The URL can be used to link to this page

FIR2021-0139+Fire_Alarm_Equipment_Specification_Sheets+12.6.2021_2.41.57_PM+25557906820E- FIR2021-0139 Intelligent Fire Alarm Control Panel with Emergency Voice System The 6820EVS panel and accessories provide features to meet the requirements for Mass Notification Systems as described in UL 2572. The 6820EVS is an intelligent addressable Fire Alarm Control Panel combined with an Emergency Voice System (EVS) and are direct replacements for the 5820XL-EVS FACP. When the EVS features are enabled, they are integrated with the fire alarm and voice evacuation functions of the control panel. The emergencyvoice system operations include an onboard supervised microphone. All -call and non -active call buttons can quickly select all active or non -active output groups. The system also allows for emergency messages over fire. The 6820EVS FACP has one built-in signaling line circuit (SLC), which can support 159 SK detectors and 159 SK modules, or 127 SD protocol devices. Additional SLC loops can be added for a maximum of 1110 (SK) or 635 (SD) points per panel. The built-in digital alarm communicator/transmitter (DACT) is dualtechnology, IP and POTS. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator's internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedicated business telephone lines. Although not required, the secondary telephone line may be retained providing backup communication overthe public switched telephone line. Optional cellular reporting is available. The 6820EVS has six onboard Flexput° circuits that can be configured as notification outputs or auxiliary power. The 6820EVS also has a form-C trouble relay, and two programmable form-C relays, along with powerful features such as drift compensation, pre - trouble maintenance alert, a built-in sensor test to comply with NFPA 72 calibration testing requirements, and a calibration trouble alert. A common communications and annunciation link allows up to 17 panels to be connected via copper or fiber optic cable. A designated panel is configured as the communicator for all panels in the link for convenient single -point communications. FEATURES AND BENEFITS RECEIVED Dec 08 2021 CITY OF EDMONDS DEVELOPMENT SERVICES DEPARTMENT • Single enclosure for both fire and • Selectable strobe synchronization for • Two programmable relays and one fixed emergency voice components Amseco°, System Sensor, Wheelock', and trouble relay • Ability to select EVS messages as priority Gentex° devices • Compatible with SWIFT° wireless devices over fire • Built-in DACT with IP and optional cellular • Convenient field-upgradeablefirmware • 15 Recordable one -minute messages that can be mapped to eight EVS buttons • Capable of producing 520 Hztonesto meet NFPA 72 requirements • Supportfor up to 4 LOCs and 8 addressable amplifiers • Expandable SLC loops to 1110 (SK) or 635 (SD) point capacity • Six Flexput circuits for NAC outputs or auxiliary power reporting • Built-in USB interface for quick and easy programming • JumpStart° auto programming reduces installation time • 999 software zones & 999 output groups for flexible design options • 23 preset notification cadence patterns (including ANSI® 3.41) • Allows up to 24 SBUS devices • Four programmable function keys • Network support for up to 17 sites • Network card allows copper network connection with a multi -mode or single - mode fiber connection • Real-time clock/calendar with automatic daylight savings control • History file with 1,000 event capacity Honeywell SILENT' KNIGHT USERINTERFACE LED INDICATORS • General Alarm (Red) • Supervisory (Yellow) • System Trouble (Yellow) • System Silenced (Yellow • System Power (Green) IN:Vk 111 • 12-key numeric pad • Acknowledge • Alarm Silence • System Reset • Drill • F1-F4 Programmable Function Keys PROGRAMMING The 6820EVS system offers several options to simplifyand expedite programming. JumpStart° auto programming minimizes programming required to start a new system. The built-in keypad, or the remote annunciators give on -site access to current system programming. System programming can also be accomplished using the Windows° -based Honeywell Fire Software Suite (HFSS). ORDERING INFORMATION 6820EVS: Addressable fire alarm control panel, red COMPATIBLE EVS EQUIPMENT EVS-50W: 50 Watt amplifier EVS-125W:125 Watt amplifier EVS-100W: 50/100 Watt amplifier EVS-100WBU: External backup amplifier EVS-INT50W: 50 /Watt internal amplifier EVS-CE4: Provides 4 additional audio circuits EVS-RVM: Remote voice module EVS-SW24: 24 switch expander EVS-VCM: Network voice control module EVS-LOC: Local operator console COMPATIBLE SBUS DEVICES 6860: 440 LCD remote fire annunciator with four programmable buttons, red 5860: 420 LCD remote fire annunciator, gray 5860R: 420 LCD remote fire annunciator, red 6855: 4x20 LCD remote fire annunciator, red 5865-3: LED annunciators- display up to 30 LEDs (15 red/15 yellow) 5865-4: LED annunciators- display up to 30 LEDs (15 red/15 yellow). Keyswitches forsilence and reset, and a system trouble LED 5880: LED 1/0 module with 40 programmable LED outputs and eight supervised dry contact inputs 5883: Relay interface. Provides 10 Form C relays 5824: Serial/Parallel printer interface module for printer connection SK COMPATIBLE ADDRESSABLE DEVICES Note: SKand SD devices cannot be mixed in the same fire alarm system. SK-ACCLIMATE: Multi criteria photoelectric smoke detector with thermal 1350F fixed temperature SK-BEAM: Reflected beam smoke detector without test feature SK-BEAM-T: Reflected beam smoke detector with test feature OSI-RI-SK: Reflected beam smoke detector, SK protocol SK-CONTROL: Supervised control module SK-CONTROL-6: Six circuit supervised control module SK-DUCT: Photoelectric duct smoke detectorwith extended air speed range SK-FIRE-CO: Four criteria fire and carbon monoxide detector SK-FIRE-CO-W: Four criteria fire and carbon monoxide detector, white SK-HEAT: Fixed thermal detector (135°F) SK-HEAT-W: Fixed thermal detector (1351F), white SK-HEAT-ROR: Fixed rate of rise detector SK-HEAT-HT: Fixed high temperature heat detector (190°F) SK-HEAT-HT-W: Fixed high temperature heat detector (1901F), white SK-HEAT-ROR-W: Fixed rate of rise detector, white SK-ISO: Fault isolator module SK-MINIMON: Mini monitor module SK-MONITOR: Monitor module SK-MONITOR-2: Dual input monitor module SK-MON-10:10- input monitor module SK-PHOTO: Photoelectric smoke detector SK-PHOTO-W: Photoelectric smoke detector, white SK-PHOTO-R: Photoelectric detector with remote test capability SK-PHOTO-R-W: Photoelectric det. with remote test capability, white SK-PHOTO-T: Photoelectric smoke detector with fixed heat (135°F) SK-PHOTO-T-W: Photoelectric smoke detector with fixed thermal heat (1351F), white SK-PTI R-W: Multi criteria photoelectric smoke detectorwith thermal 135°F fixed temperature, white SK-PULL-SA Addressable single action pull station SK-PULL-DA: Addressable dual action pull station SK-RELAY: Addressable relay module SK-RELAY-6: Addressable Six relay control module SK-RELAYMON-2: Addressable Dual relay/monitor module SK-ZONE: Addressable zone interface module SK-ZONE-6: Six zone interface module SK BASES B210LP: 6" mounting base B501: 4" Flangeless mounting base B200S: Intelligent sounder base Page 2 of 4 — 351606:D • 3/31/2020 B200S-LF: Low -frequency intelligent sounder base B224RB: Relay base B224B1: Isolator base SD COMPATIBLE ADDRESSABLE DEVICES Note: SK and SD devices cannot be mixed in the same fire alarm system. SD505-6AB: Addressable 6" base SD505-6113: Addressable 6" short circuit isolator base SD505-6RB: Addressable 6" relay base SD505-6SB: Addressable 6" sounder base SD500-AIM: Addressable input module (switch input) SD500-ANM:Addressable notification module SD500-ARM: Addressable relay module SD505-DTS-K: Remote test switch/LED indicator for the SD505-DUCTR SD505-DUCT: Addressable Duct Smoke Detector SD505-DUCTR: Addressable Duct Detector housing with relay base SD505-HEAT: Absolute temperature heat detector. Trip point range from 1351F-1500F (0°C-370C) SD500-LIM: Addressable Line isolator module SD500-MIM:Addressable Mini input monitor module (switch input) SD505-PHOTO: Photoelectric smoke detector SD500-PS/-PSDA: Addressable Single or dual action pull station SD500-SDM: Addressable smoke detector module SWIFT WIRELESS DEVICES Note: SWIFT is only compatible with System Sensor (SK) devices. It is not compatible with Hochiki (SD) devices. WSK-WGI: Wireless gateway WSK-PHOTO: Wireless photoelectric smoke detectorwith B501W base WSK-PHOTO-T: Wireless photoelectric smoke detector with fixed thermal detection (135°F) and B501W base W-SYNC: Wireless sync module WSK-HEAT: Wireless, fixed heat detector (135°F) with B501W base WSK-HEAT-ROR: Wireless rate -of -rise heat detector and B501W base WSK-MONITOR: Wireless monitor module WSK-RELAY: Wireless relay module WSK-PULL-DA: Wireless pull station WAV-CRL, WAV-CWL: Wireless AV bases W-USB: Wireless USB radio/antenna donglethat plugs into the USB port of a PC running SWIFT Tools SWIFTTools: Programming and diagnostic utility for the wireless gateway and devices. Available for download from www.farenhyt.com SYSTEM EXPANDERS 6815: SLC Expander for IDP or SK devices 5815XL: SLC expander for SD devices RPS-1000: 6A power supply with 6 Flexput circuits & 2 Form C relays 5496: 6 amp NAC power expander with 4 power -limited output ckts OPTIONAL COMMUNICATORS CELL-CAB-SK: Cellular communicator, metal enclosure w/lock & key CELL -MOD: Cellular communicator, plastic enclosure IPGSM-4G: Dual path fire alarm communicator, cellular and/or IP (primary or backup, selectable) SK-IP-2: Remote reporting via the Internet. Requires a VisorALARM° receiver at the central station MISCELLANEOUS ACCESSORIES SK-NIC: Network Interface Card. Provides a common communications linkforthe IFP-300 SK-NIC-KIT: Installation Accessory Kit SK-FML: Fiber -Optic Multi Mode, transmitter and receiver SK-FSL: Fiber -Optic Single Mode RBB: Remote battery box accessory cabinet SK-SCK: Seismic compliance kit used to fasten batteries to the fire panel SOFTWARE SOLUTIONS SKST: Silent Knight Selection Tool provides the installer or design architect with a Windows° -based software system configuration tool to create a detailed bill of material (BOM) and battery calculations HFSS: Honeywell Fire Software Suite provides remote and local panel programming, detector status, event history and additional data. Databases can be uploaded/downloaded via the panel's USB port using a flash drive. Requires a PC running Microsoft' Windows®. Page 3 of 4 — 351606:D • 3/31/2020 6820EVS TECHNICAL SPECIFICATIONS SYSTEM CAPACITY TEMPERATURE AND HUMIDITY Intelligent Signaling Line Circuits:1 (expandable) Addressable device capacity:1110 (SK) or 635 (SD) Programmable software zones: 999 Output circuits: 6 (expandable) SBUS devices: 24 (16 annunciators, 8 LED modules) LOC units: 4 Addressable amplifiers (total watts): 8 (1000) ELECTRICAL AC Power:120VAC, 60Hz, 2.7A Standby Current:190 mA Alarm Current: 250 mA Flexput Circuits: Terminal block provides connections for (six Class B or three Class A) NACs or auxiliary power. Power -limited, supervised circuitry. Maximum current per circuit: 3 A. Cannot exceed 6A total for all circuits. End -of -line resistor: 4.7k ohm,'/2 watt for Class B NAC Communication Loop: Supervised and power -limited, Class A or Class B, 32VDC, 150mA Two Programmable Relays and One Fixed Trouble Relay: Contact rating: 2.5 A @ 27.4 VDC (resistive), Form C Battery: Cabinet holds maximum of two 18 AH batteries Battery Charger Capacity: 7-35 AH PHYSICAL Dimensions: 21.6" W x 28.1" H x 5.1" D (54.9cm W x 71.4cm H x 13.Ocm D) Weight: 50 lbs. (22.7 kg.) Color: Red Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.sitentknight.com RANGES This system meets NFPA requirements for operation at 0 — 49°C (32-120°F) and at a relative humidity 93%± 2% PH (non - condensing) at 320C ± 20C (90°F ± 30F). However, the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 — 271C/60 — 80°F. NFPA STANDARDS The 6820 complies with the following NFPA 72 Fire Alarms Systems requirements: NFPA 13, NFPA 15, NFPA 16, NFPA 70, NFPA 72 Central station; remote Signaling; Local Protective Signaling Systems; Auxiliary Protected Premises Unit; Water Deluge releasing service. Suitable for automatic, manual, waterflow, sprinkler supervisory (DACT non -coded) signaling services AGENCY LISTINGS AND APPROVALS The listings and approvals below apply to the basic 6820 control panel. In some cases, certain modules may not be listed bycertain approval agencies, or listing may be in process. Consult factory for latest listing status. UL Listed: S2766 CS FM: 7165-0559:0500 FDNY: COA# 6249 FM: Approved 351606 1 D 1 03/20 ©2020 Honeywell International Inc. Honeywell SILENT' KNIGHT �� SCSI `""° El 210V=GT EFT 0LG S Hybrid Surge Protection Device In'"N'.ISAE.CUM " Safety and performance is what Eclips is all about. While there SURGE PRMomm OTECTNE DEVICE � are many varying criteria to be considered for surge protective devices (SPD), if the design engineer neglects the importance there can be serious implications for the client and equipment. Every piece of electrical equipment is designed to operate at a specified nominal voltage. Typically equipment is designed to handle minor variations. However external sources such as lightning, motors, and short circuits cause wild and damaging Install Date_,— LED ON In Servic variations. - p.Dt—,— InspDt_,—. Critical systems wired to your electrical service like Fire Alarm Dt—,— InspDt—, Control Panels (FACP), Mass Notification systems, amplifiers, motors, pumps (HVAC), power boosters and many more must ' K^tee require appropriate levels surge protection. The E120 series is an ideal choice for your 120V AC applications. because it has the robustness not only to absorb a spike, but to clamp long enough to trip the branch circuit breaker and still be functional for additional surges. Standard Features: The number one cause of destruction, degradation and down- time of critical electrical equipment is from power surges and • Available in 120 VAC lightning strikes. • UL Listed 1449 3rd Edition Type 2 & 3 2X to open circuit breaker @5000A The E120V-GT device is an ideal solution to protect equip- ment. UL listed it maintains system integrity and protects • Includes lockout & labels per against transients introduced into / onto electrical lines via poor NFPA 72 2013 10.6.5.2 atmospheric and utility conditions as well as internally gener- • Surface or conduit mounting ated inductive loads and transient TVSS. It reduces system downtime associated with power surges and lightning strikes. • Diagnostic indicator light Prevents destruction and degradation of electrical components • Self restoring in the system. Fix your nuisance and non -billable service calls • 3 Wire device (18" length) as a result of transients and poor power quality and show your customer you care about system integrity. ISO 9001 REGISTERED COMPANY Made In U.S.A. NFPA Uses UL Recognized Components r Space Age Electronics, Inc. www.ISAE.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax Space Age Electronics, Inc. 2013 LT10629 Rev.5 1/2 No Excuses, .lust Solutions! /NSPACEAGE LECTRONICS, INC. Specifications: All 120volt AC equipment will have Transient Voltage Surge Suppression (TVSS) protection manu- factured by Space Age Electronics, Inc., part number El20V-GT ECLIPS Brand. The Unit shall be UL listed to standard 1449 rev 3. The unit will be labeled clearly with indelible ink. Mounting can be con- duit mounted with a Y4" pipe threaded nipple to secure in panel, or surface panel mount with 2 external mounting holes. The unit shall have thermal fuses to protect against fire in short circuit conditions. The E120V will have 18" long, 14 gauge wires (3x) ground wire must be green. The enclosure will be a non dielectric material UL94 QMFZ2/8 grade material providing UV protection. The unit shall provide visual indication (LED) that unit is protecting and functioning. Specifications - Performance: Short Circuit Current Rating (SCCR) Maximum Surge Current (8x20Ns) Enclosure Material Energy Dissipation Joules VPR=700(L — N) 700 (L — G) 600 (N — G) Capacitance : Clamping Response Time: Current : Max Operating Voltage (MCOV) : Clamping Voltage: Design Operation Indicators Surviveability 5KA 25,000 Amps UL94 QMFZ2/8 (green) 500 Joules < 2,000 pf < 5 nanoseconds Non -Load Bearing 140 volts AC, 50/60 Hz 230 Volts RMS Thermally Fused Hybrid LED UL rated X2 @5000 Amps to open Series external circuit breaker Specifications - Compliance: Specifications - Operating: Service Voltage : 120 Single Phase Circuits Protected : L-N L-G N-G Connection Type : Hardwired Installation Configuration : Parallel Specifications - Physical: Weight Dimensions Operation Temperature Mechanical Drav UL Listed : 1449 Third Edition - VZCA 1 5, O File Number: E319370 Vol. 1 Sec. 1 Wiring Diagram: L 2.6" Breaker panel IITO o ° Protected Device O® ® L O O O® ®B O® ®O N O® ®O m O® ®O e ❑ m m m N O G O O O 6\ Space Age Electronics, Inc. www.ISAE.com 800. 886.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax No Excuses, Just Solutions! Ordering Information: Part # Description 5.2oz 2.75" x 1.55" x 4" long -40 to +850 C E120V-GT 120V Hybrid Surge Protective Device ELOCK-FA Circuit Lockout Kit This document is subject to change without notice, see doc # ED0479 for legal disclaimer LT10629 Rev.5 2/2 3 SILENT KNIGHT by Honeywell EVS-CE4 Installation Instructions Specifications The EVS-CE4 adds four audio circuits to the EVS-50W or EVS-125W. The EVS-CE4 mounts inside the EVS-50W or EVS-125W cabinet Note: Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinances. Compatibility The EVS-CE4 is compatible with the IntelliKnight 5820XL-EVS. For more information, refer to Installation manual for 5820XL-EVS (PN LS10061-001 SK-E). Board Layout & Mounting 1. Remove AC power from the EVS-50W or EVS-125W control panel and disconnect the backup batteries. 2. Using the four supplied screws, mount the EVS-CE4 in the EVS-50W or EVS- 125W cabinet as shown in Figure 1. Mounting Screws Mounting Screws Figure 1: Mounting the EVS-CE4 Standby Current: 20 mA Alarm Current: 180 mA Wiring 1. Connect the supplied audio expander cable harness (PN 130426) from the connector labeled Audio Expander on the EVS-50W or EVS-125W to the connector on the EVS-CE4. See Figure 2. EVS-CE4 Connector EVS-50W Audio Expander !MEOW 0, Figure 2: Audio Expander Wire Harness Connections 2. Wire speakers for Class B (Style Y) supervision as shown in Figure 3 or for Class A (Style Z) wiring as shown in P/N LS10070-001 SK-E Rev Al ECN 13-0704 EVS-CE4 Installation Instructions Figure 4. CIRCu1T s CIRCUIT 8 MOMMEMEM MOMMOMME MEMEMEME CIRCUIT CIRCUIT our Figure 3: Class B (Style Y) Speaker Configuration Figure 4: Class A (Style Z) Speaker Configuration 3. Restore AC power and reconnect the backup batteries. SILENT KNIGHT by Honeywell 12 Clintonville Road Northford, CT 06472-1610 USA 203-484-7161 Fax: 203 484-7118 www.silentknight.com © 2013 Honeywell International Inc. P/N LS 10070-001 SK-E Rev Al Honeywell SILK' KNIGHT EVS-50W Intelligent 50 Watt Amplifi The EVS-50W is an intelligent 50 watt amplifier for use with the 5820XL- EVS or 6820EVS. The EVS-50W is used to amplify the audio message for distribution throughout the facility. Since it is designed as a self-contained Illllllkkllllilllllllllllllllllllllllllllllllllll distributed amplifier it can be conveniently located near the area of - protection to reduce wiring demands. Each EVS-50W is capable of producing 50-watts of audio power. Up to four EVS-50W's can be used on the voice evacuation system. The EVS-50W has its own power supplywith battery backup and four speaker circuits which can be expanded to eight speaker circuits with the optional EVS-CE4. The EVS-50W is fully supervised by the main panel for trouble conditions. INSTALLATION The EVS-50W can be surface or flush mou COMPATIBILITY The EVS-50W is compatible with the following Honeywell Silent Knight Series FACPs: • 6820EVS: Addressable fire alarm control panel with an emergency voice system, up to 1,110 addressable points, and four programmable buttons that can be programmed for routine or complex tasks • 5820XL-EVS: Addressable fire alarm control panel with an emergency voice systems and up to 792 addressable points FEATURES & BENEFITS • Integrates directly with Silent Knight Series 6000 panels. Installation is easy as there is no need for special programming or a separate dialer capture module • Battery backup provided by the fire alarm control panel for enhance efficiencies and cost savings • Communicators provide dual path cellular and I reporting capability when combined with 6000 series panels • UL 864 and NFPA 72 code compliant for sole, primary, or backup communications • Accounts can be easily managed through on-line management tools • Remote mount up to 6000 feet to ensure best reception 11 A EVS-50W • Includes Quality of Service (QOS) diagnostics via AlarmNetwhich conveys vital communicator information, including when messages are received, signal strength, and message path used • Programmable supervision time from 1 to 60 minutes • Provides full data reporting using Contact ID format EVS-50W Technical Specifications PHYSICAL Flush Mount Dimensions: 14.5"W x 24.75"H x 3.4"D(36.8Wx62.9 H x8.7 D cm) Overall Dimensions: 16.1"Wx 26.5"H x 4.1"D (40.6 W x 66.7 H x 10.5 D cm) Color: Red ENVIRONMENTAL Operating Temperature: 32°Fto120°F (01Cto 49°C) Humidity: 10 to 93% relative humidity (non - condensing) ELECTRICAL Primary AC: 120 VAC @ 60Hz Standby Current: 85mA C 25 Vrms;100mA C 70.7Vrms Alarm Current: 525mA C 25 rms; 580mA @ 70.7Vrm Total Power: 50W @ 25 Vrms or 70.7Vrms • Circuit 1-4: Rated at 50W each • EVS-CE4 Circuits 5-8: Rated at 50W Main ECS Panel SBUS Standby & Alarm:10mA Battery Charging Capacity: 7 — 35AH Battery Size: 18AH max allowed in cabinet. Use RBB accessory cabinet for larger batteries up to 35AH per system. Voice Integration Wiring: Six conductor Two voice bus Four SBUS T For more information Learn more about Honeywell Silent Knight and other products by visiting www.sitentknight.com Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472 800-328-0103 For a complete listing of all compliance approvals and ORDERING INFORMATION certifications, please visit EVS-50W: Intelligent 50 Watt Amplifier www.sitentknight.com. Microsoft, Windows, and ACCESSORIES the Windows Logo are EVS-CE4: Adds four additional audio circuits to the registered trademarks EVS-50W. or trademarks of Microsoft Corporation. RBB: Remote Battery Box Accessory Cabinet. Use for backup batteries up to 35 AH. Silent Knight° and AB55: Remote Battery Box Accessory Cabinet Use Honeywell' are registered for back batteries up to 55AH and too large to fit trademarks of Honeywell International, Inc into EVS-50W Cabinet. This document is not AGENCY LISTINGS AND APPROVALS intended to be used for UL 864 and UL 2572 installation purposes. We tryto keep our product Meets the requirements for NFPA 72 Local information up -to Protective Signaling Systems & Emergency date and accurate. We Communication Systems. cannot coverall specific CSFM 7165-559:0172 applications or anticipate all requirements. All specifications are subject to change without notice. Doc 350605 1 Rev D 1 05/18 © 2018 Honeywell International Inc. For Technical Support, Please call 800-446-6444. Honeywell SILENT' I<MGHT Honeywell 3SILENT' I<NIGHF Honeywell Silent Knight EVS-LOC Local Operator Console The EVS-LOC local operator console is a powerful addition to any emergency voice system for mass notification purposes. The console is a combination supervised remote microphone and annunciator which is compatible with the EVS-Series Emergency Voice System and meets UL requirements for a local operator console (LOC). The EVS-LOC provides an interface to the 6820EVS Emergency Voice System. It has a supervised on -board microphone for live communications and its annunciator is capable of performing complete operation of the fire alarm system, including silencing and resetting. It has a large 4x40 LCD backlit screen with up to 160 available characters, providing ample space for messaging. The EVS- LOC also has four programmable buttons which can be used to EVS-LOC annunciation, providing 40 programmable LED outputs and eight supervised dry contact inputs. You can use up to eight 5880 modules on one EVS-LOC control panel for maximum flexibility. Its compact size enables it to be mounted inside the EVS-LOC, or in an accessory cabinet. minimize time spent executing complex or routine tasks. About Silent Knight's emergency voice system The 6820EVS is a fire and emergency voice The console's emergency communication system operations includes communication system conveniently integrated an on -board supervised microphone, and all call and non -active call and housed in one panel, and meets buttons that can quickly select all active or all non -active output groups. the requirements for mass notification The system also lets you select an EVS message as a priority over fire. as described in UL 2572. The EVS-CE4 is a useful addition to an EVS-LOC application. It COMPATIBILITY adds four audio circuits to the EVS-50W, EVS-10OW or EVS- 6820EVS: Addressable fire alarm control panel 125W, mappable to 32 buttons controlling selected output with an emergency mass notification system, up to groups. It is very useful for extended coverage and requires no 1,110 addressable points, a large 160 character 4 additional space as it mounts inside the amplifier cabinet. x 40 display, and four programmable buttons that can be programmed for routine or complex tasks The 5880 LED / 10 module can also be used with an EVS-LOC application. Note: It can also be used with existing 5820XL-EVS The module provides an effective means to customize your remote installations FEATURES & BENEFITS • Provides additional communications and control options that are also available in the 6820EVS primary panel • Useful for extending system access to additional areas of a building or mass notification network • Makes access to the communication system easier when immediate and timely communications are essential • The optional VIP-TR trim ring is useful for creating a visual appealing interface between the panel and mounting wall • Up to four EVS-LOCs can be added to a compatible emergency voice system for a total of five command units. This provides additional control options which are critical during emergency events when the 6820EVS panel is not within easy reach. • For added flexibility, it can also accept programmable trigger inputs from external source, such as a Monaco'system, to either the RVM or Silent Knight's 5880. Up to eight inputs are available on the 5880 module. Up to 32 mappable speaker circuits can be connected on the EVS-LOC using a combination of the EVS-50W, EVS-10OW or EVS-125W amplifiers. This is useful for extended reach during times when urgent emergency communication is required. EVS-LOC Technical Specifications EMERGENCY VOICE SYSTEM EXAMPLE EVS-LOG EVS-10OW SBUS SPECIFICATIONS SK.MInlmpn sicoaa 1 npufm-1, Bmone Dxenor wrt 2Wre Notification Monito Relay laclator nleNace MaUule MaEule MOEuIe Motlule 6820EV5 Motlule D. SKA A44� PWI sKAhoto SWlon SK HaH LO sounEer RMey Isdelor UN— D. Bave Bnee Beae sBus Notificati..Auz emaennrune lnteigen Power=L R I? Can® al Sa hk ® FleaP�n Bella, Snana, Homer, -NA Srtrone Deledors Wione COVJ lnpul on Monam CM err RVM System S 6680 Monne LE x fiwe LEDNnnunciatar no u (548045M1oint ORDERING INFORMATION EVS-LOC: Local Operators Console PHYSICAL Overall Dimensions: 20"W x 26.5"H x 5.05"D (50.75 W x 67.3 H x 12.81D cm) Color: Red ENVIRONMENTAL Operating Temperature: 32°F — 120°F (0°C — 49°C) Humidity: 10%— 93% non -condensing ELECTRICAL Standby Current:100mA (6860+ RVM +SW-24) Alarm Current:150mA (6860 + RVM + SW-24) Voice Integration Wiring: Six conductor Two voice bus Four SBUS For more information Learn more about Honeywell Silent Knight and other products byvisiting www.sitentknight.com Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472 800-328-0103 ACCESSORIES EVS-SW24: 24 switch expander VIP-TR: panel trim ring for flush mounting 5880: LED/10 module EVS-CE4: 4 speaker circuit expander AGENCY LISTINGS AND APPROVALS UL 864 and UL 2572 Meets the requirements for NFPA 72 Local Protective Signaling Systems & Emergency Communication Systems CSFM approved 7165-0559:0500 FDNYCOA(pending) INSTALLATION The EVS-LOC can be surface or flush mounted. Doc 3516311 Rev A 110/17 © 2017 Honeywell International Inc. For a complete listing of all compliance approvals and certifications, please visit www.sitentknight.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Silent Knight° and Honeywell' are registered trademarks of Honeywell International, Inc. This document is not intended to be used for installation purposes. We tryto keep our product information up -to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, ca U 800-446-6444. Honeywell SILENT' IQVIGffr NP SERIES - NP7-12 Reliability is your Security Utilizing the latest advance design Oxygen Recombination Technology, Yuasa have applied their 80 years of experience in the lead acid battery field to produce the optimum design of Sealed Lead Acid batteries. FEATURES • Superb recovery from deep discharge. • Electrolyte suspension system. • Gas Recombination. • Multipurpose: Float or Cyclic use. • Usable in any orientation • Superior energy density. • Lead calcium grids for extended life. • Manufactured World wide. • Application specific designs. Technical Features Sealed Construction Yuasa's unique construction and sealing technique ensures no electrolyte leakage from case or terminals. Electrolyte Suspension System All NP batteries utilize Yuasa's unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added. Control of Gas Generation The design of Yuasa's NP batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use. Low Maintenance Operation Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free. Terminals Terminals NP batteries are manufactured using a range of terminals which vary in size and type. Please refer to details as shown. Operation in any Orientation The combination of sealed construction and Yuasa's unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage. Valve Regulated Design The batteries are equipped with a simple, safe low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge. Note. On no account should the battery be charged in a sealed container. General Specifications Nomipal Capacity (Ah) " NP7.12 'S ;2Q,]rfoi,Z5vpc3Q°C,...„' 7 6.4 5.9 Y tarto 3 6,Wp,C 20°C `lm` �„.. 4.2 12' Enar9yRens�YttAt,��nnz,<:�' 91 ; SPegific£neryy{y.��s$xon°>,'; 32 Ink igisista c4(iriQhlS� ,_, 25 Max+rnani dlscharga {A)`�� 40/75 Sh9rt Circuitcu reitklA),, 210 , , , 'Dlmensions (mm) 151 65 iiaigbtaveTarl r`%� �:'� 97.5 � GVai@hk(Kg 2.65 > , A D „3'eryninal,7'brjpa Nm.,;,. « - NP SERIES - NP7-12 Lead Calcium Grids The heavy duty lead calcium alloy gdds provide an extra margin of performance and life in both cyclic and float applications and give unparalleled recovery from deep discharge. Long Cycle Service Life Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected. Float Service Life The expected service life is five years in float standby applications. Separators The use of the special separator material provides a very efficient insulation between plates preventing inter -plate short circuits and prohibiting the shedding of active materials. Yuasa Battery Inc. 2901 Montrose Ave Laureldale, PA 19605 www.yuasabatteries.com Registemi number 1548820 1 Cat. No. N117-12 January OS Long shelf Life The extremely low self discharge rate allows the battery to be stored for extended periods up to one year at normal ambient temperatures with no permanent loss of capacity. Operating Temperature Range The batteries can be used over a broad temperature range permitting considerable flexibility in system design and location. Charge —15°C to 50°C Discharge — 200C to 60°C Storage — 20°C to 50°C (fully charged battery) Distributed by 4,�� SYSTEM Indoor Selectable - Output Horns, Strobes, and Horn Strobes for Wall Applications System Sensor L-Series audible visible notification products are rich with features guaranteed to cut installation times and maximize profits with lower current draw and modern aesthetics. Features • Updated Modern Aesthetics • Small profile devices for Horns and Horn Strobes • Plug-in design with minimal intrusion into the back box • Tamper -resistant construction • Automatic selection of 12- or 24-volt operation at 15 and 30 candela 59 • Field -selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, and 185 • Horn rated at 88+ dBA at 16 volts • Rotary switch for horn tone and two volume selections • Mounting plate for all standard and all compact wall units • Mounting plate shorting spring checks wiring continuity before device installation • Electrically compatible with legacy SpectrAlert and SpectrAlert Advance devices • Compatible with MDL3 sync module • Strobes and Horn Strobes listed for wall mounting only • Horns listed for wall or ceiling use Agency Listings SIGNALING & F M LISTED APPROVED S5512 FM approved except 7125-1653:0504 S4011 for ALERT models 7135-1653:0503 3057383,3057072 The System Sensor L-Series offers the most versatile and easy -to -use line of horns, strobes, and horn strobes in the industry with lower current draws and modern aesthetics. With white and red plastic housings, standard and compact devices, and plain, FIRE, and FUEGO-printed devices, System Sensor L-Series can meet virtually any application requirement. The L-Series line of wall -mount horns, strobes, and horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults. To further simplify installation and protect devices from construction damage, the L-Series utilizes a universal mounting plate for all models with an onboard shorting spring, so installers can test wiring continuity before the device is installed. Installers can also easily adapt devices to a suit a wide range of application requirements using field -selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with two volume selections. AVDS865-05 • 2/22/2018 • Page 1 L-Series Specifications General L-Series standard horns, strobes, and horn strobes shall mount to a standard 2 x 4 x 1 7/8-inch back box, 4 x 4 x 11/2-inch back box, 4-inch octagon back box, or double -gang back box. L-Series compact products shall mount to a single -gang 2 x 4 x 17/8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products for all standard models and a separate universal mounting plate shall be used for mounting wall compact models. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series products, when used with the Sync•Circuit'M Module accessory, shall be powered from a non -coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full -wave rectified unfiltered power supply. Strobes and horn strobes shall have field -selectable candela settings including 15, 30, 75, 95, 110, 135, and 185. Strobe The strobe shall be a System Sensor L-Series Model listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Horn Strobe Combination The horn strobe shall be a System Sensor L-Series Model listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have two audibility options and an option to switch between a temporal three pattern and a non -temporal (continuous) pattern. These options are set by a multiple position switch. The horn on horn strobe models shall operate on a coded or non -coded power supply. Synchronization Module The module shall be a System Sensor Sync•Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize Strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns on horn strobe models over a single pair of wires. The module shall mount to a 411/16 x 411/16 x 21/8-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. Standard Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non -condensing Strobe Flash Rate 1 flash per second Nominal Voltage Regulated 12 DC or regulated 24 DC/FWR1 Operating Voltage Range 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage Range MDL3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal) Input Terminal Wire Gauge 12 to 18 AWG Wall -Mount Dimensions (including lens) 5.6-L x 4.7-W x 1.91-D (143 mm L x 119 mm W x 49 mm D) Compact Wall -Mount Dimensions (including lens) 5.26" L x 3.46" W x 1.91" D (133 mm L x 88 mm W x 49 mm D) Horn Dimensions 5.6-L x 4.7-W x 1.25-D (143 mm L x 119 mm W x 32 mm D) Compact Horn Dimensions 5.25" L x 3.45" W x 1.25" D (133 mm L x 88 mm W x 32 mm D) 1. Full Wave Rectified (FWR) voltage is a non -regulated, time -varying power source that is used on some power supply and panel outputs. 2. Strobe products will operate at 12 V nominal only for 15 cd and 30 cd. AVDS865-05. 2/22/2018 • Page 2 UL Current Draw Data RIJN MFV#1I-jM- T.Mnja; i 1IFFSL*I1ii1mECi11 L max. 8-17.5 Volts 16-33 Volts 8-17.5 Volts 16--,33 Volts Candela DC DC FWR Sound Pattern dB DC DC FWR Candela 15 88 43 60 Temporal High 39 44 54 Range 30 143 63 83 Temporal Low 28 32 54 75 N/A 107 136 Non -Temporal High 43 47 54 95 N/A 121 155 Non -Temporal Low 29 32 54 110 N/A 148 179 3.1 KHz Temporal High 39 41 54 135 N/A 172 209 3.1 KHz Temporal Low 29 32 54 185 N/A 222 257 3.1 KHz Non -Temporal High 42 43 54 3.1 KHz Non -Temporal Low 28 29 54 Coded High 43 47 54 3.1 KHz Coded High 42 43 54 UL Max. Current Draw (rnA RMS), Wall Horn Strobe, Candela Range (115-185 cd) 8-17.5 Volts 16-33 Volts DC Input 15cd 30cd 15cd 30cd 75cd 95cd 110cd 135cd 185cd Temporal High 98 158 54 74 121 142 162 196 245 Temporal Low 93 154 44 65 111 133 157 184 235 Non -Temporal High 106 166 73 94 139 160 182 211 262 Non-Temportal Low 93 156 51 71 119 139 162 190 239 3.1 K Temporal High 93 156 53 73 119 140 164 190 242 3.1 K Temporal Low 91 154 45 66 112 133 160 185 235 3.11K Non -Temporal High 99 162 69 90 135 157 175 208 261 3.1 K Non -Temporal Low 93 156 52 72 119 138 162 192 242 16-33 Volts FWR Input 15cd 30cd 75cd 95cd 110cd 135cd 185cd Temporal High 83 107 156 177 198 234 287 Temporal Low 68 91 145 165 185 223 271 Non -Temporal High 111 135 185 207 230 264 316 Non-Temportal Low 79 104 157 175 197 235 283 3.1 K Temporal High 81 105 155 177 196 234 284 3.1 K Temporal Low 68 90 145 166 186 222 276 3.11K Non -Temporal High 104 131 177 204 230 264 326 3.1 K Non -Temporal Low 77 102 156 177 199 234 291 Horn Tones and Sound Output Data riorn and riorn Strobe.: 8-17.5 16-33 Switch Volts Volts Position Sound Pattern dB DC DC FWR 1 Temporal High 84 89 89 2 Temporal Low 75 83 83 3 Non -Temporal High 85 90 90 4 Non -Temporal Low 76 84 84 5 3.1 KHz Temporal High 83 88 88 6 3.1 KHz Temporal Low 76 82 82 7 3.1 KHz Non -Temporal High 84 89 89 8 3.1 KHz Non -Temporal Low 77 83 83 9" Coded High 85 90 90 10" 3.1 KHz Coded High 84 89 89 " Settings 9 and 10 are not available on 2-wire horn strobes. Temporal coding must be provided by the NAC. If the NAC voltage is held constant, the horn output remains constantly on. AVDS865-05 • 2/22/2018 • Page 3 L-Series Dimensions 1.91, 3.46" 48.5 mm 3.46' 88 mm 1.25" 3.57' 1.55' 88 mm 1.25" 32 mm (9.1 cm) (3.9 cm) 32 mm O O� ° p 0 000 °o°°°o°0°0°9 UP o 0 0°0°0 °°o 000�oo 5.27" .o o.�.L�_i, 133.9 mm 5.27" 000poa 000p000p000°o pOpOpOpO0Op10 5.38" (13.7 cm) O 133.9 mm pp°ppp°ppp°p• ooppooapooapo p°opo°opo°opn 0 oo°°opppopop° R _—_TOO A0548-00 A0547-00 A0557-00 Compact Strobe, Horn Strobe Compact Horn Compact Wall Surface Mount Back Box SBBGRL,SBBGWL 4.70" (11.94 cm) 1.91" (4.85 cm) 1.25" (3.18 mm) Strobe, Horn Strobe A0550-00 L-Series Ordering Information Wall Horn Strobes Horn P2RL 2-Wire, Horn Strobe, Red P2WL 2-Wire, Horn Strobe, White P2GRL 2-Wire, Compact Horn Strobe, Red P2GWL 2-Wire, Comp 2 fils act Horn Strobe, White P2RL-P 2-Wire, Horn Strobe, Red, Plain P2WL-P 2-Wire, Horn Strobe, White, Plain P2RL-SP 2-Wire, Horn Strobe, Red, FUEGO P2WL-SP 2-Wire, Horn Strobe, White, FUEGO P4RL 4-Wire, Horn Strobe, Red P4WL 4-Wire, Horn Strobe, White Wall Strobes SRL Strobe, Red SWL Strobe, White SGRL Compact Strobe, Red SGWL Compact Strobe, White SRL-P Strobe, Red, Plain SWL-P Strobe, White, Plain SRL-SP Strobe, Red, FUEGO SWL-CLR-ALERT Strobe, White, ALERT 1.25.1 4.82" 32 mm (12.24 cm) (4.69 69c cm) 4 UP O ® O 57 O 14.68 cm) o ® o A0549-00 Y A0554-01 Wall Surface Mount Back Box SBBRUSBBWL Horns* HRL* Horn, Red HWL* Horn, White HGRL* Compact Horn, Red HGWL* Compact Horn, White Accessories TR-2 Universal Wall Trim Ring Red TR-2W Universal Wall Trim Ring White SBBWL Wall Surface Mount Back Box, Red SBBWL Wall Surface Mount Back Box, White SBBGWL Compact Wall Surface Mount Back Box, Red SBBGWL Compact Wall Surface Mount Back Box, White Notes: All -P models have a plain housing (no "FIRE" marking on cover). All -SP models have "FUEGO" marking on cover. All -ALERT models have "ALERT" marking on cover. *Horn -only models are listed for wall or ceiling use. 3825 Ohio Avenue • St. Charles, IL 60174 ©2018SystemSensor. SYSTEM Phone: 800-SENSOR2 • Fax: 630-377-6495 Product specifications subject to change without notice. Visit systemsensorcom SENSOR` or current product information, including the latest version of this data sheet. www.systemsensor.com AvosBss-os • 2/22/2018 SILENT Die Cast Metal 1 30, KNIGHT Manual Pull Stations by Honeywell Silent Knight die cast metal manual pull stations put quality and peace of mind in easy reach A manual pull station doesn't have to be fancy —just tough, reliable and extremely easy to operate. Silent Knight's die cast metal pull stations are all three. they're the high -quality choice for fast, sure initiation of a fire alarm signal. Our manual pull stations feature rugged, die cast metal construction that lasts and lasts. they're available in sin- gle or dual action models. And the Silent Knight PS-SATK and PS-DATK pull stations are UL-Listed, CSFM Approved, and MEA (BSA) Approved. For outdoor use, a weatherproof model is also available. On your next job, make the high -quality choice —Silent Knight manual pull stations. For more information, or additional information on our complete fire products line, call Silent Knight at 1-800-328-0103. Description The PS-DATK and PS-SATK manu- al pull stations feature high -quality, die cast metal construction. They are available in either single or dual action configurations with SPST switch, and terminal strip connec- tions. The normally open contact, which closes when the pull station is activated, is rated for 1 amp, at 125 VAC or 30 VDC. The contacts are gold-plated to avoid risk of cor- rosion. All models in the series have been tested by UL for compli- ance to the latest requirements of the Americans with Disabilities Act (ADA). Features • UL listed • CSFM approved • MEA (BSA) approved • ADA compliant • Weatherproof model approved for outdoor use • Single or dual action • Terminal connections • Reset using the same keys as Silent Knight enclosures • Surface mount backboxes avail- able • High -gloss red enamel finish on die cast metal • Corrosion -resistant gold-plated Operation The single action pull stations are operated by simply pulling the han- dle on the front of the Station as far down as it will go, at which point the handle locks into place and is easily visible from up to 50 feet. A scored acrylic break rod is also supplied with each unit for applica- tions where it is necessary. the handle is reset by opening the sta- tion with a key, placing the handle in the normal upright position and relocking the station. On the dual action models, pushing the PUSH bar causes it to rotate inward, allowing the PULL handle to be grasped in a one -handed motion. The dual action models are also supplied with break rods. Dual action models are reset in the same way as a single action model. The weatherproof version of the pull stations is provided with a gas- ket and die cast metal backbox tapped on one end for 1/2" conduit, for surface mounting. PS-SATK Single Action Pull Station PS-DATK contacts Dual Action Pull Station PS-DATK and PS-SATK Die Cast Metal Manual Pull Stations Engineering Specification The PS-SATK and PS-DATK manual pull stations are die cast metal construction painted with red enamel. The pull stations contain the word FIRE in two locations on the front of the units as well as the Silent Knight company logo. Operating instruc- tion are clearly visible on the front of the units. These manual stations contain a key operated reset lock, using a lock plate actuator. The reset key and lock shall be the same as used on the FACP. These manual stations shall contain two terminals for connection to the conventional fire detection loops. Manual stations shall be Underwriters Laboratories Inc. listed and installed within the limits defined in the American Disabilities Act . Specifications Ordering Information Switch Rating: 1 amp at 125 VAC, or 30 VDC. Model Description Pull Station PS-SATK Pull Station, Single Action, Terminal Dimensions: 4-3/4" H x 3-1/4" W x 1-1/8" D Connection, Key Reset Surface Mount PS-DATK Pull Station, Dual Action, Terminal Backbox Connection, Key Reset Dimensions: 4-3/4" H x 3-1/4" W x 2-1/4" D PS-SATK-WP Pull Station, Single Action, Terminal (cast and sheet metal). Connection, Key Reset, Weatherproof Box Color: Red with raised white letters, white PS-WPB Weatherproof Box PULL bar with raised red letters. PS -BB Back Box Accessories: All models are supplied with one scored acrylic break -rod and a key. PS-GR-12 Box of 12 Scored Acrylic Break Rods To Fire Alarm Control Panel Wiring Diagram -Terminal Screw Terminals To Next Device or ELR SILENT This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all KNIGHT specific applications or anticipate all requirements. All specifications are sub- ject to change without notice. For more information, contact Silent Knight by Honeywell 12 Clintonville Road Northford, CT 06472-1610 Phone: (800) 328-0103, Fax: (203) 484-7118. For Technical Support, please call 800-446-6444. www.silentknight.com MADE IN AMERICA P/N 350792 Rev. C © 2014 Honeywell International Inc. E q71_ I t]_ I � 1�71 PS-12350 12V 33.0 AH @ 0-hr. Rechargeable Sealed Lead Acid Battery PS — General Purpose Series NB3: Heavy duty terminal posts with nut and bolt fasteners 1l^� r mm E� — O �I Torque: 3.9-5.4 Nxm e® o�O cm � T i 0 0 ��l alaaea.on.ryee5i. � a nary POWER��,,,ti "iSONIG HT MODEL PS-1235O NB 12 Volt 35.0 Amp. Hr. I� L �I GLOBAL HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power -Sonic Corporation 365 Cabela Dr Suite 300, Reno, Nevada 89523 USA T: +1 619 661 2020 E: customer-service@power-sonic.com T6: Threaded insert with 6mm stud fastener 16mm M6 i 6mm O Torque: 3.9-5.4 Nxm L: 7.68 (195) W: 5.12 (130) H: 6.46 (164) HT: 7.01 (178) Tolerances are +/- 0.04 in. 1 mm) and +/- 0.08 in. 2mm) for height dimensions. All data subject to change without notice. POWER -SONIC EMEA (EMEA - EUROPE, MIDDLE EAST AND AFRICA) Smitspol 4, 3861 RS Nijkerk, The Netherlands T NL: + 31 33 7410 700 T UK: + 44 1268 560 686 T FIR: + 33 344 32 18 17 E: salesEMEA@power-sonic.com 'I Sealed Rechargeable ^1I,�` Battery iflUSiEO BAiiEflY SOLUi10'1a - N10DEL PS-12350 NB 12 Vall 350AmPH1' �s�e,V FEATURES • Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, maintenance free spill proof construction • Power/volume ratio yielding excellent energy density • Rugged vibration and impact resistant ABS case and cover • Gas recombination technology • 5 year design life APPROVALS • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized • IS09001:2015 — Quality management systems Nominal Voltage 12 volts (6 cells) Nominal Capacity 20-hr. (1.65A to 10.80 volts) 35.0 AH 10-hr. (3.07A to 10.80 volts) 33.0 AH 5-hr. (5.61 A to 10.50 volts) 28.1 AH 1-hr. (20.7A to 9.60 volts) 20.7 AH Approximate Weight 23.15 lbs. (10.5 kg) Internal Resistance (approx.) 12.0 milliohms Max Short -Duration Discharge Current (5 Sec.) 495.0 amperes Shelf Life (%of nominal capacity at 68°F (20°C) 1 Month 3 Month 6 Month Operating Temperature Range Charge Discharge Case Power Sonic Chargers 97% 91% 83 % 32°F (0°C) to 104°F (40°C) 5-F (-15-C) to 122-F (50-C) ABS Plastic PSC-124000-PC PSC-124000A-C To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power -Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E SHELF LIFE & STORAGE 100 5°C o� 2 80 c Standing Period (Months) CHARGING Cycle Applications: Apply constant voltage charge at 2.35v/c — 2.45v/c (14.1 — 14.7v for 12v Monobloc) at 20°C Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. "Float" or "Stand -By" Service: Apply constant voltage charge of 2.25v/c — 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifications. APPLICATIONS • General purpose • Medical • Emergency lighting • Fire and security GLOBAL HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power -Sonic Corporation 365 Cal Dr Suite 300, Reno, Nevada 89523 USA T: +1 619 661 2020 E: customer-service@power-sonic.com POWER -SONIC EMEA (EMEA - EUROPE, MIDDLE EAST AND AFRICA) Smitspol 4, 3861 IRS Nijkerk, The Netherlands Ti +31 337410700 T UK: + 44 1268 560 686 T FR: + 33 344 32 18 17 E: salesEMEA@power-sonic.com PS-12350 12V307AH@10-hr. Rechargeable Sealed Lead Acid Battery PS - General Purpose Series LIFE CHARACTERISTICS IN STAND—BY USE 100 � R o R r 80 �Q 60 c 40 d > iv 20 a 0 0 1 Ambient Temperature 20°C (68°F) Float Charging Voltage 2.25 - 2.30 V/Cell 17 2 3 4 5 Years CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have difficulty in locating a suitable charger. FURTHER INFORMATION Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc. Sealed Battery i4,,,,,,,,�/C a" o�s , nusrEo egrrEnr MODEL PS-12350 NE 12111 35.0W Nr. 1 To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power -Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E CP� POTTER The Symbol of Protection patent pending C I DULUS LISTED S2930 7315-0328:0189 Product includes a 5 year warranty Dimenions: 16 1/8"W x 16 3/4"H x 3 1/2"D Stock Number: 3006436 PSN-64 Red Enclosure 3006437 PSN-106 Red Enclosure 3006446 PSN-106 Black Enclosure PSN SERIES POWER SUPPLY UL, cUL, CSFM Listed • PSN-64 has 6 amps regulated with 4 Outputs • PSN-106 has 10 amps regulated with 6 Outputs • Outputs Rated at 3 amps maximum each • May be configured as up to three class "A" Style "Z" notification circuits • 3 amp, 24 VDC programmable output power • Supervised Battery Charger: 27.3 @ I (supports 7-55 AH batteries) • Easy to install cabinet with leveling mounts and key lock • Wiring knockouts provided on sides and top of cabinet • Two Trouble Relays (5A at 30VDC) General System Trouble (programmable for AC delay) Low AC Trouble with optional delay settings • Diagnostic LED's Status LED's for Active NAC and NAC trouble conditions Status LED's for Earth Fault(Amber),AC (Green), Battery Fault (Amber) • Trouble Memory feature captures troubles which have previously restored • Synchronized notification appliance circuits Potter/AMSECO®, Wheelock®, Gentex®, System Sensor® • Configurable output circuits (DIP switch sets options for each circuit) • 15 mA at 8-33 VDC input trigger • Reference EOL allows 2K — 27K EOL value to be used • Quadrasync provides panel wide synchronization of same or multiple brands • PassThru mode allows the Outputs to match the Input Signal Electrical Specs: • 120/240 VAC 50-60 Hz input • 5.1 Amps @ 120 VAC or 2.5 Amps @ 240 VAC • Battery Standby Current 75 mA • Alarm Standby Current 75 mA (no external load) Terminals support 12 - 18 AWG wire. Description The PSN series of notification power supplies offers reliable notification Sensor® strobe devices. Each output can be configured the same sync power with unprecedented versatility. The power supplies offer either protocol or set independently. 6 or 10 amps of continuous power through 4 or 6 outputs respectively. In addition, the panel has an input PassThru mode allows the outputs Each output is rated at 3 amps and it may be used continuously without to follow the input signal and sync up the input flash. The panel will any derating. recognize the type of input being supplied and pass this through to the The power supply operates on either 120 VAC or 220 VAC power input and has a regulated 24 VDC output. In addition, the panel can charge up to 55 AH batteries and leads the industry in housing up to 18 AH batteries. The cabinet is constructed out of 18 gauge cold rolled steel and has a durable red powder coat finish. In addition, a key lock is provided for securing the door. Ample electrical knockouts are provided on the sides and the top, allowing the installer options for running wires and maintaining the correct separations. The power supply offers an industry leading Quadrasync function that allows formultiple strobe circuits of different brands to be synchronized to flash at the same time. The panel can have four different brands each connected to its own circuit and all of the strobes flash together. Each output can independently be configured to provide one of outputs with the same pattern. This input pass through can be selected on each output independently. The power supply contains simple dipswitch programming and LED indications providing the installer indications of the operation and the ability to correct any faults. A Trouble Memory is provided to allow an installer to review past troubles and make the necessary repairs. Each output has an LED to pin point the exact circuit where a problem may have occurred. Relays are provided for monitoring the general system and AC failure. Each output and be independently configured for various applications and installations. Each output can be independently configured for Class A or Class B operation, constant power, ANSI Temporal Code 3, Single, Multiple or Combo Inputs or Door Holder Power. four synchronizations or steady power. This provides unequivocal flexibility in new and retrofit installations. The panel can be configured to synchronize Potter/AMSECO®, Gentex®, Wheelock® and System Potter Electric Signal Co., LLC • St. Louis, MO • Cust Service: 866-240-1870 • Tech Support: 866-956-1211 • Canada 888-882-1833 • www.pottersignal.com PRINTED IN USA MKT. #8910013 - REV D PAGE 1 OF 2 1/18 CP� POTTER The Symbol of Protection PSN-106 Wiring Diagram PSN SERIES POWER SUPPLY 4 120/240 VAC GND FAULT Jumper Position DETECT ENABLE ON o o n OFF 120VAC 50Hz-60Hz 240VAC 50Hz-6OHz Black Connect to separate White unswitched AC circuit Ground star LBD s 77E NACI NAC2 NAC3 NAC4 NAC5 NAC6 DCPWR ®®® aaaBBaaa aaaaaaae El eases 3I H N 3 0 Fuse COMM • Elo eases s2 �❑ ° ° ° AM o eases s4 Factory Installed Interconnect. AC Power o aaaae S5 Low Battery 0 Ccroon t ❑ ❑ ❑ ❑ ❑ ❑ 0 eases Sfi 8 ❑ seas El ❑❑❑❑❑❑ Bulk Options El❑�❑ El ❑ WRIMMMAC ® ® ® ® ® O ® "NAINAC2 Q O Q NAC3 NAC4 NA 5 NACb CP R REF I M2 Q + _ NC COM N\ O NC COM NO �Be[tery+ Common relays are Battery - non -power limited. Battery connection (non -power limited). Use two (2)12V batteries connected in series. Engineering Specification The contractor shall supply and install the Potter PSN power supply. The power supply shall operate on either 120 or 240 VAC input. The panel shall be capable of continuous load power without any degradation to the main supply or the distribution board. The cabinet shall be capable of housing up to 18 AH batteries and the panel shall be capable of charging up to 55 AH batteries in an external cabinet. The panel shall have dip switches for simplistic configuration of the system and LEDs to provide visual indication to the installer of the status of the system. The dip switches shall allow forAC power delay selection, Class A/B operation per output, Door Holder Power options, constant auxiliary power, trigger input type, ANSI Code 3 Temporal Code, Pass Thru (input tracking), Potter/AMSECO® sync, Gentex® Sync, System Sensor® Sync or Wheelock® sync. The LEDs shall provide indication of communication between the power supply and distribution circuit 2 I 1 ReE.O.L. E.O.L. DC Power Trigg, Note: PSN-64 and PSN-106 draw 15 mA when polarity reverses and the power supply is triggered. There is no current draw in Standby Mode. assemblies. The LEDs shall have distinct flash patterns to provide further indication of the troubles present. The panel shall have selectable Trouble Memory to provide the installer an indication that a past trouble existed on a circuit for diagnostic purposes. Each output of the power supply shall be capable of 3 amps of continuous power without degradation over time. The power supply shall provide for multiple circuits of strobe appliances. The power supply shall synchronize the flashes of any of the above listed strobe appliances on a per circuit basis. Up to four different strobe circuits may be connected and all of the strobes shall flash in unison as required by UL 864. In addition to this Quadrasync feature, the panel shall allow any of the four above mentioned sync patterns as an input and pass this signal through and synchronize the outputs to match the input flash pattern. PRINTED IN USA MKT. #8910013 - REV D PAGE 2 OF 2 1/18 '-p 1W Multi -Criteria Photo/Thermal/Infrared Detector The SK-PTIR-W is an intelligent, multi -criteria detector that combines photoelectric, thermal, and infrared (PTIR) sensors in one unit to sense multiple components of a fire. . i This multi -sensor approach on the SK-PTIR-W (replaces the SK-ACCLIMATE) enables enhanced sensitivity to real fire with heightened immunity to nuisance particulates. Multiple - - sensors and communication can greatly reduce nuisance alarms compared to single sensing methods. Sophisticated algorithms maximize the advantages of all four sensor types creating our best detection strategy offering heightened immunity to nuisance particulate and enhanced sensitivity to real fire. • Photoelectric sensor detects airborne particles associated with smoke. • Thermal sensor detects heat and rate -of -rise (135°F fixed temperature threshold). • Infrared sensors discern light patterns in the environment as an additional data point for alarm determination. This abilityto reject certain nuisance alarm triggers, such as theater smoke, supports the use of the detector in applications where moderate to heavy nuisance conditions exist that might cause single sensing detectors to trigger a false alarm. The PTIR detector meets both UL 268 7th edition and UL 521 listing requirements and can indicate distinct smoke and heat alarms. This dual nature supports a local alarm setting for photoelectric detection and a general evacuation setting based on thermal detection. This can minimize work interruptions in multi -level buildings. FEATURES AND BENEFITS • UL 268 7th Edition and UL 521 Listed • Rotary address switches • Multi -criteria detection • Dual LEDs for 3601 visibility • Analog communications • New modern profile Honeywell • Low standby current • Expanded color options SILENT' IQVIGHT SK-PTIR-W TECHNICAL SPECIFICATIONS PHYSICAL/OPERATING ORDERING INFORMATION Dimensions: • Height: 2.0 inches (51 mm) installed in B300-6 base • Diameter: 6.2 inches (156 mm) installed in B300-6 base; 4.1 inches (104 mm) installed in B501-WHITE/-IV/-BL base • Weight: 3.4 oz. (95 g) Operating Humidity Range: 15% - 90% Relative Humidity, Non -condensing Operating Temperature Range: 32°F - 100°F (0°C - 38°C) Air Velocity: 0 - 300 ft/min. (0 - 91.4 m/min.) ELECTRICAL Operating Voltage Range:15 to 32 VDC Operating Current @ 24 VDC: 200 uA (one communication every 5 seconds with green LED blink on communication) Maximum Alarm Current: 2 mA C 24 VDC (one communication every 5 seconds with red LED solid on) Maximum Current: 4.5 mA @ 24 VDC (one communication every 5 seconds with amber LED solid on) Isolator Load Rating: 0.0063 STANDARDS The devices in this datasheet meet the standards of UL 268 7th Edition. AGENCY LISTINGS AND APPROVALS The listings and approvals below apply to the SK-PTIR-W. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult the factory for the latest listing status. • UL: S6173 • FM Approved • CSFM:7272-0559:0517 Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.sitentknight.com SK-PTIR-W: Multi -criteria photoelectric, thermal and infrared smoke detector, white color Bases: B501-WHITE:4" Mounting base, white B501-WHITE-BP:4" mounting base, white, 10-pack B501-IV:4" Mounting base, ivory B501-BL:4" Mounting base, black B300-6:6" Flanged mounting base, white B300-6-BP: 6" Flanged mounting base, white, 10-pack B300-6-IV: 6" Flanged mounting base, ivory B20OS-WH: Intelligent addressable sounder base, white B20OS-IV: Intelligent addressable sounder base, ivory B20OS-LF-WH: Intelligent addressable sounder base, low -frequency, white B20OS-LF-IV: Intelligent addressable sounder base, low -frequency, ivory B224BI-WH: Isolator base, white B224BI-IV: Isolator base, ivory B224RB-WH: Relay base, white B224RB-IV: Relay base, ivory Accessories: SMB600: Surface mounting kit (flanged) TR300: Trim ring, white TR300-IV: Trim ring, ivory CK300-IR: IR color kit (includes cover and trim ring), white, 10-pack CK300-IR-IV: I R color kit (includes cover and trim ring), ivory,10-pack CK300-IR-BL: I color kit (includes cover and trim ring), black, 10-pack RA10OZ: Remote LED annunciator M02-04-00: Detector test magnet M02-09-00:Telescoping test magnet SK-62008 I C 1 07/19 ©2019 Honeywell International Inc. Honeywell SILENT' ICNIGHT SB-1/0 Surface Mount Back Box The SB-1/0 Surface Mount Back Box is for use with the PS -SA and PS-DA models of pull stations. In addition to being molded out of increased UV stabilized polycar- bonate material (94V-0), the SB- I/O`s mounting holes and bottom conduit entry are molded with a thin wall of material to provide improved outdoor weatherability. Features: • UL Listed for indoor and outdoor applications • Molded Self -Sealing Mounting Bosses • CSFM Listed • Snap Latches for Easy Installation of the Pull Station • Two Reinforced 1/2" NPT Connector Outlets (One Plug Included) • Single -gang Electrical Box Mounting Holes (Knockout) • Four #10 x 1.00" Mounting Screws Included 3 ]LENT KNIGHT byr HOn"811 S B-1/O Surface Mount Backbox Easy to Install, U.L. listed for Indoor and Outdoor Applications. Compatibility The SB-1/0 is compatible with the following pull sta- tions: PS-DA PS -SA SB-1/0 shown assembled to Pull Station (Pull Station Sold Separately) SILENT This document is not intended to be used for installation purposes. We MADE IN AMERICA KNIGHT try to keep our product information up-to-date and accurate. We cannot P/N 350052 cover all specific applications or anticipate all requirements. All specifica- © 2008 Honeywell International Inc. Hpn �I tions are subject to change without notice. For more information, contact by Silent Knight 7550 Meridian Circle Suite 100, Maple Grove, Mn 55369- 4927. Phone: (800) 328-0103, Fax: (763) 493-6475. 4,�� SYSTEM Audible Visible Accessories System Sensor L-Series offers a wide range of Audible Visible (AV) accessories to enable you to meet a variety of application requirements. Features MP120KL Mounting Plate • Designed for both indoor and outdoor use • Plug-in design eliminates ground faults • Power supply that converts 120 VAC to nominal 24 V FWR • Compatible with all two -wire L-Series devices Color Lens Attachments • Easily turns any device into a strobe for ECS/MNS events: severe weather, toxic gases, sprinkler activation and more • Outdoor rated from —35°F to 151°F • Wall- or ceiling -mount lenses available • UL 1638 listed Bezel Kits • Easily turn a Fire or Plain device into a device to meet ECS/MNS requirements • Bezel kits available for strobes, horns, chimes, horn strobes, chime strobes and speaker strobes • Bezels options with FIRE, ALERT, EVAC, AGENT, PLAIN, FUEGO, FOGO printing • For use with L-Series devices only • Operating temperature -40oF to 15loF Agency Listings U` F M> 0 LISTED APPROVED S5512 FM approved : 7125-1653:0504 S4011 Sync modules and MP120KL. 7135-1653:0503 S4048 3057383:3057072,3057493 Does not include color lenses. The MP120KL Mounting Plate is designed to use 120 VAC to power SpectrAlert Advance horns, strobes, horn strobes, chimes, and chime strobes. Color Lens Attachments install easily on any L-Series strobe devices to provide distinctive visual signaling. Bezel Kits enable installers to easily turn any L-Series Fire or Plain device into a device that meets ECN/MNS requirements. Bezel kits are available for all varieties and footprints of L-Series products and come in FIRE, ALERT, EVAC, AGENT, FUEGO, FOGO, and Plain options making customization easy. Universal Trim Rings for wall and ceiling mount devices allow for additional space within the backbox. L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to. The Sync -Circuit Module synchronizes L-Series strobes at 1 Hz and horns and chimes at temporal 3 over a single pair of wires. Patented module technology also allows the silencing of horns or chimes on horn strobe and chime strobe models over a pair of wires. See the Sync•Circuit Datasheet for more information. Specifications 120 VAC mounting plate model MP120KL shall be listed to UL 464 for fire protective signaling systems. The mounting plate shall power a two - wire L-Series horn, strobe, horn strobe, chime or chime strobe from a 120 VAC supply converted to nominal 24 V FWR. For indoor applications, the mounting plate shall be installed in a 4x4x21/8 -inch junction box. MP120KL may be used with any of the following products at all horn and strobe settings: P2RL, P2WL, P2RL-P, P2WL-P, P2RL-SP, P2WL-SP, PC2RL, PC2WL, SRL, SWL, SRL-P, SWL-P, SRL-SP, SWL-CLR-ALERT, SWL-ALERT, SCRL, SCWL, SCWL-CLR-ALERT, HRL, HWL, CHRL, CHWL, CHSRL, CHSWL, CHSCRL, CHSCWL. Standard Operating Temperature —40°F to 151 °F (-40oC to WC) Humidity Range 10 to 93% non -condensing (indoor products) Nominal Voltage Regulated 120 VAC Operating Voltage Range 96-132 VAC Current Draw From AC Line 150 mA max. The System Sensor L-Series bezels are for installation with strobes, horns, chimes, horn strobes, chime strobes, and speaker strobes. Bezels are offered in red and white for both wall and ceiling devices. Available in FIRE, ALERT, EVAC, AGENT, Plain (no marking), FUEGO, and FOGO. Operating temperature shall be -40oF to 151 oF. Specifications The System Sensor L-Series colored lens attachments shall be approved for fire protective service as listed in UL 1638. The lens attachments shall only be used with plain (no "FIRE" print) System Sensor strobe devices or in conjunction with a non -fire printed bezel. The lens shall mount to any wall- or ceiling -mount strobes and shall be rated from —35°F to 151 °F. Compatibility Colored lens attachments may be used with the following System Sensor L-Series plain (non -FIRE -printed) strobe models: P2RL-P, P2WL-P, SRL-P, SWL-P, SPSRL-P, SPSWL-P, SPSCWL-P, or any device used with a non -FIRE printed bezel. Colored Lens Installation Installation to Wall -Mount Strobe Installation to Ceiling -Mount Strobe Ordering Information ,. ..Part n. . Description Surface Mount Back Box Colored Lenses SBBRL Red, wall -mount, compatible with standard LENS-132 Wall -mount, blue horns, strobes, horn strobes, chimes and chime LENS-R2 Wall -mount, red strobes LENS-G2 Wall SBBWL White, wall -mount, compatible with standard -mount, green horns, strobes, horn strobes, chimes and chime LENS-A2 Wall -mount, amber strobes LENS-BC2 Ceiling -mount, blue SBBSPWL Red, wall -mount, compatible with speakers and LENS-RC2 Ceiling -mount, red speaker strobes LENS-GC2 Ceiling -mount, green SBBSPWL White, wall -mount, compatible with speakers LENS-AC2 Ceiling -mount, amber and speaker strobes SBBCWL Red, ceiling -mount compatible with horns, Retrofit Plates strobe, horn strobes, chimes, chime strobes, (For use with horn strobe & speaker strobe devices) speakers and speaker strobes RFPW 9.5" x 7" white SBBCWL White, ceiling -mount, compatible with horns, RFP 9.5" x 7" red strobe, horn strobes, chimes, chime strobes, Mounting Plate speakers and speaker strobes MP120KL 120 VAC Adapter Mounting Plate SBBGWL Red, wall -mount, compatible with compact horns, strobes, horn strobes Sync Modules SBBGWL White, wall -mount, compatible with MDL3W White, 12/24 volt Sync -Circuit module compact horns, strobes, horn strobes MDL3R Red, 12/24 volt Sync -Circuit module Bezels" Trim Rings BZR Wall Red Bezel Kit TR-2 Universal wall trim ring, red, 6.3" x 8.2" BZW Wall White Bezel Kit TRC-2 Universal ceiling trim ring, red, diameter 8.5" BZGR Compact Wall Red Bezel Kit TR-2W Universal wall trim ring, white, 6.3" x 8.2" BZGW Compact Wall White Bezel Kit TRC-2W Universal ceiling trim ring, white, diameter 8.5" BZRC Horn Strobe Ceiling Red Bezel Kit BZWC Horn Strobe Ceiling White Bezel Kit BZSPR Speaker Wall Red Bezel Kit BZSPW Speaker Wall White Bezel Kit BZSPRC Speaker Ceiling Red Bezel Kit BZSPWC Speaker Ceiling White Bezel Kit "Each bezel pack ships in a package of 5. For desired bezel option add -F (FIRE), -AL (ALERT), -EV (EVAC), -AG (AGENT), -P (Plain), -SP (FUEGO), -PG (FOGO) for desired printing. 0� SYSTEM 3825 Ohio Avenue • St. Charles, IL 60174 ©2017 System Sensor. Phone: 800-SENSOR2 • Fax: 630-377-6495 Product specifications subject to change without notice. visit systemsensorcom SENSO® for current product information, including the latest version of this data sheet. R www.systemsensor.com AVDS87001.03-17 VnATmW SERIES Addressable Heat Detectors The Silent Knight"' SK-HEAT-W Series heat detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and advanced thermal technologies make the SK-HEAT-W Series ideal for both system operation and building design. The series includes a 1351F/571C fixed -temperature, rate -of -rise, and a 1801F/881C fixed high -temperature detectors and are direct replacements for the SK-HEAT Series heat detectors. The point ID address, set using rotary decimal switches, provide specific detector locations. These thermal detectors provide effective, intelligent property protection in a variety of applications. • SK-HEAT-W offers 135OF fixed thermal detection. • SK-HEAT-ROR-W offers 1350F fixed and rate -of -rise thermal detection. • SK-HEAT-HT-W provides fixed high -temperature detection at 190°F. FEATURES AND BENEFITS • Designed to meet UL 268 7th Edition • Sleek and stylish contemporary design • Advanced thermal technology for fast response • Fixed temperature model(SK-HEAT-W) factory preset to 135°F (57°C) • Rate -of -rise model (SK-H EAT-ROR-W), 15°F (8.3°C) per minute • High temperature model (SK-HEAT-HT-W) factory preset to 190OF (88°C) • Addressable by device • Rotary, decimal addressing (Refer to the Silent Knight panel manuals for device capacity) • Two -wire SLC connection • LEDs blink everytime the unit is polled • 3600-field viewing angle of the visual alarm indicators (two bi-color LEDs); LEDs blink green in Normal condition and turn on steady red in Alarm • Integral communications and built-in device -type identification • Remote test feature from the panel • Built-in functional test switch activated by external magnet • Walk testwith address display (an address of 121 will blink the detector LED 12- (pause)-1) • Low standby current • Built-in tamper -resistant feature • Designed for direct -surface or electrical - box mounting • Sealed against back pressure • Plugs into separate base for ease of installation and maintenance • SEMS screws forwiring of the separate base • Optional remote, single -gang LED accessory • Optional sounder, relay, and isolator bases • Optional flanged surface mounting kit Honeywell SILENT' KNIGHT APPLICATIONS Use thermal detectors for protection of property. For further information, refer to manual 156-6529, Applications Manual for System Smoke Detectors, which provides detailed information on detector spacing, placement, zoning, wiring, and special applications. INSTALLATION The SK-HEAT-W Series plug-in intelligent thermal detectors use a separate base to simplify installation, service, and maintenance. Installation instructions are shipped with each detector. Mount base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. For a chart of compatible junction boxes, see SK-61045. Note: Because of the inherent supervision provided bytheSLC loop, end -of -line resistors are not required. Wiring 7-taps" or branches are permitted for Style 4 (Class "B") wiring. Note: When using relay or sounder bases, consult the SK-ISO installation sheet 156-3627 for device limitations between isolator modules and isolator bases. PRODUCT LINE INFORMATION SK-HEAT-W: White, low -profile intelligent 1351Ffixed thermal sensor SK-HEAT-ROR-W: White, low -profile intelligent rate -of -rise thermal sensor SK-HEAT-HT-W: White, low -profile intelligent 190°F fixed thermal sensor B300-6: White, standard flanged low -profile mounting base B300-6-BP: Bulk pack of B300-6, package contains 10 B300-6-IV: Ivory, standard flanged low -profile mounting base B501-WHITE: White, standard European flangeless mounting base B501-BL: Black, standard European flangeless mounting base B501-IV: Ivory, standard European flangeless mounting base B501-WHITE-BP: Bulk pack of 3501-WHITE, contains 10 B200S-WH: White, Intelligent, programmable sounder base B200S-IV: Ivory, Intelligent, programmable sounder base B200SR-WH: White, Intelligent sounder base for retrofit applications B200SR-IV: Ivory, Intelligent sounder base for retrofit applications B200S-LF-WH: White, Low Frequency Intelligent, programmable sounderbase B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable sounderbase B200SR-LF-WH: White, Low Frequency Intelligent sounder base for retrofit applications B200SR-LF-IV: Ivory, Low Frequency Intelligent sounder base for retrofit applications B224RB-WH: White, plug-in System Sensor' relay base B224RB-IV: Ivory, plug-in System Sensor relay base B224BI-WH: White, plug-in System Sensor isolator detector base B224BI-IV: Ivory, plug-in System Sensor isolator detector base ACCESSORIES TR300: White, replacement flange for B210LP or B300-6 bases TR300-IV: Ivory, replacement flange for B21OLP or B300-6 bases RA100Z(A): Remote 3 - 32 VDC LED annunciator, mounts to a U.S. single -gang electrical box, for use with B501 and B300-6 bases only M02-04-00: Test magnet M02-09-00: Test magnet with telescoping handle CK300: White, detector color kit, pack of 10 CK300-IV: Ivory, detector color kit, pack of 10 CK300-BL: Black, detector color kit, pack of 10 Page 2 of 3 — 351637:13 • 7/1/2019 SK-HEAT-W SERIES TECHNICAL SPECIFICATIONS PHYSICAL/ENVIRONMENTAL Size: 2.0" (5.3 cm) high; base determines diameter -B300-6: 6.1" (15.6 cm) diameter -B501: 4" (10.2 cm) diameter For a complete list of detector bases, see S K-61045. AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document.In some cases, certain modules or applications may not be listed bycertain approval agencies, or listing may be in process. Consult factory for latest fisting status. Operating temperature range: SK-HEAT-W, . UL Listed: S6228 SK-HEAT-ROR-W:-4°Fto 100OF • FM Approved (-20°C to 38°C) • CSFM: 7270-0559:0511 S K-H EAT-HT-W: -4° F to 150O F (-20°C to 66°C) Detector spacing: UL approved for 50 ft. (15.24 m) centerto center; FM approved for 25 x 25 ft. (7.62 x 7.62 m) spacing Relative humidity: 10% — 93% non - condensing Thermal ratings: Fixed -temperature set point 135°F (5710, rate -of -rise detection 15°F (8.3°C) per minute, high temperature heat 190°F(88°C) ELECTRICAL SPECIFICATIONS Voltage range:15 - 32 volts DC peak Standby current (max. avg.): 200uA @ 24 VDC (one communication every 5 seconds with LED enabled) LED current (max.): 4.5mA @ 24 VDC ("ON") Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.sitentknight.com 351637 1 B 1 07/19 ©2019 Honeywell International Inc. Honeywell SILENT' KNIGHT Honeywell ®SILENT' I acir SK-MINIMON Intelligent Mini Monitor Mom The SK-MINIMON is an addressable monitor modules for use with the Honeywell Silent Knight fire alarm control panels (FACPs). The SK- MINIMON acts as an interface to contact devices, such as waterflow switches and pullstations.The SK-MINIMON supports Class B supervised wiring to the load device. Conventional4-w' smoke detectors can be monitored for alarm and trouble conditions The SK-MINIMON can be mounted in a sin ang junction box directly behind the monitored device. Its small size light weight allow it to be installed without rigid mounting requireme INSTALLATION The SK-MINIMON can be mounted in a single gang junction box directly behind the monitored device. Its small size and light weight allow it to be installed without rigid mounting requirements. FEATURES & BENEFITS • Single contact monitor • Rotary address • SK-Minimon support switches for fast for Class B (Style B) installation contact monitor wiring • UL Listed • Small and lightweight • CSFM Listed size allows for flexible . FM Approved mounting options I as SK-MINIMON SK-MINIMON Technical Specifications PHYSICAL Dimensions: 2.75" W x 1.3" H x 0.5" D Weight: 1.2 oz (37 g) ELECTRICAL Operating Voltage: 15 — 32VDC SLC Standby and Alarm Current: 350 µA End -of -Line Resistance:47Kf2 Initiating device circuit wiring resistance: 1,500f2 max SLC loop resistance: 40Q max Wire Length: 6" min. ENVIRONMENTAL Operating Temperature: 32°F — 120°F (0°C — 49°C) Humidity: 10%— 93% non -condensing For more information Learn more about Honeywell Silent Knight and other products by visiting www.sitentknight.com Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472 800-328-0103 ORDERING INFORMATION SK-MINIMON: Mini monitoring module COMPATIBILITY The SK-MINIMON is compatible with the following Honeywell Silent Knight fire alarm control panels: 6820: Addressable fire alarm control panel 6820EVS: Addressable fire alarm control panel with an emergency voice system. 6808: Addressable fire alarm control panel 6700: Addressable fire alarm control panel 5700: Addressable fire alarm control panel 5808: Addressable fire alarm control panel 5820XL: Addressable fire alarm control panel 5820XL-EVS: Addressable fire alarm control panel with an emergency voice system Doc 350133 1 Rev G 1 11/17 © 2017 Honeywell International Inc. For a complete listing of all compliance approvals and certifications, please visit www.sitentknight.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Silent Knight°, System Sensor' and Honeywell' are registered trademarks of Honeywell International, Inc. This document is not intended to be used for installation purposes. We tryto keep our product information up -to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, call 800-446-6444. Honeywell SILENT' KNIGHT mW SERIES Addressable Photoelectric Smoke Detectors The Silent Knight"' SK-PHOTO-W Series feature a modern design and expanded color options support a variety of contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency. The SK-PHOTO-W Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the SK-PHOTO Series detectors. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The SK-PHOTO-W Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector's address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (5710 fixed temperature thermal sensing on the SK-PHOTO-T-W. The SK-PHOTO-R-W is a remote test capable detector for use with DN R Series duct detector housings. FEATURES AND BENEFITS • Designed to meet UL 1268 7th Edition • Sleek and stylish contemporary design • Stable communication technique with noise immunity • Addressable by device • Rotary, decimal addressing (Refer to the Silent Knight panel manuals for device capacity) • Two -wire SLC connection • LEDs blink everytime the unit is polled • 3601-field viewing angle of the visual alarm indicators (two bi-color LEDs); LEDs blink green in Normal condition and turn on steady red in Alarm • Integral communications and built-in device -type identification • Remote test feature from the panel • Built-in functional test switch activated by external magnet • Walk testwith address display (an address of 121 will blink the detector LED 12- (pause)-1) • Low standby current • Built-in tamper -resistant feature • Designed for direct -surface or electrical - box mounting • Sealed against back pressure • Plugs into separate base for ease of installation and maintenance • Expanded color options • SEMS screws forwiring of the separate base • Optional remote, single -gang LED accessory • Optional sounder, relay, and isolator bases Honeywell SILENT' KNIGHT INSTALLATION The SK-PHOTO-W Series plug-in intelligent thermal detectors use a separate base to simplify installation, service, and maintenance. Installation instructions are shipped with each detector. Mount base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. For a chart of compatible junction boxes, see SK-61045. Note: Because of the inherent supervision provided bytheSLC loop, end -of -line resistors are not required. Wiring 7-taps" or branches are permitted for Style 4 (Class "B") wiring. Note: When using relay or sounder bases, consult the SK-ISO installation sheet 156-3627 for device limitations between isolator modules and isolator bases. OPERATION Each SK-PHOTO-W Series detector uses one of the panel's addresses (total limit is panel dependent) on the Signaling Line Circuit (SLC). It responds to regular polls from the control panel and reports its type and the status. If it receives a test command from the panel (or a local magnet test), it stimulates its electronics and reports an alarm. It blinks its LEDs when polled and turns the LEDs on when commanded by the panel. The SK-PHOTO-W Series offers features and performance that represent the latest in smoke detector technology. PRODUCT LINE INFORMATION Note: "-IV" suffix indicates ivory color. SK-PHOTO-W: White, low -profile photoelectric sensor SK-PHOTO-T-W: White, same as SK-PHOTO-W but includes a built-in 1350F (57°C) fixed -temperature thermal device SK-PHOTO-R-W: White, low -profile intelligent photoelectric sensor, remote test capable, for use with DNR/DNRW B300-6: White, standard flanged low -profile mounting base B300-6-BP: Bulk pack of B300-6, package contains 10 B300-6-IV: Ivory, standard flanged low -profile mounting base B501-WHITE: White, standard European flangeless mounting base B501-BL: Black, standard European flangeless mounting base B501-IV: Ivory, standard European flangeless mounting base B501-WHITE-BP: Bulk pack of 3501-WHITE, contains 10 B20OS-WH: White, Intelligent, programmable sounder base B20OS-IV: Ivory, Intelligent, programmable sounder base B200SR-WH: White, Intelligent sounder base for retrofit applications B200SR-IV: Ivory, Intelligent sounder base for retrofit applications B20OS-LF-WH: White, Low Frequency Intelligent, programmable sounderbase B20OS-LF-IV: Ivory, Low Frequency Intelligent, programmable sounderbase B200SR-LF-WH: White, Low Frequency Intelligent sounder base for retrofit applications B200SR-LF-IV: Ivory, Low Frequency Intelligent sounder base for retrofit applications B224RB-WH: White, plug-in System Sensor' relay base B224RB-IV: Ivory, plug-in System Sensor relay base B224BI-WH: White, plug-in System Sensor isolator detector base B224BI-IV: Ivory, plug-in System Sensor isolator detector base ACCESSORIES TR300: White, replacement flange for B21OLP or B300-6 bases TR300-IV: Ivory, replacement flange for B21OLP or B300-6 bases RA100Z(A): Remote 3 - 32 VDC LED annunciator, mounts to a U.S. single -gang electrical box, for use with B501 and B300-6 bases only M02-04-00: Test magnet M02-09-00: Test magnet with telescoping handle CK300: White, detector color kit, pack of 10 CK300-IV: Ivory, detector color kit, pack of 10 CK300-BL: Black, detector color kit, pack of 10 Page 2 of 3 — 351634:13 • 7/1/2019 SK-PHOTO-W SERIES TECHNICAL SPECIFICATIONS PHYSICAL/ENVIRONMENTAL Sensitivity: - UL Applications: 0.5% to 4.0% per foot obscuration. - ULC Applications: 0.5%to 3.5% per foot obscuration Size: 2.0" (5.3 cm) high; base determines diameter - B300-6: 6.1" (15.6 cm) diameter - B501: 4" (10.2 cm) diameter For a complete list of detector bases, see SK-61045. Shipping weight: 3.4 oz. (95 g) Operating temperature range: • SK-PHOTO-W:32°Ftol22°F(0°Cto50°C) • SK-PHOTO-T-W: 32°F to 100°F(0°C to 38°C) • SK-PHOTO-R-W installed in a DNR/DNRW: -4°F to 158°F (-20°C to 70°C) UL/ULC Listed Velocity Range: 0-4000 ft/ min. (1219.2 m/min.), suitable for installation in ducts Relative humidity: 10%— 93% non - condensing Thermal ratings: fixed -temperature set point 1350F (57C), rate -of -rise detection 15°F (8.3°C) per minute, high temperature heat 190OF(88°C) ELECTRICAL SPECIFICATIONS Voltage range:15 - 32 volts DC peak Standby current (max. avg.): 200pA @ 24 VDC (one communication every 5 seconds with LED enabled) Max current: 4.5 mA @ 24 VDC ("ON") Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.sitentknight.com DETECTOR SPACING AND APPLICATIONS Silent Knight recommends spacing detectors in compliance with NFPA 72. In low airflow applications with smooth ceiling, space detectors 30 feet (9.1m). For specific information regarding detector spacing, placement, and special applications referto N FPA 72. A System Smoke Detector Application Guide, documentA05-1003, is available at www.systemsensor.com. AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document.ln some cases, certain modules or applications may not be listed bycertain approval agencies, or listing may be in process. Consult factory for latest listing status. • ULListed:S6173 • FM Approved • CSFM:7272-0559:0512 351634 1 B 1 07/19 ©2019 Honeywell International Inc. Honeywell SILENT' KNIGHT '-DS6 6 Amp and 10 Amp, 24 Volt Power Supplies The PS Series are independently configurable power supplies, allowing you to pair any input with any output, and feature LED diagnostics for troubleshooting. The PS Series is a remote power supply line from Silent Knight and is a direct replacement for the 5495/5499. The SK-PS6 is a 6 amp and the SK-PS10 is a 10 amp, remote power supply with battery charger that maybe connected to any 12 or 24 volt fire alarm control panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power for NACs (notification appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet. FEATURES AND BENEFITS • Up to five (6 amp model) or seven (10 amp model) independently -configurable, power - limited output circuits for: —Class B and/or Class A NACs —Class B and/or Class A resettable or non- resettable 24V auxiliary power —door holder power • Converts from Class B to Class A wiring without losing any outputs using the ZNAC- PS converter card (sold separately) • Optimal for powering four -wire smoke detectors, annunciators, and other system peripherals requiring regulated power • Optional addressable control, monitor, and relay modules and power -supervision relay (EOLR-1) • Configurable for ANSI° Temporal 3 or Temporal coded output • UL-Listed NAC synchronization using System Sensor®, Wheelock', Gentex°, or AMSECO° appliances • Synchronization can be triggered from FACP NAC/remote sync outputs, cascaded power supply, or a control module, single or multi, which may be housed within the power supply cabinet • Ability to cascade up to four power supplies • Two (6 amp model) orthree (10 amp model) fully -isolated input/control circuits which can be programmed to any output • Two Form C normally -closed trouble relays for AC Trouble and General Trouble • 6 or 10 amp full load output, respectively, with 3 A maximum/circuit • Individual NAC power and trouble LEDs for diagnostic efficiency • Trouble history mode for diagnostic support • Wide range end -of -line supervision value (normal: 2-27K ohms) • Selectable earth fault detection (enable or disable) • AC trouble report delay timer • Completely configurable via onboard DIP switches, no extra software required • Self-contained in compact, locking cabinet constructed of heavy gauge steel with a 0 A corrosion -resistant powder coat chip and scratch -resistant finish • Cabinet designed with ten double knockouts and a removable door for ease of installation and wiring • Includes integral battery charger capable of charging up to 33 AH batteries • Cabinet can house two 7 AH or 18 AH batteries • Battery charger may be disabled via DIP switch for applications requiring larger batteries and external battery charger • Removable terminal blocks accommodate up to 12 AWG (3.1mm2) wire • Works with any UL 864 FACP which utilizes an industry -standard reverse -polarity notification circuit Honeywell SILENT' KNIGHT ORDERING INFORMATION SK-PS6: 6.0 A,120 VAC remote charger power supply in a lockable, metal enclosure, red SK-PS10:10.0 A,120 VAC remote charger power supply in a lockable, metal enclosure, red ZNAC-PS: Optional Class A converter card, sold separately SK-CONTROL: Addressable Control Module for one Class B or Class A zone of supervised, polarized Notification Appliances. Notification Appliance Circuit option requires external24 VDC to power notification appliances. SK-RELAY: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch SK-MONITOR: Addressable Monitor Module for one zone of normally open dry -contact initiating devices. Includes plastic cover plate and end -of -line resistor. Module may be configured for either a Class B or Class A SK-MONITOR-2: Dual Monitor Module. Same as SK-MONITOR except it provides two inputs for Class B wiring only SK-RELAYMON-2: Provides two monitored inputs and two Form-C relays. Functions in Class B wiring only SK-CONTROL-6: Six -circuit supervised control module SK-RELAY-6: Six Form-C relay control module EOLR-1:12/24 VDC end -of -line relay for monitoring four -wire smoke detector power BAT-1270-BP: Battery,12 volt, 7.0 AH, 5-pack (two required) BAT-12180-BP: Battery,12 volt,18AH, 2-pack BAT-12330: Battery,12 volt, 33AH SEISKIT-MULTI-1: Seismic kit for the PS Series. Includes bracket and hardware for two 7AH or two 18AH batteries. Page 2 of 3 — SK-61095:C • 3/10/2021 SK-PS6 / SK-PS10 TECHNICAL SPECIFICATIONS PRIMARY (AC) POWER SK-PS6:120 VAC, 50/60 Hz, 5.OA maximum SK-PS10:120VAC, 50/60 Hz, 6.2 A maximum Wire Size: #12-14 AWG with 600 V insulation COMMAND INPUT CIRCUIT Trigger Input Voltage: 9 to 32 VDC Trigger Current: 2.0 mA (16 - 32 V); Per Input:1.0 mA (9 -16 V) RELAY CIRCUITS Trouble Contact Rating: 4 A at 24 VDC OUTPUT CIRCUITS • 24 VDC filtered • SK-PS6: T138-TI39 — lA Regulated, 3A special applications; TB10-TB12 — 0.3A Regulated, 3A special applications • SK-PS10: T138-TB11-1.5A Regulated, 3A special applications; TB12-TB14 — 0.3A Regulated, 3A special applications • 6.0A (SK-PS6) or 10.0 (SK-PS10) maximum total continuous current for all outputs Honeywell Silent Knight 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.sitentknight.com SECONDARY POWER (BATTERY) CHARGING CIRCUIT • Supports lead -acid batteries only • Float -charge voltage: 27.6 VDC • Maximum current charge:1.5 A • Maximum battery capacity: 18 AH (inside cabinet) • Maximum battery charging capacity: 33 AH (external cabinet) PHYSICAL Dimensions: 20.0"H x 14.5°W x 3.5"D (cm: 50.8H x 36.83W x 8.9D) Weight: with two 7Ah batteries is 24 pounds (10.9 kg), with two 18 AH batteries is 39 pounds (17.7 kg) STANDARDS AND CODES The SK-PS complies with the following standards: NFPA 72: National Fire Alarm Code UL 864: Standard for Control Units for Fire Alarm Systems (NAC expander mode) UL 1481: Power Supplies for Fire Alarm Systems AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL Listed: S3511 CSFM: 7315-0559:0522 FDNY Approved FM Approved SK-61095 I C 1 03/21 ©2021 Honeywell International Inc. Honeywell SILENT' KNIGHT Honeywell ®SILENT' I acir SK-PULL-SA / SK-PULL-DA Intelligent Pull Stations I The SK-PULL-SA is a single action pull station requiring only one motion to activate the station. The SK-PULL-DA is a dual action pull station requiring two motions to active the station. The SK-PULL-SA and SK-PULL-DA are for use with Honeywell Silent Knight Series fire control panel (FACP). Extremely easy to operate, the SK-PULL-DA and SK-PULL-SA provide a fast and practical means of manually initiating e alarm signal. The FACP recognizes each manual pull station by its ific address saving precious seconds in determining the location of an a INSTALLATION The SK-PULL-SA and SK-PULL-DA can be surface mounted to an SB-1/0 surface back box or semi -flush mounted on a standard single -gang with a minimum depth of 2.13"(5.40 cm) or double gang or 4" (10.61 cm) square electrical box. You can also use the optional (System Sensor' PN BG-TR) trim ring if the station is being semi -flush mounted. 1k FEATURES & BENEFITS • Installer can open station without causing an alarm condition • Dual -color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition • Key operated test and reset lock using lock plate actuator • Key matches compatible FACP locks • Meets ADA requirement for 5 lbs maximum pull force to active Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3[13]) • Shell, door, and handle molded from durable LEXAN° SK-PULL-SA SK-PULL-DA • Reliable analog communications for trouble -free operation • Braille text on station handle • Rotary address switches for fast installation • Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled • UL Listed, including UL 38, Standard of Manually Actuated Signaling System • CSFM Listed • MEA Listed SK-PULL-SA / SK-PULL-DA Technical Specifications For a complete listing of all compliance approvals and certifications, please visit PHYSICAL ORDERING INFORMATION www.sitentknight.com. Dimensions: 5.5" H x4" W x 1.45" D (14 x 10.2 x SK-Pull-SA: Single Action Pull Station 3.7cm) SK-Pull-DA: Dual Action Pull Station and e the Windows Logo are theWi down Logo HousingMaterial: LEXAN of carbonate resin P Y registered trademarks Bi-Colored LED: ACCESSORIES or trademarks of Blinking Green: Normal BG-TR: Optional trim ring. Microsoft Corporation. Steady Red: Alarm SB-1/0: Surface backbox, indoor/outdoor. Silent Knight®, System Switch: Single pole, single throw (SPST) normally * Unless otherwise noted, specifications apply to Sensor' and Honeywell' open (N/O) switch which closes upon activation of SK-Pull-SA and SK-Pull-DA are registered the pull station trademarks of Honeywell COMPATIBILITY International, Inc. ELECTRICAL The SK-PULL-SA AND SK-PULL-DA are This document is not Operating Voltage: 15 — 32VDC compatible with the following Honeywell Silent intended to be used for SLC Standby and Alarm Current: 350µA Knight fire alarm control panels: installation purposes. We Wire Gauge: Up to 12AWG (3.1 mmz) 6820: Addressable fire alarm control panel tryto keep our productinformation up -to 6820EVS: Addressable fire alarm control panel date and accurate. We ENVIRONMENTAL with an emergency voice system. cannot cover all specific Operating Temperature: 320F — 120°F (0°C — 6808: Addressable fire alarm control panel applications or anticipate 49°C) 6700: Addressable fire alarm control panel all requirements. All specifications are subject Humidity: 10% — 93% non -condensing 5700: Addressable fire alarm control panel to change without notice. 5808: Addressable fire alarm control panel 5820XL: Addressable fire alarm control panel caIt 80 -446 6444. call 800-446-6444. 5820XL-EVS: Addressable fire alarm control panel with an emergency voice system For more information Learn more about Honeywell Silent Knight and other products by visiting www.sitentknight.com Honeywell Silent Knight 12 Clintonville Road Honeywell Northford, CT 06472 Doc 350135 1 Rev E 1 11/17 SILENT 13 800-328-0103 © 2017 Honeywell International Inc. EMGHT Battery Specification Sheet Technical Specifications Nominal Voltaae 12 V Nominal Capacity 8.0 Ah (20 Hr Rate) Chemistry Lead Acid - AGM Physical Specifications Length: 151 mm 5.94 in. Width: 65 mm 2.56 in. SLA1075 T I15+1 1 o.+,lra.rx+ 334 INA Height: 93.8 mm 3.69 in. Height w/ Terminal: 98.4 mm 3.88 in. Weight 2.51 kg 5.53 lbs. Terminal Type .187" Faston Case Material Black ABS Charging Specifications Max. Charge Current 2.16 A Approx Final Charge 0.014 A Current (2.25 volts/cell Float) Approx Final Charge 0.07 A Current (2.45 volts/cell Cycle) Capacity Specifications Cut-off Voltage 20 Hr Rate (AA) 7.5 Ah 1.75 volts/cell @ 250C 10 Hr Rate (.69A) 6.98 Ah 1.70 volts/cell @ 250C 5 Hr Rate (1.27A) 6.37 Ah 1.55 volts/cell @ 25°C 1 Hr Rate (4.5A) 4.5 Ah Bloc Per Cell Charge Voltage Floa113.5-13.8 2.25-2.30 (constant) Cycl(14.4-14.7 2.40-2.45 Discharge Current 80 A (5 seconds maximum) Discharge Current 50 A (maximum continuous) Self Discharge 9 months @ 21 cC (to 80% capacity) Internal Resistance 25 mS2 Due to changes in the manufacturing processes, specifications are subject to change without notice BAZR2. M H 18830 interstatebatteries. com I sae 1 z © ¢ ava 1; ff,$ `I I 17fiwrrrr�n� nrry•F o.� 0 Interstate Battery System of America, Inc. 0810 Batteries Battery Specification Sheet eA 22 sanely dbisd%w& chauactsistcs 0 ! 2 a * *10 20 Ao" 7 4P 6 t5d Aa AD • rx !jN --III IL'ak t5r �' w v,llla ia�np ]YD y.4 r.a Llmnl 7iA ti •L•uTllw•- SLA1075 ■■■ �11111■■■ 111111■■■ � ' ��■��#1111��■��IIIII��■■ ■■_�_ ��i��ll■_■_■l11111■_■_■_ �_ ��■ ■■Illl�lr$33� ■■1111��■ ■ ��■■■■■11�■t1F1■■ M■■ r■■111111 �� II ■■� MEN 111111■■■1111ia1■■1 W IiYii�ia� i • I I ._ D.WW-QINzOWClMMv4aiptc1:&3th" vM* } L. 11I I L..4•�i. nlllai —R• [[II y 'I IYr•Iln i + I�I 1 I i 5 T i i ]Y ib dG i CAUTION: Do not charge in a sealed container. Avoid Short Circuit. Before using this battery in high current applications(>3C), consult with Interstate Batteries. Notes: Leak-proof/spill-proof. Most SLA(Sealed Lead Acid) batteries now use AGM(Absorbent Glass Mat) technology which has largely replaced the old "gel" technology. In an AGM battery, fiberglass mats absorb the acid and hold it against the lead plates inside the battery. Because the acid is absorbed by the sponge -like mats, it will not leak or spill (provided proper charging and usage instructions are followed). Additional safety features include the use of special sealing epoxies, tongue -and -groove case and cover construction as well as long sealing paths for post and connectors. Our AGM batteries are approved for all modes of transport(water, road, rail, air, etc.). interstatebatteries.com 0 Interstate Battery System of America, Inc. o8/1 o 4,�� SYSTEM Outdoor, Selectable - Output Speaker Strobes and Dual - Voltage Evacuation Speakers for Ceiling Applications SpectrAlert° Advance outdoor audible visible products are rich with features that cut installation times and maximize profits. Features • Weatherproof per NEMA 4X, IP56 • Rated from —40°F to 151 °F • Plug-in design reduces ground faults • Universal mounting plate with onboard shorting spring that tests wiring continuity before devices are installed • Field -selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115 135, 150, 177, and 185 • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela • Rotary switch for speaker voltage (25 and 70.7 Vrms) and power settings (1/4, 1/2, 1 and 2 watts) • Compatible with System Sensor synchronization protocol and legacy SpectrAlert products • Tamper -resistant construction • Listed for ceiling or wall mounting Agency Listings SiGxnuxG @= MEA LISTED approved 75SO 7320-1653:201 10-08-E j SPECTRAllert CAo m S s t e rri S e n s o r SpectrAlert Advance offers the broadest line of outdoor speakers and speaker strobes in the industry. From metal and plastic outdoor back boxes, to white and red plastic housings, to wall and ceiling mounting options, SpectrAlert Advance can meet virtually any application requirement. Ceiling -mount outdoor speakers and speaker strobes can be used indoors or outdoors in wet or dry applications, and can provide reliable operation from —40oF to 151 °F. These speakers provide a broad frequency response range, low harmonic distortion and maintain a high sound pressure level at all tap settings to provide accurate and intelligible broadcast of evacuation messages. Like the entire SpectrAlert Advance line, ceiling -mount outdoor speakers and speaker strobes include a variety of features that increase application flexibility and simplify installation. First, field - selectable settings, including candela, speaker voltage and power settings, and automatic selection of 12- or 24-volt operation enable installers to easily adapt devices to meet requirements. Next, these devices use a universal mounting plate with an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults. Outdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in -and - out wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Knock -outs located on the back eliminate the need to drill holes for screw -in mounting. Plastic and metal weatherproof back boxes come with 3/4-inch top and bottom conduit entries and 3/4-inch knock -outs at the back. A screw -in NPT plug with an 0-ring gasket for a watertight seal is included with each back box. SpectrAlert° Advance Outdoor Speaker and Speaker Strobe Specifications General SpectrAlert Advance outdoor speakers and speaker strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance speaker strobes, when used with the Sync•Circuif" Module accessory, shall be powered from a non -coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 9 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 17 and 33 volts. Outdoor SpectrAlert Advance products shall operate between —40oF and 151 °F from a regulated DC, or full -wave rectified, unfiltered power supply. Speaker Speaker shall be a System Sensor SpectrAlert Advance Model dual -voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms. Speaker shall be listed to Underwriters Laboratories Standard S4048 for outdoor fire protective signaling systems. Speaker shall have a frequency range of 400 to 4,000 Hz and shall have an operating temperature from —40°F to 150.8°F Speaker shall have power taps and wattage settings that are selected by rotary switches. The speaker must be installed with its weatherproof back box in order to remain outdoor approved per UL listing S4048. The speaker shall be suitable for use in air handling spaces and wet environments. Speaker Strobe Combination The speaker strobe shall be a System Sensor Model listed to UL 1638 and UL 1480 and be approved for fire protective signaling systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms and shall have a frequency range of 400 to 4,000 Hz. Speaker shall have power taps that are selected by rotary switch. The strobe shall consist of a xenon flash tube with associated lens/reflector system and operate on either 12 or 24 volts. The strobe shall also feature selectable candela output, providing options for 15 or 15/75 candela when operating on 12 volts and 15, 15/75, 30, 75, 110, 115, 135, 150, 177 or 185 candela when operating on 24 volts. The strobe shall comply with the Americans with Disabilities Act requirement for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The speaker strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The speaker strobe shall be suitable for use in wet environments. Operating Temperature —40°F to 151 °F (-40oC to 66°C) Dimensions, Ceiling -Mount SPS Speaker Strobe 6.8-Dia. x 4.7-D (including lens and speaker) SP Speaker 6.8-Dia. x 2.9-D Dimensions, Ceiling -Mount Weatherproof Back Box Electrical/Operating.- 7.2-Dia. x 2.9-D Nominal Voltage (speakers) 25 V or 70.7 V (nominal) Maximum Supervisory Voltage (speakers) 50 VDC Strobe Flash Rate 1 flash per second Nominal Voltage (strobes) Regulated 12 VDC/FWR or regulated 24 DC/FWR Operating Voltage Range (includes fire alarm panels with built in sync) 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage with MDL Sync Module 9 to 17.5 V (12 V nominal) or 17 to 33 V (24 V nominal) Frequency Range 400 to 4,000 Hz Power 1/4, 1/2, 1, 2 watts AVDS00901 UL Current Draw Data Candela Derating UL Max. Strobe Current Draw (rnA RMS) For K series products used at low 8 to 17.5 Volts 16 to 33 Volts temperatures, listed candela ratings must be /�.....1.... r%f` MAIM r f% CIAIM reduced in accordance with this table. Standard 15 123 128 66 71 Candela Range 15/75 142 148 77 81 30 NA NA 94 96 75 NA NA 158 153 95 NA NA 181 176 110 NA NA 202 195 115 NA NA 210 205 High 135 NA NA 228 207 Candela Range 150 NA NA 246 220 177 NA NA 281 251 185 NA NA 286 258 Sound Output UL Reverberant (dBA @ 10 ft.) 2W 1 W 1/2 W 1/4 W Outdoor Speaker 90 87 84 81 Outdoor Speaker/Strobe 89 86 83 80 Dimensions T 7.1 Ceiling -Mount Outdoor Speaker StrobeOutput Listed Candela Candela rating at —40T 15 Do not use below 32°F 15/75 30 75 44 95 70 110 110 115 115 135 135 150 150 177 1177 185 1185 7.19 Ceiling -Mount Outdoor Speaker Strobe AVDS00901 Surface Mountin toy_ o I��J." � � ; • � �e� —�e lily�'.'7 c �` I Ceiling -Mount Speaker Strobe with Plastic Weatherproof Back Box Ceiling -Mount Speaker with Plastic Weatherproof Back Box Ceiling -Mount Speaker Strobe with Metal Weatherproof Back Box Ceiling -Mount Speaker with Metal Weatherproof Back Box Ordering Information for SpectrAlere Advance Outdoor Speakers and Speaker Strobes White Red Description SPCWK — Outdoor Speaker (includes plastic weatherproof back box) SPSCWK — Outdoor Speaker Strobe, Standard cd, (includes plastic weatherproof back box) SPSCWHK — Outdoor Speaker Strobe, High cd (includes plastic weatherproof back box) SPSCWHK-P — Outdoor Speaker Strobe, High cd, PLAIN; (includes plastic weatherproof back box) SPSCWK-CLR- — Outdoor Speaker Strobe, Selectable Candela, Clear Lens, ALERT Printed; ALERT (includes plastic weatherproof back box) Accessories White Red Description MWBBCW — Ceiling, Metal Weatherproof Back Box Notes: "Standard cd" refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. "High cd" refers to strobes that include 135, 150, 177, and 185 candela settings. When replacing standard outdoor units, both the device and back box must be replaced. f_ SYSTEM ©t to change System Sensor. 3825 Ohio Avenue • St. Charles, IL 60174 Produc specifications subject02SysmSentnotice. Visit systemsensoccom SENSOR Phone: 800-SENSOR2 • Fax: 630-377-6495 or current productinformatiAV,includingthelatestversion ofthisdata sheet. AVID .0 /12 ate 4,�� SYSTEM Indoor Selectable - Output Speaker Strobes and Dual Voltage Evacuation Speakers for Ceiling Applications System Sensor L-Series selectable -output speaker strobes and dual -voltage evacuation speakers can reduce ground faults and enable faster installation with lower current draw and modern aesthetics. Features • Plug-in design and protective cover reduce ground faults • Universal mounting plate with an onboard shorting spring tests wiring continuity before installation • No extension ring required • Field selectable candela settings on ceiling units: 15, 30, 75, 95, 115, 150, and 177 • Automatic selection of 12- or 24-volt operation at 15 and 30 candela • Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4, 1/2, 1 and 2 watts) • Speakers offer high fidelity and high volume sound output • 520 Hz +/- 10% square wave tone capable with compatible FACP • Compatible with System Sensor synchronization protocol • Electrical compatibility with existing SpectrAlert and SpectrAlert Advance products • Tamper -resistant construction • Updated modern aesthetics Agency Listings SIGNALING & F M LISTED APPROVED 54048 FM approved except 7320-1653:0505 for ALERT models 3057493 System Sensor L-Series of speakers and speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre -wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers. In addition, a protective plastic cover prevents nicked wires by covering exposed speaker components. These devices also enable faster installations by providing instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and 7 field -selectable candela settings for both wall and ceiling speaker strobes. The low total harmonic distortion of the SP speaker offers high fidelity sound output while still offering high volume sound output for use in high ambient noise applications. L-Series makes installation easy • Attach a universal mounting plate to a 4 x 4 x 21/8 inch back box . Flush -mount applications do not require an extension ring. • Connect the notification appliance circuit or speaker wiring to the terminals on the mounting plate. • Attach the speaker or speaker strobe to the mounting plate by inserting the product tabs into the mounting plate grooves. Hinge the device into position to lock the product pins into the mounting plate terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw. AVDS866-03. 03/23/2018 • Page 1 L-Series Speaker and Speaker Strobe Specifications General L-Series speaker and speaker strobes shall mount to a 4 x 4 x 21/8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, L-Series speaker strobes, when used with the Sync•CircuitTm Module accessory, shall be powered from a non -coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 320F and 120°F from a regulated DC, or full -wave rectified, unfiltered power supply. Speaker strobes shall have field -selectable candela settings including 15, 30, 75, 95, 115, 150, 177. Speaker The speaker shall be a System Sensor L-Series model dual -voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms. It should be listed to UL 1480 and shall be approved for fire protective service. The speaker shall have a frequency range of 400 to 4,000 Hz and shall have an operating temperature between 32°F and 120°F. The speaker shall have power taps and voltage that are selected by rotary switches. Speaker Strobe combination The speaker strobe shall be a System Sensor L-Series model listed to UL1480 and UL 1971 and be approved for fire protective signaling systems. The speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms selected via rotary switch, and shall have a frequency range of 400 to 4,000 Hz. The speaker shall have power taps that are selected by rotary switch. The strobe shall comply with the NFPA 72 requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Synchronization Module The module shall be a System Sensor Sync•Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAlert strobes at 1 Hz. The module shall mount to a 411/16 x 411/16 x 21/8-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non -condensing Dimensions, Ceiling -Mount Diameter Depth SPC Speaker 6.8 in, 173 mm 1.0 in, 25 mm With Surface Mount Back Box 6.9 in, 176 mm 3.5 in, 89 mm SPSC Speaker Strobe 6.8 in, 173 mm 2.8 in, 73 mm With Surface Mount Back Box 6.9 in, 176 mm 5.37 in, 136 mm "When using 12AWG, 14 AWG, or adding extra wires in the box, a deeper box or extension ring is recommended. Electrical/Operating Nominal Voltage (speakers) 25 Volts or 70.7 Volts (nominal) Maximum Supervisory Voltage (speakers) 50 VDC Strobe Flash Rate 1 flash per second Nominal Voltage (strobes) Regulated 12 VDC or regulated 24 VDC/FWR 1,2 Operating Voltage Range (includes fire alarm panels with built in sync) 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage with MDL3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal) Frequency Range 400 to 4,000 Hz3 Power 1/4, 1/2, 1, 2 watts 1. Full Wave Rectified (FWR) voltage is a non -regulated, time -varying power source that is used on some power supply and panel outputs 2. Strobe products will operate at 12 V nominal only for 15 and 30 cd. 3. 520 Hz +/- 10% square wave tone capable with compatible FACP. AVDS866-03. 03/23/2018 • Page 2 UL Current Draw Data IL Fnax. titrObe.. Candela A1115) 8 to 17.5 Volts DC 16 to 33 Volts DC FWR 15 87 41 60 30 153 63 86 75 NA 111 142 95 NA 134 164 115 NA 158 191 150 NA 189 228 177 NA 226 264 OutputCeiling-Mount Speaker Sound Setting UL Reverberant (dBA @10 ft) UL Anechoic (dBA @10 ft) 1 /4 W 79 79 1/2 W 82 82 1 W 85 85 2 W 88 88 StrobeCeiling-Mount Speaker Output Setting UL Reverberant (dBA @10 ft) UL Anechoic (dBA @10 ft) 1/4 W 77 77 1/2 W 80 80 1 W 83 83 2 W 86 86 L-Series Dimensions 6.8" dia. (173 mm) 6.8" dia. (173 mm) 1.8" (25.4 mm) Ceiling Speaker Ceiling Speaker Strobe A0543-00 A0544-00 AVDS866-03. 03/23/2018 - Page 3 Surface Mountin A0504-01 Ceiling Speaker with Surface Mount Back Box A0520-01 Ceiling Speaker Strobe with Surface Mount Back Box A0542-00 Ceiling Speaker Strobe with Trim Ring and 4" Square Electrical Box L-Series Ordering Information White Red Description SPCWL SPCWL Speaker only SPSCWL SPSCWL Speaker Strobe SPSCWL-P — Plain, Speaker Strobe SPSCWL-SP — Fuego, Speaker Strobe SPSCWL-CLR-ALERT — Alert, Speaker Strobe, Clear Lens White Red Description SBBCWL SBBCRL Universal Ceiling Surface Mount Back Box TRC-2W TRC-2 Universal Ceiling Trim Ring SYSTEM 3825 Ohio Avenue • St. Charles, IL 60174 ©2018System Sensor. 1 Phone: 800-SENSOR2 •Fax: 630-377-6495 Product specifications subject to change without notice. Visit systemsensorcom for current product information, including the latest version of this data sheet. SENSOR ,vJ www.systemsensor.com AVDS866-03 • 03/23/2018 4,�� SYSTEM Selectable Output Horns, Strobes, and Horn/Strobes SpectrAlert®Advance selectable -output horns, strobes, and horn/strobes are rich with features guaranteed to cut installation times and maximize profits. The SpectrAlert Advance series of notification appliances is designed to simplify installations, with features such as plug in designs, instant feedback messages to ensure correct installation of individual devices, and 11 field -selectable candela settings for wall and ceiling strobes and horn/strobes. When installing Advance products, first attach a universal mounting plate to a four -inch square, four -inch octagon or double -gang junction box. The two -wire mounting plate attaches to a single -gang junction box. Next, connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate. Finally, attach the horn, strobe or horn/strobe to the mounting plate by inserting the product's tabs in the mounting plate's grooves. The device will rotate into position, locking the product's pins into the mounting plate's terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw. The SpectrAlert Advance series includes outdoor notification appliances. Outdoor strobes and horn/strobes (two wire and four wire) are available for wall or ceiling. Outdoor horns are available for wall only. All System Sensor outdoor products are rated between minus 40 degrees Fahrenheit and 151 degrees Fahrenheit in wet or dry applications. = f r o m S s t e m S e n s o r Features • Electrically compatible with existing SpectrAlert products Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela • Plug-in design Field selectable candela settings on wall and ceiling units: 15,15/75, 30, 75, 95, 110, 1 15, 135, 150, 177, 185 • Same mounting plate for wall- and ceiling -mount units Shorting spring on mounting plate for continuity check before installation -Tamper resistant construction Outdoor wall and ceiling products rated from —40°F to 151 °F • Design allows minimal intrusion into the back box Horn rated at 88+ dbA at 16 volts • Rotary switch for horn tone and three volume selections Outdoor products UL listed to UL 1638 (strobe) and UL 464 (horn) outdoor requirements • Outdoor products rainproof per UL 50 (NEMA 3R) • Compatible with MDL sync module Aaencv Listinas SIGNALING UL F M MEA b 7125-1653:186 (indoor strobes) 7300-1653:187(outdoor strobes) sO; 7125-1653:188 (horn/strobes, LISTED APPROVED approved chime/strobes) 7135-1653:189(horns, chimes) S4011 ... :;;2 MEA452-05-E S5512 S3593 SpectrAlert Advance Specifications General SpectrAlert Advance horns, strobes and horn/strobes shall mount to a standard 4 x 4 x 11h-inch back box, 4-inch octagon back box or double -gang back box. Two -wire products shall also mount to a single -gang 2 x 4 x 1 7/8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit' Module accessory, shall be powered from a non -coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync -Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between nine and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC, or full -wave rectified, unfiltered power supply. Strobes and horn/strobes shall have field -selectable candela settings including 15,15/75, 30, 75, 95,110, 115,135,150,177, 185. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and shall be approved for fire protective service.The strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Horn/Strobe Combination The horn/strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn/strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range.The strobe light shall consist of a xenon flash tube and associated lens/reflector system.The horn shall have three audibility options and an option to switch between a temporal three -pattern and a non -temporal (continuous) pattern.These options are set by a multiple position switch. On four -wire products, the strobe shall be powered independently of the sounder.The horn on horn/strobe models shall operate on a coded or non -coded power supply. Outdoor Products SpectrAlert Advance outdoor horns, strobes and horn/strobes shall be listed for outdoor use by UL and shall operate between minus 40 degrees and 151 degrees Fahrenheit. The products shall be listed for use with a System Sensor outdoor/weatherproof back box with half inch and three -fourths inch conduit entries. Synchronization Module The module shall be a System Sensor Sync -Circuit model MDL listed to UL 464 and shall be approved for fire protective service.The module shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns on horn/strobe models over a single pair of wires. The module shall mount to a 41Y16 x 41Y16 x 21/8-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit.The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control.The module shall not operate on a coded power supply. Standard Operating Temperature 32°F to 120oF (0°C to 49°C) K Series Operating Temperature —40°F to 151 °F (-40°C to 66°C) Humidity Range 10 to 93% non -condensing (indoor products) Strobe Flash Rate 1 flash per second Nominal Voltage Regulated 12DC/FWR or regulated 24DC/FWR' Operating Voltage Range' 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal) Input terminal wire gauge 12 to 18 AWG Ceiling mount dimensions (including lens) 6.8"diameter x 2.5-high (173 mm diameter x 64 mm high) Wall mount dimensions (including lens) 5.61 x 4.7V x 2.5-D (142 mm L x 119 mm W x 64 mm D) Horn dimensions 5.61 x 47V x 1.3-D (142 mm L x 119 mm W x 33 mm D) Wall -mount back box skirt dimensions (BBS-2, BBSW-2) 5.91 x 5.0'W x 2.2-D (151 mm L x 128 mm W x 56 mm D) Ceiling -mount back box skirt dimensions (BBSC-2, BBSCW-2) 7.1 "diameter x 2.25" high (180 mm diameter x 57 mm high) Wall -mount weatherproof back box dimensions (SA-WBB) 5.71 x 5.1'W x 2.0-D (145 mm L x 130 mm W x 51 mm D) Ceiling -mount weatherproof back box dimensions (SA-WBBC) 7.1-diameter x 2.0-high (180 mm diameter x 51 mm high) Notes: 1. Full Wave Rectified (FWR) voltage is a non -regulated, time varying power source that is used on some power supply and panel outputs 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd. A05-0395-003 UL Current Draw Data RlJlIkIAFTW'Irn- = Ell lIkIjFrA;r-N-.XWM•J 8-17.5 Volts 16-33 Volts 8-17.5 Volts 16-33 Volts Candela DC FWR DC FWR Sound Pattern dB DC FWR DC FWR Standard 15* 123 128 66 71 Temporal High 57 55 69 75 Candela Range 15/75* 142 148 77 81 Temporal Medium 44 49 58 69 30* NA NA 94 96 Temporal Low 38 44 44 48 75* NA NA 158 153 Non -temporal High 57 56 69 75 95* NA NA 181 176 Non -temporal Medium 42 50 60 69 110 NA NA 202 195 Non -temporal Low 41 44 50 50 115 NA NA 210 205 Coded High 57 55 69 75 High 135 NA NA 228 207 Coded Medium 44 51 56 69 Candela Range 150 NA NA 246 220 Coded Low 40 46 52 50 177 NA NA 281 251 185 NA NA 286 258 UL Max. Current Draw (mA RMS), 2-wire Horn/Strobe, Standard Candela Range (15-115 cd) 8-17.5 Volts 16-33 Volts DC Input 15 15/75 15 15/75 30 75 95 110 115 Temporal High 137 147 79 90 107 176 194 212 218 Temporal Medium 132 144 69 80 97 157 182 201 210 Temporal Low 132 143 66 77 93 154 179 198 207 Non -temporal High 141 152 91 100 116 176 201 221 229 Non -temporal Medium 133 145 75 85 102 163 187 207 216 Non -temporal Low 131 144 68 79 96 156 182 201 210 FWR Input Temporal High 136 155 88 97 112 168 190 210 218 Temporal Medium 129 152 78 88 103 160 184 202 206 Temporal Low 129 151 76 86 101 160 184 194 201 Non -temporal High 142 161 103 112 126 181 203 221 229 Non -temporal Medium 134 155 85 95 110 166 189 208 216 Non -temporal Low 132 154 80 90 105 161 184 202 211 UL Max. Current Draw (mA RMS), 2-wire Horn/Strobe, High Candela Range (1135-185 cd) 16-33 Volts 16-33 Volts DC Input 135 150 177 185 FWR Input 135 150 177 185 Temporal High 245 259 290 297 Temporal High 215 231 258 265 Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258 Temporal Low 232 251 282 292 Temporal Low 207 221 248 256 Non -temporal High 255 270 303 309 Non -temporal High 233 248 275 281 Non -temporal Medium 242 259 293 299 Non -temporal Medium 219 232 262 267 Non -temporal Low 238 254 291 295 Non -temporal Low 214 229 256 262 Candela Derating Horn Tones and Sound Output Data For K series products used at low temperatures, listed candela Horn and Horn/Strobe Output (dBA) ratings must be reduced in accordance with this table. 24 Volt Nominal Strobe Output (cd) Listed Candela Candela rating at-40°F 15 Do not use below 3ZF 15/75 30 75 44 95 70 110 110 115 115 135 135 150 150 177 177 185 185 Switch Position Sound Pattern dB 8-17.5 Volts DC FWR 16-33 Volts DC FWR Reverberant DC FWR Anechoic DC FWR 1 Temporal High 78 78 84 84 88 88 99 98 2 Temporal Medium 74 74 80 80 86 86 96 96 3 Temporal Low 71 73 76 76 83 80 94 89 4 Non -temporal High 82 82 88 88 93 92 100 100 5 Non -temporal Medium 78 78 85 85 90 90 98 98 6 Non -temporal Low 75 75 81 81 88 84 96 92 7t Coded High 82 82 88 88 93 92 101 101 8t Coded Medium 78 78 85 85 90 90 97 98 9t Coded Low 75 75 81 81 88 85 96 92 tSettings 7, 8, and 9 are not available on 2-wire horn/strobe. A05-0395-003 SDectrAlert Advance Dimensions Wall -mount horn/strobes Ceiling -mount horn/strobes 2.25" 7.1" 5.05" 2.231 Di a. 2.0" Dia. I� Dia. 2.0 00. o Q -7 O 1 01 5.98" _Q 5.7" 0 ¢ Y o 0 0 o o o o®"®o � Wall back box skirt Ceiling back box skirt Wall weatherproof back box Ceiling weatherproof back box SpectrAlert Advance Ordering Information Wall Horn/Strobes Ceiling Horn/Strobes (contd.) P2R*t 2-wire Horn/Strobe, Standard cdt, Red PC2W*t 2-wire Horn/Strobe, Standard cd, White P2RH* 2-wire Horn/Strobe, High cd, Red PC2WH*t 2-wire Horn/Strobe, High cd, White P2RK* 2-wire Horn/Strobe, Standard cd, Red, Outdoor PC4R 4-wire Horn/Strobe, Standard cd, Red P2RHK* 2-wire Horn/Strobe, High cd, Red, Outdoor PC4RH 4-wire Horn/Strobe, High cd, Red P2W* 2-wire Horn/Strobe, Standard cd, White PC4RK 4-wire Horn/Strobe, Standard cd, Red, Outdoor P2WH* 2-wire Horn/Strobe, High cd, White PC4RHK 4-wire Horn/Strobe, High cd, Red, Outdoor P4R* 4-wire Horn/Strobe, Standard cd, Red PC4W 4-wire Horn/Strobe, Standard cd, White P4RH* 4-wire Horn/Strobe, High cd, Red PC4WH 4-wire Horn/Strobe, High cd, White P4RK 4-wire Horn/Strobe, Standard cd, Red, Outdoor Ceiling Strobes P4RHK 4-wire Horn/Strobe, High cd, Red, Outdoor SCR* Strobe, Standard cd, Red P4W* 4-wire Horn/Strobe, Standard cd, White SCRH* Strobe, High cd, Red P4WH* 4-wire Horn/Strobe, High cd, White SCRK Strobe, Standard cd, Red, Outdoor Wall Strobes SCRHK Strobe, High cd, Red, Outdoor SR*t Strobe, Standard cd, Red SCW*t Strobe, Standard cd, White SRH*t Strobe, High cd, Red SCWH*t Strobe, High cd, White SRK Strobe, Standard cd, Red, Outdoor Horns SRHK Strobe, High cd, Red, Outdoor HR Horn, Red SW* Strobe, Standard cd, White HRK Horn, Red, Outdoor SWH* Strobe, High cd, White HW Horn, White Ceiling Horn/Strobes Accessories PC2R* 2-wire Horn/Strobe, Standard cd, Red BBS-2 Back Box Skirt, Wall, Red PC2RH* 2-wire Horn/Strobe, High cd, Red BBSW-2 Back Box Skirt, Wall, White PC2RK 2-wire Horn/Strobe, Standard cd, Red, Outdoor BBSC-2 Back Box Skirt, Ceiling, Red PC2RHK 2-wire Horn/Strobe, High cd, Red, Outdoor BBSCW-2 Back Box Skirt, Ceiling, White Notes: * Add "-P"to model number for plain housing (no"FIRE" marking on cover), e.g., P2R-P t Add "-SP"to model number for"FUEGO" marking on cover, e.g., P2R-SP t "Standard cd"refers to strobes that include 15, 15/75, 30, 75, 95,110, and 115 candela settings."High cd°refers to strobes that include 135, 150,177, and 185 candela settings. All outdoor units ending in "K"include a weatherproof back box. SYSTEM m2changewit out or. 3825 Ohio Avenue • St. Charles, IL 60174 Product specifications subject to change without notice. Visit rystemsensoccom for SENSOR- Phone:800-SENSOR2 • Fax:630-377-6495 urrentproductinform05-03 5-003-12/06testversionokhisdatashee. A06-0395-003.12/06•#1676 4,�� SYSTEM Indoor Selectable - Output Speaker Strobes and Dual Voltage Evacuation Speakers for Wall Applications System Sensor L-Series selectable output speaker strobes and dual -voltage evacuation speakers can reduce ground faults and enable faster installation with lower current draw and modern aesthetics. Features • Plug-in design and protective cover reduce ground faults • Universal mounting plate with an onboard shorting spring tests wiring continuity before installation • No extension ring required • Field selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, 185 • Automatic selection of 12- or 24-volt operation at 15 and 30 candela • Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4, 1/2, 1 and 2 watts) • Speakers offer high fidelity and high volume sound output • 520 Hz +/- 10% square wave tone capable with compatible FACP • Compatible with System Sensor synchronization protocol • Electrical compatibility with existing SpectrAlert and SpectrAlert Advance products • Tamper -resistant construction • Updated modern aesthetics Agency Listings SIGNALING & F M LISTED APPROVED 54048 FM approved except 7320-1653:0505 for ALERT models 3057493 loll I�i�IFl�l�l�lrl�l�r Ala.1 I � 6W The System Sensor L-Series of speakers and speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre -wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers. In addition, a protective plastic cover prevents nicked wires by covering exposed speaker components. These devices also enable faster installations by providing instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and 7 field -selectable candela settings for wall speaker strobes. The low total harmonic distortion of the speaker offers high fidelity sound output while still offering high volume sound output for use in high ambient noise applications. System Sensor L-Series makes installation easy • Attach a universal mounting plate to a 4 x 4 x 21/8 inch back box. Flush -mount applications do not require an extension ring. • Connect the notification appliance circuit or speaker wiring to the terminals on the mounting plate. • Attach the speaker or speaker strobe to the mounting plate by inserting the product tabs into the mounting plate grooves. Hinge the device into position to lock the product pins into the mounting plate terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw. AVDS867-03. 6/6/2019 • Page 1 L-Series Speaker and Speaker Strobe Specifications General L-Series speaker and speaker strobes shall mount to a 4 x 4 x 21/8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, L-Series speaker strobes, when used with the Sync•CircuitTm Module accessory, shall be powered from a non -coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 320F and 120°F from a regulated DC, or full -wave rectified, unfiltered power supply. Wall - mount speaker strobes shall have field -selectable candela settings including 15, 30, 75, 95, 110, 135, 185. Speaker The speaker shall be aSp System Sensor L-Series model dual -voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms. It should be listed to UL 1480 and shall be approved for fire protective service. The speaker shall have a frequency range of 400 to 4,000 Hz and shall have an operating temperature between 32°F and 120°F The speaker shall have power taps and voltage that are selected by rotary switches. Speaker Strobe combination The speaker strobe shall be a System Sensor L-Series model listed to UL1480 and UL 1971 and be approved for fire protective signaling systems. The speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms selected via rotary switch, and shall have a frequency range of 400 to 4,000 Hz. The speaker shall have power taps that are selected by rotary switch. The strobe shall comply with the NFPA 72 requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Synchronization Module The module shall be a System Sensor Sync•Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize strobes at 1 Hz. The module shall mount to a 411/16 x 411/16 x 21/6-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non -condensing Dimensions, Wall -Mount Length Width Depth SPL Speaker 6.5 in, 165 mm 5 in, 127 mm 0.97 in,23 mm With Surface Mount Back Box 6.6 in, 168 mm 5.1 in, 130 mm 3.2 in, 82 mm SPSL Speaker/Strobe (including lens and speaker) 6.5 in, 165 mm 5.0 in, 127 mm 2.3 in, 58 mm With Surface Mount Back Box 6.6 in, 168 mm 5.1 in, 130 mm 4.5 in, 116 mm `When using 12AWG, 14 AWG, or adding extra wires in the box, a deeper box or extension ring is recommended. Electrical/Operating Nominal Voltage (speakers) 25 Volts or 70.7 Volts (nominal) Maximum Supervisory Voltage (speakers) 50 VDC Strobe Flash Rate 1 flash per second Nominal Voltage (strobes) Regulated 12 VDC or regulated 24 DC/FWR12 Operating Voltage Range (includes fire alarm panels with built in sync) 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage with MDL3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal) Frequency Range 400 to 4000 Hz3 Power 1/4, 1/2, 1, 2 watts 1. Full Wave Rectified (FWR) voltage is a non -regulated, time -varying power source that is used on some power supply and panel outputs 2. Strobe products will operate at 12 V nominal only for 15 and 30 cd 3. 520 Hz +/- 10% square wave tone capable with compatible FACP. AVDS867-03. 6/6/2019 • Page 2 UL Current Draw Data IL max 5tr0be.. Candela A1115) 8 to 17.5 Volts DC 16 to 33 Volts DC FWR 15 88 43 60 30 143 63 83 75 N/A 107 136 95 N/A 121 155 110 N/A 148 179 135 N/A 172 209 185 N/A 222 257 Sound Output Speaker Strobe 1/4 W 1/2 W 1 W 2 W UL Reverberant (dBA @10 ft) 77 80 83 86 UL Anechoic (dBA @10 ft) 77 80 83 86 Sound Output Speaker 1/4W 1/2W 1W 2W UL Reverberant (dBA @10 ft) 79 82 85 88 UL Anechoic (dBA @10 ft) 79 82 85 88 L-Series Dimensions 6.5" (165 mm) 0.97" 1.63" (24.64 mm) (41.66 mm) A0555-01 Wall -Mount Speaker I 2.3" (56 mm 1.39" (35.31 m Wall -Mount Speaker Strobe 1.63" (41.66 mm) A0556-01 AVDS867-03. 6/6/2019 • Page 3 Surface Mountin A0523-01 Wall -Mount Speaker Strobe with SBBSPRU SBBSPWL Surface Mount Back Box L-Series Ordering Information White Red Description SPWL SPRL Speaker only SPSWL SPSRL Speaker Strobe SPSWL-P SPSRL-P Plain Speaker Strobe SPSWL-ALERT — Speaker Strobe, Amber Lens SPSWL-CLR-ALERT — Speaker Strobe Clear Lens — SPSRL-SP Speaker Strobe, Fuego Accessories White Red Description RFPW RFP 7 in x 9.5 in Retrofit Plate SBBSPWL SBBSPRL Surface Mount Back Box for Speakers and Speaker Strobes TR-2W TR-2 Wall Mount Trim Ring Notes: All -P models have a plain housing (no "FIRE" marking on the cover) SYSTEM SENSOR` 3825 Ohio Avenue • St. Charles, IL 60174 ©2019System Sensor. Phone: 800 SENSOR2 •Fax: 630 377-6495 Product specifications subject to change without notice. Visit systemsensorcom or current product information, including the latest version of this data sheet. www.systemsensor.com AVDS867-03 • 6i6i2019 SIGNALING UL LISTED .*-Business card slots -*-Velcro strap �— Tab for hanging keys or USB drives Standard Features: • Dimensions: 37" tall x 5 '/2 x 4 '/4 deep • Durable 18 gauge steel construction • Continuous stainless steel hinge • Color red, powder coat texture finish • 1" white indelible lettering • Standard key lock to secure documents • Hold a 4" dia 36" long roll of drawings I Air 61 ! L., B ACE-12 DRAWING STORAGE BOX The DSB (Drawing Storage Box) is an ideal solution to safely secure your critical building emergency plans such as evacuation and building layout drawings. In the event of an emergency, you are assured that responders will have immediate access to the proper drawings and information required. A critical and responsible component to any EOP (Emergency Operation Plan). The DSB (Drawing Storage Box) is engineered using 18 gauge cold rolled steel and coated with a durable RED epoxy powder coat finish. A full length stainless steel hinge provides a long lasting durable construction. One inch tall lettering silk-screened with permanent white indelible ink on 2 sides provides a full 180 degrees of viewing for immediate identification to emergency responders. The DSB (Drawing Storage Box) securely holds up to a 4" diameter 36" tall Architectural roll of drawings. With an industry standard key lock, the cabinet provides secure storage from improper access or removal of critical documentation. An additional retainer inside the box holds drawings securely upon opening the door. This cabinet also allows space to store other critical disks, USB drives, keys and contact information for the system. • Storage locations for digital media, keys and contacts I AN'� 150 9QQ1 Space Age Electronics, Inc. Fff`f K� REGISTERED www.Isae.com NFPA COMPANY // 800.486.1723 Toll Free MEMBER �7 Made In U.S.A. 508.485.0966 Local 508.485.4740 Fax Space Age Electronics, Inc. 2013 ED0572 LT10597 Rev.B 1/2 No Excuses, .lust Solutions! '"SPACE AGE ELECTRONICS, INC_ Specifications: The Drawing Storage Box (DSB) shall be UL listed, constructed of 18 gauge cold rolled steel (CRS), it shall be painted with a durable red powder coat paint. Over all dimensions 37" tall 5 1/2 wide and 4 '/4" deep. The access door shall be lettered on 2 angled sides of the cabinet providing 180 degrees of viewing. "FIRE ALARM DOCUMENTS" in White indelible letters minimum of 1" in height. The door shall have a stainless steel continuous piano hinge. The door of the DSB shall be locked with a keyed lock 3/4" barrel. Inside the cabinet shall have a strap to secure drawing in cabinet that is adjustable for size of rolled drawings. Location to hold keys and secure emergency contact information safely inside cabinet for easy access. Ordering Information: Part # Description SS000625 Drawing Storage Box (DSB) Space Age Electronics, Inc. www.Isae.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax Q Q L L Q Q R R M M D D 0 0 C C NJ U M M E E H H T T .S1 3 -- 5 1 /2" i w ON w This document is subject to change without notice, see doc # ED0479 for legal disclaimer No Excuses, Just Solutions! ED0572 LT10597 Rev.B 2/2 A ��OK f BY SPACE AGE ELECTRONICS ��0 OWN10 FEATURES 16 gauge cold rolled steel EM s,N�" construction • Available in four sizes �L Durable red powder coat • "FIRE ALARM TERMINAL LISTED CABINET" in white indelible lettering • Lift -a -way hinge door • Interior labeling of terminal �1 strips • Field indentification label inside cover • Terminal points rated for 12 gauge wire • Terminal strip rated for 20 amp max 250V (Class B/UL) 300V (CSA) TC n Terminal Cabinets Offering easy identification of fire alarm wiring junctions for troubleshooting and maintenance of system wiring, the TC Series houses 18 to 128 high barrier termination points in a variety of durable enclosure sizes. SPECIFICATIONS The TC Series Terminal Cabinets are constructed of 16 gauge colled rolled steel and finished with a durable red powder coat. The front cover is engineered with a removable formed lift -a- way hinge and displays "FIRE ALARM TERMINAL CABINET" in white screened indelible lettering. The interior of the box has field indentification labels on the inside cover corresponding to the terminal strip's labeling inside the back box. The cabinets include 18 to 120 high barrier termination points rated for 12 gauge wire. Terminal strips are rated for 20 amp max 250V (Class B/UL) 300V (CSA). CUSTOM COLORS AND BRANDING AVAILABLE O LOGR YOUR YOUR YOVR L YOUR YOV I. GO LOGO I.OG . O Pg. 1/2 ACEBOX ORDERING INFORMATION P/N# Size Termination Pts. SS000635 1 18 SS000536 1 18 SS000645 2 32 SS000651 A 64 SS000653 D 128 Size A Depicted Rer lif Width Height Depth Lock 6 1/2" 8 5/8" 2 1/2" Thumb Screw 6 1/2" 8 5/8" 2 1/2" Keyed 14" 145' 3 1 /4" Keyed 23 1/2" 13" 5 1/2" Keyed 23 1/2" 23 1/2" 5 1/2" Keyed IN AGENCY APPROVALS UOXX.S2580 UL Listed Control Unit Accessories Size 2 Depicted Terminal Point Identification www.lsae.com I toll free 1.800.486.1723 1 fax 508.485.4740 ° qm18opED 61 C Copyright 2018 Space Age Electronics, Inc. I This document subject to change without notice I LT10221 1 Rev. D 5NFPX ADA Pg. 2/2 STI STOPPER 11"D LIFT H RF PRODUCT OVERVIEW STI-1100 LR C Rus ADA Compliant BSA This protective cover has been helping to stop false fire alarms around the world for more than 40 years, without restricting legitimate alarms. All models offer excellent protection against physical damage (both accidental and intentional) and several against severe environments both inside and out. It is ideal for schools, colleges, hospitals, nursing homes, stores, hotels and public buildings of almost every kind where there is a threat of false alarms. HOW IT WORKS Stopper II consists of a clear, tamperproof, tough polycarbonate shield and frame, but the line includes models with the option of a piezo horn, spacer and gaskets. The cover accommodates most manual pull stations. When the Stopper II with horn is lifted to gain access to the protected alarm, a piercing self-contained 95 or 105 dB warning horn (at one foot) sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it drops off of the frame and a horn will sound (models with horn) until the cover is snapped back onto the frame or for the life of the battery. For more information, call 248-673-9898 or visit www.sti-usa.com. KEY FEATURES General Information Proven effective for more than 40 years in helping stop false fire alarms without restricting legitimate alarms. Can be used as a guard against physical damage to a manual pull station, with or without the optional warning horn. Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components). Design Larger sizes and surface mounted pull stations accommodated with STI-3100 conduit spacer. Weather models have closed cell gaskets. The Stopper II design is a registered trademark of Safety Technology International, Inc. Construction UL Listed to U.S. and Canadian safety standards (also for custom labeling). Installation When covering a pull station outside, UL requires stations to be listed for outdoor use. Typical working properties of polycarbonate are -40° to 250oF (-40° to 121 °C). Electronics Power source is a 9V DC alkaline battery included on standard Stopper II (remote powered unit available). Options Optional horn has a choice of 95 or 105 dB at one foot. Standard red units have "In Case of Fire..." label unless specified with "NR" (no label) or "CR" (custom label). OSafety Technology International STI Stopper III Dimensions and Technical Information MODELS AVAILABLE APPROVALS & WARRANTY Stopperll® Models Indoor Use TESTING STI-1100** With horn for flush mount It has been tested and approved or listed by: STI-1130** With horn and spacer UL/cUL Listed No. S2466 STI-1200** Without horn flush mount For fire alarm applications, UL38 requires outdoor listed stations for STI-1230** Without horn with spacer outdoor use Weather Stopper® with gaskets (Indoor/Outdoor rated) State of California (obtain local fire marshal approval) STI-1150* With horn flush mount and gaskets MEA 49-00-E (STI-1200) STI-1155* With horn surface mount and gaskets Flush models ADA Compliant. Surface models ADA Compliant for STI-1250* Without horn flush mount and gaskets operation (UL Certified No. S2466) STI-3150** Without horn surface mount and gaskets Weather Stopper versions designed to meet the requirements of IP54. Accessories The indoor/outdoor rated station covers, when mounted on a KIT-316 Louvers for STI-3100 smooth surface, provide a rain tight seal similar to a 3R enclosure KIT-1-119015 Two 3/32" Allen wrenches rating. KIT-MO2002 Clear Frame for Stopper II Series WARRANTY STI-1102 Replacement horn for cover with alarm Three year guarantee against breakage of polycarbonate in normal STI-1280 Backplate STI-3002 Weather gasket use (one year on electro mechanical and electronic components). STI-3003 Conduit gasket STI-3004 Rigid conduit gasket IMPORTANT NOTICE STI-3100 2" conduit spacer with a frame, 1/2' or 3/4" conduit entry Stopper II "FIRE" models are intended to be used in areas where STI-3104 2" conduit spacer with 1/2" or 3/4" conduit entry the incidence of false fire alarms from manual pull stations is high or (includes one 3/4" conduit entry gasket) has proven to be a serious problem. Any disadvantage of this device * Add -NR for no label on horn housing is more than balanced when one considers the consequences of Add -CR for custom label on horn housing false fire alarms, especially if fire service personnel and equipment Add -FR for French labeling are responding to a false fire alarm when they are needed for a real Add -ES for Spanish labeling fire somewhere else. Add to this the disruption to the facility when * Available in a 6-pack (STI-1100 & STI-1130 also in a 12-pack) false alarms occur. If you have, or may have, a problem with false fire alarms or physical/weather damage to your fire alarm activation devices, the Stopper II could prove invaluable. COVER *WARNINGAFor RC models: UL Listing does not permit relay 5.37 in. contacts to connect to the fire alarm or a life safety function. HORN HOUSING (137mm) 3.175 in. (81mm) The power supply for horns, according to UL Listing, cannot 1 in. be connected to a UL Listed fire alarm system. For electrical (25mm) 6 in. specifications see install book. RC models contain one set of Form (152mm) "C" dry contacts. Contacts rated 30 VAC/VDC 1 amp. SPACER E 8.875 in. 2 in. (225mm) (51mm) SIDE VIEW MODELS WITH HORN (STI-1100 Series) COVER Imo- 5.34 in. 3.175 m. in,,_, 3.18 in. (136mm) (81 mm) 2.73 in. (81mm) ��.5 in. in. 2.32 in. (70mm) (13mm)7mm) 7.4 in. 1.61 in. (59mm) (41t188mm)78 OF SPACER 2 in. in. in. SPACER ADDS (20mm)8.875 2" DEPTH (SOmm) (225mm) (S1m m) y SIDE VIEW ALL MODELS END VIEW MODELS WITHOUT HORN (STI-3150 Series) EXTERNAL DIMENSIONS: • Flush 7.2 W x 10.2 H x 3.3 Din. (183x259x84mm) • Surface 7.2 W x 10.2 H x 5.5 D in. (183x259x140mm) Printed in U.S.A., 0 1987-2020 Safety Technology International, Inc. Subject to change without notice. 05/21 TEMPORLERT a El Mechanical Temperature Monitor with Single Output • Connects to new and existing alarm systems. • No power required to operate. • Sleek, low -profile styling. • Normally open (N.O.) • Do not put console in freezer/cooler. Use an EnviroAlert with a wired sensor. Wlnland 1 1950 Excel Drive I Mankato. MN 56001 1 800.635.4269 1 WWW.WINLAND.COM Specifications Power Requirements No power required to operate Low Limit Adjust Range -30° to 120' F (-34° to 49' C) Non -condensing environment. High Limit Adjust Range -20° to 130' F (-29° to 54' C) Non -condensing environment. Minimum Temp Span 10' Recommended distance between high and low set points. Temp Accuracy ±3° F (±1.7° C) Temp Response Time TC =14 minutes Outputs Gold plated N.O. dry contacts. Not for high voltage use. Contact Output Rating 12VDC @ 50mA Weight 6 oz (0.17 kg) Dimensions 6.25 x 3.75 x 2" (15.9 x 9.5 x 5.1 cm) Mounting Key Slot Rms YVEEE COMPLIANT Visit www.winland.com, call 800.635.4269 or email info@winland.com to learn more. M Wlnland 1 1950 Excel ❑rive I Mankato. MN 56001 1 800.635.4269 1 WWW.WINLAND.COM