Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
FIR2023-0039+Fire_Alarm_Equipment_Specification_Sheets+4.24.2023_2.43.59_PM+3501719
Honeywell ®SILENT' NIGHT SD500-ARM Addressable Relay Module The SD500-ARM is an addressable device t adds two Form C contacts to the Farenhyt addressable system. The c cts are rated at 2.0 amps C 30 VDC or .6 amp @ 120 VAC. The SD500-ARM allows you to control a wide variety of normally open and normally closed applications, including elevator recall, door closing, fan operation, and auxiliary notification. And, because the relay module is addressable, these applications can be located at any point in the signaling line circuit. COMPATIBILITY The SD500-ARM is compatible with the foil ng Honeywell Silent Knight FACPs: 6820: Addressable fire alarm control panel with up to 1,110 addressable points 6820EVS: Addressable fire alarm control panel with an emergency mass notification system, up to 1,110 addressable points 6808: Addressable fire alarm control panelwith up to 198 addressable points 6700: Addressable fire alarm control panelwi oints 5820XL: Addressable fire alarm control panel 5820XL-EVS: Addressable fire alarm control panel with an emergency communication systems 5808: Addressable fire alarm control panel 5700: Addressable fire alarm control panel FEATURES & BENEFITS • Two sets of Form C contacts. (Double pull/Double Throw relays) • Contacts are rated at 2A @ 30 VDC or .6A C 120 VAC. • Up to 127 relays can be used on each SLC loop. • Relay programming is completely flexible — can be mapped to zone conditions. • Polling LED visible through cover plate. • UL listed, complies with NFPA72. SD500-ARM SD500-ARM Technical Specifications 4-square electrical box SD500-ARM circuit board ` and mounting plate (assembled at the factory) CAUTION REMOVE POWER PRIOR TO SERVICING 4o Honeywell Fit screws through notches on mounting plate. Tighten ' screws to secure to box. TYPICAL MOUNTING FOR SDS00-ARM SPECIFICATIONS PHYSICAL: Mounting:4" square ENVIRONMENTAL Operating Temperature: 32°Fto120°F (01Cto 49`C) Humidity: 0 to 93% relative humidity (non condensing) ELECTRICAL: Standby Current:.55 mA Alarm Current:.55 mA Contact Rating: Form C 2A C 30VDC or .6A C 120VAC For more information Learn more about Honeywell Silent Knight and other products byvisiting www.sitentknight.com Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472 800-328-0103 ORDERING INFORMATION SD500-ARM: Addressable relay module AGENCY LISTINGS AND APPROVALS UL Listed CSFM M EA 429-92-E, Vol 9 FM approved 350218 1 G 111/17 © 2017 Honeywell International Inc. For a complete listing of all compliance approvals and certifications, please visit www.sitentknight.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Silent Knight° and Honeywell' are registered trademarks of Honeywell International, Inc. This document is not intended to be used for installation purposes. We tryto keep our product information up -to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, call800-446-6444. Honeywell SILENT' KNIGHT