BLD20181429OV E 1) -4
CITY OF EDMONDS
1215THAVENUENORTH -EDMONDS, WA 98020
-0220 - FAX: (425) 771-0221
PHONE: (425) 771
STATUS: ISSUED 12/10/2018 Pernfit BLD20181429
Expiration Date: 12/10/2019
Parcel No: 27042900306000
Project Address: 22130 HIGHWAY 99, EDMONDS
P&*1"FAT1'0WNER
APPLICANT
CONTRACTOR
DOUGSMAZDA
FIRE SYSTEMS WEST
WILCOX CONSTRUCTION
C/O F DOUGLAS IKEGAMI
CIO JAY BLACKBURN
C/O MATTHEW LESSARD
22130 HWY 99
206 FRONTAGE ROAD NORTH
234 STH AVE S
EDMONDS, WA 98026
PACIFIC, WA 98047
EDMONDS, WA 98020-
(253) 8 33-124 8
(425) 774-4185
LICENSE #: WILCOC* I 94QO EXP: 12/10/2019
JOB DESCRIPTION
INSTALLNEW FIREALARM SYSTEM FOR N14�7CONSTRUUION BUILDING
VALUATION: $15,000
PERMIT TYPE: Commercial
PERMIT GROUP: 79 - Fire Alarm
GRADING: N CYDS: 0
TYPE OF CONSTRUCTION:
RETAINING WALL ROCKERY:
OCCUPANT GROUP:
OCCUPANT LOAD -
FENCE: 0 X 0 FT.)
CODE:
IOTHER: ------- 01- HER DESC:
IZONE:
NUMBER OF STORIES: 0
VESTED DATE:
NUMBER OF DWELLING UNITS: 0
LOT 4-
BASEMENT: 0 1 ST FLOOR: 0 2ND FLOOR: 0
.252 Ing IMN,
BASEMENT: 0 1 ST FLOOR: 0 2ND FLOOR: 0
3RD FLOOR: 0 GARAGE: 0 DECK: 0 OTHER: 0
3 RD FLOOR: 0 GARAGE: 0 DECK: 0 OTHER: 0
BEDROOMS: 0 BATHROOMS: 0
1 BEDROOMS: 0 BATHROOMS: 0
FRONTSEFRACK SIDESEI-BACK REAR SETBACK
REQUIRED: PROPOSED: 7EQUIRED: PROPOSED: IREQUIRED: PROPOSED:
7EIGHT ALLOWED:O PROPOSED:O IREQUIRED: PROPOSED:
SETBACK NOTES:
I AGREE TO COMPLY WITH CITY AND STATE LAWS REGULATING CONSTRUCTION AND IN DOING THE WORK AUTHORIZED THEREBY, NO
PERSON =ED IN VIOLATION OF THE LABOR CODE OF THE STATE OF WASHINGTON RELATING TO WORKMENS COMPENSATION
INSURANCE AND RCW 18:27.
N IS NOTA PERMIT UNTIL SIGNED BY THE BUILDING OFFICIAL OR HISMER DEPUTY ANDALL FEES AREPAID.
Z::::� y*oi-C7 C'NtL'-'--) Z�64e.�z 12/10/18
Signature
Releas
Date
ATTENTION
IT IS UNLAWFUL TO USE OR OCCUPY A BUILDING OR STRUCTURE UNTIL A FINAL INSPECTION HAS BEEN MADE AND APPROVAL ORA CERTIFICATE OF
OCCUPANCY HAS BEEN GRANTED. UBC]09/ IBCI 10/ IRCI 10.
= FIRE = APPUCANT = ASSESSOR = Crfy
N NIS,
A
C3
v___
STATUS: ISSUED
BLD20181429
• Final approval on a projector fin a] occupancy approval must be granted by the Building Official prior to use or occupancy of
the building or structure. Clieckthe job card for all required City inspections including final project approval and final
occupancy inspections.
• Any request for alternate design, modification, variance or other administrative deviation (hereinafter "variance") from
adopted codes, ordinances or policies must be specifically requested in writing and be called out and identified. Processing
fees for such request shall be established by Council and shall be paid upon submittal and are non-reftindable.
• Approval of any plat or plan containing provisions which do not comply with city code and for which a variance has not been
specifically identified, requested and considered by the appropriate city official in accordance with the appropriate provision
of city code or state law does not approve any items not to code specification.
• Sound[Noise originating from temporary construction sites as a result of construction activity are exerript from the noise lirnits
of ECC Cbapter 5.30 only during the hours of 7:00arn to 6:00pm on weekdays and 10:00arn and 6:00pm on Saturdays, excluding
Sundays and Federal Holidays. At all other times the noise originating from construction sites /activities must comply with the
noise limits of Chapter 5.30, unless a variance has been granted pursuant to ECC 5.30.120.
• Applicant, on behalf of his or her spouse, heirs, assigns, and successors in interests, agrees to indemnify defend and hold
harmless the City of Edmonds, Washington, its officials, employees, and agents from any and all claims for damages of
whatever nature, arising directly or indirectly from the issuance for this pen -nit. Issuance of this permit shall not be deemed to
modify, waive or reduce any requirements of any City ordinance nor limit in any way the City's ability to enforce any ordinance
provision.
THIS PERMIT AUTHORIZES ONLY THE WORK NOTED. THIS PERMIT COVERS WORK TO BE DONE ON PRIVATE PROPERTY ONLY. ANY
CONSTRUCTION ON THE PUBLIC DOMAIN (CURBS, SIDEWALKS, DRIVEWAYS, MARQUEES, ETC.) WILL REQUIRE SEPARATE PERMISSION. PERMIT
TIME LIMIT: SEE ECDC 19.00.005(A)(6)
BUILDING
ENGINEERING (426) 771-0220 EXT. 1326
1. Go to: www.edmondswa.gov
Building Department Inspections
2. Then: SeNces
are now scheduled online. If you
FIRE (426) 775-7720
3. Then: Perm its/Development
have difficulties, please call the
4. Then: Online Permit Info
Building Department front desk for
PUBLIC WORKS (425) 771-0235
5: If you don't have one already, create a
assistance during office hours.
login (upper right hand comer)
(425) 771-0220
RECYCLING (425) 275-4801
6: Schedule your inspection
When calling for an inspection please leave the following information: Permit Number, Job Site Address, Type of Inspection
— being requested, Contact Name and Phone Number, Date Preferred, and whether you prefer morning or afternoon.
• F-Fire Alarm System Acceptance
• F-Fire Safety and Evacuation Plan
• F-Fire Compliance
• F-Addressing Visibility
• F-Fire Final
I " 1- 1 Fire Systems West, Inc.
206 FRONTAGE ROAD NORTH, SUITE C
PACIFIC, WA 98047
(253) 833-1248
FIRE ALARM
Equipment Submittal
FOR 2-�
Doug's Mazda
22130 HWY 99 — -
Edmonds, Washington
98026
R E C F- A v ED
f.�j j j
" 4 V 0 .12 1, " -1
DEVELOPMENT SERVICES
COUNTER
Farenhyt
Intelligent Fire Alarm Control Panel
IFP-100
IFP-100 is an intelligent analog/addressable fire control panel. The
basic IFP-1 00 system has a single SLC loop and four notification
appliance circuits that can be programmed for notification outputs or
auxiliary power. IFP-100 also has a built-in dual line digital fire
communicator, Form C trouble relay, and two programmable Form C
relays. The firmware has powerful features, such as detector
sensitivity, day/night thresholds, drift compensation and pre -trouble
maintenance alert.
IFP-100 supports a variety of other devices that can be added to the
system such as RA-100 remote annunciator, 5824 serial/parallel
printer interface module (for printing system reports), and 5496
intelligent power module, and SID or IDP Protocol devices.
Features
Built-in support for up tol 27 SID devices or 99 IDP detectors and 99
IDP modules
Uses standard wire —no shielded or twisted pair required
Built-in digital communicator for remote reporting of system activity
and system programming using either SIA or CID formats.
Central station reporting by point or by zone
JumpstartO auto -programming
Supports Class B (Style 4) and Class A (Style 6 or Style 7)
configuration for SLC
Distributed, intelligent power
Built-in synchronization for AMSECO, GentexO, Faraday, System
Sensor'�), and WheelockO appliances
Sensor sensitivity settings and day/night sensitivity setting
Automatic drift compensation
Notification circuits configurable as 2 Class A (Style Z), 4 Class B
(Style Y), or auxiliary power for resettable, constant, or door holder
power
Built-in annunciator with a backlit 80-character LCD display
RS-485 bus provides communication to system accessories
Built-in Form C trouble relay rated at 2.5 amps at 27.4 VDC
Two built-in Form C programmable relays rated at 2.5 amps at 27.4
VDC
SLC device locator can be used to locate a single or multiple
devices on a SLC loop
System automatically performs detector sensitivity test
13 preset notification cadence patterns (including ANSI 3.41) and
four user programmable patterns
Built-in RS-232 and USB interface for programming
Upload or download programming, event history, or detector status
onsite or from a remote location using a PC and 5650/5651 Silent
Knight Software Suite (SKSS)
Improvements in SKSS deliver five times faster u pload/down loads
Non volatile event history stores up to 1000 events
125 Software zones and 125 output groups
Programmable date setting for Daylight Saving Time
SILENT
KNIGHT
by Honeywell
Intelligent Fire Alarm Control Pane
Agency Listings
r—
MEA
429-92-E Vol. XIV
IFP-100
6 amp power supply and maximum charging
capacity of 35 amp hours (An additional cabinet
enclosure is required for batteries in excess of
18 amp hours)
Integrated dead front panel protects operator
from exposure to electrical components
The FACP enclosure features a Plexiglass@)
viewing window to protect annunciator
Programmable to automatically display oldest
event first or display tally of system events
Acknowledge function allows operator to keep
track of event status
Installation
The IFP-1 00 can be surface or flush mounted.
Compatibility
The IFP-100 SLC supports multiple device types of
the same protocol:
SID
IDP
You cannot mix SID and IDP devices on a FACP.
See SID Devices data sheet (PN 350360) and IDP
Device Protocol Devices data sheet (PN 350361).
P/N 350388 Rev K
2013 Honeywell International Inc.
Specifications
Physical
Flush Mount Dimensions: 14.5"W x 24.75"H x 3.5"D
(36.8 W x 62.9 H x 8.73 D cm)
Overall Dimensions: 16"W x 26.4"H x 4.65"D
(40.6 W x 67 H x 11.8 D cm)
Weight: 28 lbs. (12.8 kg)
Color: Red
Environmental
Operating Temperature: 321F — 120'F (OOC — 490C)
Humidity: 10% — 93% non -condensing
Electrical
Primary AC: 120 VRMS @ 50/60 Hz, 2.5A
Total Accessory Load: 6A @ 27.4 VDC power -limited
Standby Current: 170 mA
Alarm Current: 325 mA
Battery Charging Capacity: 7 to 35 AH
Battery Size: 18 AH max. allowed in control panel cabinet.
Larger capacity batteries can be housed in RBB accessory
cabinet.
Notification Appliance Circuits
Four circuits that can be programmed individually as:
Notification Circuits: 3A per circuit @ 27.4 VDC, power -limited
Auxiliary Power Circuits: 3A per circuit @ 27.4 VDC,
power -limited
Approved Releasing Solenoids
Manufacturer Part Number Rating
Asco T821 0A1 07 24 VDC. 3 A
Asco 821 OG207 24 VDC, 3 A
Ordering Information
IFP-100 Intelligent Fire Alarm Control Panel.
SBUS Accessories
RA-100
Remote Annunciator. Same operation and
similar appearance to FACP annunciator.
RA-100OR
Remote Annunciator. Four line LCD
annunciator with 20 characters per line.
Red.
RA-1000
Remote Annunciator. Four line LCD
annunciator with 20 characters per line.
Gray.
RPS-1 000
Intelligent Power Module.
5496
Intelligent Power Module.
5824
Serial/Parallel Printer Interface Module.
5880 LED 1/0 Module.
5865-3 & 5865-4 LED Fire Annunciators.
5883 Relay Interface Board.
SD and IDP Devices
See the specification sheets listed below for a complete listing
of the SD and IDP devices.
Indicator Lights 350360 SD Devices Specification Sheet.
Alarm (Red): Flashes when in alarm; solid when alarm silenced 350361 IDP Devices Specification Sheet.
Supervisory (Yellow): Flashes when a supervisory condition Miscellaneous Accessories
exists; solid when supervisory silenced 5650/5651 Silent Knight Software Suite. Provides
Trouble (Yellow): Flashes when a trouble condition exists; solid programming, u pload/down load, and event
when trouble silenced reporting.
Silenced (Yellow): Solid when an alarm, trouble or supervisory 5670 Silent Knight Software Suite. Provides
condition has been silenced but not yet cleared facility monitoring.
Power (Green): Flashes for AC failure; solid when power
systems are normal
Telephone
Requirements: FCC Part 15 & Part 68 approved
Jack: RJ31X (two required)
Approvals
NFPA 13, NFPA 15, NFPA 16, NFPA 70, &
NFPA 72: Central Station; Remote Signalling; Local Protective
Signalling Systems; Auxiliary Protected Premises Unit; & Water
Deluge Releasing Service. Suitable for automatic, manual,
waterflow, sprinkler supervisory (DACT non -coded) signalling
services.
Other Approvals: UL Listed', CSFM 7165-0559:0142;
MEA 429-92-E Vol. XIV; OSHPD (CA) OSP-0065-1 0
RBB Remote Battery Box Accessory Cabinet.
Use if backup batteries are too large to fit
into FACP cabinet. Dimensions:
16" W x 10" H x 6" D
(406 mm W x 254 mm H x 152 mm D)
SK-SCK Seismic Compliance Kit
SILENT This document is not intended to be used for installation purposes. We try to keep our
product information up-to-date and accurate. We cannot cover all specific applications
KNIGHT or anticipate all requirements. All specifications are subject to change without notice.
For more information. contact Silent Knight 12 Clintonville Road, Northford, CT 06472-
by Honeywell 1610 Phone: (800) 328-0103, Fax: (203) 484-7118. For Technical Support, please call Made in the U.S.A.
800-446-6444. www.farenhyt.com
Farenhyt
Intelligent Photoelectric Smoke Detector
& Photoelectric Smoke with Thermal
IDP-Photo, IDP-Photo-T and IDP-PhotoR
The IDP-Photo is a photoelectric smoke detector and the
IDP-Photo-T is a photoelectric smoke detector with thermal.
These plug in smoke detectors, with integral communication,
provide features that surpass conventional detectors and are
for use with Silent Knight IFP-series fire alarm control panels
(FACPs).
Detector sensitivity can be programmed from the FACP
software. Sensitivity is continuously monitored and reported to
the FACP. Point ID capability allows each detector's address
to be set with rotary address switches, providing exact
detector locations for selective maintenance when chamber
contamination reaches unacceptable levels.
IDP-Photo and IDP-Photo-T have a unique optical sensing
chamber that is engineered to sense smoke produced by a
wide range of combustion sources. In the IDP-Photo-T, dual
electronic thermistors add 135OF (571C) thermal technology to
maximize detection.
The IDP-PhotoR is a remote test capable detector for use with
the DNR (W) duct smoke detectors.
Features
- Sleek, low -profile design
Reliable analog communications for trouble -free operation
Age resistant polymer housing
Dual electronic thermistor design on the IDP-Photo-T
Superior EMI resistance for reliability
Simple field cleaning for code compliance
Variety of mounting options to meet any application
Dual LED indicators for 360* visibility
Detector transmits signal to indicate maintenance is
required
Optional remote LED annunciator (System Sensor@ PN
RA1 OOZ)
Plug-in mounting provides ease of installation
Tamper -proof feature available on mounting bases
Listed for use in duct applications
Rotary address switches for fast installation
UL Listed
SILENT
KNIGHT
by Honeywell
T 1.
I
MEA
225-02-E Vol. V
IDP-Photo (Base not Included)
Installation
The IDP-Photo and IDP-Photo-T plug into a
compatible IDP-series detector base. The
IDP-PhotoR is a remote test capable detector
for use with the DNR (W) duct smoke
detectors
Compatibility
The IDP-Photo, IDP-Photo-T and IDP-PhotoR
are compatible with the following IDP-series
detector bases:
- B21 OLP 6" Mounting Base
• B501
4" Mounting Base
• B224BI
6" Isolator Base
• B224RB
6" Relay Base
• B200SR
6" Sounder Base
The IDP-Photo, IDP-Photo-T and IDP-PhotoR
are compatible with the following FACPs:
IFP-2000 / RPS-2000 Intelligent Fire Panel
IFP-2000ECS Emergency Communication
System with Fire Panel
IFP-1000 / ECS Intelligent Fire Panel
IFP-100 / ECS Intelligent Fire Panel
IFP-50 Intelligent Fire Panel
IFP-25 Intelligent Fire Panel
P/N 350280 Rev G
Copyright @ 2015 Honeywell International Inc.
Class A Optional Wiring
................. .................... .......................... . ............... .............
Wiring IDP-Serles Detector Mounting Bases
Wiring IDP-Series Detector Mounting Bases
Specifications*
Physical
Height: 2.0" (5.0 cm)
Diameter: 4.1" (10.4 cm) installed in B501 base
Electrical
Operating Voltage: 15-32 VDC
SLC Standby and Alarm Current: 300 pA
Environmental
Operating Temperature
I DP -Photo: 32' — 1201F (01C — 491C)
I DP-Photo-T. 321 — I 000F (OOC — 380C)
Humidity: 10% — 93% non -condensing
Other Ratings
IDP-Photo-T Thermal: Fixed temperature setpoint 1351F
(57-C)
Velocity: 0 — 4000 fpm (0 — 20 rn/sec) (suitable for
installation in ducts)
IDP-Photo Insect Screen Hole Size: 0.016" (0.41 mm)
nominal
Ordering Information
IDP-Photo Photoelectric Smoke Detector
IDP-Photo-T Photoelectric Smoke Detector with
Thermal (1 350F)
IDP-PhotoR Photoelectric smoke detector, remote
test capable, for use with DNR (W) duct
smoke detector
Accessories
RA1 OOZ
Remote LED Annunciator.
XR2B
Detector Removal Tool. A removal and
replacement tool for IDP plug-in
detectors. Includes the T55-127-000.
M02-04-01
Detector Test Magnet.
M02-09-00
Test Magnet with Telescoping Handle.
XP-4
Extension Pole for XR213. Extends from
5 — 15 ft.
T55-127-000
Detector Removal Head.
BCK-200B
Black Detector Kit. For IDP-series
detectors.
Unless otherwise
noted, specifications apply to IDP-Photo and
IDP-Photo-T.
SILENT This document is not intended to be used for installation purposes. We try to keep our product information up-
to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications
KNIGHT are subject to change without notice. For more information, contact Silent Knight 12 Clintonville Road,
01 Northford, CT 06472-1610 Phone: (800) 328-0103, Fax: (203) 484-7118.
by Honeywell For Technical Support, Please call 800-446-6444. www.farenhyt.com
Farenhyt
Addressable Single Action and Dual Action
Pull Stations
IDP-Pull-SA & IDP-Pull-DA
The IDP-Pull-SA is a single action pull station requiring only one
motion to activate the station. The IDP-Pull-DA is a dual action
pull station requiring two motions to active the station. Both pull
stations are designed to work with Silent Knight IFP-series fire
alarm control panels (FACPs).
Features
Installer can open station without causing an alarm condition
Dual -color LED is visible through handle of station blinks green
to indicate normal operation and remains steady red in an alarm
condition
Key operated test and reset lock using lock plate actuator
Key matches compatible FACP locks
Meets the Americans with Disabilities Act Accessibility
Guidelines (ADAAG) controls and operating mechanisms
guidelines (Section 4.1.3[13])
Meets ADA requirement for 5 lbs maximum pull force to active
Shell, door, and handle molded from durable LEXANO
Reliable analog communications for trouble -free operation
- Braille text on station handle
Handle latches in down position and the word Activated
appears, clearly indicating the station has been pulled
Rotary address switches for fast installation
UL Listed, including UL 38, Standard of Manually Actuated
Signaling System
Installation
The IDP-Pull-SA and IDP-Pull-DA can be surface mounted to an
SB-1/0 surface back box or semi -flush mounted on a standard
single -gang with a minimum depth of 2.13"(5.40 cm) or double -
gang or 4" (10.61 cm) square electrical box. You can also use the
optional (System Sensor@ PN BG-TR) trim ring if the station is
being semi -flush mounted.
SILENT
KNIGHT
by Honeywell
Agency Listings
IDP-Pull-SA
IM
MEA
67-02-E Vol. IX
For IDP-Pull-DA
IN
SLC
OUT
Compatible FACP
Wiring IDP-Pull-SA & IDP-Pull-DA Pull Stations
Specifications*
Physical
Height: 5.5" (14 cm)
Width: 4" (10.2 cm)
Depth: 5.4 oz. (3.7 cm)
Housing Material: LEXAN polycarbonate resin
Bi-Colored LED:
Blinking Green: Normal
Steady Red: Alarm
Switch: Single pole, single throw (SPST) normally open (N/0)
switch which closes upon activation of the pull station
Electrical
Operating Voltage: 15-32 VDC
Operating Current (LED flashing): 300 pA
Wire Gauge: Up to 12 AWG (3.1 MM2)
Environmental
Operating Temperature 32' — 120'F (OOC — 49'C)
Humidity: 10% — 93% non -condensing
Ordering Information
IDP-Pull-SA Single Action Pull Station
IDP-Pull-DA Dual Action Pull Station
Accessories
BG-TR Optional trim ring.
SB-1/0 Surface backbox, indoor/outdoor.
Unless otherwise noted, specifications apply to IDP-Pull-SA and
IDP-Pull-DA.
SILENT This document is not intended to be used for installation purposes. We try to keep our
product information up-to-date and accurate. We cannot cover all specific applications
KNIGHT or anticipate all requirements. All specifications are subject to change without notice.
For more information, contact Silent Knight 12 Clintonville Road, Northford, CT 06472-
by Honeywell 1610 Phone: (800) 328-0103, Fax: (203) 484-7118. For Technical Support, Please call
800-446-6444. www.farenhyt.com
Made in the U.S.A.
Farenhyt
Addressable Relay Module
IDP-Relay
The IDP-Relay is an addressable relay module for use with
Silent Knight IFP-series fire alarm control panels (FACPs).
The
IDP-Relay allows a Silent Knight FACP to switch discrete
contacts by code command. The relay contains two isolated
sets of Form C contacts, which operate as a DPDT switch. No
supervision is provided for the notification appliance circuit.
The IDP-Relay contacts can be used for virtually any normally
open or normally closed application. Each IDP-Relay is
programmed with a unique signaling line circuit (SLC) loop
address. When an event occurs that controls the IDP-Relay,
the relay is triggered by the FACP.
Features
- Two sets of Form C contacts
Contacts are rated for a variety of amps (see Specifications)
- Panel controlled status LED that flashes green in normal
state and is solid red in alarm
Relay programming is completely flexible —can be mapped
to zone conditions
- Polling LED visible through the cover plate
Attractive ivory cover plate
Rotary address switches for fast installation
SEMS screws for easy wiring
UL Listed
Relay Contact Ratings
Current
Rating
Max Voltage
Load
Description
Application
3 A
30 VDC
Resistive
Noncoded
2 A
30 VDC
Resistive
Coded
0.7 A
70.7 VDC
PF = 0.35
Noncoded
0.9 A
125 VAC
Resistive
Noncoded
0.46 A
30 VDC
L/R 20 ms
Noncoded
0.5 A
125 VAC
PF 0.75
Noncoded
0.3 A
125 VAC
PF 0.35
Noncoded
2 A
25 VAC
PF= O�35
Noncoded
Agency Listings
SILENT
KNIGHT
by Honeywell
MEA
386-02-E Vol 11
IDP-Relay
Compatibility
The IDP-Relay is compatible with the
following FACPs:
IFP-2000 / RPS-2000 Intelligent Fire Panel
IFP-2000ECS Emergency Communication
System with Fire Panel
IFP-1000 / ECS Intelligent Fire Panel
IFP-100 / ECS Intelligent Fire Panel
IFP-50 Intelligent Fire Panel
. IFP-25 Intelligent Fire Panel
Installation
The IDP-Relay mounts directly into a 4"
square electrical box. The box must have a
minimum depth of 2-1/8". A surface mount
electrical box (System Sensor-O PN SMB500)
is available from Silent Knight.
P/N 350290 Rev J
2015 Honeywell International Inc.
TO NEXT
DEVICE W
CONNECT MODULES TO LISTED COMPATIBLE
CONTROL PANELS ONLY.
RELAY CONTROL
MODULE
C?, 4 TIOP, e
T11 @
Relay Common 2
Normally Closed 2
Normally Open 2
Relay Common 1
Normally Closed 1
Specifications
Physical
4.675" H x 4.275" W x 1.4" D
Shipping Weight: 6.3 oz (196 g)
'n
7 7 T4
5 'a 5
5
T5
10
TENS 0 ONES
Environmental
Operating Temperature: 320F — 120OF (OOC — 490C)
Humidity: 10% — 93% non -condensing
Electrical
Operating Voltage: 15 — 32 VDC
End -of -Line Resistance: Not used
SLC Standby & Alarm Current: .255mA max @ 24 VDC
(one communication every 5 sec with LED enabled)
Unused
Normally Open I
-L� FROM PANEL
OR PREVIOUS
W DEVICE
If any wiring to Terminals 4-10 is
Nonpower limited, The CB500 barrier
is required. The CB500 includes a
Nonpower limited label, which
must be placed over the Power
Limited terminal information on
the name plate label.
'NOTE: ANY FAULT INTHE POWER SUPPLY IS LIMITED
TOTHAT ZONE AND DOES NOT RESULT IN A FAULT IN
A SEPARATE ZONE.
Ordering Information
IDP-Relay Relay Module
Accessories
SMB500 4" Square Surface Mount Electrical Box
CB500 Module Barrier
This document is not intended to be used for installation purposes. We try to keep our
SILENT product information up-to-date and accurate. We cannot cover all specific applications or
KNIGHT anticipate all requirements. All specifications are subject to change without notice. For more
information, contact Silent Knight 12 Clintonville Road, Northford, CT 06472-1610 Phone:
by H oneywell (800) 328-0103, Fax: (203) 484-7118. For Technical Support, Please call Assembled in the'
800-446-6444. www.farenhyt.com U.S.A.
_,gap
Ondazu 0(34(3?c�aboa-
CMRU� M-u(2115)GS and
N (Dun MP(21�ez Vol?
C�S'Mong n� p7ok�&Uanz
System Sensor L -Series audible visible notification
products are rich with features guaranteed to cut
installation times and maximize profits with lower
current draw and modern aesthetics.
Features
• Plug-in design with minimal intrusion into the back box
• Tamper -resistant construction
• Automatic selection of 12- or 24-volt operation
at 15 and 30 candela
• Field -selectable candela settings on ceiling units:
15, 30, 75, 95, 115, 150, and 177
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and two volume selections
• Universal mounting plate for ceiling units
• Mounting plate shorting spring feature checks wiring continuity
before device installation
• Electrically Compatible with legacy SpectrAlert and SpectrAlert
Advance devices
• Compatible with MDL3 sync module
• Listed for ceiling mounting only
Agency Listings
SIGNALING
LISTED
55512
FM.pp—d e,ep
7125-1653 (1504
S4 J
V ALERT —dO�
1135-�600503
3057383
ii�
_77:
<
The System Sensor L-Series offers the most versatile and
easy -to -use line of horns. strobes, and horn strobes in the industry
with lower current draws and modern aesthetics. With white and red
plastic housings, wall and ceiling mounting options, System Sensor
L-Series can meet virtually any application requirement.
The entire L-Series product line of ceiling -mount strobes and horn
strobes include a variety of features that increase their application
versatility while simplifying installation. All devices feature a plug-in
design with minimal intrusion into the back box, making installations
fast and foolproof while virtually eliminating costly and time-
consuming ground faults.
To further simplity installation, the L-Series utilizes a universal
mounting plate so installers can mount them to a wide array of back
boxes. With an onboard shorting spring, installers can test wiring
continuity before the device is installed.
Installers can also easily adapt devices to a suit a wide range of
application requirements using field -selectable candela settings,
automatic selection of 12- or 24-voll operation, and a rotary switch
for horn tones with two volume selections.
L-Series Specifications
General
L-Series ceiling -mount strobes and horn strobes shall mount to a standard 4 x 4 x 11/2-inch back box, 4-inch octagon back box, or double -
gang back box. Two -wire products shall also mount to a single -gang 2 x 4 x 17/8-inch back box- A universal mounting plate shall be used
for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series
products, when used with the Sync-Circuif" Module accessory, shall be powered from a non -coded notification appliance circuit output
and shall operate on a nominal 12 or 24 volts. When used with the Sync -Circuit Module, 12-volt-rated notification appliance circuit outputs
shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor
L-Series products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full -wave rectified unfiltered power supply.
Ceiling strobes and horn strobes shall have field -selectable candela settings including 15, 30, 75. 95:115, 150, and 177.
Strobe
The strobe shall be a System Sensor L-Series Model listed to UL 1971 and shall be approved for fire protective service. The strobe
shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible
signaling appliances, flashing at 1 Flz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and
associated lens/reflector system.
Horn Strobe Combination
The horn strobe shall be a System Sensor L-Series Model - listed to UL 1971 and UL 464 and shall be approved for fire protective
service. The horn strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act
requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist
of a xenon flash tube and associated lens/reflector system. The horn shall have two audibility options and an option to switch between a
temporal three pattern and a non -temporal (continuous) pattern. These options are set by a multiple position switch. The horn on horn strobe
models shall operate on a coded or non -coded power supply.
Synchronization Module
The module shall be a System Sensor Sync -Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module
shall synchronize L-Series strobes at 1 Flz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns
on horn strobe models over a single pair of wires. The module shall mount to a 4 11/16 x 4 11/16 x 2 1/18-inch back box. The module shall also
control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more
synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply
�w
g =6,
Standard Operating Temperature 32oF to 120oF (OoC to 49oC)
Humidity Range 10 to 93% non -condensing
Strobe Flash Rate 1 flash per second
Nominal Voltage Regulated 12 VDC or regulated 24 DC/FWR1
Operating Voltage Range 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
Operating Voltage Range (MDL3) 8.5 to 17.5V (12 V nominal) or 16.5 to 33 V (24V nominal)
Input Terminal Wire Gauge 12 to 18 AWG
Ceiling -Mount Dimensions (including lens) 6.8" diameter x 2.5" high (173 mm diameter x 64 mm high)
Ceiling -Mount Surface Mount Back Box Skirt Dimensions 6.9"diameter x 3.4" high (175 mm diameter x 86 mm high)
(SBBCRL, SBBCWL)
Notes:
1. Full Wave Rectified (FWR) voltage is a non -regulated, firne-varying power source that is used on sorne power supply and panel outputs.
2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 30 cd.
AVDS868M
UL Current Draw Data
I . WILL
B-175 Volts
16-33 Volts
Candela Dc
DC
FWR
15 87
41
60
30 153
63
86
75 N/A
ill
142
95 N/A
134
164
115 N/A
158
191
150 N/A
189
228
177 N/A
226
264
83=0
8-175 Volts
16-33 Volts
DC Input 15cd
30cd
15cd
30cd
75cd
95cd
115cd
150cd
1177ccl
Temporal High 103
167
71
90
143
165
18
217
254
Temporal Low 96
165
54
71
137
161
185
211
249
Non -Temporal High 106
173
71
90
141
165
187
230
273
Non-Temportal Low 95
166
54
71
124
161
17
216
258
3.1 K Temporal High ill
164
69
94
147
163
184
229
257
3.1 K Temporal Low 103
163
54
88
143
155
185
212
252
3. 1 K Non -Temporal High ill
172
69
94
144
164
20
229
271
3- 1 K Non -Temporal Low 103
169
54
88
131
155
187
217
259
16-33 Volts
FWR Input 15cd
30cd
75cd
95cd
115ccl
150ccl
177ccl
Temporal High 107
135
179
198
223
254
286
Temporal Low 78
101
151
172
199
229
262
Non -Temporal High 107
135
179
198
223
254
286
Non-Temportal Low 78
101
151
172
199
229
262
3.1 K Temporal High 108
135
179
200
225
255
289
3. 1 K Temporal Low 79
101
150
171
196
229
260
3.1K Non -Temporal High 108
135
179
200
225
255
289
3. 1 K Non -Temporal Low 79
101
150
171
196
229
260
Horn Strobe Tones and Sound Output Data
8-17.5
16-33
Volts
Volts
Switch Position Sound Pattern
dB
DC
DC
FWR
1 Temporal
High
84
89
89
2 Temporal
Low
75
83
83
3 Non -Temporal
-High
85
90
90
4 Non -Temporal
Low
76
84
84
5 3-1 KHz Temporal
High
83
88
88
6 3.1 KHz Temporal
Low
76
82
82
7 3.1 KHz Non -Temporal
High
84
89
89
8 3-1 KHz Non -Temporal
Low
77
83
83
AVDS86800
L-Series Dimensions
W t).
2.47
1.37
Ceiling -Mount Horn Strobes
Ceiling Mount Horn Strobes with Ceiling Surface Mount Back Box
L-Series Ordering Information
Ceiling Horn Strobes
PC2RL 2-Wire, Horn Strobe. Red
PC2WL 2-Wire. Horn Strobe, White
Ceiling Surface Mount Back Box
Ceiling Strobes
SCRL Strobe, Red
SCWL Strobe, White
SCWL-CLR-ALERT Strobe, White, ALERT
Accessories
TRC-2
Universal Ceiling Trim Ring Red
TRC-2W
Universal Ceiling Trim Ring White
SBBCRL
Ceiling Surface Mount Back Box, Red
SBBCWL
Ceiling Surface Mount Back Box, White
1 020 7 System Sensor
-5 Y 5 TO W 3825 Ohio Avenue - St. Charles, IL 60174 Product specsficat—s subje.: Tcha-ge w1hou. notice, Viet systemsersor,com
10'Wren! prod,jct nfoimafion� inciuciing the iatest version of this data Sheet.
SEA15OR Phone: 800-SENSOR2 - Fax: 630-377-6495 AVDSB6801 - 0311 ,
Sysns
SSMISSV Series
Alarm Bells
System Sensor� SSM and SSV series olorm bells ore
low current, high decibel notification appliances for
use in fire and burglary systems or other signaling
opplications.
Features
Approved for indoor and outdoor use
Low current draw
High c1B output
Available in six-inch, eight -inch, and ten -inch sizes
AC and DC models
DC models polarized for use with supervision circuitry
Mount directly to standard four -inch square electrical box indoors
SSM and SSV series come pre -wired
Agency Listings
& (q� �> , MEA
LISTED APPRWED approved
33
Reliable Performance. The SSM and SSV series provide loud
resonant tones.The SSM series operates on 24VDC and are motor
driven, while the SSV series operates on 120VAC utilizing a vibrating
mechanism.
Simplified Installation. For indoor use, the SSM and SSV series
mount to a standard four -inch square electrical box. For outdoor
applications, weatherproof back box, model number WBB, is used.
The SSM and SSV series come pre -wired, to reduce installation time.
The SSM series incorporates a polarized electrical design for use with
supervision circuitry.
SSM/SSV Specifications
Model shall be a SSM or �SVSencs alai ni bel I Be I Is sh a I I have unceidoine stiikers and operating rnechanisrns- Gongs on said bells shall be no smaller t h a I I
nominal 678710-(speci4, si7e) with an operating voltage of) 4VDC or I 20VAC (specilly by part number). Bells shall be suitable for surface or ser-ni-flush
mounting. Outdoor Surface mounted installations sh a I I be weather proof (us ing optionaIWBB weatherproof electrical box). Otherwise bells sh a I I men tit to
a standard 4- square electrical box having a maximum project ion of 21/2". Bel Is shall be located as shown on the drawings or as determined by the Authority
Having Jurisdiction- Bells shall be listed for incloor/ouldocir use by Underwriters Laboratories and the California State Fire Marshal, and approved by Factory
Mutual and MEA.
1r;. 31
Operating Temperature Range —3 1 T i o 140'F
Operating Voltage
SSM series: 24 VDC
SSVseries 120VAC
Termination
Provided with 2 sets of leads for in/out wiring
Service Use
Fire Alarm, General Signaling,
Burglar Alarm
Warranty
3 years
i5�1 i
Model
- ;,;,�,,,,,�,,,,,,,,�,�,,��,—,-,���,
Gong Diameter
(inches)
Nominal Voltage
o' �' ]m
Operating Voltage Maximum Current
Limit
712M
Sound Output (dBA)
SSM24-6
6
Regulated 24VDC
16to33VDC
DC-31.11 rnA/ FWR-53.SmA
82
SSM24-8
8
Regulated 24VDC
16to33VDC
DC-3 1.1 mA/ FWR-53.SmA
80
SSM24-1 0
10
Regulated 24VDC
16to33VDC
DC-3 1.1 mA/ FWR-53.5mA
81
SSVI 20-6
6
Regulated 120VAC
96 to 132VAC
53mA
85
SSV120-8
8
Regulated 120VAC
96to132VAC
53mA
82
SSV120-10
10
Regulated 120VAC
96 to 132VAC
53mA
82
* Sound output measured at Underwriter Laboratories, as specified in UL464
Ordering Information
SSM24-6
SSM24-6A
Bell, 6", 24VDC, Polarized, 82dBA
SSM24-8
SSM24-8A-
Bell, 8", 24VDC, Polarized, 8OdBA
SSM24-1 0
SSM24-IOA
Bell, 10", 24VDC, Polarized, 81 dBA
SSVI 20-6
SSVI 20-6A
Bell, 6", 120VAC, 85dBA
SSV1 20-8
SSVI 20-8A
Bell, 8", 120VAC, 82dBA
SSV120-10 SSVI 20-1 OA Bell, 10", 120VAC, 82clBA
WBB Weather proof back box for SSM and SSV series, when installed outdoors
ousym—S'—'
3825 Ohio AvenLJC - St, Charles, IL 60174 Rdw s�hgv Q2'ha-9ew"h�)%not-
c xm. p,oduct mim- mon. _1.d .. r1h, laim -,- , f th , d- -,�m
5OW51 GIR Phone: 800-SENSOR2. Fax: 630-377-6495 A- �02 6D-01 0 - . 08/11 - -2 ! 70
Outdoor Selectable -
Output Horns,
Strobes, and
Horn Strobes for
Wall Applications
Spectrkert0l' Advance outdoor audible visible products
are rich with features that cut installation times and
maximize profits,
Features
• Weatherproof per NEMA 4X, IP56
• Listed to UL 1638 (strobe) and UL 464 (horn)
• Compatible with System Sensor synchronization protocol and
legacy SpectrAlert products
• Field -selectable candela settings: 15, 15/75, 30, 75. 95, 110, 115,
135, 150, 177, and 185
• Automatic selection of 12- or 24-voll operation at 15 and
15/75 candela
• Rotary switch for horn tone and three volume selections
• Horn rated at 88+ dBA at 16 volts
• Rated from —40*F to 151 IF
• Universal mounting plate with an onboard shorting spring that
tests wiring continuity before devices are installed
• Plug-in design with minimal intrusion into the back box
• Tamper- resistant construction
• Listed for ceiling or wall mounting
Agency Listings
S IGNALIN
G
F M MEA 7300-1653 'E7 (ou�docr ber')
LISTED 7125-1853'88 (h., I �1,
1 " AP, ... �u appro�ed
7135.!653
SPECTRA4ert
kALA92��
SpectrAllert Advance offers the broadest line of outdoor horns,
strobes, and horn strobes in the industry With white or red plastic
housings, wall or ceiling mounting options, and plain or FIRE -printed
devices, SpectrAlert Advance can meet virtually any application
requirement, including indoor, outdoor, wet, and dry applications in
temperatures from —40'F to 151 IF.
Like the entire SpectrAlert Advance line, outdoor horns, strobes.
and horn strobes for wall applications include a variety of features
that increase application flexibility and simplify installation. First..
field -selectable settings, including candela, automatic selection of
12- or 24-volt operation, horn tones, and three volume options enable
installers to easily adapt devices to meet requirements.
Next, SpectrAlert Advance devices use a universal mounting plate
for both wall and ceiling applications. This mounting plate includes
an onboard shorting spring that ensures wiring continuily before
devices are installed, so installers can verify proper wiring without
mounting the devices and exposing them to potential construction
damage. Once the plates are mounted, all SpectrAlert Advance
devices utilize a plug-in design with a single captured screw to
speed installation and virtually eliminate costly ground faults.
Outdoor devices ship with weatherproof plastic back boxes (metal
back boxes are available separately) that accommodate in -and -
out wiring for daisy chaining devices. Plastic back boxes feature
removable side flanges and improved resistance to saltwater
corrosion. Knock -outs located on the back eliminate the need to drill
holes for screw -in mounting. Plastic and metal weatherproof back
boxes come with 3/4-inch top and bottom conduit entries and -X-inch
knock -outs at the back. A screw -in NPT plug with an 0-ring gasket
for a watertight seal is included with each back box.
SpectrAlert Advance Outdoor Horn, Strobe, and Horn Strobe Specifications
General
SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall
be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate.
Also. SpectrAlert Advance products. when used with the Sync -Circuit'" Module accessory, shall be powered from a non -coded notification
appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the SynceCircuit Module, 12-voll-rated notification
appliance circuit outputs shall operate between 9 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 17
and 33 volts. Outdoor SpectrAlert Advance products shall operate between -40 and 151 degrees Fahrenheit from a regulated DC or full -wave
rectified unfiltered power supply Strobes and horn strobes shall have field -selectable candela settings including 15, 15/75, 30r 75: 95� 110,
115, 135, 150, 177, and 185.
Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model _ listed to UL 1971 and shall be approved for fire protective service.
The strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for
visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved
per UL. The strobe shall be suitable for use in wet environments.
Horn Strobe Combination
The horn strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and UL 464 and shall be approved for
fire protective service. The horn strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with
Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe
light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to
switch between a temporal three pattern and a non -temporal (continuous) pattern. These options shall be set by a multiple position switch.
On four -wire products. the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or
non -coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The
horn strobe shall be suitable for use in wet environments.
Operating Temperature -40'F to 151'F (-40'C to 66�C,I
Strobe Flash Rate 1 flash per second
Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWRI
Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
Input Terminal Wire Gauge 12 to 18 AWG
Wall -Mount Dimensions (including lens) 5.6-L x 4.7-W x 2.5-D (142 mm L x 119 mm W x 64 mm D)
Horn Dimens! ns 5.6-L x 4.7-W x 1.3-D (142 mm L x 119 mm W x 33 mrn D)
Wall -Mount Weatherproof Back Box Dimensions (SA-WB13) 5.7"L x 5.1 -W x 2.0-D (145 mm L x 130 mm W x 51 mm D)
Notes;
1. Full Wave Rectified (FWR) voltage is a non -regulated, time -varying power source that is used on some power supply and panel outputs
2. P, S, PC. and SC products will operate at 12 V nominal only for 15 and 15/75 cd.
Avosoi2oi
UL Current Draw Data
Standard
Candela
Range
8- 175 Volts 16-33 Volts
Candela DC
FWR DC FWR
15 123 128 66 71
15/75 142 148 77 81
30 NA NA 94 96
75 NA NA 158 153
95 NA NA 181 176
110 NA NA 202 195
115 NA NA 210 205
B-175 Volts 16-33 Volts
Sound Pattern dB DC FWR DC FWR
Temporal High 57 55 69 75
Temporal Medium 44 49 58 69
Temporal Low 38 44 44 48
Non -Temporal
High 57 56 69 75
Non -Temporal
Medium 42 50 60 69
Non -Temporal
Low 41 44 50 50
Coded
High 57 55 69 75
High 135
NA
NA
228
207
Coded
Medium 44 51 56
69
Candela 150
NA
NA
246
220
Coded
Low
40 46 52
50
Range 177
NA
NA
281
251
185
NA
NA
286
258
R. f
MT,
MERIT"
IrRITTI,
8-IZ5
Volts
16-33 Volts
DC Input
is
15/75
15
1 Y75 30
75
95
110
115
Temporal High
137
147
79
90
107
176
194
212
218
Temporal Medium
132
144
69
80
97
157
182
201
210
Temporal Low
132
143
66
77
93
154
179
198
207
Non -Temporal High
141
152
91
100
116
176
201
221
229
Non -Temporal Medium
133
145
75
85
102
163
187
207
216
Non -Temporal Low
131
144
68
79
96
156
182
201
210
FWR Input
Temporal High
136
155
88
97
112
168
190
210
218
Temporal Medium
129
152
78
88
103
160
184
202
206
Temporal Low
129
151
76
86
101
160
184
194
201
Non -Temporal High
142
161
103
112
126
181
203
221
229
Non -Temporal Medium
134
155
85
95
110
166
189
208
216
Non -Temporal Low
132
154
80
'N6&ihange
90
105
161
184
202
211
"M
16-33 Volts
10,
(135-485 cd)
16-33 Volts
DC Input
135
150
177
185
FWR Input
135 150
177
185
Temporal High
245
259
290
297
Temporal High
215 231
258
265
Temporal Medium
235
253
288
297
Temporal Medium
209 224
250
258
Temporal Low
232
251
282
292
Temporal Low
207 221
248
256
Non -Temporal High
255
270
303
309
Non -Temporal High
233 248
275
281
Non -Temporal Medium
242
259
293
299
Non -Temporal Medium
219 232
262
267
Non -Temporal Low
238
254
291
295
Non -Temporal Low
214 229
256
262
Candela Derating
Horn Tones
and Sound Output Data
For K series products used
at low temperatures, listed
candela ratings must be reduced in accordance with
8-175
16-33
24-Volt Nominal
this table.
Switch
Sound
Volts
Volts
Reverberant
Anechoic
Position
Pattern dB DC FWR DC FWR
DC FWR
DC FWR
Listed Candela
Candela rating at -40"F
is
Do not �ise 5elDvv 32'F
15/75
30
75
44
95
70
110
110
115
115
135
135
150
150
177
177
185
185
I
Temporal
High
78
78
84
84
88
88
99
98
P
Temporal
Medium
74
74
80
80
86
86
96
96
3
Temporal
Low
71
73
76
76
83
80
94
89
4
Non-
Temporal
High
82
82
88
88
93
92
100
100
5
Non-
Medium
78
78
85
85
90
90
98
98
Temporal
6
Non-
Temporal
Low
75
75
81
81
88
84
96
92
71
Coded
High
82
82
88
88
93
92
101
101
8t
Coded
Medium
78
78
85
85
90
90
97
98
91 Coded Low 75 75 81 81 88 85 96 92
tSettings 7, 8, and 9 are not available on 2-wire horn strobe. AVOS'i20i
SpectrAlert Advance Diagrams
4 2.5"-P
Wall -Mount Horn Strobes
I NEW
LINIM
erproof Back Box
Wall -Mount Horn Strobe with Plastic Weatherproof Back Box
SpectrAlert Advance Ordering Information
14&0�
Wall Horn Strobes
P2RK*t
2-Wire Horn Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
P2RHK*1
2-Wire Horn Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box)
P2WK*i
2-Wire Horn Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
P2WHK*t
2-Wire Horn Strobe, High cd, White, Outdoor (includes plastic weatherproof back box)
P4RK1
4-Wire Horn Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
P4WK
4-Wire Horn Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
P2RHK-1 20
2-Wre Horn Strobe, High cd, Red, Outdoor, 120 V (includes plastic weatherproof back box)
Wall Strobes
SRK*t
Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
SRHK*1
Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box)
SWK*i
Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
SWHK*1
Strobe, High cd, White, Outdoor (includes plastic weatherproof back box)
Horns
HRKi
Horn, Red, Outdoor (includes plastic weatherproof back box)
Accessories
SA-WBB
Red, Metal Weatherproof Back Box
SA-WBBW
White, Metal Weatherproof Back Box
Notes:
Add "-P" to model number for plain housing (no "FIRE:: marking on cover), e.g., P2RK-P_
Add -R" to rnodel number for weatherproof replacement device (no back box included), only for use with weatherorool outdoor flush �ounting plate, VVTP and WTPW.
Standard cd" refers to strobes that �nclude 15, 15/75, 30, 75, 95, 110. and 115 candela settings- "High cd-refers to sirobesshat include -35 150. 177, and 185
candela settings. When replacing standard outdoor units both the device and back box must be replaced.
C2 - -
1 � SYS;— S-0,
SYSTrurw :c d F.-ge �r -s ric;.Cf. kl.�; sysIann,e,no,cc�
3825 Ohio Avenue - St. Charles. IL 60174 P
Phone: 800-SENSOR2 - Fax: 630-377-6495
Symbol Legend
SYMBOLI
DESCRIPTION
MANUFACTURER
PART NUMBER
MODEL
QUANTITY
USER TEXT
UL
FM
R&XCT
INTELLINET 2.0 FIRE SUBSCRIBER 8 ZONE, 7794A, LOCAL ANNUM. NOT, RED
ASS CORP
77OTP464JLP-M
7707P.Ba-ULP-M
1
Listed
FF-AC-P-1
INTELLIGENT, FACP, 4 PROGRAMMABLE OUTPUTS
FARENHYT
IFP-100
IFP-100
I
Listed
F-7jus
REMOTE LCD ANNUNCIATOR, RED
FARENHYT
RA-100OR
I-GOOR
I
Listed
Approved
SMOKE, PHOTOELECTRIC. ADDRESSABLE
FARENHYT
IDP4-HOT0
IDP-PKOTO
3
Listed
135 -F (67' C) DUAL CIRCUIT FIXED TEMPERATURE
SYSTEM SENSOR
5823
5623
1
S2101
Approved
FULL STATION, DOUBLE ACTION, ADI)RES.ABLE
FARENHYT
I.P4-U.
IDP-PULL.
I
Lt..
INTERFACE MODULE. ADDRESSABLE
FARENHYT
IDP-MONITOR
IDP-MONITOR
5
Listed
RELAY MODULE, ADDRESSABLE
FARENHYT
IDP-RELAY
IDP-RELAY
3
Listed
INTERFACE MODULE, MINI, ADDRESSABLE
PARENHYT
IDP.MINIMON
IDP-MINIMON
1
Approved
Approved
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING
SYSTEM SENSOR
PC2RL
PC2RL
6
L-SERIES STROBE, 2 WIRE, M-C, RED, CEILING
SYSTEM SENSOR
SCRIL
SCRIL
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING
SYSTEM SENSOR
PC2RL
PC2RL
1
L-SERIES STROBE, RED, WALL
SYSTEM SENSOR
SFIL
SRL
3
L-SERIES STROBE, RED, WALL
SYSTEM SENSOR
SRL
SRL
1
L-SERIES 2-WIRE, HORN STROBE, RED, WALL
SYSTEM SENSOR
P2RL
P2RIL
6
L-SERIES 2-WIRE, HORN STROBE, RED, WALL
SYSTEM SENSOR
P2RL
P2RL
2
LZERIES 2-WIRE, HORN STROBE, RED, WALL
SYSTEM SENSOR
P2RL
P2RL
5
STROBE, 2 WIRE, M-C, RED, WALL, WP
SYSTEM SENSOR
SRK
SRK
I
S3693
3023672
24V, 10" BELL
SYSTEM SENSOR
SSM24-10
SSM24-10
1
S4011
3005255
L-SERIES STROBE, RED, WALL
SYSTEM SENSOR
SRL
SRL
I
n
SOL 4.7K
FARENHYT
EOL-4.7
SOL-4.7
4
Circuit Calculations Panel: PI Card: 00 CIrcuIt:SBP1
Circuit Name: SBP1
Circuit Too: Poeer1SBUS RS-485 Terminal Voltage: 20.2V.,DC Amperage: 1.00011A
Cable: 1812C SOLTWISTED SHIELDED FPLP#18
Calculations based on Running Total Length.
Design Criteria: Ambient temperature: 167'F Max. operating voltage drop: 10%
Device
Part No
4pliance owe
Distance
Current
Voltage
Voltage Drop
IFP-100
Panel
20.2V
1
7
RAAOOOR
REMOTE LCD ANNU R, RED
383-0
20.0000.A
20.0181V
(0.119,J)
38F-0�20.000OMA
Total Current: 20.00OOmA
(Total VDrop Pement:0.59%) Total Voltage Drop: 0.119V
Circuit Calculations Panel: P1 Card: 00 Circult:SBC1
Circuit Name: SBC1
Sedal/SBUS RS-485 TenninalValtage:42VOC Ampemge:l.00DQA
Cable: 14/2 SOLJKT FPLR IM RL RED #14
Calculations based on Running Total Length.
Design Criteria: Ambient temperature: 167T Max. operating voltage drop: 10%
�De��
Appliance Dew
Distance
C
)top
I IFP-1001
PrI.I_
I IIRA-100DRI
REMOTE LCD ANNU
..........
11-ses
ME
11108
III III
Sig
WE
Battery Calculations for Panel: FIT
Part No:IFP-100 - INTELLIGENT, FACP, 4 PROGRAMMABLE OUTPUTS
Job number: 817-WM Job murna: 2213D HWY 99
Address 1: EDMONDS, WA 98026
Pho a: 253-833-1248 Fax:
Designing engineer., MATTCARLMAN
Job Site: DOUG'S MAZADA
Authority having jurisdiction: CITY OF EDMONDS
Part No.
g!�.
Description
Standby
Total Standby
Alarm ,
Total Alarm
Parel Equipment
IFPIOOLMB
I
IFP-100 INTELLIGENT MAIN BOARD
170.0000ink
170.0000MA
325.00ODmA
325.0000TA
Total Pawl Stby
17O.0000mA
Total Panel Alarm
325.00001
Peripheral Devices
PC2RL
6
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING (Notificatim)
O.00DOMA
0.00OOmA
163.00DOmA
978.0066WA
SCRL
1
L-SERIES STROBE, 2 WIRE, M-C. RED, CEILING (Notification)
O.00DOMA
0.0000.A
411.0000MA
41.0000.A
P02RL
1
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING (Notification)
0.66mm
DOODOmA
94.ODDOmA
94.00DOmA
SR
3
L-SERIES STROBE, RED, WALL (Notification)
O.00OOmA
O.ODDOmA
43.ODOOmA
129.ODOO.A
P2R
L-SERIES 2-WIRE, HORN STROBE, RED, WALL (Notification)
O.00DOMA
O.00OOrnA
53.0000MA
1OS.ODOOmA
P2RL
6
L-SERIES 2-WIRE, HORN STROBE, RED, WALL (Notification)
O.00ODMA
OL0OOOmA
119.ODOOmA
714.00ODmA
P2RL
5
L-SERIES 2-WIRE, HORN STROBE, RED, WALL (Nollficaflon)
D.00ODmA
O.00OOMA
140.0000.A
7OD.00OOmA
SRL
1
L-SERIES STROBE, RED, WALL (Notificafion)
COMMA
O.0000mA
107.00OOMA
107.0000mA
SRL
1
L-SERIES STROBE, RED, WALL (N.t,ficatior)
0.0000.A
O.ODOOmA
63.00OOrnA
63.00OOmA
SRK
1
STROBE, 2 WIRE, M-C, RED, WALL, WP (Nolflorfien)
O.00OOMA
O.00DOMA
210.00OOMA
21O.00OOmA
SSM24-110,
1
24V, 1OP BELL (Notification)
O.00OOmA
O.ODOOmA
R0OOOmAl
31.000OMA
RA-100OR
1
REMOTE LCD ANNUNCIAMR, RED (Po%ver)
20.00OOmA
2O.00OOmA
25.0000muk
25.0000mAl
RA-100OR
I
REMOTE LCD ANNUNCIATOR, RED (Sedal)
0.10MMA
0.10OOmA
0.1000mA
0.1000
IDP-PHOT0
3
SMOKE, PHOTOELECTRIC, ADDRESSABLE (Signaling line)
O.3OOOmA
O.9D0OmA
C30OOmA
O.9O0OmA.
IDP.PULL.DA
I
PULL STATION, DOUBLE ACTION, ADDRESSNBLE (Signaling line)
0.35DDmA
O.35OOmA
O.350CmA
O.35OOmA
IDP-MONITOR
5
INTERFACE MODULE, ADDRESSABLE (Signaling line)
2.5000MA
12.5DOOmA
2.2500MA
11.25DO.A
IDP-RELAY
RELAY MODULE, ADDRESSABLE (Signaling the)
0.26DDmA
OL7SOOmA
O.O26OmA
O.O78OmA
IDP-MINIMON
_3
I
INTERFACE MODULE, MINI, ADDRESSABLE (Signaling line)
0,37SOMA
0.375OmA
0.60OOmA
O.6ODDmA
56231
1.
135 *F (57* C) DUAL CIRCUIT FIXED TEMPERATURE (Initialing)
0 OODOMA
0.ODOO.A
O.00DOmA
0.0000mA
Total Peripheral Stby
35.0050.A
Trial Pariph Alan
3211.278OmA
I
ToWStandbyAmpsl
205.005OmA
Total Alamn Amp.
3536.2780;A
Standby time: 24 Hrs 4.92Ah
Alarm time: 5 Min 0.295Ah
Battery requirement: 5.215Ah
Coinpensation Factors - Standby., 1.2 Alarm: 1.2 Requirement with compensation: &258Ah
Circuit Calculations Panel: P1 Card: 00 Circuit:SLC2
Circuit Nam: SUC2
Circuit Type: Signaling lineADP - SLC 1bnmwiVoVg.:2O2V.DC Arnpe.ge:1.01300A
Cable: 18/2 SOL JKT FPUR 1M RL RED #18
Calculations based on Running Total Length.
Design Crihala: Amblenttemperature: 1679F Max.operatin9vollagedrop:10%
Devioe
Part No
Appliance Deso
Distance
CUrrerA
lVoltage
Voltage Drop
IFP-100
Panel
I 20.2V
SA
IDP-PHOTO
SMOKE, PHOTOELECTRIC, ADDRESSABLE
R-0
0.3000.A
20.1MV
(OrOODSV)
MA
IDP-PULL-FA
PULL STATION, DOUBLE ACTION, ADDRESSABLE
T-0
O.35OO.A
20.197W
(0.0016V)
M:2
IDP-MONI`10�
INTERFACE MODULE, DRESSABLE
U-0
2.5OOOmA
20.1964V
(0.0011N,)
M.3
IDP-MONTOR
INTERFACE MODULE, ADDRESSABLE
2.5OOOmA
20.196V
(0JDOO4V)
WE
IDP-RELAY
RELAY MODULE, ADDRESSABLE
126-0
0.2600MA
20.1825V
(0.0132V)
M:61
IDP-RELAY,
RELAY MODULE, ADDRESSABLE
X-0
O.26DOmA
20.1823V
(0.0002V).
M'.7
� IDP-RELAY
RELAY MODULE, ADDRESSABLE
7-0
0.2600MA
20.1821V
(0-OOW
=
M:8
IOP-MINIMON
INTERFACE MODULE, MINI, ADDRESSABLE
N-0
0.375OmA
20.1817V
(0.
IDP-PHOTO
SMOKE, PHOTOELECTRIC, ADDRESSABLE
1&-0
0.3000MA
20.1809V
(OOOW
S:3
iDP-PHoTo
smakE, PHOTOELECTRIC, ADD RESSABLE
W-0
0.30DDMA
20A74V
(0.ODS8V)
FS:2
M:91DP-MONITOR
INTERFACE MODULE, ADDRESSABLE
44T-0
2.50OOmA
20.1396V
(0.6i4T�_
M:10[DP-MONITOR
INTERFACE MODULE, ADDRESSABLE
24'-0
2.5000
20.1387V
(O.00W
7
14.9050.&
Total Cument: 14.9050nuk
(total VDrop Percent:0.30%) Total Voltage DroV. 0.0613V
rej 4 1 1!!111!11!11!
L
111ii"FERTE, X N41111
I - 1, 0 Z i
1. SYSTEM WRING NOTED ON THE DRAWINGS IS PER MANUFACTURE AND CODE
REQUIREMENTS. ANY ALTERATION TO SYSTEM WIRING, WITHOUT APPROVAL, IS
AT ELECTRICAL CONTRACTOWS OWN RISKII
2. SYSTEM WIRING SHOWN ON DRAWNGS IS DIAGRAMMATIC AND ONLY USED
FOR REFERENCE PURPOSES. ACTUAL WIRE AND DEVICE INSULATION MAY
VARY DUE TO OBSTRUCTIONS.
3. WIRE SHOWN IN THIS DRAWING SET IS PERMITTED IN RACEWAYS LEADING TO
FIRE PROTECTION EQUIPMENT. OTHER WIRE SHALL NOT BE PERMITTED IN THE
SAME RACEWAY.
4. FIRE ALARM SYSTEM INSTALLATION SHALL CONFORM WITH THE LATEST U.L.,
N.E.C., N.F.P.A., W.A.C., AND OTHER STANDARDS AS APPLICABLE TO THE CITY
STANDARDS.
5. WHEN NECESSARY, DUE TO CHANGING DESIGN REQUIREMENTS, FACTORY
AVAILABILITY, ETC. FIRE SYSTEMS WEST RESERVES THE RIGHT TO SUBSTITUTE
EQUIPMENT HEREIN MENTIONED OR SPECIFIED, WITH EQUIPMENT OF EQUAL OR
BETTER QUALITY, FUNCTION AND DESIGN.
6. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ALL NOTIFICATION
APPLIANCE CIRCUITS SHALL NOT BE PERMITTED.
7. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ANALOG INITIATING DEVICE
CIRCUITS IS PERMISSIBLE.
8. THIS SPACE IS EQUIPPED WITH AN AUTOMATIC FIRE SPRINKLER SYSTEM.
9. FIRE SYSTEMS WEST WILL BE INSTALLING A NEW FIRE ALARM SYSTEM FOR A
NEW CONSTRUCTION.
10. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM NOTIFICATION
DEVICES FOR NEW TENANT LAYOUT.
11. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM INITIATING
DEVICES FOR NEW TENANT IMPROVEMENT.
12. FIRE SYSTEMS WEST WILL BE PROVIDING RELAY AND SMOKE DETECTORS
FOR ELEVATOR RECALL.
FIRE ALARM SY:TEM INFORMATION
INSTALL PJSUPFUER
SITE CONTACT:
DOUG'S MAZADA
DESIGNISUPPLIER:
FIRE SYSTEMS WEST, INC.
22130 HWY99
_56 FRONTAGE ROAD NORTH. STE
EDMOND%WA98026
PACIFIC, WASHINGTON
98047
PHONE:
PHONE: (253)M1248
FAk.
FAX: (253) 735-0113
1WASTUCENSE: FIRESIM1401BI
WAST LICENSE:
FIRESVW1055LW
MATT CARUMAN
FIRE SYSTEMS WEST, INC
WS FRONTAGE ROAD NORTH, STE-C
"NICET
III Fire At
PACIRC, WASHINGTON 98047
D
PHONE: (253) 833-1248
APPR
FAX: (253) 113
F1 E
24 OCT 20 8
3,01iffimt-fc-pt"
Fi. N..
x
N sles
A16
�uo
.5'Ub&4T-
I NICET LEVEL 11146053
CITY OF EDMONDS.
A
BUILDING DEPARTMENT
a 1OWPPS
EX EXmNG OCATION
WORK vi t2a ALPQP_rn
(SWO FORNMOMM)
MAnIERPROOF
ADDRESS --a 1-;r)
N NMUMCE
R MLOCATE
-KCH "'MUE MEA B-1. DEFINED AS
OWNE
5E
10-LoIn -A-1. .c...T.
APPROVED DATE:
BLDG. OFFICIAL:
PERMIT NUMBER
slj�olokg 1qj4
WORK AREA
SWL FIRktOPY
B.ifi,
Q
�221 VN�111111 11
V;,V
ri
VICINITY MAP
N
SCALE: N.T.S.
A"
2
7
0 :r
C/)
P 1�
X=C)
O,Z
C_)_0
LC ul rz
z
0
U1
0 co 0 4
c6
Lu
0
6
0
C3
OF
se
GENERAL NOTES I SCOPE OF WORK
Circuit Calculations Panel: P1 Card: 00 CIrcuft:SIG1
Circuit Name: SIGN
Circuit Type: Notification Terminal Voltage: 2O.4V'.DC Amperage: 3.0000A
Cable: 1412 SOLJI(rFPLR 1M RL RED #14
Calculations based on Running Total Length.
Design Criteria: Ambient temperature: 1670F Nim operating voltage drop: 10%
Device
Part Nol
Appliance Dese
Distance
Current I
Voltage
Voltage Drop I
IFP-1001
Panel
20AV
1�
P02RLI
L-SERI 2-WIRE, HORN STROBE, RED, CEILING. MOD
3Z-O
163 ODOO.A
20 2078V
(0 11922V)
2
PC2RLI
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING, 96CD
44'-0
163.00OOmA
19.SB77V
(0.2202V)
3
PC2RIL
LSERII S 2-WIRE, HORN STROBE, RED, CEILING, 95CD
"'-0
163.0000.A
19.91IL/
(0.117alVl
4
PC2RLj
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING, 95CD
46'-0
163.00OOMA
19,6734V
(O.Miv)
6
PC2RLj
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING, 95CD
31V-0
OOOO.A
TS 605,3V
(0 0681V)
PC2RLj
L-SERIES 2-WIRE, HORN STROBE, RED, CEILING, 95CD
31V-O
JS3.00DOmA
19.5713V
(0,034V)
23,V-01978.00OOMA
Total Current: 978.00OGMA
(Total VDmp Pencent:4.013%) Total Voltage Drop: 0.8287V
Circuit Calculations Panel: P1 Card: 00 Circuit:SIG2
Circuit Nam: SIG2
CircuatTipe:Nofification Terminal Voltage: 20.4V.DC Amperage:3.0000A
CsbI&:14/2SOLJKrFPLR1MRLRED #14
Calculations based on Running Total Length.
Design Criteria: Amblerittemperature: 167aF Matt. operaling voltage drop: 10%
Device
Part Nol
Appliance Dese -
Distance
current
IVoltage
Voltage Drop
IFL1�0[01
tin -I
20AV
I
P2
L-SERIES 2-WIRE, HORN STROBE, RED, WALL, 95CD
_8T-O
1,10.0DOOMA119.13MV
(05nM
2
RL
L-SERIES 2-WIRE, HORN STROBE, RED, WALL, 75CD
60.0
119.00OOmAj19.4871V
3
P2RL
L-SERIES 2-WIRE. HORN STROBE, RED, WALL. 75CD
37-0
_L19.ODOOmA
19.3168V
(0
4
SRLJ
L-SERIES STROBE, RED, WALL, 15CD
j'-O
43.00OO.A
19.3122V
(00046V)
5
RL
L-SERIES 2-WIR , HORN STROBE, RED, WALL. =0
2V-0
140.00OOmA
19.2126V
(0.0996v)
6
P2RL
L-SERIES 2-WIRE. HORN STROBE. RED, WALL, 150D
26-0
53.00OO.A
19.1259V
(0-086M
7
P2RLj
L-SERIES 2-WIRE, HORN STROBE, RED, WALL, 75CD
21'-0
119.00ODMA
119.0599V
(0.066V)
8
P2RLj
L-SERIES 2-WIRE, HORN STROBE. RED. WALL, 75CD
JT-O
119.DOOOmA
19.0189VI
(0.041V)
9
P2RL
L-SERIES 2-W RE, HORN STROBE, RED, WALL, 15CD
11'-0
53.00OOmA
19.0004VI
(O.O185Vi
10
SRL
L-SERIES STRO E, RED, WALL, 15CD
1(Y-O
43 ODOOMA
18.9868V
( ' 136V)
11
SRL
L-SERIES STROBE, RED, WALL, 15CD
43.0000.A
18.966V
_(0.020M
12
SCRL
L-SERIES STROBE, 2 WIRE, M-C, RED, CEILING, 15CD
28'-0
41.00OOmA
18.9428V
(0.0232V)
13
PC2RL
L-SERIES2-WIRE, HORN STROBE, RED, CEILING, 30CD
1Z-O
94-0000-A
18-9359V
(0-0069V)
1 339-0
1126.CDOOMA
Total Current, 1126.
(Total VDrop Pa-rd.7.18%) Total Voltage Drop:
i 1 1 1 'e i I i i
95CO 95CD 95CD 95CO 95CD 195CD
Circuit Calculations Panel: P1 Card: 00 Circult:SIG3
Circuit Name: SIG3
Circuit Type: Notification Terminal Voltage: 20.4V.,DC Amperage: 3.0000A
C�bI.:14r2SOLJI(TFPLR1MRLRED #14
Calculations based on Running Total Length.
Design Criteria: Ambient temperature: 167OF Mrat.operallrovoltagedrop:10%
DevicelPart
Nol
Appliance Desc,
Distance
nce,
Current
Voltage
Voltage Drop
I IFP-1001
Panel
20.4V
1
P2RL
L-SERIES 2-WIRE, HORN STROBE, RED, WALL, 95CD
11(Y-O
140.0000.A
19.
(0.5592VI
2
P2RI-
L-SERIES 2-WIRE, HORN STROBE, RED, WALL, 95CD
W-0
14O.00OOmA
19.5958V
(0.245V)
3
P2RL
L-SERIES 2-WIRE, HORN STROBE, RED, WALL.95CD
3r-O
P2W-OI82S.00WmAj
140.00DOmA
19.4713V
(0.1245V)
4
P2RL
L-SERES 2-WIRE, HORN STROBE, RED, WALL, 75CP
36-0
119.ODDO.A
19.3836V
(0.0877V)
5
SRL
L-SERIES STROBE, RED, WALL, 30CD
ir-o
63.0000
19.
(D O3OZV)
6
SRL
L-SERIES STROBE, RED, WALL, 75CD
20`-0
107.00DOmA
19.3257V
(0 027M
7
P2RL
L-SERIES 2-WIRE, HORN STROBE, RED, WALL, 750D
T4J
T-0
119CO.O.
119-0000MAII
(0,0051v)
.4
Total Cum int: 82S.00OOmA
(Total VDrop Percent.5.29%) Total Voltag � Drop: 1.0794V
Circuit Calculations Panel: P1 Card: 00 Circuit:SIG4
Cirouft Name: SIG4
Circuit Type: Notification Terminal Voltage: 20.4V;DC Amperage: 3cOOQA
Cable: 14/2SOLJKTFPLR 1M RLRED #14
Calculations based on Running Total Length.
Design Criteria: Ambient temperature: 167OF Mao.operallngwilagedrop:110%
Device
Part No
Appliance Desc
Distanoel
Current
I Vottage
Voltage Drop,
IFP101)�
Panel
'4V
1, WALL, VvP, 115CD
9-01210.00OOMA!20.3867V
(0.0133%0
0.3833V
(0.0004V)
11--01241.000O.Al
Total Current: 241.00ODmA
CIbtWVDropP=erd:O.O7%) Total Voltage Drop: 0.0137V
120V
.20AMP
WIRING DIAGRAM
/ f / /
1. SYSTEM WIRING NOTED ON THE DRAWINGS IS PER MANUFACTURE AND CODE
REQUIREMENTS. ANY ALTERATION TO SYSTEM WIRING, WITHOUT APPROVAL, Is
AT ELECTRICAL CONTRACTOR'S OWN RISKI I
2. SYSTEM WIRING SHOWN ON DRAWINGS IS DIAGRAMMATIC AND ONLY USED
FOR REFERENCE PURPOSES. ACTUAL WIRE AND DEVICE INSULATION MAY
VARY DUE TO OBSTRUCTIONS.
3. WIRE SHOWN IN THIS DRAWING SET IS PERMITTED IN RACEWAYS LEADING TO
FIRE PROTECTION EQUIPMENT. OTHER WIRE SHALL NOT BE PERMITTED IN THE
SAME RACEWAY.
4. FIRE ALARM SYSTEM INSTALLATION SHALL CONFORM WITH THE LATEST U.L.,
N.E.C., N.F.P.A., W.A.C., AND OTHER STANDARDS AS APPLICABLE TO THE CITY
STANDARDS.
5. WHEN NECESSARY, DUE TO CHANGING DESIGN REQUIREMENTS, FACTORY
AVAILABILITY, ETC. FIRE SYSTEMS WEST RESERVES THE RIGHT TO SUBSTITUTE
EQUIPMENT HEREIN MENTIONED OR SPECIFIED, WITH EQUIPMENT OF EQUAL OR
BETTER QUALITY, FUNCTION AND DESIGN.
6. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ALL NOTIFICATION
APPLIANCE CIRCUITS SHALL NOT BE PERMITTED.
7. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ANALOG INITIATING DEVICE
CIRCUITS IS PERMISSIBLE.
B. THIS SPACE IS EQUIPPED WITH AN AUTOMATIC FIRE SPRINKLER SYSTEM.
9. FIRE SYSTEMS WEST WILL BE INSTALLING A NEW FIRE ALARM SYSTEM FOR A
NEW CONSTRUCTION.
10. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM NOTIFICATION
DEVICES FOR NEW TENANT LAYOUT.
11. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM INITIATING
DEVICES FOR NEW TENANT IMPROVEMENT.
12. FIRE SYSTEMS WEST WILL BE PROVIDING RELAY AND SMOKE DETECTORS
FOR ELEVATOR RECALL.
FIRE ALARM SYSTEM INFORMATION
INSTALLERISUPPLIER
SITE CONTACT:
DOUG'S MA7ADA
DESI-- - UPPLIER:
FIRE SYSTEMS WEST, INC.
22130 HWY 99
206 FRONTAGE ROAD NO9rR. STE
EDMONDS. WA 98026
PACIFIC, WASHINGTON
98047
PHONE:
PHONE: (253) 833-1248
FAX:
FAX: (253) 735-01113
WASTLICENSE'. FIRES11111140181
WASTLICENSE:
FIRESVW1055LW
FIRE SYSTEMS WEST, 5FC Lw III Fire nos
.06 FRONTAGE ROAD NORTH. 8 E C
004
PHONE: (2p M1248
FAX: (253) 735-0113 - - 24 OCT 2018
- Certficate of Compete
F! I Alarm �1',,'Ign
x No.: 99709
'j
NICET LEVEL 11146053
A
a FFPPLP
1Y
EX EMSMNGLOCAn
(�W. "' NMDEWCE)
W WEATHERPR F
N NM De"'
R MLOCATE
-51-- MEM-LUEUEHNEVAS
CXHVT
. 20 CIL-T. 3--K
A.- M"M-11
WORK AREA
-1h S, �w
220t h St SW
Hrrd�
N
Hllbl� T11t,
�2213(1 1�
VICINITY MAP
N
SCALE: N.T.S.
9
GENERAL NOTES If SCOPE OF WORK
1. SYSTEM WIRING NOTED ON THE DRAWINGS IS PER MANUFACTURE AND CODE
REQUIREMENTS. ANY ALTERATION TO SYSTEM WIRING, WITHOUT APPROVAL, IS
AT ELECTRICAL CONTRACTOR'S OWN RISKII
2. SYSTEM WIRING SHOWN ON DRAWINGS IS DIAGRAMMATIC AND ONLY USED
FOR REFERENCE PURPOSES. ACTUAL WIRE AND DEVICE INSULATION MAY
VARY DUE TO OBSTRUCTIONS.
3. WIRE SHOWN IN THIS DRAWING SET IS PERMITTED IN RACEWAYS LEADING TO
FIRE PROTECTION EQUIPMENT. OTHER WIRE SHALL NOT BE PERMITTED IN THE
SAME RACEWAY.
4. FIRE ALARM SYSTEM INSTALLATION SHALL CONFORM WITH THE LATEST U.L.,
N.E.C., N.F.P.A., WA.C., AND OTHER STANDARDS AS APPLICABLE TO THE CITY
STANDARDS.
5. WHEN NECESSARY, DUE TO CHANGING DESIGN REQUIREMENTS, FACTORY
AVAILABILITY, ETC. FIRE SYSTEMS WEST RESERVES THE RIGHT TO SUBSTITUTE
EQUIPMENT HEREIN MENTIONED OR SPECIFIED, WITH EQUIPMENT OF EQUAL OR
BETTER QUALITY, FUNCTION AND DESIGN.
6. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ALL NOTIFICATION
APPLIANCE CIRCUITS SHALL NOT BE PERMITTED.
7. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ANALOG INITIATING DEVICE
CIRCUITS IS PERMISSIBLE.
8. THIS SPACE IS EQUIPPED WITH AN AUTOMATIC FIRE SPRINKLER SYSTEM.
9. FIRE SYSTEMS WEST WILL BE INSTALLING A NEW FIRE ALARM SYSTEM FOR A
NEW CONSTRUCTION.
10. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM NOTIFICATION
DEVICES FOR NEW TENANT LAYOUT.
11. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM INITIATING
DEVICES FOR NEW TENANT IMPROVEMENT.
12. FIRE SYSTEMS WEST WILL BE PROVIDING RELAY AND SMOKE DETECTORS
FOR ELEVATOR RECALL.
FIRE ALARM SYSTEM INFORMATION
INSTALLERISUPPLIER
SITE CONTACT:
DOUG'$ MAZADA
DESIGN($ PPLIER:
FIRE SYSTEMS WEST, INC.
22130 HWY 99 _
FRONTAGE ROAD NORTH. STE
EDIVIONK WA 98026
PACIFIC, WASHINGTON
98047
PHONE:
PHONE: (253) 833-1248
FAX: (253) 735-0113
WASTLICENSE: FIRESM140BI
WA ST LICENSE:
FIRFSVAOSSLW
DESIGNER
NIATTCARLMIAN
FIRE SYSTEMS WEST, INC
206 FRONTAGE ROAD NORTH, STE C
PACIFIC, WASHINGTON 98047 L_ 11 Jll 1 _R6m MJ a m�
PHONE: (253) 833-1248 i��
FAX: (253) 7364113
24 OCI 2018
x C.Mi—a of C—peten
Fim Al- Desig,
E.0-1-1
N., 99709
NICET LEVEL 11146063
A jlrFPLl
B 0 PLP
I, MISTING CATION
(SWM FORNMOMCE)
W MATHERPR F
N MW DM'
R MLOCATE
-STROM COWMM AMASKALL M D RNEDAS
le n.CW HT 20MMAK .C..w.
w
WORK AREA
DOUG'S MAZADA LOWER LEVEL FIRE ALARM PLAN All%,
=m2ml -�� UN
zo,
GENERAL NOTES I SCOPE OF WORK
DOUG'S MAZADA UPPER LEVEL FIRE ALARM PLAN
20'
SCkE':'118q=l%" "'
1. SYSTEM WIRING NOTED ON THE DRAWINGS IS PER MANUFACTURE AND CODE
REQUIREMENTS. ANY ALTERATION TO SYSTEM WRING, WITHOUT APPROVAL, IS
AT ELECTRICAL CONTRACTOR'S OWN RISKII
2. SYSTEM WIRING SHOWN ON DRAWINGS IS DIAGRAMMATIC AND ONLY USED
FOR REFERENCE PURPOSES. ACTUAL WIRE AND DEVICE INSULATION MAY
VARY DUE TO OBSTRUCTIONS.
3. WIRE SHOWN IN THIS DRAWING SET IS PERMITTED IN RACEWAYS LEADING TO
FIRE PROTECTION EQUIPMENT. OTHER WIRE SHALL NOT BE PERMITTED IN THE
SAME RACEWAY.
4. FIRE ALARM SYSTEM INSTALLATION SHALL CONFORM NTH THE LATEST Ul.,
N.E.C., N.F.P.A., W.A.C., AND OTHER STANDARDS AS APPLICABLE TO THE CITY
STANDARDS.
5. WHEN NECESSARY, DUE TO CHANGING DESIGN REQUIREMENTS, FACTORY
AVAILABILITY, ETC. FIRE SYSTEMS WEST RESERVES THE RIGHT TO SUBSTITUTE
EQUIPMENT HEREIN MENTIONED OR SPECIFIED, WITH EQUIPMENT OF EQUAL OR
BETTER QUALITY, FUNCTION AND DESIGN.
6. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ALL NOTIFICATION
APPLIANCE CIRCUITS SHALL NOT BE PERMITTED.
7. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ANALOG INITIATING DEVICE
CIRCUITS IS PERMISSIBLE.
8. THIS SPACE IS EQUIPPED WITH AN AUTOMATIC FIRE SPRINKLER SYSTEM.
9. FIRE SYSTEMS WEST WILL BE INSTALLING A NEW FIRE ALARM SYSTEM FOR A
NEW CONSTRUCTION.
10. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM NOTIFICATION
DEVICES FOR NEW TENANT LAYOUT.
11. FIRE SYSTEMS WEST WILL BE INSTALLING NEW FIRE ALARM INITIATING
DEVICES FOR NEW TENANT IMPROVEMENT.
12. FIRE SYSTEMS WEST WILL BE PROVIDING RELAY AND SMOKE DETECTORS
FOR ELEVATOR RECALL.
F—FIRE ALARM SYSTEM INFORMATION
INSTALLERISLIPPLIER
FAX-- (253) 735-0113
EV— 111
x N., 99709
r I W —FPLP
B immis
I, E)CSTINGLWATI N
j9WAPF0RNMDE"CE)
MATHER PRWF
N NMDMM
R RELOCATE
-STROBEMa GE EASHaLMEDEFINED
2—
FIRE ALARM PLAN WORK AREA
N
Ll
llu— 11, IN T..I�
�22130 V-hi,g�- �9
T�:,,—, Fvr,,�
VICINITY MAP
SCALE: N.T.S.
2N
GENERAL NOTES i SCOPE OF WORK
1. SYSTEM WIRING NOTED ON THE DRAWINGS IS PER MANUFACTURE AND CODE
REQUIREMENTS. ANY ALTERATION TO SYSTEM WIRING, WITHOUT APPROVAL, IS
AT ELECTRICAL CONTRACTOR'S OWN RISKII
2. SYSTEM WIRING SHOWN ON DRAWINGS IS DIAGRAMMATIC AND ONLY USED
FOR REFERENCE PURPOSES. ACTUAL WIRE AND DEVICE INSULATION MAY
VARY DUE TO OBSTRUCTIONS.
3. WIRE SHOWN IN THIS DRAWING SET IS PERMITTED IN RACEWAYS LEADING TO
FIRE PROTECTION EQUIPMENT. OTHER WIRE SHALL NOT BE PERMITTED IN THE
SAME RACEWAY.
4. FIRE ALARM SYSTEM INSTALLATION SHALL CONFORM WITH THE LATEST Ul.,
N.E.C., N.F.P.A., WA.C., AND OTHER STANDARDS AS APPLICABLE TO THE CITY
STANDARDS.
5. WHEN NECESSARY, DUE TO CHANGING DESIGN REQUIREMENTS, FACTORY
AVAILABILITY, ETC. FIRE SYSTEMS WEST RESERVES THE RIGHT TO SUBSTITUTE
EQUIPMENT HEREIN MENTIONED OR SPECIFIED, WITH EQUIPMENT OF EQUAL OR
BETTER QUALITY, FUNCTION AND DESIGN.
6. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ALL NOTIFICATION
APPLIANCE CIRCUITS SHALL NOT BE PERMITTED.
7. PARALLEL BRANCHING (T-TAPPING) OF WIRE TO ANALOG INITIATING DEVICE
CIRCUITS IS PERMISSIBLE.
8. THIS SPACE IS EQUIPPED WITH AN AUTOMATIC FIRE SPRINKLER SYSTEM.
9. DUCT DETECTROS TO BE SUPPLIED AND INSTALLED BY OTHERS.
10. DUCT DETECTORS TO BE POWERED BY RTU UNITS.
11. DUCT DETECTORS TO BE INSTALLED ON RETURN AIR SIDE.
12. FIRE SYSTEMS WEST TO COORDINATE DUCT DETECTOR LOCATIONS WITH
MECHANICAL CONTRACTOR.
13. FIRE SYSTEMS WEST WILL TIE DUCT DETECTORS INTO FIRE ALARM SYSTEM.
I INSTALLERISUPPLIER I
DESIGNER
MATT GARMAN
FIRE SYSTEMS WEST, INC
NO FRONTAGE ROAD NORTH, STE
PAWIC, WASHINGTON
— 24 018
FAX: (253) 735-0113
COffleate of C—peten
Fim AJam D�ig,
No.: 9970
A
a
EX
jCFPLl
,.
NGLOCATI k
Wp
(SW�FORNWDIM�q
'ERPR F
N
NM D�'
R
RELOCATE
SMOBE 00�MGE � SML M DEFINED S
1105".CLG,HT 2017—ff, 30R.—T.
I:,— ---gg
DOUG'S MAZADA ROOF FIRE ALARM PLAN
11046MLAV 20'
Lu
0
z z
=0
0 Ls'
w
A A
9
Lu