Loading...
McKenzie-HasseRetrofit-BLD20220955-S I ReportDAILY FIELD REPORT AAR TESTING AND INSPECTION, INC. 7126 180th Ave NE, Suite C101 Redmond, WA 98052 425-881-5812 Inspection Date 09/01/2022 Report Number JAH090122D CLIENT INFORMATION PROJECT INFORMATION Contact Matt Robinson Project No. 22-592 Company Evergreen Siesmic, LLC Project Name McKenzie- Hasse Retrofit Address 21304 82nd PL SE Address 18603 81st Ave W City Snohomish City Edmonds Contractor Permit No. BLD-2022-0955 INSPECTION TYPE(S) STRUCTURE(S) / LOCATION(S) Proprietary Anchors - Mechanical Hold downs at all four outer wall of the house. Weather Start Time End Time Sunny 12:30 PM 03:00 PM DRAWINGS / DOCUMENTS REFERENCED INSPECTION OBSERVATION / REMARKS Epoxy Reinforcing Steel Dowel Installation: As requested, I was on site to observe the installation of epoxied anchor dowels on the four outer walls of the house. I observed the contractors cleaning the drilled holes by blowing them out with compressed air, and brushing the holes with a bottle brush. The holes were at least 8" deep. The contractors used Simpson Strong Tie Set XP Epoxy, with an expiration date of 04/17/24. Sufficient quantities of the epoxy were placed in the holes prior to installing the 5/8" all thread anchor dowels, with one full circle rotation. A total of 16 dowels were installed at this location. Items inspected are in conformance with approved plans, specifications and jurisdictional requirements Inspectors Name Report Date Reviewers Signature Reviewed By Reviewed Date Inspectors Signature James Huggins 09/01/2022 M y� Teajalam (TJ) Gounden 09/02/2022 A� 5862F683-7407-47C4-A741-9DODOA96FF1A DAILY FIELD REPORT / r AAR TESTING AND INSPECTION, INC. 7126 180th Ave NE, Suite C101 Redmond, WA 98052 425-881-5812 9 Using an air compressor to clean out drilled holes. Inspectors Name Report Date Inspectors Signature James Huggins 09/01/2022 Inspection Date 09/01/2022 Report Number JAH090122D PHOTOS r r • Y r 1 � Y• 1J. 1 T 11 a,« Applying the Simpson Strong Tie Set XP epoxy into the drilled holes. Reviewers Signature Reviewed By Reviewed Date yZ Teajalam (TJ) Gounden 09/02/2022 5862F683-7407-47C4-A741-9DODOA96FF1A DAILY FIELD REPORT / r AAR TESTING AND INSPECTION, INC. 7126 180th Ave NE, Suite C101 Redmond, WA 98052 425-881-5812 t - a Placing the 5/8" all thread for the hold downs. Inspection Date 09/01/2022 Report Number JAH090122D Epoxy that was used. Inspectors Name Report Date Reviewers Signature Reviewed By Reviewed Date Inspectors signature James Huggins 09/01/2022 ��Nv� �� Teajalam (TJ) Gounden 09/02/2022 5862F683-7407-47C4-A741-9DODOA96FF1A DAILY FIELD REPORT / r AAR TESTING AND INSPECTION, INC. 7126 180th Ave NE, Suite C101 Redmond, WA 98052 425-881-5812 Expiration date of the epoxy that was used. Inspectors Name Report Date Reviewers Signature Reviewed By Inspectors Signature James Huggins 09/01/2022 qjy p'' Teajalam (TJ) Gounden A � Inspection Date 09/01/2022 Report Number JAH090122D Reviewed Date 09/02/2022 5862F683-7407-47C4-A741-9DODOA96FF1A