BLD2010-0114i�
��
Programming
7.6 JumpStart Autoprogramming
JumpStart is intended to be used prior to performing any custom programming. Each time
JumpStart is executed, all options will be reset to their default values. Do not run
JumpStart after you have configured the system through programming.
To run JumpStart:
1. Enter the installer coc
2. Press � or � to dis
play the main menu.
3. Select U for Progxam Menu.
Display reads:
4. Select ❑6 for Syste
��ii��r
�� �� .. .
m Options.
5. Press the � or �' arrow to select "Yes" from the warning screen.
6. Press � .
r
151274
7-39
i
6.2.1 Input Point Mappin
Input points are assigned to input zones.
{Input points can be assigned to one zone
Programming Overview
Any input point can be assigned to any input zone.
only. An input point can be designated as "Unused,"
which means it has not been assigned to a zone.}
Pt.
122
Pt.
123
Pt. 124
Pt.
125
Pt.
126
Pt.
127
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone123
Zone 124
Zone 125
Figure 6-2 Input Point Assignment Example
151274
6-5
f
1ek��'
IR150N Remote Call Station
Specification Sheet
II2150N
ARCHITECTS' AND ENGINEERS'
SPECIFICATION
The remote call station shall be TekTone�'s IR150N or
approved equal. Station features shall include a call placed
indicator, an audio on (intercom in -use) indicator, a call
button and a cancel button. The station shall also include
a 3.5" round speakerlmicrophone with voice response. The
remo#e cait station electronics shall be mounted on a
rugged extruded aluminum panel with black speaker grill.
Connections shall be made via screw terminals.
IL371
Section D
Rev. 9 - 01/2007
As part of the Tek-SAFE'" NC154R Area of Rescue
Assistance System, IR150N Remote Call Stations are used
to provide communication between the area of rescue
assistance stations (in protected stairwells) andthe building
lobby. IR150N Remote Call Stations are located in areas
of rescue assistance to provide two-way hands -free
eommunicafion to a central location from which help
may be summoned.
A call button is provided to initiate calls, and a cancel
button to cancel calls. The call placed indicator provides
cal[ assurance, while the audio on indicator Tights when the
building lobby's master station is listening. A sensitive
speaker microphone permits hands -free communication.
The reliable solid-s#ate circuitry is mounted on a rugged
extruded aluminum panel with black speaker grill.
• Pushbutton calling
Cal! placed yndicator
• Cancel button tv reset cabs
• Audio on indicator lights when lobby is listening
• Sensitive speaker/microphone
Solid-state circuitry
• Rugged extruded aluminum pan�i with black speaker
grill
SPECIFICATIONS
Dimensions: Height: 5" (127 mm)
Width: 6.875" (157 mm)
Depth: 2" (50 mm)
Projects: 0.5" (13 mm)
above mounting surface
Construction: Rugged extruded aluminum panel with
ABS plastic grill
Finish: Brushed aluminum
Speaker/Mic: 3.5" (90 mm) with voice response
Connections: Screw terminals
Housings: TekTone�IH106Nflushmountingbox,
horizontal mount
REQUIRED COMPONENTS
Tek-SAFE` Area of Rescue Assistance System
www.tektone.NET
277 industrial Park Road •Franklin, NC 28734 •Phone (828) 524-9967 •Fax (828) 524-9968
Email: tektone@tektone.net •Technical Assistance Email: teksupt@tektone.net
TekTone�'s quality system is registered by UL� to the ISO 9001:2000 standard. (File #A10766.)