REVIEWED FIR2023-0048 PIPE INFOF I R2023-0048
Viking Plastics
Features
RECEIVED
Jun 29 2023
CITY OF EDMONDS
DEVELOPMENT SERVICES
DEPARTMENT
• Sizes Available (Nominal): 3/4" (DN20) through 3" (DN80) pipe diameters,
with a Standard Dimension Ratio (SDR) of 13.5 as specified in ASTM F442.
• Environmental Specifications: Indoor use only.
Maximum Ambient Temperature: 150°F (65°C)
• Hazen -Williams C Value: 150
BlazeMastei~ CPVC Pipe
• Pressure Data: Working Pressure: 175 PSI (12.1 bar) at 150°F (65°C)
• Specifications: Meets NFPA 13R and 13D standards for residential occupancies as well as
NFPA 13 standards for light hazard occupancies.
• Pipe meets or exceeds ASTM F442.
• Certified by NSF International for potable water services.
• CPVC pipe from Viking Plastics use compound cell class 23547
(demonstrated highest structural properties).
• cULus Listed, FM Approved, New York City (MEA) Approved, LPCB Approved.
CPVC PIPE PHYSICAL DATA
c uL us
LISTED
FM
NSF
LPCE;
Nominal Pipe
Size
Actual Outside
Diameter
Average Inside
Diameter
*Weight per 15'
(4,6 m) length
Length
Approvals
Part Number
Inch
DIN
Inch
mm
Inch
mm
Lb.
Kg.
Feet
M
3/4"
DN20
1.050
26,670
0.874
22,199
2.52
1,14
15
4.6
cU NSFFM
34PIPE
1"
DN25
1.315
33,401
1.101
27,965
3.93
1,78
15
4.6
1PIPE
1 1/4"
DN32
1.660
42,164
1.394
35,408
6.27
2,84
15
4.6
114PIPE
1 1/2"
DN40
1.900
48,260
1.598
40,589
8.22
3,73
15
4.6
112PIPE
2"
DN50
2.375
60,325
2.003
50,876
12.89
5,85
15
4.6
2PIPE
21/2"
DN65
2.875
1 73,000
2.423
1 61,500
18.86
1 8,55
15
1 4.6
212PIPE
3"
DN80
3.500
88,900
2.950
1 74,900
28.01
1 12,71
15
1 4.6
3PIPE
Nominal Pipe
Size
Actual Outside
Diameter
Average Inside
Diameter
*Weight per 10,
(3,05 m) length
Length
Approvals
Part Number
Inch
DIN
Inch
mm
Inch
mm
Lb.
Kg.
Feet
M
3/4"
DN20
1.050
26,670
0.874
22,199
1.68
0,76
10
3,05
cU NSFFM
34PIPE10
1"
DN25
1.315
33,401
1.101
27,965
2.62
1,19
10
3,05
1PIPE10
1 1/4"
DN32
1.660
42,164
1.394
35,408
4.18
1,90
10
3,05
114PIPE10
1 1/2"
DN40
1.900
48,260
1.598
40,589
5.48
2,49
10
3,05
112PIPE10
2"
DN50
2.375
60,325
2.003
50,876
8.59
3,90
10
3,05
2PIPE10
21/2"
DN65
2.875
73,000
2.423
61,500
12.57
5,70
10
3,05
212PIPE10
3"
DN80
3.500
88,900
2.950
74,900
18.67
8,47
10
3,05
3PIPE10
NOTE: CPVC Pipe is produced in SDR 13.5 Dimensions in accordance with ASTM F442. Standard Dimension Ratio is the ratio of the outside pipe diameter to the wall thickness of the pipe.
Blazemaster, is a registered trademark of Lubrizol.
Specifications subject to change without notice
`Empty pipe weights
IMPORTANT: Installers should receive thorough hands-on training in the proper methods of assembly and installation of CPVC products
Trusted above alITI NIKJM4
Viking Plastics
CPVC Pipe Product Specifications
BlazeMaster" CPVC Pipe
Corrosion resistant CPVC fire sprinkler pipe, when installed in strict accordance with the manufacturer's design and instal-
lation instructions, is UL and c-UL Listed by Underwriters Laboratories for use in the following:
• Meets NFPA 13R and 13D standards for residential occupancies as well as NFPA 13 standards for light hazard occupancies.
• Residential occupancies up to and including four stories in height as defined by NFPA 13R.
• Residential occupancies as defined in the Standard for Sprinkler Systems in One and Two Family Dwellings, NFPA 13D.
• Installation of private fire service mains and their appurtenances, NFPA 24.
CPVC fire sprinkler pipe from Viking Plastics shall be employed in wet pipe systems only and are not listed for outdoor use.
CPVC pipe must never be used in a system using compressed air or other gases.
CPVC pipe from Viking Plastics also carries the following
enhanced listings and approvals:
• According to UL Listing
• Can be flush at return air plenums
• Exposed system risers NFPA 13D, 13R
• Exposed basement NFPA 13D (solid wood joist)
• Extended coverage (exposed)
• 20' spacing on pendent in lieu of 15'
• 18' spacing on sidewall in lieu of 14'
• Use with combustible concealed sprinklers
• UL Listed attic sprinkler head (to protect the floor
below)
• UL Listed attic sprinkler head with wet system piping
(feed main and ridge installation)
New and enhanced listings and approvals are being pursued. Always
check with the appropriate Listing and Approval agency for details on
current listing parameters.
CPVC pipe meets all applicable standards for pressure rated applica-
tion as required in ANSI -NSF Standard 14 and complies with ANSI -NSF
Standard 61 for health effects and are marked with the NSF-pw end use
marking.
All CPVC fire sprinkler pipe shall be Listed by Underwriters Laboratories
for wet pipe systems, and shall carry a rated working pressure of 175 psi
@ 150°F (12 bar @ 65.5°C). *The FM Approval is limited to use in wet
pipe fire protection sprinkler systems for light hazard occupancies in both
concealed and exposed applications with certain restrictions.
Piping must always be installed in strict accordance to the manufacturer's
DESIGN AND INSTALLATION GUIDE, including product storage and
handling, joining methods, supporting and bracing, expansion and con-
traction allowance and testing, etc. National Fire Protection Association
(NFPA) Standards 13, 13D, and 13R must be referenced for design and
installation requirements in conjunction with the installation instructions.
• Exposed sidewall sprinkler listing for exposed pipe & fittings
• 24' extended coverage sidewall sprinkler, 12" drop, 155T
sprinkler head
• 18' extended coverage sidewall sprinkler, 12" drop, 165T
sprinkler head
• 16' extended coverage sidewall sprinkler, 12" drop, 175T
sprinkler head
• 14' standard coverage sidewall sprinkler, 12" drop, 200T
sprinkler head
Factory Mutual Approved*
• Factory Mutual Approval exposed
• Factory Mutual Approval above drop -in ceilings
• Factory Mutual Approval exposed w/Soffi-Steel soffiting
covering system
All CPVC fire sprinkler pipe from Viking Plastics is manufactured in the
USA. All CPVC pipe shall be packaged immediately after its manufacture
to prevent damage and shall be stored indoors after production, at the
manufacturing site, until shipped from the factory. The pipe shall bear the
logo of the listing agencies, and shall carry the National Sanitation Foun-
dation (NSF) seal of approval for potable water applications.
CPVC products are intended for use in areas where the maximum ambi-
ent temperature does not exceed 150°F (65.5°C). If the ambient tempera-
ture is expected to exceed this limitation, refer to the manufacturer's DE-
SIGN AND INSTALLATION GUIDE for additional information on methods
to reduce the pipe exposure temperatures. CPVC pipe is not intended to
be installed in outdoor applications. CPVC pipe is intended to be used in
wet pipe systems only and have not been investigated for use in dry pipe
systems. Special installation and design criteria relative to pipe hanger
spacings, piping and sprinkler restraint, sprinkler temperature rating,
piping locations, testing procedures and friction loss characteristics are
specified in the manufacturer's installation instructions provided with the
pipe. The manufacturer's installation instructions should be reviewed and
the Authority Having Jurisdiction consulted before installation.
Trusted above alIT" NIKJM*