprinklers of the same tem-
perature rating.
The glass bulb consists of an accurately controlled amount
of special fluid hermetically sealed inside a precisely manufac-
tured glass capsule. This glass bulb is specially constructed to
provide fast thermal response.
co
S
0
D
c
c
N
O
N
Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
At normal temperatures, the glass bulb contains the fluid in
both the liquid and vapor phases. The vapor phase can be seen
as a small bubble. As heat is applied, the liquid expands, forcing
the bubble smaller and smaller as the liquid pressure increases.
Continued heating forces the liquid to push out against the bulb,
causing the glass to shatter, opening the waterway and allowing
the deflector to distribute the discharging water.
Model F1 FIR Series sprinklers provide a wide range of options
where quick -response, glass bulb sprinklers are used:
• Pendent, recessed pendent, upright, horizontal side -
wall, and vertical sidewall deflectors
• K-factors of 2.8 (40 metric), 4.0 (57 metric), 4.2 (60
metric), and 5.6 (80 metric)
• Flush, recessed, and concealed installations
See the Design and Installation Information table in this Bul-
letin for information on the approvals and availability of specific
Model F1 FIR series sprinkler configurations.
Model F1 FIR Recessed Pendent and Recessed Horizontal
Sidewall sprinklers are required to be used with Reliable Model
F1, F2, or FP recessed escutcheons. See the Recessed Es-
cutcheon Data table in this Bulletin for listing and approval infor-
mation with each specific Model F1 FIR series sprinkler. Model
F1 and F2 recessed escutcheons, shown in Fig. 1 and 3, are
a friction fit assembly allowing for 3/4-inch (19mm) and 1/2-
inch (12.7mm) of adjustment, respectively. Model FP recessed
escutcheons, shown in Fig. 2, provide a 1/2-inch (12.7mm)
threaded adjustment.
Model F1 FR56 Concealed Pendent and Model F1 FR56LL
Concealed Pendent sprinklers are required to be used with
Model CCP cover plates. A standard profile Model CCP cover
plate is available that provides up to 1/2-inch (12.7mm) of cover
plate adjustment. In addition, a low profile Model CCP cover
plate is also available that provides up to 5/16-inch (8.Omm) of
cover plate adjustment. See the Design and Installation Infor-
mation and Listed and Approved Temperature Ratings tables
in this Bulletin for further information on approved cover plate
options.
Application
Model F1 FIR Series sprinklers are intended for use in ac-
cordance with NFPA 13, FM Property Loss Prevention Data
Sheets, and the requirements of the Authority Having Juris-
diction. Care must be exercised that the k-factor, tempera-
ture rating, deflector style, and sprinkler type are in accor-
dance with the requirements of the applicable design and
installation standards. In addition, Model F1 FIR Series sprin-
klers must be used in accordance with their listings and ap-
provals, as well as the information provided in this Bulletin.
Installation
Glass bulb sprinklers have orange bulb protectors or protec-
tive caps to minimize bulb damage during shipping, handling
and installation. Reliable sprinkler installation wrenches are
designed to install sprinklers with bulb protectors in place. Re-
move the bulb protector at the time when the sprinkler system is
placed in service for fire protection. Removal of the bulb protec-
tor before this time may leave the bulb vulnerable to damage.
Remove bulb protectors by undoing the clasp by hand. Do not
use tools to remove bulb protectors.
Model F1 FIR Series sprinklers must be installed with the Reli-
able sprinkler installation wrench identified in the Design and
Installation Information table in this Bulletin. Any other wrench
may damage the sprinkler. A leak tight sprinkler joint can be
obtained with a torque of 8 to 18 lb-ft (11 to 24 N-m). Do not
tighten sprinklers over the maximum recommended installation
torque. Exceeding the maximum recommended installation
torque may cause leakage or impairment of the sprinkler.
Recessed Sprinklers
Model F1 FR Series Recessed sprinklers are to be installed
as shown in Fig. 1, Fig. 2, or Fig. 3, as applicable to the specific
model being installed. The Recessed Escutcheon Data table in
the Bulletin identifies the only recessed escutcheons that are
permitted to be used with each Model F1 FIR Series Recessed
sprinkler. The use of any other recessed escutcheon will void all
approvals and negate all warranties.
Concealed Sprinklers
Model F1 FIR Series Concealed Pendent sprinklers are to
be installed as shown in Fig. 4 or Fig. 5, as applicable to the
selected cover plate. Model F1 FR56 Concealed Pendent and
Model F1 FR56LL Concealed Pendent sprinklers have a facto-
ry -installed Model CCP cup. A protective cap is installed at the
factory that should remain on the sprinkler until the sprinkler is
installed and should then be reinstalled on the sprinkler until the
cover plate is installed. The concealed sprinkler assemblies are
completed by the installation of a Model CCP push-on/thread-
off cover plate assembly. The cover plate and sprinkler cup as-
semblies are joined using a cover plate skirt with flexible tabs
for threaded engagement. A choice of two Model CCP cover
plate assemblies provides either 1/2-inch (13mm) or 5/8-inch
(8mm) of cover adjustment. Do not install Model F1 FIR Series
Concealed Pendent sprinklers in ceilings which have positive
pressure in the space above.
Model F1 FIR Series Concealed Pendent sprinklers require
a 2-5/8-inch (67mm) diameter hole to be cut in the ceiling. The
Model W4 wrench is used to engage the sprinkler wrenching sur-
faces and to install the sprinkler in the fitting. Remove the protective
cap to install the sprinkler, then reinstall the protective cap until the
cover plate is installed. When inserting or removing the wrench from
the sprinkler/cup assembly, care should be taken to prevent dam-
age to the sprinkler. Do not wrench any other part of the sprinkler/
cup assembly. Installation is completed by removing the protective
cap from the sprinkler and pushing the cover plate onto the cup.
Final adjustment is made by hand turning the cover plate until the
skirt flange makes full contact with the ceiling. Cover plate removal
requires turning the cover plate in the counter clockwise direction.
After installation, inspect all sprinklers to ensure that there is a gap
between the cover plate and ceiling and that the four cup slots are
open and free from any air flow impediment to the space above.
Concealed cover plate/cup assemblies are listed only for use
with specific sprinklers. The use of any concealed cover plate/
cup assembly other than the Reliable Model CCP with Model
F1 FR56 Concealed Pendent and Model F1 FR56LL Concealed
Pendent sprinklers or the use of the Model CCP Concealed
cover plate assembly on any sprinkler with which it is not spe-
cifically listed my prevent good fire protection and will void all
guarantees, warranties, listings and approvals.
2.
Technical Data:
Sensitivity: Quick -response
Thread Size: 1/2-inch NPT standard; ISO 7-R1/2 optional
Maximum Working Pressure: 175 psi (12 bar) - 100% Factory tested hydrostatically to 500 psi (34.5 bar)
SIN RA1425, RA1414 & RA1435 cULus listed for 250 psi (17 bar)
Design and Installation Information
Model
Nominal
K-factor
Nominal
Orifice
Diameter
Deflector/
Orientation
Nominal
Sprinkler
Height
Installation
Wrench
SIN
Listings
and
Approvals
Approval
Notes
US
Metric
inches
mm
inches
mm
Pendent
2.25
57
W2
RA1411
cULus
2
F1 FR28
2.8
40
3/8
10
Recessed Pendent
2.25
57
W4
RA1411
cULus
2
Upright
2.25
57
W2
RA1421
cULus
1,2
F1 FR40
4.0
57
3/8
10
Pendent
2.25
57
W2
RA1418
VdS
Recessed Pendent
2.25
57
W4
RA1418
VdS
Pendent
2.25
57
W2
RA1413
cULus
2
F1 FR42
4.2
60
7/16
10
Recessed Pendent
2.25
1 57
W4
RA14131
cULus
2
Upright
2.25
57
W2
RA1423
cULus
1,2
F1 FR42LL
4.2
60
7/16
10
Pendent
2.25
57
W2
RA1410
cULus, ULH
Recessed Pendent
2.25
57
W4
RA1410
cULus, ULH
F1 FRXLH
Pendent
2.25
57
W2
RA1413
cULus
2
Recessed Pendent
2.25
57
W4
RA1413
cULus
2
(F1 FR42
4.2
60
7/16
10
with Pintle)
Upright
2.25
57
W2
RA1423
cULus
1,2
cULus, FM,
Pendent
2.25
57
W2
RA1414
LPCB, VdS, EC,
1,2,3,4
WM
cULus, FM,
Recessed Pendent
2.25
57
W4
RA1414
LPCB, VdS, EC,
1,2,3,4
WM
F1 FR56
5.6
80
1 2
15
Concealed Pendent
2.25
57
W4
RA1414
cULus VdS,EC,
WM
5,6
cULus, FM,
Upright
2.25
57
W2
RA1425
LPCB, VdS, EC,
1,2,3,4
WM
"Conventional
(Pendent or Upright)"
2.25
57
W2
RA1475
LPCB, VdS, EC,
WM
4
Pendent
2.25
57
W2
RA1415
cULus, ULH
1
Recessed Pendent
2.25
1 57
W4
RA14151
cULus, ULH
FlFR56LL
5.6
80
1/2
15
Concealed Pendent
2.25
57
W4
RA1415
cULus, ULH
6
Horizontal Sidewall
2.63
67
W2
RA1435
cULus, FM
1,2,3,7
FlFR56
5.6
80
1/2
15
Recessed Horizontal
Sidewall
2.63
67
W4
RA1435
cULus, FM
8
F1 FR56
5.6
80
1/2
15
Vertical Sidewall (Pen-
dent or Upright)
2.25
57
W2
RA1485
cULus, FM,
LPCB
1,2,3,9
(') cULus Listed Corrosion Resistant sprinkler when ordered with available Polyester coating.
(1) cULus Listed Corrosion Resistant sprinkler when ordered with available Electroless Nickel PTFE plating.
(1) Available with FM approved Polyester coating in black or white.
(4) Available with LPCB and VdS approved Polyester coating.
(1) VdS and EC approvals of the F1 FR56 Concealed Pendent sprinkler are for 1550F (68°C) temperature rated sprinklers only. VdS approved sprinklers must
use Norbulb brand glass bulbs with the 1/2-inch (12.7mm) adjustment Model CCP cover plate only.
(1) Model F1 FR56 Concealed Pendent and Model F1 FR56LL Concealed Pendent sprinklers must be used with Reliable Model CCP cover plates, available
as either standard depth with 1/2-inch (12.7mm) of adjustment or low profile with 5/16-inch (8.0 mm) of adjustment.
(') cULus Listing of the F1 FR56 Horizontal Sidewall sprinkler is for Light and Ordinary Hazard occupancies only. Minimum to maximum deflector to ceiling
distance shall be 4 inches to 12 inches (102mm to 305mm). FM Approval of the F1 FR56 Horizontal Sidewall sprinkler is for Light Hazard occupancies
only.
(1) cULus Listing and FM Approval of the F1 FR56 Recessed Horizontal Sidewall sprinkler is for Light Hazard occupancies only.
(1) The F1 FR56 Vertical Sidewall sprinkler is listed and approved for use only in Light Hazard occupancies. LPCB approval of the F1 FR56 Vertical Sidewall
sprinkler is for installation in the Pendent position only.
Listed and Approved Temperature Ratings
Model
Deflector/
Orientation
Ordinary Temp.
Classification
100T (38*C) Max. Ambient
Temp.
Intermediate Temp.
Classification
150T (65*C) Max. Ambient
Temp.
High Temp.
Classification
225T (107°C) Max.
Ambient Temp.
135°F (57°C)
Temp. R ting
155°F (68°C)
Temp. Rating
175°F (79°C)
Temp. Rating
200°F (93°C)
Temp. Rating
286T (141°C) Temp.
Rating
Orange Bulb
Red Bulb
Yellow Bulb
Green Bulb
Blue Bulb
Pendent
cULus
F1 FR28
Recessed Pendent
cULus
Upright
cULus
Pendent
VdS
F1 FR40
Recessed Pendent
VdS
Pendent
cULus
F1 FR42
Recessed Pendent
cULus
Upright
cULus
FlFR42LL
Pendent
Recessed Pendent
cULus, ULH
cULus, ULH
Pendent
cULus
F1 FRXLH
Recessed Pendent
cULus
Upright
cULus
Pendent
cULus, FM, LPCB, VdS, EC, WM
Recessed Pendent
cULus, FM, LPCB, VdS, EC, WM
F1FR56
Concealed Pendent
cULus, WM
cULus,, dS,EC,
WM
cULus, WM
Upright
cULus, FM, LPCB, VdS, EC, WM
"Conventional
Pendent or Upright)"
LPCB, VdS, EC, WM
Pendent
cULus, ULH
F1FR56LL
Recessed Pendent
cULus, ULH
Concealed Pendent'
EA9E���cULus,
ULH
Horizontal Sidewall
cULus, FM
F1 FR56
Recessed Horizontal
Sidewall
cULus, FM
r1F1 FR56
Vertical Sidewall (Pen-
dent or Upri ht
cULus, FM, LPCB
* Model F1 FR56 Concealed Pendent and F1 FR56LL Concealed Pendent sprinklers must be used with Reliable Model CCP
cover plates. For Ordinary Temperature Classification sprinklers use a 135°F (57°C) temperature rated cover plate. For In-
termediate Temperature Classification sprinklers use a 165°F (74°C) temperature rated cover plate.
Recessed Escutcheon Data
Listed and
Approved Recessed
Escutcheons
Model F1
Model F2
Model FP
Model
Deflector/
(Fig. 1 & 3)
(Fig. 1 & 3)
(Fig. 2)
SIN
Orientation
3/4-inch (19mm)
1/2-inch (12.7mm)
1/2-inch (12.7mm)
adjustment
adjustment
adjustment
F1FR28
Recessed Pendent
cULus
cULus
cULus
RA1411
F1 FR40
Recessed Pendent
VdS
VdS
VdS
RA1418
F1FR42
Recessed Pendent
cULus
cULus
cULus
RA1413
FlFR42LL
Recessed Pendent
cULus, ULH
cULus, ULH
cULus, ULH
RA1410
FlFR42XLH
Recessed Pendent
cULus
cULus
cULus
RA1413
F1FR56
Recessed Pendent
cULus, LPCB, VdS,
cULus, FM, LPCB,
cULus, VdS, EC, WM
RA1414
EC, WM
VdS, EC, WM
FlFR56LL
Recessed Pendent
cULus, ULH
cULus, ULH
cULus, ULH
RA1415
F1FR56
Recessed Horizontal Sidewall
cULus
cULus, FM
cULus
RA1435
9
TURN COLLAR
UNTIL TIGHT
AGAINST SPRINKLER
WRENCH BOSS --�\\
F7 ESCUTCHEONr//1�
3/4'[19mm] e1
ADJUSTMENT
F2 ESCUTCHEON
112'T 12.7mm]
ADJUSTMENT
2 114" HOLE DIA.
[57.2mm]
1 15116" DIA
[49.2mmJ l
F S i i -1
II II
L J�
2 27132" DIA.
[72.2mmJ
1" X 1/2" REDUCER
FACE OF FITTING
TO FACE OF CEILING DIMENSION
F1 ESCUTCHEON
AT MAXIMUM RECESS = i'[25.4mm]
AT MINIMUM RECESS = 318'T9.5mm]
F2 ESCUTCHEON
AT MAXIMUM RECESS = 3/4'[19mm]
AT MINIMUM RECESS = 318'T9.5mmj
F1 ESCUTCHEON
AT MAXIMUM RECESS = 7/8'T22.2mm]
[3.2mmJ
AT MINIMUM RECESS = 1-5/8'[41.3mm]
F2 ESCUTCHEON
AT MAXIMUM RECESS = 1-1/8'[28.6mm]
AT MINIMUM RECESS = 1-5/8'T41.3mm]
Fig.1
Model F1 FR56, F1 FR56LL, F1 FR42, F1 FR40, F1 FR421-L, F1 FRXLH & F1 FR28
Recessed Pendent sprinkler with Model F1 or F2 escutcheon
I I 1 " X 1/2"' REDUCER
-----I-----
2 5/8" DIA. [66.7mm]
HOLE IN CEILING 1 I
2 5/16" DIA. [58.7mm]
CUP
L J
CEILING FACE OF FITTING
TO FACE OF CEILING
DIMENSION
- AT MAXIMUM RECESS = 1-1/2"T38mm]
AT MINIMUM RECESS = 1 'T25.4mm]
AT MAXIMUM RECESS = 9/16'T14.3mm]
%2'T 12.7mm] AT MINIMUM RECESS = 1 'T25.4mm]
ADJUSTMENT
3 1/4" DIA.
[82.6mm]
Fig. 2
Model F1 FR56, F1 FR56LL, F1 FR42, F1 FR40, F1 FR42LL, F1 FRXLH & F1 FR28
Recessed Pendent sprinkler with Model FP escutcheon
5.
FACE OF FITTING
TO FACE OF CEILING DIMENSION
F1 ESCUTCHEON
AT MAXIMUM RECESS = I 'T25.4mm]
AT MINIMUM RECESS = 318'T9.5mm]
E2 ESCUTCHEON
AT MAXIMUM RECESS = 3/4'T 19mm]
AT MINIMUM RECESS = 3/8'T9.5mm]
2 114" HOLE DIA.
[57.2mm]
1" X 112" REDUCER
i i um I
1 15116" DIA. / uw
[49.2mm] of
um �
um
i
TURN COLLAR UNTILu
TIGHT AGAINST SPRINKLER
WRENCH BOSS.
118"
[3.2mm]
F1 ESCUTCHEON
AT MAXIMUM RE ESS 1 3 8" 34 9
C = - / [ . mm]
AT MINIMUM RECESS = 2-1/16'T52.4mm]
F2 ESCUTCHEON
AT MAXIMUM RECESS = 1-5/8'T41.3mm]
AT MINIMUM RECESS = 2-1/16'T52.4mm]
2 27/32" DIA.
[72.2mm]
F1 ESCUTCHEON
3/4'T 19mm] ADJUSTMENT
F2 ESCUTCHEON
1/2'T 12.7mm] ADJUSTMENT
1 (1)
4"-12"
[101.6mm-304.8mm]
CEILING TO
DEFLECTOR
oiarcoM
RECESSED HSW W/F1 OR F2 ESCUTCHEON
(1) FM APPROVED FOR 4" - 6" [101.6MM - 152.4MM] CEILING TO DEFLECTOR WITH F2 ONLY.
Fig. 3
Model F1 FR56 Recessed Horizontal Sidewall sprinkler with Model F1 or F2 escutcheon
I" x 112" REDUCING
TEE OR ELBOW
2 5116" DIA —
CUP
CEILING
2 518 " DIA.
HOLE IN CEILING
1 112 " MAX.
FACE OF FITTING
TO FACE OF CEILING
DIMENSION
I
112 " MAX.
COVER ADJUSTMENT j
COVER PLATE /
ASSEMBL Y 3 5116 " DIA
SPRINKLER
15/16"
CONCEALED. 1 /2" ADJUSTMENT 017FG01A
Fig. 4
Model F1 FR56/F1 FR56LL Concealed Pendent sprinkler with standard depth
1/2-inch (12.7mm) adjustment - Model CCP cover plate
Al
I" x
TEE
112" REDUCING
OR ELBOW _
2 5116"
CEILING
5116 " MAX. --I
COVER ADJUSTMENT
COVER PLATE
ASSEMBLY
SPRINKLER
- 2 518" DIA.
HOLE IN CEILING
1 112 " MAX.
FACE OF FITTING
TO FACE OF CEILING
"""' DIMENSION
CONCEALED, 5/16" ADJUSTMENT 017FG02A
ncealea renaent sprinKler wltn low
inch (8.Omm) adjustment - Model CCP cover plate
Maintenance
The Model F1 FIR Series sprinklers should be inspected and
the sprinkler system maintained in accordance with NFPA 25.
Do not clean sprinklers with soap and water, ammonia or any
other cleaning fluids. Remove dust by using a soft brush or gen-
tle vacuuming. Replace any sprinkler which has been painted
(other than factory applied) or damaged in any way. A stock of
spare sprinklers should be maintained to allow quick replace-
ment of damaged or operated sprinklers.
Finishes (1)
Standard Finishes
Sprinkler
Escutcheon
Cover late0)
Bronze
Brass
Chrome
Chrome Plated
Chrome Plated
White
Polyester Coated (400
White Painted
Special Application Finishes
S rinkler
Escutcheon
Cover late0)
Electroless Nickel
PTFEM
Electroless Nickel
PTFE
Bright Brass
Bright Brass(3)
Bright Brass
Black Plating
Black Plated
Black Plated
Black Paint
Black Paint(2)(6)
Black Paint
Off White
Off White(2)(6)
Off White
Satin Chrome
Chrome Dull
I Chrome Dull
(1) Other finishes and colors are available on special order. Consult the fac-
tory for details. Custom color painted sprinklers may not retain their UL
Corrosion resistance listing. Coverplate custom paint is semi -gloss, unless
specified otherwise.
(2) cULus Listed only.
(3) 200°F (93°C) maximum.
(4) cULus listed "corrosion resistance" applies to SIN Numbers RA1435
(HSW), RA1485(VSW), RA1425 (Upright), RA1414 (Pendent) and RA1415
(Pendent) in standard black or white. Corrosion resistance in other polyester
colors is available upon request.
(5) FM Approvals finish as "Polyester coated" applies to SIN Number
RA1414, RA1435 and RA1425 in standard black or white.
(6) LPCB and VdS Approved finish applies only to RA1425, RA1414, RA1418 (VdS)
and RA1475.
(') cULus listed Corrosion Resistant
514"
Material Data
Frame:
DZR Brass, QM Brass, or Low Lead Brass
Deflector:
CDA Alloy 220, 260, or 510
Load Screw\Pintle:
CDA Alloy 360 or 544
Cup:
CDA Alloy 651 or 693
Washer:
Nickel Alloy 440 or 360, coated with PTFE
Adhesive Tape
Bulb:
Glass
Ordering Information
Specify:
1. Sprinkler Model: [F1 FR28][F1 FR40][F1 FR42]
[F1 FR42LL][F1 FRXLH][F1 FR56][F1 FR56LL]
2. Sprinkler Deflector/Orientation: [Pendent][Recessed
Pendent] [Upright][Conventional][Horizontal Sidewall]
[Recessed Horizontal Sidewall][Vertical Sidewall]
3. Sprinkler threads: [1/2-inch NPT][ISO 7-R1/2]
4. Sprinkler Temperature Rating: [135'F (57°C)][155'F
(68°C)][175°F (79°C)][200°F (93°C)][286°F (141°C)]
5. Sprinkler Finish
6. Escutcheon Model: [F1][F2][FP]
7. Escutcheon Finish (where applicable)
8. Cover plate Model: [standard profile CCP 1/2-inch
(12.7mm) adjustment][low profile CCP 5/16-inch
(8.Omm) adjustment]
9. Cover plate Temperature Rating: [135'F (57°C) for use
with Ordinary Temperature sprinklers][165°F (74'C) for
use with Intermediate Temperature sprinklers]
10. Cover plate Finish
Note: When Model F1 FIR Series Recessed sprinklers are ordered, the sprin-
klers and escutcheons are packaged separately.
7.
Reliable ... For Complete Protection
Reliable offers a wide selection of sprinkler components. Following are some of the many pre-
cision -made Reliable products that guard life and property from fire around the clock.
• Automatic sprinklers
• Flush automatic sprinklers
• Recessed automatic sprinklers
• Concealed automatic sprinklers
• Adjustable automatic sprinklers
• Dry automatic sprinklers
• Intermediate level sprinklers
• Open sprinklers
• Spray nozzles
• Alarm valves
• Retarding chambers
• Dry pipe valves
• Accelerators for dry pipe valves
• Mechanical sprinkler alarms
• Electrical sprinkler alarm switches
• Water flow detectors
• Deluge valves
• Detector check valves
• Check valves
• Electrical system
• Sprinkler emergency cabinets
• Sprinkler wrenches
• Sprinkler escutcheons and guards
• Inspectors test connections
• Sight drains
• Ball drips and drum drips
• Control valve seals
• Air maintenance devices
• Air compressors
• Pressure gauges
• Identification signs
• Fire department connection
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Association, Factory Mutual
Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Products manufactured and distributed by Reliable have been protecting life and property for over 100 years.
Manufactured by
Reliable Automatic Sprinkler Co., Inc. Recycled
(800) 431-1588 Sales Offices Paper
Reliabld
(800) 848-6051 Sales Fax Revision lines indicate updated or new data.
(914) 829-2042 Corporate Offices
www.reliablesprinkler.com Internet Address EG. Printed in U.S.A. 08/21 P/N 9999970300
UponorAquaPEX®White, coils
Submittal information
Revision M: Sept. 18, 2018
Project information
Job name:
Location: Part no. ordered:
Uponof
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved by:
Technical data
Material: Crosslinked polyethylene PEX-a Engel Method; PEX 5106
Standard grade hydrostatic ratings (PPI): 200°F (93°C) at 80 psi (551 kPa)
180°F (82°C) at 100 psi (689 kPa)
73.4°F (23°C) at 160 psi (1,103 kPa)
'/2", %", 1", 1'/4", 1'/2" and 2" UponorAquaPEX® White only:
---
120°F (49°C) at 130 psi (896 kPa)
Linear expansion rate: 1.1'/10°F/100' (27.94mm/5.56°C/30.48m)
Product information and application use
Uponor AquaPEX White is used for hot and cold domestic potable water distribution and residential fire safety as well
as radiant heating/cooling and hydronic piping systems containing no ferrous corrodible components or where ferrous
components are isolated from the piping.
✓ Description
Part number
I.D.
O.D.
Weight
'/4' Uponor AquaPEX White, 100-ft. coil
F1040250
0.241"
0.375"
4.0 lbs.
Uponor AquaPEX White, 400-ft. coil
F1090375
0.350"
0.500"
20.0 lbs.
Uponor AquaPEX White, 1,000-ft. coil
F1120375
0.350"
0.500"
44.0 lbs.
''/2" Uponor AquaPEX White, 100-ft. coil
F1040500
0.475"
0.625"
6.0 lbs.
%" Uponor AquaPEX White, 300-ft. coil
F1060500
0.475"
0.625"
18.0 lbs.
''/z" Uponor AquaPEX White, 500-ft. coil
F1100500
0.475"
0.625"
27.6 lbs.
''/z" Uponor AquaPEX White, 1,000-ft. coil
F1120500
0.475"
0.625"
54.0 lbs.
Uponor AquaPEX White, 300-ft. coil
F1060625
0.574"
0.750"
28.0 lbs.
Uponor AquaPEX White, 1000-ft. coil
F1120625
0.574"
0.750"
86.0 lbs.
Uponor AquaPEX White, 100-ft. coil
F1040750
0.671"
0.875"
10.0 lbs.
Y44" Uponor AquaPEX White, 300-ft. coil
F1060750
0.671"
0.875"
34.0 lbs.
%" Uponor AquaPEX White, 500-ft. coil
F1100750
0.671"
0.875"
54.0 lbs.
1" Uponor AquaPEX White, 100-ft. coil
F1041000
0.862"
1.125"
20.0 lbs.
1" Uponor AquaPEX White, 300-ft. coil
F1061000
0.862"
1.125"
56.0 lbs.
1" Uponor AquaPEX White, 500-ft. coil
F1101000
0.862"
1.125"
93.0 lbs.
1'/4' Uponor AquaPEX White, 100-ft. coil
F1061250
1.054"
1.375"
34.0 lbs.
1'/4" Uponor AquaPEX White, 300-ft. coil
F1021250
1.054"
1.375"
106.0 lbs.
1'/z" Uponor AquaPEX White, 100-ft. coil
F1061500
1.244"
1.625"
44.0 lbs.
1'/z" Uponor AquaPEX White, 300-ft. coil
F1021500
1.244"
1.625"
133.0 lbs.
2" Uponor AquaPEX White, 100-ft. coil
F1062000
1.629"
2.125"
68.2 lbs.
2" Uponor AquaPEX White, 200-ft. coil
F1052000
1.629"
2.125"
136.4 lbs.
2" Uponor AquaPEX White, 300-fit. coil
F1022000
1.629"
2.125"
204.6 lbs.
2'/i' Uponor AquaPEX White, 100-ft. coil
F1062500
2.011"
2.625"
88.0 lbs.
2'/i' Uponor AquaPEX White, 300-ft. coil
F1022500
2.011"
2.625"
264.0 lbs.
3" Uponor AquaPEX White, 100-ft. coil
F1063000
2.400"
3.125"
128.0 lbs.
3" Uponor AquaPEX White, 300-ft. coil
F1023000
2.400"
3.125"
384.0 lbs.
Installation
Use ProPEX® fittings for %" through 3" pipe.' Refer to the ProPEX Connections Instructional
Guide, Uponor
Piping Pocket Guide,
Plumbing Design Assistance
Manual (PDAM), Complete Design Assistance Manual (CDAM), Hydronic Piping
Design Assistance Manual (HPDAM) or AquaSAFET1A Residential
Fire Sprinkler
Installation Guide for more information.
Listings2
Codes
Standards
cNSFus-fs3; cNSFus-pw; cQAlus P321; UL;
IAPMO; ICC; IPC; IMC; IRC;
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM
CSA; PPI TR-4; ICC-ES; BMEC; CCMC
UPC; UMC; NSPC; HUD;
F2023; ASTM E84; CAN/ULC S102.2; ASTM
E119/UL 263; CAN/ULC S101;
UFGS; NPC of Canada;
ASTM E814/ULC S115;
CSA B137.5; CSA B214;
NBC of Canada
UL 18213; ULC/ORD-C199P3;
AWWA C9044
Related applications Contact information
PEX-a plumbing systems Uponor, Inc. Uponor Ltd.
AquaSAFETM fire safety systems 5925 148"' Street West 6510 Kennedy Road
Radiant heating and cooling systems Apple Valley, MN 55124 USA Mississauga, ON L5T 2X4 CANADA
Hydronic piping systems Phone: 800.321.4739 Phone: 888.994.7726
Fax: 952.891.2008 Fax: 800.638.9517
uponorpro.com uponorpro.com
'ProPEX® is a registered trademark of Uponor, Inc. ProPEX- is a trademark of Uponor Ltd.
2Visit listing agency's website for complete information. 3For 3/4", 1" and 1'W pipe only. 4For %" to 3" pipe.
ProPEX° Ring
Submittal information
Revision I: Nov. 1, 2018
Project information
Job name:
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved by:
Technical data
Material: Engel -method crosslinked polyethylene (PEX-a)
Density: 926 to 940 kg/m3
Degree of crosslinking: 70% to 89%
Product information and application use
Uponor ProPEX® rings are required to make a proper ProPEX connection.' The ProPEX
ring with stop includes a leading edge chamfer and stop edge.
✓ Description Part number
ProPEX Ring, %"
ProPEX Ring with Stop, '/2"
ProPEX Ring with Stop, %"
ProPEX Ring with Stop, 3/4"
ProPEX Ring with Stop, 1"
ProPEX Ring with Stop, 1'/4"
ProPEX Ring with Stop, 1'/2"
ProPEX Ring with Stop, 2"
ProPEX Ring with Stop, 2'/2"
ProPEX Ring with Stop, 3"
Installation
Q4690302
Q4690512
Q4690625
Q4690756
Q4691000
Q4691250
Q4691500
Q4692000
Q4692500
Q4693000
uponof
Length
I.D.
O.D.
Weight
0.54"
0.49"
0.74"
0.005lbs.
0.63"
0.63"
0.87"
0.006lbs.
0.79"
0.75"
1.00"
0.008lbs.
0.87"
0.88"
1.13"
0.012lbs.
1.10"
1.13"
1.42"
0.020lbs.
1.35"
1.38"
1.66"
0.030lbs.
1.61"
1.63"
1.91"
0.040 lbs.
1.97"
2.14"
2.61"
0.133lbs.
2.61"
2.66"
3.25"
0.230lbs.
3.12"
3.16"
3.87"
0.400lbs.
Square cut the Uponor PEX tubing. Remove excess material. Slide the ProPEX ring over the end of the tubing (maximum 'lid' over -hang for rings without stop).
When using the ProPEX ring with stop, slide the ring on the tubing with the chamfered edge first until the end of the tubing contacts the stop edge. Expand the
tubing and ring. If using the ProPEX Manual Expander Tool, rotate the tool a quarter turn after each expansion to prevent the formation of grooves. Remove the
expansion tool and fully seat the tubing and ring against the shoulder of the fitting. Make ProPEX connections at temperatures above 5°F/-15°C. For more
information, refer to the Uponor ProPEX Connections Instructional Guide.
Listings'
cNSFus-fs3; cNSFus-pw; cNSFus-rfh; cQAlus; UL; CSA; PPI TR-4; ICC-ES; IAPMO; BMEC; CCMC; cQAlus P321
Codes
ICC; IPC; IMC; IRC; UPC; UMC; NSPC; HUD; UFGS; NPC of Canada; NBC of Canada
Standards
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM F2023; ASTM E84; CAN/ULC S102.2; ASTM E119/UL 263; CAN/ULC S101; ASTM
E814/ULC S115; CSA 13137.5; CSA B214; UL 18213; ULC/ORD-C199P3
Related applications Contact information
PEX-a plumbing systems
Uponor Inc.
Uponor Ltd.
AquaSAFE fire safety systems
5925 148"' Street West
6510 Kennedy Road
Hydronic radiant heating and cooling systems
Apple Valley, MN 55124 USA
Mississauga, ON L5T 2X4 CANADA
Snow melting systems
Phone: 800.321.4739
Phone: 888.994.7726
Turf conditioning systems
Fax: 952.891.2008
Fax: 800.638.9517
Permafrost prevention systems
uponorpro.com
uponorpro.com
'ProPEX® is a registered trademark of Uponor, Inc. ProPEXT" is a trademark of Uponor Ltd.
2Visit listing agency's website for complete information; 3For '/2",'/", 1", 11/", 1'/2" and 2" tubing only
ProPEXO Engineered
Submittal information
Revision H: May 23, 2019
Project information
Job name:
Polymer (EP) Tee
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved bv:
Technical data
Material: Engineered polymer (EP)
Maximum temperature (no pressure): 320°F (160°C)
Maximum working temperature/pressure: 210*F (99*C) at 150 psi (1,034 kPa)
Product information and application use
ProPEX® engineered polymer (EP) tees make diverting connections for Uponor crosslinked
polyethylene (PEX-a)tubing for use in hot and cold domestic potable water systems,
residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each
end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor
AquaPEX® or Wirsbo hePEXTM tubing.'
Note: Branch size is listed last in the part descriptions.
Uponof
Part
✓
Equivalent Equivalent
cv
cv
Description
number
A B Weight
length (ft.) length (ft.)
through
branch
through branch
ProPEX EP Tee, ''M." PEX x'/z' PEX x'/" PEX Q4755060
2.50" 1.53" 0.02 lbs.
1.0 6.3
7.7
3.4
ProPEX EP Tee, %" PEX x'/:' PEX x'/:' PEX* Q4757575
3.30" 1.94" 0.05 lbs.
1.5 15.6
15.7
5.4
ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX* Q4751010
4.10" 2.47" 0.07 lbs.
1.3 12.7
30.5
11.3
ProPEX EP Tee, 1'/4" PEX x 1'/4" PEX x 1'/4" PEX* Q4751313
4.80" 3.22" 0.15 lbs.
3.8 8.6
34.0
23.9
ProPEX EP Tee, 1 Yz' PEX x 1'/." PEX x 1'M." PEX Q4751515
5.80" 3.82" 0.25 lbs.
1.8 10.6
63.7
31.0
ProPEX EP Tee, 2" PEX x 2" PEX x 2" PEX Q4752000
7.45" 4.79" 0.38 lbs.
0.8 15.5
150.7
52.5
ProPEX EP Tee, 21/' PEX x 21/z' PEX x 21/z' PEX Q4752500
10.56" 5.45" 1.14 lbs.
2.7 22.3
197.2
81.5
ProPEX EP Tee, 3" PEX x 3" PEX x 3" PEX Q4753000
12.26" 6.37" 1.86 lbs.
2.8 23.9
286.6
122.8
Installation
Use the appropriate ProPEX Ring for PEX-a tubing. Refer to the Uponor Professional Plumbing Installation Guide, AquaSAFET"^ Residential Fire
Sprinkler Installation
Guide or Uponor Radiant Installation Handbook for additional information.
Standards
ASTM E84; ASTM E119; ASTM E814; ASTM F877; ASTM F1960; CAN/CSA B137.5; NSF 14; NSF 61
Codes
IBC; IMC; IPC; IRC; NPC of Canada; NSPC; UMC; UPC
Listings
cNSFus-pw; *cNSFus-pw-fs; cQAlus P321; HUD MR 1269; ICC-ES-PMG-1006; ICC-ES-PMG-1012; *UL 1821; *ULC/ORD-C199P; U.P. Code
Related applications
Contact information
PEX-a plumbing systems
Uponor, Inc.
Uponor Ltd.
Hydronic radiant heating and cooling systems
5925 148t' Street West
6510 Kennedy Road
Snow and ice melting systems
Apple Valley, MN 55124 USA Mississauga, ON L5T 2X4 CANADA
Turf conditioning systems
Phone: 800.321.4739
Phone: 888.994.7726
Permafrost prevention systems
Fax: 952.891.2008
Fax: 800.638.9517
AquaSAFETm fire safety systems
uponorpro.com
uponorpro.com
'ProPEX® is a registered trademark of Uponor, Inc. ProPEXT" is a trademark of Uponor Ltd.
ProPEX° Engineered Polymer (EP) Reducing Tee (up to 11/2") uponof
Submittal information
Revision I: Sept. 16, 2019
Project information
Job name:
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved by:
Technical data
Material: Engineered polymer (EP) n�
Maximum temperature (no pressure): 320°F (160°C)
Max. working temperature/pressure: 210°F (99°C) at 150 psi (1,034 kPa)
Product information and application use
ProPEX® engineered polymer (EP) reducing tees make diverting connections for Uponor PEX-a pipe for use in hot and cold B
domestic potable water systems, residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each
end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX11 or Wirsbo hePEXTM
pipe.' Note: Branch size is listed last in the part descriptions.
✓ Description
Part
A
B
Weight
Equiv, length (ft.)
Equiv. length
Cv
Cv
number
through
(ft.) branch
through
branch
ProPEX EP Reducing Tee,''/2" PEX x'/i' PEX x %" PEX
Q4755575
2.86"
1.76"
0.03 lbs.
1.0
15.6
7.7
5.4
ProPEX EP Reducing Tee, '/<" PEX x'/i' PEX x'/i' PEX
Q4757555
3.10"
1.70"
0.04 lbs.
3.5
6.4
4.6
3.4
ProPEX EP Reducing Tee, '/<" PEX x'/z' PEX x'/;' PEX*
Q4757557
3.10"
1.94"
0.04 lbs.
2.3
16.1
5.4
5.4
ProPEX EP Reducing Tee, '/<" PEX x'/;' PEX x PEX
Q4757563
3.30"
1.85"
0.05 lbs.
N/A
N/A
N/A
N/A
ProPEX EP Reducing Tee, '/<" PEX x'/;' PEX x'/z' PEX*
Q4757550
3.30"
1.70"
0.04 lbs.
2.0
7.6
14.2
3.1
ProPEX EP Reducing Tee, '/<" PEX x'/;' PEX x 1" PEX*
Q4757710
3.64"
2.32"
0.08 lbs.
1.5
5.7
15.7
8.7
ProPEX EP Reducing Tee, 1" PEX x'/i' PEX x 1" PEX
Q4751501
3.71"
2.43"
0.09 lbs.
1.98
9.7
12.3
5.7
ProPEX EP Reducing Tee, 1" PEX x'/d' PEX x'/ PEX
Q4751750
3.65"
1.96"
0.07 lbs.
2.27
6.69
3.1
13.2
ProPEX EP Reducing Tee, 1" PEX x'/<" PEX x'/4" PEX*
Q4751775
3.90"
2.24"
0.08 lbs.
2.4
16.7
12.8
5.3
ProPEX EP Reducing Tee, 1" PEX x'/<" PEX x 1" PEX*
Q4751751
3.90"
2.47"
0.08 lbs.
2.4
15.1
12.9
10.5
ProPEX EP Reducing Tee, 1" PEX x'/;' PEX x 1%" PEX
Q4751753
4.15"
2.95"
0.12 lbs.
2.74
19.48
14.7
12.0
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x'/;' PEX*
Q4751150
4.10"
2.00"
0.08 lbs.
1.2
6.5
32.2
3.4
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x %" PEX*
Q4751175
4.10"
2.24"
0.09 lbs.
1.7
6.4
27.8
8.2
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 1 '/;' PEX*
Q4751113
4.38"
2.95"
0.13 lbs.
6.52
5.37
15.0
28.0
ProPEX EP Reducing Tee, 1%" PEX x'/<" PEX x'/<" PEX*
Q4751377
4.11"
2.38"
0.09 lbs.
2.74
7.41
7.3
12.0
ProPEX EP Reducing Tee, 1%" PEX x'/<" PEX x 1" PEX*
Q4751371
4.37"
2.62"
0.11 lbs.
2.70
7.59
13.9
12.1
ProPEX EP Reducing Tee, 1%" PEX x'/<" PEX x 1Y<" PEX*
Q4751373
4.61"
2.88"
0.13 lbs.
2.74
11.91
18.8
12.0
ProPEX EP Reducing Tee, 1'/<" PEX x 1" PEX x %" PEX*
Q4751317
4.50"
2.73"
0.11 lbs.
3.4
5.2
21.0
9.3
ProPEX EP Reducing Tee, 11/;' PEX x 1" PEX x 1" PEX*
Q4751311
4.70"
2.97"
0.12 lbs.
11.0
23.0
11.7
8.4
ProPEX EP Reducing Tee, 11/;' PEX x 11/4" PEX x'/;' PEX*
Q4751350
4.40"
2.15"
0.10 lbs.
1.9
3.9
45.2
4.1
ProPEX EP Reducing Tee, 11/4" PEX x 11/4" PEX x %" PEX*
Q4751337
4.70"
2.73"
0.13 lbs.
2.3
5.7
43.4
8.9
ProPEX EP Reducing Tee, 11/4" PEX x 11/4" PEX x 1" PEX*
Q4751331
5.00"
2.97"
0.14 lbs.
4.2
6.3
33.0
15.8
ProPEX EP Reducing Tee, 1'/z" PEX x'/<" PEX x %" PEX
Q4751577
4.37"
2.64"
0.13 lbs.
2.88
7.41
7.3
11.7
ProPEX EP Reducing Tee, 1'/z" PEX x'/<" PEX x 1'/z" PEX
Q4751575
4.97"
3.39"
0.19 lbs.
2.74
19.10
22.9
12.0
ProPEX EP Reducing Tee, 1'/z" PEX x 1" PEX x %" PEX
Q4751517
5.25"
3.06"
0.17 lbs.
4.0
5.1
19.5
9.3
ProPEX EP Reducing Tee, 1'/z" PEX x 1" PEX x 1" PEX
Q4751511
5.25"
3.30"
0.18 lbs.
4.3
6.5
18.9
15.6
ProPEX EP Reducing Tee, 11/2" PEX x 1" PEX x 11/2" PEX
Q4751505
5.40"
3.45"
0.20 lbs.
4.2
14.9
19.0
26.5
ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x %" PEX
Q4751537
5.50"
2.65"
0.18 lbs.
4.2
11.3
33.1
6.3
ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x 1" PEX
Q4751531
5.50"
2.85"
0.19 lbs.
3.1
13.1
36.4
11.2
ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x 11/4" PEX
Q4751533
5.50"
3.15"
0.21 lbs.
2.0
17.7
45.4
17.0
ProPEX EP Reducing Tee, 1'/z" PEX x 1'/2" PEX x'/i' PEX
Q4751550
4.95"
2.30"
0.14 lbs.
2.4
6.3
60.5
3.4
ProPEX EP Reducing Tee, 1'/z" PEX x 1'/2" PEX x %" PEX
Q4751557
5.30"
3.06"
0.20 lbs.
2.9
5.4
56.0
9.0
ProPEX EP Reducing Tee, 1'/2" PEX x 1'/2" PEX x 1" PEX
Q4751551
5.75"
3.30"
0.21 lbs.
3.1
6.9
53.8
15.3
ProPEX EP Reducing Tee, 1'/2" PEX x 1'/2" PEX x 11/4" PEX
Q4751553
5.80"
3.56"
0.22 lbs.
3.2
4.1
54.3
33.7
Installation
Use the appropriate ProPEX ring for PEX-a pipe. Refer to the Uponor Piping Systems
Installation
Guide,
the AquaSAFETm Residential Fire
Sprinkler Installation Guide or the Uponor
Radiant Installation Handbook for additional information.
Standards Codes
Listings
ASTM E84; ASTM E119; ASTM E814; IBC; IMC; IPC; IRC;
NPC of Canada;
cNSFus-pw; *cNSFus-pw-fs;
cQAlus P321;
HUD MR 1269; ICC-ES-PMG-1006;
ASTM F877; ASTM F1960; NSPC; UMC; UPC
ICC-ES-PMG-1012;
*UL 1821; *ULC/ORD-C199P; U.P. Code
CAN/CSA B137.5; NSF 14; NSF 61
Related applications
Contact information
PEX-a plumbing systems
Uponor Inc.
Uponor Ltd.
Hydronic radiant heating and cooling systems
5925 1481h Street West
6510 Kennedy Road
Snow and ice melting systems
Apple Valley,
MN 55124
USA
Mississauga, ON L5T 2X4
CANADA
Turf conditioning systems
Phone: 800.321.4739
Phone: 888.994.7726
Permafrost prevention systems
Fax: 952.891.2008
Fax: 800.638.9517
AquaSAFETM fire safety systems
uponorpro.com
uponorpro.com
'ProPEX® is a registered trademark of Uponor Inc. ProPEX" is a trademark of Uponor Ltd.
ProPEX® Engineered Polymer (EP) Elbow
Submittal information
Revision J: June 21, 2019
Project information
Job name:
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: ADDroved bv:
Technical data
Material: Engineered polymer (EP)
Maximum temperature (no
pressure): 320°F (160°C)
Maximum working
temperature/pressure: 210°F (99°C) at 150 psi (1,034 kPa)
Product information and application use
ProPEX® engineered polymer (EP) elbows make 90-degree connections for Uponor
crosslinked polyethylene (PEX-a) tubing for use in hot and cold domestic potable water
systems, residential fire safety and hydronic radiant heating and cooling systems. Each end
of the elbow is manufactured with an Uponor ProPEX fitting for connections to Uponor
AquaPEX® or Wirsbo hePEXTm tubing.'
Uponof
✓ Description
Part number
A
B
Weight
Equivalent
Cv
length (ft.)
ProPEX EP Elbow, '/z" PEX x'/z" PEX
Q4760500
1.30"
1.30"
0.02 lbs.
10.4
2.6
ProPEX EP Elbow, 3/4° PEX x 3/4" PEX*
Q4760750
1.60"
1.60"
0.03 lbs.
10.8
6.7
ProPEX EP Elbow, 1" PEX x 1" PEX*
Q4761000
2.10"
2.10"
0.07 lbs.
11.5
11.9
ProPEX EP Elbow, 1'/4" PEX x 1'/4" PEX*
Q4761250
2.45"
2.45"
0.11 lbs.
10.0
22.2
ProPEX EP Elbow, 1'/z" PEX x 1'/z" PEX
Q4761500
2.77"
2.77"
0.18 lbs.
11.5
29.7
ProPEX EP Elbow, 2" PEX x 2" PEX
Q4762000
3.76"
3.76"
0.30 lbs.
17.1
50.2
ProPEX EP Elbow, 2'/z" PEX x 2'/z" PEX
Q4762500
4.93"
4.93"
0.85 lbs.
20.0
86.0
ProPEX EP Elbow, 3" PEX x 3" PEX
Q4763000
5.88"
5.88"
1.44 lbs.
23.2
125.0
ProPEX EP 45 Elbow, 1'/2' PEX x 1'/2" PEX
Q4761515
2.32"
2.32"
0.13 lbs.
9.3
33.1
ProPEX EP 45 Elbow, 2" PEX x 2" PEX
Q4762020
2.91"
2.91"
0.32 lbs.
8.8
68.9
ProPEX EP 45 Elbow, 2'/2' PEX x 2'/2" PEX
Q4762525
3.83"
3.83"
0.65 lbs.
7.0
136.8
ProPEX EP 45 Elbow, 3" PEX x 3" PEX
Q4763030
4.48"
4.48"
1.07 lbs.
8.3
195.5
Installation
Use the appropriate ProPEX ring for PEX-a tubing. Refer to the Uponor Piping
Pocket Guide,
AquaSAFETm
Residential Fire Sprinkler Installation Guide
or Uponor
Radiant Installation Handbook for additional information.
Standards
ASTM E84; ASTM E119; ASTM E814; ASTM F877; ASTM F1960; CAN/CSA B137.5; NSF
14; NSF 61
Codes
IBC; IMC; IPC; IRC; NPC of Canada; NSPC; UMC; UPC
Listings
cNSFus-pw; *cNSFus-pw-fs; cQAlus P321; HUD MR 1269; ICC-ES-PMG-1006; ICC-ES-PMG-1012; *UL 1821; *ULC/ORD-C199P; U.P. Code
Related applications Contact information
PEX-a plumbing systems
Uponor Inc.
Uponor Ltd.
Hydronic radiant heating and cooling systems
5925 148t' Street West
6510 Kennedy Road
Snow and ice melting systems
Apple Valley, MN 55124 USA
Mississauga, ON L5T 2X4 CANADA
Turf conditioning systems
Phone: 800.321.4739
Phone: 888.994.7726
Permafrost prevention systems
Fax: 952.891.2008
Fax: 800.638.9517
AquaSAFE fire safety systems
uponorpro.com
uponorpro.com
1 ProPEX® is a registered trademark of Uponor, Inc. ProPEX- is a trademark of Uponor Ltd.
ProPEX° Fire Sprinkler Adapter
Submittal Information
Revision B: March 17, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer's Representative: Approved By:
Technical Data
Material: 300 Series Stainless Steel
Product Information and Application Use
Use the ProPEX° Fire Sprinkler Adapter in conjunction with the
appropriate sprinkler to provide a multi -purpose residential fire
sprinkler system'. For residential applications, the system is
installed with the cold -potable portion of the Uponor plumbing
system. Make connections with Uponor ProPEX fittings. These
fittings are designed for use only with 3/4" or 1" AquaPEX°
White tubing in the Uponor AQUASAFE° Looped System.
uponof
✓ Description Part A B C D E Weight
Number
ProPEX Fire Sprinkler Adapter, 3/4" PEX x 1/2" FNPT Q7517550 0.75" 1.88" 2.50" 1.82" 1.41" 0.268 lbs.
ProPEX Fire Sprinkler Adapter, 1" PEX x 1/2" FNPT Q7511050 0.75" 1.88" 2.50" 2.06" 1.54" 0.408 lbs.
Installation
Use appropriate ProPEX Ring for connecting the tubing. Refer to the AquaPEX Installation Handbook or the Uponor AQUASAFE°
Installation Guide for additional information.
Standards
CAN/CSA B137.5; ASTM F877; ASTM F 1960
Codes
IPC; UPC; NSPC; IRC; IMC; NPC of Canada
Listings
ANSI/NSF 14- and 61-certified; U.P. Code; ICC ESR 1099; HUD MR 1269; UL 1821; ULC/ORD - C 199 P
Related Applications
PEX-a Plumbing Systems
AQUASAFE Fire Safety Systems
Contact Information
Uponor, Inc.
5925 1481h Street West
Apple Valley, MN 55124 USA
Phone: (800) 321-4739
Fax: (952) 891-2008
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: (888) 994-7726
Fax: (800) 638-9517
www.uponor.ca
'ProPEX° is a registered trademark of Uponor, Inc. ProPEXTM is a trademark of Uponor Ltd.
Bulletin 033 February 2019
Rellablia
Model 171 RES LL
Residential Sprinklers
Specifically Listed for use in Multipurpose Systems that serve both
domestic water and fire protection.
Types:
1. F1 Res 30 LL Pendent
2, F1 Res 30 LL Recessed Pendent/F2
3, F1 Res 30 LL Recessed Pendent/FP
4. F1 Res 49 LL Pendent
5. F1 Res 49 LL Recessed Pendent/F1
6. F1 Res 49 LL Recessed Pendent/FP
7. F1 Res 58 LL Pendent
8. F1 Res 58 LL Recessed Pendent/F1
9. F1 Res 58 LL Recessed Pendent/FP
10. F1 Res 30 LL CCP Pendent
11. F1 Res 49 LL CCP Pendent
12. F1 Res 58 LL CCP Pendent
13. F1 Res 44 LL HSW
14. F1 Res 44 LL Recessed HSW/F2
15. F1 Res 58 LL HSW
16. F1 Res 58 LL HSW Recessed HSW/F2
17. F1 Res 44 LL SWC
Pendent/F1, F1 Res 30 LL
Recessed Pendent/F2
Listings & Approvals
1. Listed by Underwriters Laboratories Inc. and
UL Certified for Canada (cULus) for Safety to ANSI/
U L 1626.
2. Certified by Underwriters Laboratories, Inc. and Under-
writers Laboratories of Canada for Health Effects to NSF/
ANSI Standard 61 Annex G (Less than 0.25% Lead Con-
tent,)
3, WaterMark certified. WaterMark Certificate Number
23347
Additional Bulletins applicable to all
F1 RES LL Sprinklers
• Wall Wetting - Bulletin 007
• Design and Installation - Bulletin 140
UL Listing Category
Residential Automatic Sprinkler
UL Guide Number
VKKW
Patents
US Patent No. 6,516,893 applies to the
Model F1 Res 49 LL & 58 LL Pendent Sprinklers
Other patents pending.
LL Recessed Pendent/FP
11
Pendent
11
CCP Pendent
HSW Recessed HSW/F2 SWC
Product Description
Model F1 Res LL Pendent sprinklers (Figs. 1, 2, 3, & 4) are
fast response sprinklers combining excellent durability, high
sensitivity glass -bulb and low profile decorative design. The
F1 Res LL Horizontal Sidewall sprinklers (Figs. 5, & 6) are
equally attractive when above ceiling piping cannot be used.
The 3mm glass -bulb pendent sprinklers permit the efficient
use of residential water supplies for sprinkler coverage in resi-
dential fire protection design.
The low flow F1 Res LL sprinklers are specially engineered
for fast thermal response to meet the sensitive fire protection
application needs of the latest residential market standards
(UL 1626 Standard). Upon fire conditions, rising heat causes
a sprinkler's heat -sensitive glass -bulb to shatter, releasing the
waterway for water flow onto the deflector, evenly distributing
the discharged water to control a fire.
Technical Data:
• Thermal Sensor: Nominal 3mm glass -bulb
• Sprinkler Frame : Brass
• Sprinklers' Pressure Rating : 175 psi
Factory Hydrostatically Tested to 500 psi
• Thread Size: 1/2" NPT (R1/2)
• K-Factor: 3.0 (Actual) - F1 Res 30 LL Pendent Sprinkler
4.9 (Actual) - F1 Res 49 LL Pendent Sprinkler
5.8 (Actual) - F1 Res 58 LL Pendent & HSW Sprinkler
4.4 (Actual) - F1 Res 44 LL HSW Sprinkler
Cj
m
0
W
co
CD
71
0
z.
Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Application
Model F1 Res LL sprinklers are cULus Listed in accor-
dance with UL 1626 for installation in accordance with
NFPA 13, NFPA 13R, and NFPA 13D. Sprinkler systems
using Model F1 Res LL sprinklers must be hydraulically
designed to provide at least the flow identified in the Tech-
nical Data tables in this bulletin. For NFPA 13 installations,
the flow per sprinkler must be the greater of: (1) the flow
listed in the applicable Technical Data table and (2) the
flow required to achieve a minimum design density of 0.1
gpm/sq ft over the design area of the sprinkler. For cover-
age area dimensions less than those listed in the Technical
Data tables, use the minimum required flow for the next
larger max. coverage area listed.
• Model F1 Res 30 LL, 49 LL & 58 LL Pendent
135FG03
Fig. 1
Installation
Models F1 Res LL sprinklers are to be installed as shown,
Model F1, F2 and FP Escutcheons, illustrated herewith, are
the only recessed escutcheons to be used with Model F1
Res LL sprinklers, Use of any other recessed escutcheon
will void all approvals and warranties. For installing Model
F1 Res LL Pendent sprinklers use only the Model W2 sprin-
kler Wrench; for installing Models F1 Res LL Recessed
• Model F1 Res 30 LL Recessed Pendent / F2
• Model F1 Res 49 LL & 58 LL Recessed Pendent / F1
2 1/4" HDLE DIA.
[51.2mm]
1 IS/I6" DIA.
[49.2mm]
f/
- 1"X 1/2" REDUCER
TURN COLLAR UNTIL
TIGHT AGAINST SPRINKLER
WRENCH BOSS. I I
FACE OF FITTING TO
CEILING DIMENSION:
TJT�/ 3/I6-15/16 (F1 ESCUTCHEON)
3/16-11/16 (F2 ESCUTCHEON)
ADIUSTMENT ®���
I
[3�2mmJ
A"
135FGO2A 2 27/32" Du.
[7z2mm]
Pendent, CCP & SWC sprinklers use only the Model GFR2
sprinkler wrench; for installing Model F1 LL Res Recessed
HSW sprinklers use only the Model GFR2 Sprinkler Wrench.
Use of wrenches other than those specified may damage
these sprinklers. Install F1 Res 44 LL with a ceiling to de-
flector distance of 4" - 12". Flow arrow on deflector must
point away from near wall and "Top" marking must face
ceiling.
Fig. 2
Escutcheon*, F1 or F2, Data:
Adjustment
„A„
Face of fitting
Type
Inch (mm)
Inch (mm)
to ceiling
Inch (mm)
F1
3/4 (19.0)
Min.=3/4" (19.1)
3/16 - 15/16
Max. =11/2" (38.1)
(4.7 - 24.0)
F2
1/2 (12.7)
Min.=15/16" (23.8)
3/16 - 11/16
Max. =11/2" (38.1)
(4.7 - 17.4)
* Note: Escutcheons F1 or F2 may be used with
Model F1 Res 49 LL & 58 LL Recessed Pendent Sprinkler
2.
Technical Data: F1 Res 30 LL Pendent and Recessed Pendent (SIN RA3311)
Thread
Size
Nominal Orifice
Inch mmpsi(bar)
Max. Pressure
Sprinkler Temp. Rating
Max. Ambient Temp.
Actual K
Factor
Sprinkler Length
Inch mm
OF
°C
OF
°C
1/2" NPT
21/64" (8.2)
175 (12)
155
68
100
38
3.0 (43.2)
2.25 (57)
R1/z
175
79
Max.
Ordinary Temp. Rating
Intermediate Temp. Rating
Minimum
Max. Coverage area
Spacing
155°F/68°C
175°F/79°C
Top of Deflector to Ceiling
Spacing
Flow
Pressure
Flow
Pressure
Ft x Ft (m x m)
Inch (mm)
Ft (m)
GPM (L/min)
PSI(bar)
GPM (L/min)
PSI(bar)
Ft (m)
12 x 12 (3.6 x 3.6)
12(3.6)
8(30.3)
7.0 (0.48)
8(30.3)
7.0 (0.48)
Smooth Ceilings 1" to 4"
(25mm to 100mm)
Beamed Ceilings per NFPA 13,
13D, or 13R
8(2.4)
14 x 14 (4.3 x 4.3)
14(4.3)
10 (37.8)
11 (0.76)
10 (37.8)
11 (0.76)
16 x 16 (4.9 x 4.9)
16(4.9)
13 (49)
18.8 (1.3)
13 (49)
18.8 (1.3)
Technical Data: F1 Res 49 LL Pendent and Recessed Pendent (SIN RA3316)
Thread
Nominal Orifice
Max.
Sprinkler
Max.
Actual
Sprinkler
Size
Inch (mm)
Pressure
Tem . Ratin
°F °C
Ambient Temp.
K
Length
OF
°C
psi bar
155 68
Factor
Inch mm
1/2" NPT
7/16" (11)
175 (12)
100
38
4.9 (70.6)
2.25 (57)
RYz
175 79
150
66
Ordinary Temp.
Rating
Intermediate
Temp. Rating
Top of Deflector
Minimum
Max. Coverage area
Max. Spacing
155°F/680C
175°F/790C
to Ceiling
Spacing
Flow
Pressure
Flow
Pressure
Ft x Ft (m x m)
Ft (m)
(mm)
Ft (m)
GPM min
PSI a
GPM min
PSI(bar)Inch
Smooth Ceilings 1" to 4"
(25mm to 100mm)
8(2.4)
12 x 12 (3.6 x 3.6)
12(3.6)
13 (49)
7.0 (0.48)
13 (49)
7.0 (0.48)
14 x 14 (4.3 x 4.3)
14(4.3)
13 (49)
7.0 (0.48)
13 (49)
7.0 (0.48)
16 x 16 (4.9 x 4.9)
16(4.9)
13 (49)
7.0 (0.48)
13 (49)
7.0 (0.48)
Beamed Ceilings per NFPA
13, 13D, or 13R
18 x 18 (5.5 x 5.5)
18(5.5)
17 (64.3)
12 (0.83)
17 (64.3)
12 (0.83)
20 x 20 (6.1 x 6.1)
20(6.1)
20 (75.7)
16.7 (1.14)
20 (75.7)
16.7 (114)
Max. Coverage area
Ft x Ft (m x m)
Max. Spacing
Ft (m)
Ordinary Temp. Rating
155°F/68°C(175'F/79'C)
Intermediate Temp. Rating
Top of Deflector
to
In Ceiling
(mm)
Minimum
Spacing
Ft (m)
Flow
GPM min
Pressure
PSI
Flow
GPM min
Pressure
PSI(badInch
12 x 12 (3.6 x 3.6)
12(3.6)
15 (57)
9.4 (0.65)
15 (57)
9.4 (0.65)
Smooth Ceilings 4" to 8"
(100mm to 200mm)
8(2.4)
14 x 14 (4.3 x 4.3)
14(4.3)
16 (60.5)
10.6 (0.73)
16 (60,5)
10.6 (0.73)
16 x 16 (4.9 x 4.9)
16(4.9)
17 (64.3)
12.0 (0.83)
17 (64.3)
12.0 (0.83)
18 x 18 (5.5 x 5.5)
18(5.5)
19 (72)
15.0 (1.0)
19 (72)
15.0 (1.0)
20 x 20 (6.1 x 6.1)
20(6.1)
22 (83.2)
20.2 (1.4)
22 (83.2)
20.2 (1.4)
3.
Technical Data: F1 Res 58 LL Pendent and Recessed Pendent (SIN RA3313)
Thread
Nominal Orifice
Max.
Sprinkler
Max.
Actual
Sprinkler
Size
Inch (mm)
Pressure
Temp. Ratin
Ambient Temp.
K Factor
Length
OF
°C
°F
°C
psi (bar)
Inch (mm)
1/2" NPT
1/2" (13)
175 (12)
155
68
100
38
5.8 (83.5)
2.25 (57)
(R1/2)
175
79
150
66
Ordinary Temp. Rating
Intermediate Temp. Rating
Top of Deflector
Minimum
Max. Coverage area
Max. Spacing
155°F/680C
1750F/790C
Ceiling
Spacing
Flow
Pressure
Flow
Pressure
Ft x Ft (m x m)
Ft (m)
In (mm)
Ft (m)
GPM min
PSI a
GPM Umin
PSI(bar)Inch
12 x 12 (3.6 x 3.6)
12(3.6)
16 (61)
7.6 (0.53)
16 (61)
7.6 (0.53)
Smooth Ceilings 1" to 4"
(25mm to 100mm)
8(2.4)
14 x 14 (4.3 x 4.3)
14(4.3)
16 (61)
7.6 (0.53)
16 (61)
7.6 (0.53)
16 x 16 (4.9 x 4.9)
16(4.9)
16 (61)
7.6 (0.53)
16 (61)
7.6 (0.53)
Beamed Ceilings per NFPA 13,
13D, or 13R
18 x 18 (5.5 x 5.5)
18(5.5)
19 (72)
10.8 (0.75)
19 (72)
10.8 (0,75)
20 x 20 (6.1 x 6.1)
20(6.1)
22 (83,3)
14.4 (1.0)
22 (83.3)
14.4 (1.0)
• Model F1 Res 30 LL, 49 LL & 58
1 1 f! D 0--A-n+
2 518" [66.7mml DIA.
2 5116" DIA. HOLE IN CEILING
[58.7mm]
CUP V
1 "x1/2" REDUCER
CUP /
CEILING
1 114» [31.5mm]
WStltl MAX. FACE OF FITTING
TO FACE OF CEILING
DIMENSION
A» B'
COVER ADJUSTMENT HEIGHT
3 5116» DIA.
135FG04D [84.1 mm]
Fig. 3
• Model F1 Res 30 LL, 49 LL & 58
LL RP_CP_CCPrI PPnr1pnt / FP
rr pusn-on/tnreaa-OTT escutcneon
2 5/8" DIA. [66.7mm]
HOLE IN CEILING
2 5/16" DIA.
[58.7mm]
CUP
/
I �
1" X 1/2" REDUCER
I
1 I
I
L J
CEILING
®.iPV01
dd�� MM tltl
1 1/2" [38.1mm] MAX.
FACE OF flTTING
--
-
TO FACE OF CEILING
��
DIMENSION
J_
1/2" [13mm] MAX
\
FP ADJUSTMENT
A
IJ5FG01A
Fig. 4
4
Technical Data: F1 Res 30 LL CCP Pendent and Recessed Pendent/FP (SIN RA3311)
Thread
Nominal
Max.
CCP Assembly
Max.
K
Sprinkler
Size
Orifice
Pressure
Tem . atin
Ambient Temp.
Factor
Length
°C
OF
oC
Inch mm
psi (bar)OF
Inch mm
1/2" NPT
(RI/2)
"/64" (8.2)
175 (12)
135
57
100
38
3.0 (43.2)
2.25 (57)
Max. Coverage area
Ft x Ft (m x m)
Max. Spac-
ing Ft (m)
Ordinary Temp. Rating
155°F/68°C
Top of Deflector to Ceiling
Inch (mm)
Minimum
Spacing
Ft (m)
Flow
GPM (Vmin)
Pressure
PSI bar
12 x 12 (3.6 x 3.6)
12(3.6)
8(30.3)
7.0 (0.48)
Smooth Ceilings 1/2" to 1"
(13mm to 25mm) using CCP or FP escutcheon
8(2.4)
14 x 14 (4.3 x 4.3)
14(4.3)
11 (37.8)
13.4 (0.92)
Beamed Ceilings per NFPA 13, 13D, or 13R
Technical Data: F1 Res 49 LL CCP Pendent and Recessed Pendent/FP (SIN RA3316)
Thread
Nominal
Max.
CCP Assembly
Max.
K
Sprinkler
Size
Orifice
Pressure
Temp. RatingAmbient
Temp.
Factor
Length
OF
°C
OF
oC
Inch (mm)
psi (bar)
Inch (mm)
1/2" NPT
(R'/2 )
7/16" (11)
175 (12)
135
57
100
38
4.9 (70.6)
2.25 (57)
Max. Coverage
Ordinary Temp.
Rating
Minimum
ea
Max. Spacing
(155°F/68°C)
Top of Deflector to Ceiling
Spacing
Flow
Pressure
Ft x Ftr(m x m)
Ft (m)
Inch (mm)
(m)g
12(3.6)
GPM (Vmin)
PSI (bar)
Smooth Ceilings 1/2" to 1"
(13mm to 25mm) using CCP or FP
8(2.4)
12 x 12 (3.6 x 3.6)
13 (49)
7.0 (0.48)
14 x 14 (4.3 x 4.3)
14(4.3)
13 (49)
7.0 (0.48)
16 x 16 (4.9 x 4.9)
16(4.9)
14 (53)
8.2 (0.56)
escutcheon
Beamed Ceilings per NFPA 13, 13D, or 13R
18 x 18 (5.5 x 5.5)
18(5.5)
18 (68.1)
13.5 (0.93)
20x20(6.1 x6.1)
20(6.1)
20(75.7)
16.7(1.14)
Note: Sprinklers shown in Fig. 3 and Fig. 4 are not suitable for installation in ceilings which have positive pressure in
the space above.
Technical Data: F1 Res 58 LL CCP Pendent and Recessed Pendent/FP (SIN RA3313)
Thread
Nominal
Max.
CCP Assembly
Max.
K
Sprinkler
Size
Orifice
Pressure
Temp. Ratin
Ambient Temp.
Factor
Length
OF
°C
OF
OC
Inch (mm)
psi (bar)
Inch (mm)
1/2" NPT
(R'/2 )
1/2" (13)
175 (12)
135
57
100
38
5.8 (83.5)
2.25 (57)
Max. Coverage
Ordinary Temp. Rating
Minimum
area
Max. Spacing
(155°F/68°C)
Top of Deflector to Ceiling
Spacing
Flow
Pressure
Ft x Ft (m x m)
Ft (m)
Inch (mm)
(m)
GPM (Vmin
PSI(bar)Ft
12 x 12 (3.6 x 3.6)
12(3.6)
16 (61)
7.6 (0.53)
14 x 14 (4.3 x 4.3)
14(4.3)
16(61)
7.6(0.53)
Smooth Ceilings 1/2" to 1"
16 x 16 (4.9 x 4.9)
16(4.9)
16 (61)
7.6 (0.53)
(13mm to 25mm) using CCP or FP escutcheon
Beamed Ceilings per NFPA 13, 13D, or 13R
8(2.4)
18 x 18 (5.5 x 5.5)
18(5.5)
19 (72)
10.8 (0.75)
20 x 20 (6.1 x 6.1)
20(6.1)
22 (83.3)
14.4 (1.0)
5.
rll�"� 1
FACE OF FITTING TO
WALL DIMENSION
1 1/4 ` MIN.
[31.8mm]
2 1/4" HOLE DIA.
1/8 'q"
[57.2mm]
CEILING TO
[3.2mm]
DEFLECTOR
1" X 1/2- REDUCER
DIMENSION
ro�
Illi lip I �--r1
��
IIIIIIII
1 15/16" DIA.
[49.2mm] hill
IIIII
2 27/32" DIA.
IIIII
[72.2mm]
_IlIV
V
TURN COLLAR UNTIL
TIGHT AGAINST SPRINKLER
WRENCH BOSS.
l�
`\
1/2- [13mm]
IJ5FG06-D
ADJUSTMENT
• Model F1 Res 44 LL & 58 LL HSW
(r _
� .' �. ice►
Rom, � •�,,
1
• Model F1 Res 44 LL & 58 LL Recessed HSW/F2
escutcheon, 1 2" (13mm) adjustment
Technical Data: F1 Res 44 LL HSW & HSW/F2 (SIN RA3331)
Nominal
Max.
Sprinkler
Max.
Sprinkler
Thread
Orifice
Pressure
Temp. Rating
Ambient
K
Length
Size
Inch (mm)
psi (bar)
Temp.
Factor
Inch (mm)
of
°C
1/2" NPT
3/8" (10)
175 (12)
155
68
100
38
4.4(63)
2.45 (62)
(R/2)
175
79
150
66
Escutcheon. F2. Data:
Face of
T
Type
Adjustment
to wetting
ll
Inch (mm)
Inch (mm)
F2
1/2 (1 3)
3/16 - 11/16
(4.7 - 17.4)
Max. Coverage area
Ft x Ft (m x m)
Max. Spac-
ing Ft (m)
Ordinary Temp. Rating
(155°F/68°C)
Intermediate
(175°F/79°C)
Temp. Rating
Top of Deflector to
Ceiling
Inch (mm)
4 to 6 (100 to 152)
Minimum
Spacing
Ft (m)
8(2.4)
Flow Pressure
GPM (L/min) PSI (bar)
Flow
GPM (Umin)
Pressure
PSI (bar)
12 x 12 (3.6 x 3.6)
12(3.6)
12 (45.4)
7.5 (0.52)
12 (45.4)
7.5 (0.52)
14 x 14 (4.3 x 4.3)
14(4.3)
14 (53.0)
10.2 (0.71)
14 (53.0)
10.2 (0.71)
16 x 16 (4.9 x 4,9)
16(4.9)
16 (60.6)
13.3 (0.92)
16 (60.6)
13.3 (0.92)
16 x 18 (4.9 x 5.5)
16(4.9)
18 (68.1)
16.8 (0.53)
18 (68.1)
16.8 (0.53)
18 x 18 (5.5 x 5.5)
18(5.5)
19 (72.0)
18.7 (1.29)
19 (72.0)
18.7 (1.29)
16 x 20 (4.9 x 6.1)
16(4.9)
23 (87.1)
27.4 (1.89)
23 (87.1)
27.4 (1.89)
12 x 12 (3.6 x 3.6)
12(3.6)
14 (53.0)
10.2 (0.71)
14 (53.0)
10.2 (0.71)
6 to 12 (152 to 305)
14 x 14 (4.3 x 4.3)
14(4.3)
16 (60.6)
13.3 (0.92)
16 (60.6)
13.3 (0.92)
16 x 16 (4.9 x 4.9)
16(4.9)
17 (64.4)
15.0 (1.04)
17 (64.4)
15.0 (1.04)
16 x 18 (4.9 x 5.5)
16(4.9)
20 (75.7)
20.7 (1.43)
20 (75.7)
20.7 (1.43)
16 x 20 (4.9 x 6.1)
16(4.9)
23 (87.1)
27.4 (1.89)
23 (87.1)
27.4 (1.89)
on
Technical Data: F1 Res 58 LL HSW & HSW/F2 (SIN RA3333)
Thread
Nominal
Max.
Sprinkler
Max.
Ambient
K
Sprinkler
Size
Orifice
Pressure
Temp. Rating
Temp.
Factor
Length
Inch (mm)
psi (bar)
Inch (mm)
OF
°C
°F
°C
1/2" NPT
1/2" (13)
175 (12)
155
68
100
38
5.8 (83.5)
2.45 (62)
(R1/2)
175
79
150
66
Max. Coverage area
Ft x Ft (m x m)
12 x 12 (3.6 x 3.6)
Max. Spacing
Ft (m)
Ordinary Temp.
155°F/68°C
Rating
Intermediate
1750F/79°C
Temp. Rating
Top of Deflector to
Ceiling
Inch (mm)
Minimum
Spacing
Ft (m)
Flow
GPM min)VPSI(bar)--GPM
Pressure
Flow
Vmin
Pressure
PSI ar
12(3.6)
16 (60.6)
7.6 (0.53)
16 (60.6)
7.6 (0.53)
4 to 6 (100 to 152)
8(2.4)
14 x 14 (4.3 x 4.3)
14(4.3)
18 (68.2)
9.7 (0.69)
18 (68.2)
9.7 (0.69)
16 x 16 (4.9 x 4.9)
16(4.9)
21 (79.5)
13.2 (0.91)
21 (79.5)
13.2 (0.91)
16 x 18 (4.9 x 5.5)
16(4.9)
25 (94.7)
18.6 (1.28)
25 (94.7)
18.6 (1.28)
16 x 20 (4.9 x 6.1)
16(4.9)
29 (109.8)
25.0 (1.73)
29 (109.8)
25.0 (1.73)
12 x 12 (3.6 x 3.6)
12(3.6)
22 (83.3)
14.4 (1.0)
22 (83.3)
14.4 (1.0)
6 to 12 (152 to 305)
14 x 14 (4.3 x 4.3)
14(4.3)
22 (83.3)
14.4 (1.0)
22 (83.3)
14.4 (1.0)
16 x 16 (4.9 x 4.9)
16(4.9)
26 (98.4)
20.1 (1.39)
26 (98.4)
20.1 (1.39)
16 x 18 (4.9 x 5.5)
16(4.9)
31 (117.4)
28.6 (1.97)
31 (117.4)
28.6 (1.97)
• Model F1 Res 44 LL SWC
Technical Data: F1 Res 44 LL SWC SIN RA3331
4" to 12"
[101.60mm To
304.80mm]
1
1/4" [31.75mm] Maximum
Face Of Fitting
To Wall Dimension
PUSH ON COVER, THEN
TURN TO ADJUST UNTIL
TIGHT AGAINST WALL.
I" X 1/2" Reducer
id
Recommended
Well Hole
2 5/8"
2 5/16"
[58.74mm]�-tiii - -
-
-
--
[66.68mm]
Dig.
3 5/16"
Dig.
L ignL
, [84.14mm]
/ Dio.
-- _
TURN COLLAR UNTIL
TIGHT AGAINST SPRINKLER
1 21/32
WRENCH BOSS.
[42. 07mm]
IJ5FG07
1/2" [12.70mm]
Adjustment
Fig. 6
Nominal
Max.
Cover
Max.
Sprinkler
Thread
Orifice
Pressure
Temp.
Ambient
K
Length
Size
inch (mm)
psi (bar)
Rating
Temp.
Factor
Inch (mm)
OF
°C
OF
°C
1/2" NPT
(R1/2)
a „
/s (10)
175 (12)
135
57
100
38
4.4(63)
2.45 (62)
7.
Technical Data: F1 Res 44 LL SWC (SIN RA3331) continued
Max. Coverage area
Ft x Ft (m x m)
Max. Spacing
Ft (m)
Ordinary Temp. Rating
155°F/68°C
Top of Deflector to
Ceiling
Inch (mm)
Minimum
Spacing
Ft (m)
Flow
GPM (Vmin)
Pressure
PSI bar
12 x 12 (3.6 x 3.6)
12(3.6)
13 (49.2)
8.7 (0.60)
4 to 6 (100 to 152)
8(2.4)
14 x 14 (4.3 x 4.3)
14(4.3)
14 (53.0)
10.2 (0.71)
16 x 16 (4.9 x 4.9)
16(4.9)
17(64.3)
15.0(1.1)
16 x 18 (4.9 x 5.5)
16(4.9)
19 (71.8)
18.7 (1.13)
16 x 20 (4.9 x 6.1)
16(4.9)
23 (87.1)
27.4 (1.89)
12 x 12 (3.6 x 3.6)
12(3.6)
14 (52.9)
10.2 (0.71)
6 to 12 (152 to 305)
14 x 14 (4.3 x 4.3)
14(4.3)
15 (56.7)
11.7 (0.81)
16 x 16 (4.9 x 4.9)
16(4.9)
18(68.1)
16.8(1.16)
16 x 18 (4.9 x 5.5)
16(4.9)
20 (75.6)
20.7 (1.43)
Maintenance
Model F1 Res 30 LL, 49 LL, F1 Res 58 LL and F1 Res 44
LL Sprinklers should be inspected and the sprinkler sys-
tem maintained in accordance with NFPA 25, 13, 13D, and
13R. Do not clean sprinkler with soap and water, Ammonia
or any other cleaning fluids. Remove dust by using a soft
brush or gentle vacuuming. Replace any sprinkler which
has been painted (other than factory applied) or damaged
in any way. A stock of spare sprinklers should be main-
tained to allow quick replacement of damaged or operated
sprinklers. Prior to installation, sprinklers should remain
in the original cartons and packaging until used. This will
minimize the potential for damage to sprinklers that could
cause improper operation or non -operation.
Model F1 Res 30 LL, 49 LL & 58 LL Pendent
Sprinkler Specifications
Sprinklers shall be [cULus Listed] [WaterMark Certified
WMCS] low flow residential pendent sprinklers engineered
to provide a minimum design density of 0.05 gpm/ft2 over
the listed coverage area. Listed flows as specified by the
manufacturer's technical data sheets are to be used. Resi-
dential sprinklers shall be installed in conformance with the
manufacturer's installation guidelines and the applicable
installation standard. Deflector -to -ceiling distance listing
shall be 1" to 4" maximum, unless specifically listed other-
wise. Sprinkler frame and deflector shall be of bronze frame
construction having a'/2" NPT thread. Water seal assembly
shall consist of a PTFE-coated Belleville spring washer with
top -loaded extruded or cold head cup with 3 mm glass
bulb containing no plastic parts, and having a temperature
rating of [155°F (68°C)] [175°F (79°C)]. Sprinklers shall
have a nominal K-factor of 3.0, 4.9 and 5.8. Standard fin-
ish; [Bronze] [Chrome -plated] [White Polyester] [Special
finish- specify]. Residential pendent sprinklers shall be
Reliable Model F1 Res 30 LL, 49 LL & 58 LL, SIN RA3311,
RA3316 & RA3313 (Bulletin 033).
Model F1 Res 49 LL & 58 LL Recessed
Pendent/F1
Model F1 Res 30 LL, 49 LL & 58 LL Recessed
Pendent/F2
Model F1 Res 30 LL, 49 LL & 58 LL Recessed
Pendent/FP Specifications
Sprinklers shall be [cULus Listed] [WaterMark Certified
WMCS] low flow residential recessed pendent sprinklers
engineered to provide a minimum design density of 0.05
gpm/ft2 over the listed coverage area. Listed flows as
specified by the manufacturer's technical data sheets are
to be used. Residential sprinklers shall be installed in con-
formance with the manufacturer's installation guidelines
and the applicable installation standard. Deflector -to -ceil-
ing distance listing shall be 1" to 4" maximum, unless spe-
cifically listed otherwise. Sprinkler frame and deflector shall
be of bronze frame construction having a'/2" NPT thread.
Water seal assembly shall consist of a PTFE-coated Bel-
leville spring washer with top -loaded extruded or cold
head cup with 3 mm glass bulb containing no plastic parts,
and having a temperature rating of [155°F (68°C)] [175°F
(79°C)], Sprinklers shall have a nominal K-factor of 3.0, 4.9
& 5.8. Standard finish; [Bronze] [Chrome -plated] [White
Polyester] [Special finish- specify]. Recessed escutcheon
assembly shall be a steel, two-piece escutcheon [with'/2"
adjustment (Model F2)] [with 3/4" adjustment (Model F1)] [of
push -on and thread off design with'/2" adjustment (Model
FP)]. Standard finish shall be [brass][bright chrome] [white
painted]. Residential recessed pendent sprinklers shall be
Reliable [Model F1 Res 30 LL, 49 LL & 58 LL Recessed
Pendent/F1 ] [Model F1 Res 30 LL, 49 LL & 58 LL Recessed
Pendent/F2] [Model F1 Res 30 LL, 49 LL & 58 LL Recessed
Pendent/FP] SIN RA3311, RA3316 & RA3313 (Bulletin 033),
A.,
Model F1 Res 30 LL, 49 LL & 58 LL CCP Pendent
(Concealed) Specifications
Sprinklers shall be [cULus Listed] [WaterMark Certified
WMCS] low flow residential concealed sprinklers engi-
neered to provide a minimum design density of 0.05 gpm/
ft2 over the listed coverage area. Listed flows as speci-
fied by the manufacturer's technical data sheets are to be
used. Residential sprinklers shall be installed in confor-
mance with the manufacturer's installation guidelines and
the applicable installation standard. Sprinkler frame and
deflector shall be of bronze frame construction having a 1/2"
NPT thread. Water seal assembly shall consist of a PTFE-
coated Belleville spring washer with top -loaded extruded
or cold head cup with 3 mm glass bulb containing no plas-
tic parts, and having a temperature rating of 1550F (680C).
Cover plate assembly shall consist of a brass cover plate
and copper alloy retainer flange. Method of attaching the
cover plate to the sprinkler cup shall be a push -on and
thread -off design allowing a 1/2" cover plate adjustment.
Cover plate temperature rating shall be 135°F (57°C), A
plastic protective cap shall be provided and factory in-
stalled inside the sprinkler cup to protect the sprinkler from
damage, which could occur during construction before the
cover plate is installed, Standard cover plate finish: [White]
[Custom Color— specify]. ]. Concealed pendent sprinklers
shall be Reliable Model F1 Res 30 LL, 49 LL & 58 LL CCP,
SIN RA3311, RA3316 & RA3313 (Bulletin 033).
Model F1 Res 44 LL Horizontal Sidewall
Residential Sprinkler Specifications
Sprinklers shall be [cULus Listed] [WaterMark Certified
WMCS] low flow residential horizontal sidewall sprinklers
engineered to provide a minimum design density of 0.05
gpm/ft2 over the listed coverage area. Listed flows as
specified by the manufacturer's technical data sheets are to
be used. Residential sprinklers shall be installed in confor-
mance with the manufacturer's installation guidelines and
the applicable installation standard. Sprinkler frame and
deflector shall be of bronze frame construction having a 1/2"
NPT thread. Water seal assembly shall consist of a PTFE-
coated Belleville spring washer with top -loaded extruded
or cold head cup with 3 mm glass bulb containing no plas-
tic parts, and having a temperature rating of [ 1550F (680C)]
[175°F (790C)], Sprinklers shall have a nominal K-factor
of 4.4 (62,8). Standard finish: [Bronze] [Chrome -plated]
[White Polyester] [Special finish— specify]. Residential hori-
zontal sidewall sprinklers shall be Reliable Model F1 Res
44 LL, SIN RA3331 (Bulletin 033).
Model F1 Res 44 LL Recessed
Horizontal Sidewall Sprinkler Specifications
Use description for the Model F1 Res 44 horizontal side -
wall sprinkler with the following modifications: Replace
"horizontal sidewall sprinkler" with "recessed horizontal
sprinkler." Add: Recessed escutcheon assembly shall be
a steel, two-piece escutcheon with 1/2" adjustment (Model
F2). Standard finish shall be [brass][bright chrome] [white
painted] [Special finish— specify]. Residential recessed
horizontal sidewall sprinklers shall be Reliable Model F1
Res 44 LL/F2, SIN RA3331 (Bulletin 033).
Standard Finishes
F1, F2, FP
Sprinkler
Cover Plates
Escutcheons
Bronze
Brass
White Painted
Chrome Plated
Bright Chrome Plated
Chrome
White and Black Polyester
White Painted
Coated
Special Application Finishes
F1, F2,
Sprinkler
Cover Plates
Escutcheons
Bright Brass
Bright Brass
Bright Brass
Black Plated
Black Plated
Black Plated
Black Paint
Black Paint
Black Paint
Off White
Off White
Off White
Satin Chrome
Satin Chrome
Satin Chrome
(1) Other finishes and colors are available on special order.
Consult factory for details.
Note: Paint or any other coating applied over the factory finish will void
all approvals and warranties.
Ordering Information
Specify:
1. Sprinkler Model
2. Sprinkler Type
3. Temperature Rating
4. Sprinkler Finish
5. Escutcheon Finish
6. Cover Plate Finish
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Association, Factory
Mutual Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Products manufactured and distributed by Reliable have been protecting life and property for almost 100 years.
Manufactured by
Reliable Automatic Sprinkler Co., Inc. J011111 Recycled
® (800) 431-1588 Sales Offices Paper
Relle labi
(800) 848-6051 Sales Fax Revision lines indicate updated or new data.
(914) 829-2042 Corporate Offices
www.reliablesprinkler.com Internet Address EG. Printed in U.S.A. 02/19 P/N 9999970411
UponorAquaPEX®White, coils
Submittal information
Revision M: Sept. 18, 2018
Project information
Job name:
Location: Part no. ordered:
Uponof
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved by:
Technical data
Material: Crosslinked polyethylene PEX-a Engel Method; PEX 5106
Standard grade hydrostatic ratings (PPI): 200°F (93°C) at 80 psi (551 kPa)
180°F (82°C) at 100 psi (689 kPa)
73.4°F (23°C) at 160 psi (1,103 kPa)
'/2", %", 1", 1'/4", 1'/2" and 2" UponorAquaPEX® White only:
---
120°F (49°C) at 130 psi (896 kPa)
Linear expansion rate: 1.1'/10°F/100' (27.94mm/5.56°C/30.48m)
Product information and application use
Uponor AquaPEX White is used for hot and cold domestic potable water distribution and residential fire safety as well
as radiant heating/cooling and hydronic piping systems containing no ferrous corrodible components or where ferrous
components are isolated from the piping.
✓ Description
Part number
I.D.
O.D.
Weight
'/4' Uponor AquaPEX White, 100-ft. coil
F1040250
0.241"
0.375"
4.0 lbs.
Uponor AquaPEX White, 400-ft. coil
F1090375
0.350"
0.500"
20.0 lbs.
Uponor AquaPEX White, 1,000-ft. coil
F1120375
0.350"
0.500"
44.0 lbs.
''/2" Uponor AquaPEX White, 100-ft. coil
F1040500
0.475"
0.625"
6.0 lbs.
%" Uponor AquaPEX White, 300-ft. coil
F1060500
0.475"
0.625"
18.0 lbs.
''/z" Uponor AquaPEX White, 500-ft. coil
F1100500
0.475"
0.625"
27.6 lbs.
''/z" Uponor AquaPEX White, 1,000-ft. coil
F1120500
0.475"
0.625"
54.0 lbs.
Uponor AquaPEX White, 300-ft. coil
F1060625
0.574"
0.750"
28.0 lbs.
Uponor AquaPEX White, 1000-ft. coil
F1120625
0.574"
0.750"
86.0 lbs.
Uponor AquaPEX White, 100-ft. coil
F1040750
0.671"
0.875"
10.0 lbs.
Y44" Uponor AquaPEX White, 300-ft. coil
F1060750
0.671"
0.875"
34.0 lbs.
%" Uponor AquaPEX White, 500-ft. coil
F1100750
0.671"
0.875"
54.0 lbs.
1" Uponor AquaPEX White, 100-ft. coil
F1041000
0.862"
1.125"
20.0 lbs.
1" Uponor AquaPEX White, 300-ft. coil
F1061000
0.862"
1.125"
56.0 lbs.
1" Uponor AquaPEX White, 500-ft. coil
F1101000
0.862"
1.125"
93.0 lbs.
1'/4' Uponor AquaPEX White, 100-ft. coil
F1061250
1.054"
1.375"
34.0 lbs.
1'/4" Uponor AquaPEX White, 300-ft. coil
F1021250
1.054"
1.375"
106.0 lbs.
1'/z" Uponor AquaPEX White, 100-ft. coil
F1061500
1.244"
1.625"
44.0 lbs.
1'/z" Uponor AquaPEX White, 300-ft. coil
F1021500
1.244"
1.625"
133.0 lbs.
2" Uponor AquaPEX White, 100-ft. coil
F1062000
1.629"
2.125"
68.2 lbs.
2" Uponor AquaPEX White, 200-ft. coil
F1052000
1.629"
2.125"
136.4 lbs.
2" Uponor AquaPEX White, 300-fit. coil
F1022000
1.629"
2.125"
204.6 lbs.
2'/i' Uponor AquaPEX White, 100-ft. coil
F1062500
2.011"
2.625"
88.0 lbs.
2'/i' Uponor AquaPEX White, 300-ft. coil
F1022500
2.011"
2.625"
264.0 lbs.
3" Uponor AquaPEX White, 100-ft. coil
F1063000
2.400"
3.125"
128.0 lbs.
3" Uponor AquaPEX White, 300-ft. coil
F1023000
2.400"
3.125"
384.0 lbs.
Installation
Use ProPEX® fittings for %" through 3" pipe.' Refer to the ProPEX Connections Instructional
Guide, Uponor
Piping Pocket Guide,
Plumbing Design Assistance
Manual (PDAM), Complete Design Assistance Manual (CDAM), Hydronic Piping
Design Assistance Manual (HPDAM) or AquaSAFET1A Residential
Fire Sprinkler
Installation Guide for more information.
Listings2
Codes
Standards
cNSFus-fs3; cNSFus-pw; cQAlus P321; UL;
IAPMO; ICC; IPC; IMC; IRC;
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM
CSA; PPI TR-4; ICC-ES; BMEC; CCMC
UPC; UMC; NSPC; HUD;
F2023; ASTM E84; CAN/ULC S102.2; ASTM
E119/UL 263; CAN/ULC S101;
UFGS; NPC of Canada;
ASTM E814/ULC S115;
CSA B137.5; CSA B214;
NBC of Canada
UL 18213; ULC/ORD-C199P3;
AWWA C9044
Related applications Contact information
PEX-a plumbing systems Uponor, Inc. Uponor Ltd.
AquaSAFETM fire safety systems 5925 148"' Street West 6510 Kennedy Road
Radiant heating and cooling systems Apple Valley, MN 55124 USA Mississauga, ON L5T 2X4 CANADA
Hydronic piping systems Phone: 800.321.4739 Phone: 888.994.7726
Fax: 952.891.2008 Fax: 800.638.9517
uponorpro.com uponorpro.com
'ProPEX® is a registered trademark of Uponor, Inc. ProPEX- is a trademark of Uponor Ltd.
2Visit listing agency's website for complete information. 3For 3/4", 1" and 1'W pipe only. 4For %" to 3" pipe.
ProPEX° Ring
Submittal information
Revision I: Nov. 1, 2018
Project information
Job name:
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved by:
Technical data
Material: Engel -method crosslinked polyethylene (PEX-a)
Density: 926 to 940 kg/m3
Degree of crosslinking: 70% to 89%
Product information and application use
Uponor ProPEX® rings are required to make a proper ProPEX connection.' The ProPEX
ring with stop includes a leading edge chamfer and stop edge.
✓ Description Part number
ProPEX Ring, %"
ProPEX Ring with Stop, '/2"
ProPEX Ring with Stop, %"
ProPEX Ring with Stop, 3/4"
ProPEX Ring with Stop, 1"
ProPEX Ring with Stop, 1'/4"
ProPEX Ring with Stop, 1'/2"
ProPEX Ring with Stop, 2"
ProPEX Ring with Stop, 2'/2"
ProPEX Ring with Stop, 3"
Installation
Q4690302
Q4690512
Q4690625
Q4690756
Q4691000
Q4691250
Q4691500
Q4692000
Q4692500
Q4693000
uponof
Length
I.D.
O.D.
Weight
0.54"
0.49"
0.74"
0.005lbs.
0.63"
0.63"
0.87"
0.006lbs.
0.79"
0.75"
1.00"
0.008lbs.
0.87"
0.88"
1.13"
0.012lbs.
1.10"
1.13"
1.42"
0.020lbs.
1.35"
1.38"
1.66"
0.030lbs.
1.61"
1.63"
1.91"
0.040 lbs.
1.97"
2.14"
2.61"
0.133lbs.
2.61"
2.66"
3.25"
0.230lbs.
3.12"
3.16"
3.87"
0.400lbs.
Square cut the Uponor PEX tubing. Remove excess material. Slide the ProPEX ring over the end of the tubing (maximum 'lid' over -hang for rings without stop).
When using the ProPEX ring with stop, slide the ring on the tubing with the chamfered edge first until the end of the tubing contacts the stop edge. Expand the
tubing and ring. If using the ProPEX Manual Expander Tool, rotate the tool a quarter turn after each expansion to prevent the formation of grooves. Remove the
expansion tool and fully seat the tubing and ring against the shoulder of the fitting. Make ProPEX connections at temperatures above 5°F/-15°C. For more
information, refer to the Uponor ProPEX Connections Instructional Guide.
Listings'
cNSFus-fs3; cNSFus-pw; cNSFus-rfh; cQAlus; UL; CSA; PPI TR-4; ICC-ES; IAPMO; BMEC; CCMC; cQAlus P321
Codes
ICC; IPC; IMC; IRC; UPC; UMC; NSPC; HUD; UFGS; NPC of Canada; NBC of Canada
Standards
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM F2023; ASTM E84; CAN/ULC S102.2; ASTM E119/UL 263; CAN/ULC S101; ASTM
E814/ULC S115; CSA 13137.5; CSA B214; UL 18213; ULC/ORD-C199P3
Related applications Contact information
PEX-a plumbing systems
Uponor Inc.
Uponor Ltd.
AquaSAFE fire safety systems
5925 148"' Street West
6510 Kennedy Road
Hydronic radiant heating and cooling systems
Apple Valley, MN 55124 USA
Mississauga, ON L5T 2X4 CANADA
Snow melting systems
Phone: 800.321.4739
Phone: 888.994.7726
Turf conditioning systems
Fax: 952.891.2008
Fax: 800.638.9517
Permafrost prevention systems
uponorpro.com
uponorpro.com
'ProPEX® is a registered trademark of Uponor, Inc. ProPEXT" is a trademark of Uponor Ltd.
2Visit listing agency's website for complete information; 3For '/2",'/", 1", 11/", 1'/2" and 2" tubing only
ProPEXO Engineered
Submittal information
Revision H: May 23, 2019
Project information
Job name:
Polymer (EP) Tee
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved bv:
Technical data
Material: Engineered polymer (EP)
Maximum temperature (no pressure): 320°F (160°C)
Maximum working temperature/pressure: 210*F (99*C) at 150 psi (1,034 kPa)
Product information and application use
ProPEX® engineered polymer (EP) tees make diverting connections for Uponor crosslinked
polyethylene (PEX-a)tubing for use in hot and cold domestic potable water systems,
residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each
end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor
AquaPEX® or Wirsbo hePEXTM tubing.'
Note: Branch size is listed last in the part descriptions.
Uponof
Part
✓
Equivalent Equivalent
cv
cv
Description
number
A B Weight
length (ft.) length (ft.)
through
branch
through branch
ProPEX EP Tee, ''M." PEX x'/z' PEX x'/" PEX Q4755060
2.50" 1.53" 0.02 lbs.
1.0 6.3
7.7
3.4
ProPEX EP Tee, %" PEX x'/:' PEX x'/:' PEX* Q4757575
3.30" 1.94" 0.05 lbs.
1.5 15.6
15.7
5.4
ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX* Q4751010
4.10" 2.47" 0.07 lbs.
1.3 12.7
30.5
11.3
ProPEX EP Tee, 1'/4" PEX x 1'/4" PEX x 1'/4" PEX* Q4751313
4.80" 3.22" 0.15 lbs.
3.8 8.6
34.0
23.9
ProPEX EP Tee, 1 Yz' PEX x 1'/." PEX x 1'M." PEX Q4751515
5.80" 3.82" 0.25 lbs.
1.8 10.6
63.7
31.0
ProPEX EP Tee, 2" PEX x 2" PEX x 2" PEX Q4752000
7.45" 4.79" 0.38 lbs.
0.8 15.5
150.7
52.5
ProPEX EP Tee, 21/' PEX x 21/z' PEX x 21/z' PEX Q4752500
10.56" 5.45" 1.14 lbs.
2.7 22.3
197.2
81.5
ProPEX EP Tee, 3" PEX x 3" PEX x 3" PEX Q4753000
12.26" 6.37" 1.86 lbs.
2.8 23.9
286.6
122.8
Installation
Use the appropriate ProPEX Ring for PEX-a tubing. Refer to the Uponor Professional Plumbing Installation Guide, AquaSAFET"^ Residential Fire
Sprinkler Installation
Guide or Uponor Radiant Installation Handbook for additional information.
Standards
ASTM E84; ASTM E119; ASTM E814; ASTM F877; ASTM F1960; CAN/CSA B137.5; NSF 14; NSF 61
Codes
IBC; IMC; IPC; IRC; NPC of Canada; NSPC; UMC; UPC
Listings
cNSFus-pw; *cNSFus-pw-fs; cQAlus P321; HUD MR 1269; ICC-ES-PMG-1006; ICC-ES-PMG-1012; *UL 1821; *ULC/ORD-C199P; U.P. Code
Related applications
Contact information
PEX-a plumbing systems
Uponor, Inc.
Uponor Ltd.
Hydronic radiant heating and cooling systems
5925 148t' Street West
6510 Kennedy Road
Snow and ice melting systems
Apple Valley, MN 55124 USA Mississauga, ON L5T 2X4 CANADA
Turf conditioning systems
Phone: 800.321.4739
Phone: 888.994.7726
Permafrost prevention systems
Fax: 952.891.2008
Fax: 800.638.9517
AquaSAFETm fire safety systems
uponorpro.com
uponorpro.com
'ProPEX® is a registered trademark of Uponor, Inc. ProPEXT" is a trademark of Uponor Ltd.
ProPEX° Engineered Polymer (EP) Reducing Tee (up to 11/2") uponof
Submittal information
Revision I: Sept. 16, 2019
Project information
Job name:
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: Approved by:
Technical data
Material: Engineered polymer (EP) n�
Maximum temperature (no pressure): 320°F (160°C)
Max. working temperature/pressure: 210°F (99°C) at 150 psi (1,034 kPa)
Product information and application use
ProPEX® engineered polymer (EP) reducing tees make diverting connections for Uponor PEX-a pipe for use in hot and cold B
domestic potable water systems, residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each
end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX11 or Wirsbo hePEXTM
pipe.' Note: Branch size is listed last in the part descriptions.
✓ Description
Part
A
B
Weight
Equiv, length (ft.)
Equiv. length
Cv
Cv
number
through
(ft.) branch
through
branch
ProPEX EP Reducing Tee,''/2" PEX x'/i' PEX x %" PEX
Q4755575
2.86"
1.76"
0.03 lbs.
1.0
15.6
7.7
5.4
ProPEX EP Reducing Tee, '/<" PEX x'/i' PEX x'/i' PEX
Q4757555
3.10"
1.70"
0.04 lbs.
3.5
6.4
4.6
3.4
ProPEX EP Reducing Tee, '/<" PEX x'/z' PEX x'/;' PEX*
Q4757557
3.10"
1.94"
0.04 lbs.
2.3
16.1
5.4
5.4
ProPEX EP Reducing Tee, '/<" PEX x'/;' PEX x PEX
Q4757563
3.30"
1.85"
0.05 lbs.
N/A
N/A
N/A
N/A
ProPEX EP Reducing Tee, '/<" PEX x'/;' PEX x'/z' PEX*
Q4757550
3.30"
1.70"
0.04 lbs.
2.0
7.6
14.2
3.1
ProPEX EP Reducing Tee, '/<" PEX x'/;' PEX x 1" PEX*
Q4757710
3.64"
2.32"
0.08 lbs.
1.5
5.7
15.7
8.7
ProPEX EP Reducing Tee, 1" PEX x'/i' PEX x 1" PEX
Q4751501
3.71"
2.43"
0.09 lbs.
1.98
9.7
12.3
5.7
ProPEX EP Reducing Tee, 1" PEX x'/d' PEX x'/ PEX
Q4751750
3.65"
1.96"
0.07 lbs.
2.27
6.69
3.1
13.2
ProPEX EP Reducing Tee, 1" PEX x'/<" PEX x'/4" PEX*
Q4751775
3.90"
2.24"
0.08 lbs.
2.4
16.7
12.8
5.3
ProPEX EP Reducing Tee, 1" PEX x'/<" PEX x 1" PEX*
Q4751751
3.90"
2.47"
0.08 lbs.
2.4
15.1
12.9
10.5
ProPEX EP Reducing Tee, 1" PEX x'/;' PEX x 1%" PEX
Q4751753
4.15"
2.95"
0.12 lbs.
2.74
19.48
14.7
12.0
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x'/;' PEX*
Q4751150
4.10"
2.00"
0.08 lbs.
1.2
6.5
32.2
3.4
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x %" PEX*
Q4751175
4.10"
2.24"
0.09 lbs.
1.7
6.4
27.8
8.2
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x 1 '/;' PEX*
Q4751113
4.38"
2.95"
0.13 lbs.
6.52
5.37
15.0
28.0
ProPEX EP Reducing Tee, 1%" PEX x'/<" PEX x'/<" PEX*
Q4751377
4.11"
2.38"
0.09 lbs.
2.74
7.41
7.3
12.0
ProPEX EP Reducing Tee, 1%" PEX x'/<" PEX x 1" PEX*
Q4751371
4.37"
2.62"
0.11 lbs.
2.70
7.59
13.9
12.1
ProPEX EP Reducing Tee, 1%" PEX x'/<" PEX x 1Y<" PEX*
Q4751373
4.61"
2.88"
0.13 lbs.
2.74
11.91
18.8
12.0
ProPEX EP Reducing Tee, 1'/<" PEX x 1" PEX x %" PEX*
Q4751317
4.50"
2.73"
0.11 lbs.
3.4
5.2
21.0
9.3
ProPEX EP Reducing Tee, 11/;' PEX x 1" PEX x 1" PEX*
Q4751311
4.70"
2.97"
0.12 lbs.
11.0
23.0
11.7
8.4
ProPEX EP Reducing Tee, 11/;' PEX x 11/4" PEX x'/;' PEX*
Q4751350
4.40"
2.15"
0.10 lbs.
1.9
3.9
45.2
4.1
ProPEX EP Reducing Tee, 11/4" PEX x 11/4" PEX x %" PEX*
Q4751337
4.70"
2.73"
0.13 lbs.
2.3
5.7
43.4
8.9
ProPEX EP Reducing Tee, 11/4" PEX x 11/4" PEX x 1" PEX*
Q4751331
5.00"
2.97"
0.14 lbs.
4.2
6.3
33.0
15.8
ProPEX EP Reducing Tee, 1'/z" PEX x'/<" PEX x %" PEX
Q4751577
4.37"
2.64"
0.13 lbs.
2.88
7.41
7.3
11.7
ProPEX EP Reducing Tee, 1'/z" PEX x'/<" PEX x 1'/z" PEX
Q4751575
4.97"
3.39"
0.19 lbs.
2.74
19.10
22.9
12.0
ProPEX EP Reducing Tee, 1'/z" PEX x 1" PEX x %" PEX
Q4751517
5.25"
3.06"
0.17 lbs.
4.0
5.1
19.5
9.3
ProPEX EP Reducing Tee, 1'/z" PEX x 1" PEX x 1" PEX
Q4751511
5.25"
3.30"
0.18 lbs.
4.3
6.5
18.9
15.6
ProPEX EP Reducing Tee, 11/2" PEX x 1" PEX x 11/2" PEX
Q4751505
5.40"
3.45"
0.20 lbs.
4.2
14.9
19.0
26.5
ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x %" PEX
Q4751537
5.50"
2.65"
0.18 lbs.
4.2
11.3
33.1
6.3
ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x 1" PEX
Q4751531
5.50"
2.85"
0.19 lbs.
3.1
13.1
36.4
11.2
ProPEX EP Reducing Tee, 11/2" PEX x 11/4" PEX x 11/4" PEX
Q4751533
5.50"
3.15"
0.21 lbs.
2.0
17.7
45.4
17.0
ProPEX EP Reducing Tee, 1'/z" PEX x 1'/2" PEX x'/i' PEX
Q4751550
4.95"
2.30"
0.14 lbs.
2.4
6.3
60.5
3.4
ProPEX EP Reducing Tee, 1'/z" PEX x 1'/2" PEX x %" PEX
Q4751557
5.30"
3.06"
0.20 lbs.
2.9
5.4
56.0
9.0
ProPEX EP Reducing Tee, 1'/2" PEX x 1'/2" PEX x 1" PEX
Q4751551
5.75"
3.30"
0.21 lbs.
3.1
6.9
53.8
15.3
ProPEX EP Reducing Tee, 1'/2" PEX x 1'/2" PEX x 11/4" PEX
Q4751553
5.80"
3.56"
0.22 lbs.
3.2
4.1
54.3
33.7
Installation
Use the appropriate ProPEX ring for PEX-a pipe. Refer to the Uponor Piping Systems
Installation
Guide,
the AquaSAFETm Residential Fire
Sprinkler Installation Guide or the Uponor
Radiant Installation Handbook for additional information.
Standards Codes
Listings
ASTM E84; ASTM E119; ASTM E814; IBC; IMC; IPC; IRC;
NPC of Canada;
cNSFus-pw; *cNSFus-pw-fs;
cQAlus P321;
HUD MR 1269; ICC-ES-PMG-1006;
ASTM F877; ASTM F1960; NSPC; UMC; UPC
ICC-ES-PMG-1012;
*UL 1821; *ULC/ORD-C199P; U.P. Code
CAN/CSA B137.5; NSF 14; NSF 61
Related applications
Contact information
PEX-a plumbing systems
Uponor Inc.
Uponor Ltd.
Hydronic radiant heating and cooling systems
5925 1481h Street West
6510 Kennedy Road
Snow and ice melting systems
Apple Valley,
MN 55124
USA
Mississauga, ON L5T 2X4
CANADA
Turf conditioning systems
Phone: 800.321.4739
Phone: 888.994.7726
Permafrost prevention systems
Fax: 952.891.2008
Fax: 800.638.9517
AquaSAFETM fire safety systems
uponorpro.com
uponorpro.com
'ProPEX® is a registered trademark of Uponor Inc. ProPEX" is a trademark of Uponor Ltd.
ProPEX® Engineered Polymer (EP) Elbow
Submittal information
Revision J: June 21, 2019
Project information
Job name:
Location: Part no. ordered:
Engineer: Date submitted:
Contractor: Submitted by:
Manufacturer's representative: ADDroved bv:
Technical data
Material: Engineered polymer (EP)
Maximum temperature (no
pressure): 320°F (160°C)
Maximum working
temperature/pressure: 210°F (99°C) at 150 psi (1,034 kPa)
Product information and application use
ProPEX® engineered polymer (EP) elbows make 90-degree connections for Uponor
crosslinked polyethylene (PEX-a) tubing for use in hot and cold domestic potable water
systems, residential fire safety and hydronic radiant heating and cooling systems. Each end
of the elbow is manufactured with an Uponor ProPEX fitting for connections to Uponor
AquaPEX® or Wirsbo hePEXTm tubing.'
Uponof
✓ Description
Part number
A
B
Weight
Equivalent
Cv
length (ft.)
ProPEX EP Elbow, '/z" PEX x'/z" PEX
Q4760500
1.30"
1.30"
0.02 lbs.
10.4
2.6
ProPEX EP Elbow, 3/4° PEX x 3/4" PEX*
Q4760750
1.60"
1.60"
0.03 lbs.
10.8
6.7
ProPEX EP Elbow, 1" PEX x 1" PEX*
Q4761000
2.10"
2.10"
0.07 lbs.
11.5
11.9
ProPEX EP Elbow, 1'/4" PEX x 1'/4" PEX*
Q4761250
2.45"
2.45"
0.11 lbs.
10.0
22.2
ProPEX EP Elbow, 1'/z" PEX x 1'/z" PEX
Q4761500
2.77"
2.77"
0.18 lbs.
11.5
29.7
ProPEX EP Elbow, 2" PEX x 2" PEX
Q4762000
3.76"
3.76"
0.30 lbs.
17.1
50.2
ProPEX EP Elbow, 2'/z" PEX x 2'/z" PEX
Q4762500
4.93"
4.93"
0.85 lbs.
20.0
86.0
ProPEX EP Elbow, 3" PEX x 3" PEX
Q4763000
5.88"
5.88"
1.44 lbs.
23.2
125.0
ProPEX EP 45 Elbow, 1'/2' PEX x 1'/2" PEX
Q4761515
2.32"
2.32"
0.13 lbs.
9.3
33.1
ProPEX EP 45 Elbow, 2" PEX x 2" PEX
Q4762020
2.91"
2.91"
0.32 lbs.
8.8
68.9
ProPEX EP 45 Elbow, 2'/2' PEX x 2'/2" PEX
Q4762525
3.83"
3.83"
0.65 lbs.
7.0
136.8
ProPEX EP 45 Elbow, 3" PEX x 3" PEX
Q4763030
4.48"
4.48"
1.07 lbs.
8.3
195.5
Installation
Use the appropriate ProPEX ring for PEX-a tubing. Refer to the Uponor Piping
Pocket Guide,
AquaSAFETm
Residential Fire Sprinkler Installation Guide
or Uponor
Radiant Installation Handbook for additional information.
Standards
ASTM E84; ASTM E119; ASTM E814; ASTM F877; ASTM F1960; CAN/CSA B137.5; NSF
14; NSF 61
Codes
IBC; IMC; IPC; IRC; NPC of Canada; NSPC; UMC; UPC
Listings
cNSFus-pw; *cNSFus-pw-fs; cQAlus P321; HUD MR 1269; ICC-ES-PMG-1006; ICC-ES-PMG-1012; *UL 1821; *ULC/ORD-C199P; U.P. Code
Related applications Contact information
PEX-a plumbing systems
Uponor Inc.
Uponor Ltd.
Hydronic radiant heating and cooling systems
5925 148t' Street West
6510 Kennedy Road
Snow and ice melting systems
Apple Valley, MN 55124 USA
Mississauga, ON L5T 2X4 CANADA
Turf conditioning systems
Phone: 800.321.4739
Phone: 888.994.7726
Permafrost prevention systems
Fax: 952.891.2008
Fax: 800.638.9517
AquaSAFE fire safety systems
uponorpro.com
uponorpro.com
1 ProPEX® is a registered trademark of Uponor, Inc. ProPEX- is a trademark of Uponor Ltd.
ProPEX° Fire Sprinkler Adapter
Submittal Information
Revision B: March 17, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer's Representative: Approved By:
Technical Data
Material: 300 Series Stainless Steel
Product Information and Application Use
Use the ProPEX° Fire Sprinkler Adapter in conjunction with the
appropriate sprinkler to provide a multi -purpose residential fire
sprinkler system'. For residential applications, the system is
installed with the cold -potable portion of the Uponor plumbing
system. Make connections with Uponor ProPEX fittings. These
fittings are designed for use only with 3/4" or 1" AquaPEX°
White tubing in the Uponor AQUASAFE° Looped System.
uponof
✓ Description Part A B C D E Weight
Number
ProPEX Fire Sprinkler Adapter, 3/4" PEX x 1/2" FNPT Q7517550 0.75" 1.88" 2.50" 1.82" 1.41" 0.268 lbs.
ProPEX Fire Sprinkler Adapter, 1" PEX x 1/2" FNPT Q7511050 0.75" 1.88" 2.50" 2.06" 1.54" 0.408 lbs.
Installation
Use appropriate ProPEX Ring for connecting the tubing. Refer to the AquaPEX Installation Handbook or the Uponor AQUASAFE°
Installation Guide for additional information.
Standards
CAN/CSA B137.5; ASTM F877; ASTM F 1960
Codes
IPC; UPC; NSPC; IRC; IMC; NPC of Canada
Listings
ANSI/NSF 14- and 61-certified; U.P. Code; ICC ESR 1099; HUD MR 1269; UL 1821; ULC/ORD - C 199 P
Related Applications
PEX-a Plumbing Systems
AQUASAFE Fire Safety Systems
Contact Information
Uponor, Inc.
5925 1481h Street West
Apple Valley, MN 55124 USA
Phone: (800) 321-4739
Fax: (952) 891-2008
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: (888) 994-7726
Fax: (800) 638-9517
www.uponor.ca
'ProPEX° is a registered trademark of Uponor, Inc. ProPEXTM is a trademark of Uponor Ltd.