The URL can be used to link to this page

REVIEWED BLD2024-1067+Manufacturers Specifications+8.15.2024_8.58.00_AM+4442214RECEIVED BLD2024-1067 Aug 16 2024 CITY OF EDMONDS PLANNING & DEVELOPMENT DEPARTMENT - REVIEWED BY CITY OF EDMONDS Multi -Deck Medium temperature merchandiser for produce. 05DM 1-39 11/16 in [100.7 cmr 3rd ROW LIGHT (OPTIONAL) 24 in 13" MIRROR 'i (OPTIONAL) LIMIT LOA83 51 8 in �0 24 in �� LINE 1212.4 cm] �w 55 3/4 in [141.7 cm] :0 81 9116 in ;� 24 in [207.2 cm] 59 in ;a [149.9 cm] it ;QA24mSTANDARD ;OIr FRONT :O18 [DAIRY 11116 [47.5 in cm] 141/2 inI[36.9cm] 5118 in 6 13116 in [17.2cm]*�.--J [13.1 cm] 31 11116 in [80.2 cm] J 39 114 in [99.7 cm] 43 1/4 in [109.9 cm] Standard Lower Front Panel Design Options (18" shown) Consult Hillphoenix Engineering Reference Manual for other available heights. l4 in/4 m] inl4 [47m] in [47m].5 V/4 inr/4 cm].5 in cm] 02 Standard Front 02 Contour Front C2 Polymer Front C2 Metal Front Flat Front Synerg-E® technology delivers unmatched energy efficiency without compromising the integrity of the perishable products being displayed. Available Options Available lengths: 4', 6', 8', 10', 12'. Multiple front styles available. Multiple front sill heights available. Adjustable wire racks provide display flexibility. Custom Colors, Finishes, and Textures. Available in traditional direct expansion as well as Secondary Coolant versions. Narrow depth version available as ON5DM, taller version available as 05DMH and rear loading version available as 05DR. Exclusive Clearvoyant' LED Lighting System. Standard Cornice Options Consult Hillphoenix Engineering Reference Manual for premium cornice options. 0* +31/4" -118" 00 Op e e 00 CURVED CORNICE CURVED CORNICE FACETED CORNICE WITH NIGHT COVER + 3 1/8" - 718" + 1 3/4" 00 0 00 0 FACETED CORNICE FLAT CORNICE FLAT CORNICE WITH WITH NIGHT COVER WITH STANDARD NIGHT COVER Please consult Hillphoenix Engineering Reference Manual for dimensions, plan views and technical specifications. Specifications subject to change without notice. Designed for optimal performance in store environments where temperature and humidity do not exceed 75°F and 55% R.H. Certified to ILL 471 and ANSI/NSF Standard 7. Features and Benefits Synerg-E Technology with NRGcoiIT" ensures uniform case performance and lower average product temperatures with optimum energy efficiency. Bottom -mounted NRGcoil and lift -up fan plenum for ease of maintenance. Seamless tank liner provides positive drain runoff and enhances sanitation. Standard Off Cycling defrost for cost-effective operation. Removable castors for easy merchandiser unloading, movement and placement. NSF c *ULus COMPONENT Hi//p/`soessix Conyers, GA USA 844.591.5937 hillphoenix.com 02015 Hillphoenix, Inc. DC-M05_05 DM-Prdv0215 "JV11jMft C30 eOT o3ro TM A DOVE- COMPANY r ti_ �4`�4'ig'k�l'�t wr .PP Pz, p hen P 1 1 Pill" c 429 1 1 %T - 05DMONRG 05DMHONRG ON5DM 0 NRG (ALSO INCLUDES ONSDMH-NRG, 05DR-NRG, 05DMM-NRG) SYNER� Clear v^ �DSnt - VI �`/ LYSTEM 3 To ensure proper functionality and optimum performance, it is strongly recommended that Hillphoenix display cases be installed/serviced by qualified technicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-'authorized installation/service contractors, please visit our Web site at www.hillphoenix.com. NSF C oil US P079524G V 1.07 07/26/16 ill REVISION HISTORY DA • •- V1.00 12/23/11 Initial manual release (new format) B. Moody V1.01 07/18/12 Revised page headers B. Moody Moved Electrical Data and Case Dimensions to Appendices B—F Revised Defrost Controls section Added 05DR-NRG case data and dimensional drawings V.1.02 09/26/12 Added case top fascia installation instructions (Appendix N) B. Moody Added peg -hook information (Appendix M) V.1.03 08/13/13 Added glycol notice to Important Notices section B. Moody V.1.04 Updated case top fascia installation instructions (Appendix N) Added electric display module mounting instructions (Appendix Q) V.1.05 03/07/14 Added Clearvoyent and Synerg-e logos to cover page B. Moody Updated page headers Added Parts logo to General Information page Updated Lighting Systems pages Updated Air Quality Control page Added Fresh Thinking/Responsible Solutions logo to back page V.1.06 9/10/14 Added 05DMM-NRG to this manual B. Fountain V.1.07 8/26/16 Updated Clearvoyant logo E. Sibitzky Copyright© 2014 by Hillphoenix All rights reserved. No part of this document may reproduced or transmitted in any form or by any means —electronic or mechanical, including photocopying or recording; or any other information storage and retrieval system —without express written permission from Hillphoenix. IMPORTANT NOTICES iii PRECAUTIONARY NOTICES At Hillphoenix°, the safety of our customers and em- ployees —as well as the ongoing performance of our products —are top priorities. To that end, we designate important information in all Hillphoenix installation and op- erations handbooks with an accompanying alert symbol. All of these notices are meant to provide information about potential dangers to personal health and safety —as well as risks of case damage —if the instructions are not carefully followed. Indicates important information that is crit- ical to proper case performance. Indicates the potential threat of injury if all • instructions are not followed carefully. Indicates an immediate threat of serious injury or death if all in are not fol- lowed carefully. SERVICE NOTICE To ensure optimum case performance, we strongly recom- mended that Hillphoenix display cases be installed and serviced by qualified technicians who have experience working with commercial refrigerated display merchandis- ers and storage cabinets. For a list of Hillphoenix-autho- rized installation and service contractors, please visit our Web site: www.hillphoenix.com LIABILITY NOTICE For Cases with Shelf Lighting Systems Hillphoenix shelf lighting systems —as well as display cas- es with shelf lighting systems —are not designed to with- stand direct or indirect exposure to water or other liquids. The use of a misting system or water hose on a display case with a shelf lighting system, resulting in the direct or indirect exposure of the lighting system to water, can lead to a number of serious issues (including, without limitation, electrical failures, fire, electric shock, and mold) in turn re- sulting in personal injury, death, sickness, and/or serious property damage (including, without limitation, to the dis- play itself, to the location where the display is situated [e.g., store] and to any surrounding property). Do not use misting systems, water hoses or other devices that spray liquids in Hillphoenix display cases with lighted shelves. If a misting system or water hose is installed or used on a display case with a shelf lighting system, then Hillphoenix shall not be subject to any obligations or liabili- ties (whether arising out of breach of contract, warranty, tort [including negligence], strict liability or other theories of law) directly or indirectly resulting from, arising out of or related to such installation or use, including, without limita- tion, any personal injury, death or property damage result- ing from an electrical failure, fire, electric shock, or mold. P079211 M, REVO R-744 (CO2) NOTICE For Systems Utilizing R-744 (CO2) Refrigerant For refrigeration units that utilize R-744 (CO2), pressure re- lief and pressure -regulating relief valves may need to be installed based on the system capacity. The valves need to be located such that no stop valve is positioned between the relief valves and the parts or section of the system be- ing protected. When de -energizing refrigeration units containing R-744 (CO2), venting of the R-744 (CO2) refrigerant may occur through the pressure regulating relief valves. These valves are located on the refrigeration system and not on the case model. If venting does occur, the valve must not be de- feated, capped, or altered by any means. GLYCOL NOTICE For Systems Utilizing Glycol Refrigerant Use of glycol as a secondary refrigerant must be carried out in accordance with the instructions and procedures set forth in the Hillphoenix Second Nature Medium Tempera- ture Secondary Refrigeration Installation Manual, available online for download here: http://goo.gi/JlWd77 Additionally, Hillphoenix uses and recommends Dow gly- col -based coolants, which contain specially formulated industrial inhibitors that help to prevent corrosion in our display cases. Over time, the effectiveness of these in- hibitors deteriorates, increasing the chance for corrosion. We recommend testing of glycol solutions annually through the Dow lab. The service is free for systems containing over 250 gallons of glycol coolants, while the cost is ap- proximately $100 for smaller systems. For more informa- tion, see Dow's DOWFROST and DOWFROST HD Guide, available online for download here: http://goo.gi/v6il iQ Under no circumstance should any com- ponent be replaced or added without consulting Hillphoenix Field Service En- gineering. Utilizing improper components may result in serious injury to persons or damage to the refrigeration system. 2 GENERAL INFORMATION Thank you for choosing Hillphoenix display cases for your food merchandising needs. This handbook contains important technical information and will assist you with the installation and operation of your new display cases. By closely following the instructions, you can expect attractive fit and finish, peak performance, and long case life. We are always interested in your suggestions for improvements to Hillphoenix products and accessories —case design, technical documents, etc. Please feel free to contact our Marketing Services group at the toll -free number listed below. Thank you for choosing Hillphoenix, and we wish you the very best in outstanding food merchandising. CASE MODELS 05DM-NRG, 05DMH-NRG, ON5DM-NRG, ON5DMH- NRG, and 05DR-NRG multi -deck merchandisers. OPERATING DATA & DIMENSIONAL DRAWINGS Operating data and dimensional drawings for the cases listed in this manual can be found in Appendices B—F. STORE CONDITIONS Hillphoenix cases are designed to operate in an air-condi- tioned store that maintains a 75°F (24°C) store tempera- ture and 55% (max) relative humidity (CRMA conditions). Case operation will be adversely affected by exposure to excessively high ambient temperatures and/or humidity. REFRIGERATION SYSTEM OPERATION Air-cooled condensing units require adequate ventilation for efficient performance. Machine -room temperatures must be maintained at a minimum of 65°F in winter and a maximum of 95°F in summer. Minimum condensing tem- peratures should be no less than 70°F. RECEIVING CASES Examine fixtures carefully and in the event of shipping damage and/or shortages, please contact the Service Parts Department at 1-800-283-1109. CASE DAMAGE Claims for obvious damage must be 1) noted on either the freight bill or the express receipt and 2) signed by the car- rier's agent; otherwise, the carrier may refuse the claim. If damage becomes apparent after the equipment is unpacked, retain all packing materials and submit a written request to the carrier for inspection within 14 days of receipt of the equipment. LOST/MISSING ITEMS Hillphoenix equipment is carefully inspected before ship- ping to insure the highest level of quality. Any claim for lost/missing items must be made to Hillphoenix within 48 hours of receipt of the equipment. SERVICE/TECHNICAL SUPPORT For service or technical questions, please contact our Case Division Customer Service Department at 1-800- 283-1109. For questions regarding our refrigeration sys- tems or electrical distribution centers, please contact our Systems Division Customer Service Department at 1-770- 388-0706. PARTS ORDERING If you need to contact Hillphoenix regarding specific fix- tures or parts, please call 1-800-283-1109 and ask for a Service Parts Representative. Provide the following infor- mation about the part you are ordering: • Model number and serial number* of the case for which the part is intended. • Length of the part (if applicable). • Color of part (if painted) or color of polymer part. • Whether part is for left- or right-hand application. • Quantity 'Serial plate is located inside the case on the top -left panel. If the parts are to be returned for credit, ask the Parts Department to furnish you with a Return Material Authorization Number. PUTH ENT/C PA RT S q'tE PE RFORk P` See Appendix A for a detailed parts list and illustration. Hillphoenix 1925 Ruffin Mill Rd. Colonial Heights, VA 23834 Mon. -Fri. (8 a.m. to 5 p.m. EST) Tel: 1-800-283-1109 Fax: 804-526-7450 Web site: www.hillphoenix.com INSTALLATION & TRIM OUT 3 FLOOR PREP 1. Ask the general contractor if your current copy of the building dimensions are the most recently issued. Also, ask for the points of reference from which you should take dimensions to locate the cases. 2. Using chalk lines or a laser transit, mark the floor where the cases are to be located for the entire lineup. The lines should coincide with the outside edges of the case feet. Leveling is necessary to ensure proper case alignment and to avoid potential case damage. Locate the high- est point on the positioning lines as a reference for determining the proper height of the shim -pack level- ers. A laser transit is recommended for precision and requires just one person. 4. Locate basehorse positions along the chalk lines. Spot properly leveled shim packs at each basehorse loca- tion. LINE-UP & INSTALLATION Single Case 1. Roll the case into position, leaving a minimum of 2" be- tween the wall and back of case. Using a "J" bar, raise the end of the case (under cross support), remove the caster assembly (Fig. 1) and lower the basehorse on to the shim packs. Repeat on the other end of the case. 2. Once the basehorse is properly placed on the shim packs, check the vertical plumb of the case by placing Fig. 1 Removing the casters is an easy process. Simply flatten and remove the cotter pins that are holding the casters in place. Then lift the case with a "J" bar and slide the caster assemblies out. The dismantled casters can now be discarded. Be certain that your hands and feet are out of the way before lowering the case after the removal of the casters. Failure to do so may result in serious injury. a bubble level on the shelf standard. Add/remove shim packs as needed. For the horizontal level, repeat this process after placing the bubble level on the front sill. 3. For instructions on sealing the gap between rear -load 05DR cases and the cooler wall, see Appendix R. Multi -Case 1. Remove any shelves (discard the shelf clips) and/or loose items (e.g. shipping braces, mirror assemblies, etc) from the cases that may interfere with case join- ing. Keep all loose items as they will be used later in the installation process. 2. Remove the return air grill at the case joint. The grill lifts out without fasteners and may be easily removed to gain clear access to the case -to -case joining bolts. 3. Follow the single -case installation instructions for the first case, then position the next case in the line-up ap- proximately 3' away. Remove the casters on the end that is closest to the first case. 4. Apply the foam tape gasket (supplied) and a bead of butyl or silicone sealant to the end of the first case (Fig. 2). From the opposite end, push the second case to a position that is approximately 6" from the first case, then remove the remaining casters and position case on the shim packs. = bolt holes - = foam tape gasket O = butyl or silicone sealant NOTE: It is recommended that cases be bolted together in the numbered order indicated in the diagram. 2 4 5 Fig. 2 Bolt holes, foam tape gasket and sealant 4 INSTALLATION & TRIM OUT 5. Loosen the cornice joint at case end (cornice screws are located on top of the case). Be certain that cornice joints and pins are properly aligned. Cases are now ready to be joined. 6. Push the cases tightly together, then lightly bolt them together through the holes that are provided (Fig. 2). Tighten all the joining bolts until all margins are equal. Be careful not to over tighten. 7. Repeat steps 3-6 of this sequence for all remaining cases. Be certain to properly level all cases. 8. See Appendix J for seismic bracket installation in- structions. TRIM OUT 1. To align the master bumpers, slide master bumper joint trim in between adjoining master bumpers. (Fig. 3). 2. Slide the master bumpers left or right to close the seams as required, working outwards from the center of the line-up to the ends. Fig. 3 Master bumpers and joint trim 3. Close the seam where the bumper joins the case end. The bumper joint closes the seam that may develop if the master bumper is moved away from the end to close the case -to -case joint seam. 4. Seal the interior case -to -case joints with caulk (sup- plied), then apply acrylic tape (supplied) over the pipe - chase seam (Fig. 4). The tape acts as a watershed preventing water from settling in the case joint. 5. If mirror assembly and mirror scoop are included, see Appendix K for installation instructions. 6. Re -install shelves (or peg hook assemblies if applica- ble). Be aware that differing shelf configurations will affect energy consumption and case performance. If shelf fillers are included, see Appendix L for installa- tion instructions. If peg hook assemblies are included, see Appendix M for installation instructions. ACRYLIC TAPE Ile AWN Fig. 4 Sealing the pipe chase Fig. 5 Cornice joints 7. Tighten all cornice joints as needed (Fig. 5). Working outward from the center of the line-up, loosen the fas- teners on the top and slide the cornices in one direction so that each joint aligns tightly together. Tighten the fasteners on top and apply an external joint band on the extreme ends of the lineup if a gap exists. 8. Properly align the front panels as needed, then install the front panel trim (supplied). Loosen screws, allowing "J" Rail to drop down to the floor. Retighten screws. FLAT FRONT PANEL "J" RAIL Fig. 6 "J" rail installation INSTALLATION & TRIM OUT 5 9. The "J" rail is shipped attached to the case as shown. for final fit and finish. Be certain to use an appropriate Loosen screws holding "J" rail to allow it to slide down cutting tool (tubing- or PVC -cutter) to ensure a smooth and fit flush with the floor (Fig. 6). Re -tighten screws. cut. 10. If cases are equipped with contour front panels, the 14. If case top fascia is included, see Appendix N for in - upper kickplate retainer is shipped loose in the case. stallation instructions. If an optional AirewaveTm air When installing the upper kickplate retainer, be sure it curtain device is included, see Appendix P for installa- is positioned behind the lip on the front panel. tion instructions for Airewave fascia. 11. Insert top of kickplate into the kickplate retainer. Slide the kickplate up into the retainer, then down onto the "J" rail (Fig. 7). Be certain that the bottom of the kick - plate is fitted over extruding "lip" of the "J" rail. 12. If the case is outfitted with a polymer bumper, insert the nose bumper into the open bumper channel (Fig. 8), up to 96 feet. Hillphoenix recommends leaving an addi- tional 6 inches of nose bumper at the ends to allow for shrinkage during the first 24-48 hours following case start -up —after sufficient time has passed, cut away the excess bumper for final fit and finish. Be certain to use an appropriate cutting tool (tubing- or PVC -cutter) to ensure a smooth cut. 13. If the case is outfitted with a factory -installed, snap -on bumper track, install the snap -on track bumper onto the track, up to 96 feet. For rigid bumper, cut for as tight a fit as possible —to allow for minor shrinkage fol- lowing start -up —and install. For rolled bumper, Hill - phoenix recommends leaving an additional 6 inches of nose bumper at the ends to allow for shrinkage during the first 24-48 hours following case start -up —after suf- ficient time has passed, cut away the excess bumper 15. If electric display modules are included, see Appendix Q for installation instructions. 1. Slide kickplate UP into kickplate retainer recess. 2. Drop the kickplate DOWN onto the "J" rail lip. �, 2 ,�`��♦ KICKPLATE A T i . 4�, Fig. 7 Kickplate installation FRONT ASSEMBLY Fig. 8 Front assembly 6 CONNECTIONS & PIPING Connections are illustrated in dimensional drawings found in Appendices B—F. REFRIGERATION There are 3 refrigeration piping options for this case group: standard, rear, and top. Standard piping penetration is lo- cated beneath the case in the front -right area, fully visible in front of the fan plenum. Rear piping penetration is lo- cated behind the case in the rear -right area, consisting of a pre-cut access punch -out that exposes the foam material that must be penetrated prior to pipe joining (Fig. 9). Rear top -box option consists of piping enclosed in a foam box that exits at the back -right of the case, near the top. Fig. 9 Penetrate foam as needed to access piping If hot gas defrost is used, suction lines to each case in the circuit should be of equal distance from the main suction line. Expansion valve and other controls —located on the left-hand side of the case —are accessed by lifting the two left-hand deck pans (lifting the fan plenum is not required). Before operating the case, be certain to remove the ship- ping blocks that protect the refrigeration lines during ship- ping. If it becomes necessary to penetrate the case tank in any area, be certain to seal any open gaps afterwards with canned -foam sealant and white RTV. PLUMBING The drain outlet is specially molded out of PVC material and is located in the front -center of the case for conve- nient access. The "P" trap, furnished with the case, is constructed of schedule 40 PVC pipe (Fig. 10). Care should be given to ensure that all connections are water- tight and sealed with the appropriate PVC or ABS cement. The drain lines can be run left or right of the tee, with the proper pitch to satisfy local drainage requirements. Since the kickplate is shipped loose with the case, you should have open access to the drain line area during installation. Fig. 10 "P" trap; drain line If the kickplate has been installed, you will find it easy to remove: simply lift the kickplate up from the "T rail and pull the bottom out, away from the case —see Trim Out instructions on pages 4-5. ELECTRICAL Electrical junction boxes are located at the front bottom - left (Fig. 11) or at the rear top -left of the case. Electrical wiring can also be run through the raceway running along the bottom -front of the case. Fig. 11 Junction box beneath case For case -to -case wiring, run conduit between the junction boxes or run wiring through the raceway. When connect- ing to the junction box on the bottom -left side of the case, field wiring should exit box from the right side (furthest away from case wiring) to allow more room inside for wiring connections. For more detailed electrical wiring information, see Appendix G. <Ci> If brazing is necessary, place wet rags around the area to avoid tank damage. PRE -POWER CHECKLIST 7 Before powering -up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and com- pliance with warranty terms. Have you thoroughly examined the case for shipping damage? (see pg • 2) ❑ Have you removed and discarded the casters? (see pg. 3) Have you checked the vertical plumb of the case? The horizontal level? (see pg. 3) Have you applied the foam tape gasket and sealant between adjoining cases? (see pg. 3) Have you sealed the case -to -case joints by applying caulk and acrylic tape to the pipe -chase seam? (see pg. 4) Have you removed the shipping blocks from the refrigeration lines? (see pg. 6) ❑ Have you sealed any tank penetrations? (see pg. 6) ATTENTION! � Be certain to clear the case of any loose packaging or case materials before ener- gizing the case. Failure to do so may re- sult in case damage or malfunction. Be certain that all piping and electrical connections comply with local codes. Installation of 3rd-party materials may result in diminished case performance. 8 LIGHTING SYSTEMS SHOCK HAZARD Always disconnect power to case when servicing or cleaning. Failure to do so may result in serious injury or death. Hillphoenix cases may be equipped with either T-8 lights or LED luminaires. Depending on case configuration, T-8 electronic ballasts or LED power supplies operate both the canopy lights and shelf lights and are located in the cornice area, above the light reflectors. • During replacement of ballasts/power supplies, always confirm that the new bal- lasts/power supplies are the correct replacement parts. Failure to do so may result in damage to the LED system or the luminaires, leading to poor perfor- mance and increased risk of safety issues. Both lighting systems have an ON/OFF switch that is located in the upper left-hand corner of the lighting assem- bly. Once cases have been properly positioned in the store and an electrician has connected the lighting circuit, the lights may be turned on to verify that they are con- nected and functioning properly. To ensure peak performance, it is advisable to run the lighting systems only when the store climate control is on and case refrigeration is started. NOTE: it is highly recom- mended that the ambient store temperature not exceed 80°F. REPLACING T-8 LIGHTS Simultaneously pull down at both ends of the old T-8 light to remove from the lamp holder (Fig. 12). Re- move the lamp caps and plastic shield from the old light, then discard the light. 2. Attach the lamp caps and plastic shield to the new T-8 lamp. 3. Push the new T-8 lamp into place on the lamp hold- er. When the T-8 is properly seated, the lamp button - which secures the T-8 to the lamp holder - will be clearly visible through the lamp button hole (Fig. 13). Fig. 13 Align new T-8 with plug button to secure REPLACING SHELF LED LUMINAIRES 1. Unplug the LED luminaire (Fig. 14). 2. Pinching the latching clips inward at the ends of the lu- minaire, rotate luminaire down at each end until hooks are free, then remove (Fig. 15). 3. To install the new luminaire, place hook into shelf roll at shelf front and rotate rear of luminaire toward the shelf. 4. Depress the rear clip so that luminaire can finish rota- tion and until clip engages the shelf bracket. Fig. 14 Unplug the LED luminaire Fig. 12 Remove old T-8 LIGHTING SYSTEMS 9 Fig. 15 Remove the old LED luminaire REPLACING NON -SHELF LED LUMINAIRES 1. Squeeze plastic clips on the four -pin connector at the end of the luminaire, then pull free of the receptacle (Fig. 16). 2. At the other end, slide the luminaire to the opening and disengage from the metal housing slot (Fig. 17). Fig. 16 Squeeze the latching clips and pull the luminaire free Fig. 17 Slide the other end to the opening in the sheet metal and disengage 3. To install the new luminaire, simply reverse the previ- ous steps. ACCESSING BALLASTS/POWER SUPPLIES Ballasts or power supplies are housed behind the light reflectors and may be easily removed by following these instructions: 1. Remove T-8 lamps or LED luminaires as described earlier in this section. 2. Light reflectors are held in place by screws located along the back edge of the reflector. Remove the screws and while maintaining a secure grip on the reflector, swing the loose edge down until the ballasts/ power supplies are visible on the back -side. 3. Disengage the front edge of the light reflector by lifting it free of the front channel hinge, then carefully remove. Ballasts/power supplies will now be visible on the back -side of the reflector (Fig. 18). 4. To re -install the reflector, secure the front edge of the reflector over the front channel hinge, swing the back edge up into place, then replace the screws along the back edge of the reflector. Fig. 18 Clear view of the power supply on the back side of the light reflector If fascia is installed on top of the case, do not drill into the area above the ballast(s). Doing so may result in case damage. 10 AIR QUALITY CONTROL AIR FLOW & PRODUCT LOAD Do not overload the food product display so that it impinges on the air flow pattern —doing so will result in diminished performance and loss of proper temperature levels, partic- ularly when the discharge honeycomb and return air grille are covered. Please keep products within the load limit line shown on the diagram below (Fig. 19). DEFROST & TEMPERATURE CONTROLS Hillphoenix cases utilize electric, hot gas, or timed -off defrost. The primary components used for the defrost cycle are the various defrost termination sensors, which work to terminate the defrost cycle in the case. These controls may include 1) a Klixon° thermostat, 2) a sensor probe, or 3) a dial -type thermostat with sensor bulb (the thermostat will always be mounted with the electrical con- trols of the case, either in an electrical junction box or in the electrical raceway, etc. If electric defrost is used, the defrost termination sensor will be located either behind the rear baffle or mounted to the coil. If hot gas defrost is used, the defrost termination sensor will be mounted to the dump line —the sensor should always be mounted on the coil -side of the check valve or solenoid valve. Finally, if timed -off defrost is used, the refrigeration cycle is simply turned off by the case con- trols for a specified amount of time; therefore, there are generally no active defrost components utilized. 00DISCHARGE AIR AIR FLOW LOAD LIMIT r � (t RETURN AIR The discharge air probe monitors the temperature of the discharge air and may be used as the defrost termination sensor. The probe can generally be found behind the rear baffle, in the upper baffle, or in front of the honeycomb. NOTE: if the discharge air probe is used for defrost termi- nation, none of the termination sensors listed earlier will be installed in the case. For more detailed information on suggested defrost times and settings, see Appendices B—F. Further adjustment may be required depending on store conditions. DETERMINING SUPERHEAT To identify the correct superheat settings, complete the fol- lowing steps: 1. Obtain suction pressure from the access port. Obtain the suction line temperature from the area near the TXV bulb at the outlet of the evaporator coil (Fig. 20). 2. Using the suction pressure reading and the Sporlan° temperature -pressure chart (see Appendix H), con- vert pressure -to -temperature. 3. Finally, subtract the converted temperature reading from the actual temperature reading. The resulting number is the superheat setting —once this has been determined, adjust the TXV as needed to obtain the proper setting. Fig. 20 Obtain pressure and temperature readings Fig. 19 Airflow FANS & CASE CLEANING 11 SHOCK HAZARD Always disconnect power to case when servicing or cleaning. Failure to do so may result in serious injury or death. FANS Fan blade pitch is set during manufacturing. It is important that the blade pitch be maintained as specified. Do not attempt a field modification by altering the blades. Fan assemblies may be changed with an easy two-step process without lifting up the plenum, thereby avoiding the necessity to unload the entire product display to change the fan assembly: 1. Unplug the fan motor (Fig. 21), easily accessible out- side the plenum. Be certain to push the power cord back through the plenum opening to avoid damage to the power cord. 2. Remove fasteners, then lift out the entire fan basket. Reverse procedure when re -installing fan basket. Fig. 21 Fan basket <Ci> Power cord must be pushed back through the plenum opening before removing the fan basket. Failure to do so may result in damage to the power cord. CLEANING PROCEDURES A periodic cleaning schedule should be established to maintain proper sanitation, insure maximum operating ef- ficiency, and avoid the corrosive action of food fluids on metal parts that are left on for long periods of time. We recommend cleaning once a week. • To avoid shock hazard, be sure all electrical power is turned off before cleaning. In some installations, more than one disconnect switch may have to be turned off to completely de -energize the case. All surfaces pitch downward to a deep -drawn drain trough, funneling liquids and other debris to the waste outlet. Check waste outlet before starting the cleaning process to insure it is unclogged. Avoid introducing water faster than the case drain can carry it away. • Lift the fan plenum to gain access to the coil for clean- ing and maintenance (Fig. 22). Fig. 22 Single -piece fan plenum and coil cover • Exercise extreme caution when working in a case with the coil cover removed. The coil contains many sharp edges that can cause severe cuts to the hands and arms. • To clean the lights, shut off the lights in the case, then wipe them down with a soft, damp cloth. Avoid using harsh or abrasive cleaners as they may damage the lights. Be certain that the lights are completely dry be- fore re -energizing. • If any potentially harmful cleaners are used, be cer- tain to provide a temporary separator (e.g., cardboard, plastic wrap, etc.) between those cases that are being cleaned and those that may still contain product. • Avoid spraying cleaning solutions directly on electrical connections. • Allow cases to be turned off long enough to clean any frost or ice from coil and pans. • Remove kickplate and clean underneath the case with a broom and a long -handled mop. Use warm water and a disinfecting cleaning solution when cleaning un- derneath the cases. Hi//p/�oe�ix A DOVER COMPANY WARRANTY HEREINAFTER REFERRED TO AS MANUFACTURER FOURTEEN MONTH WARRANTY. MANUFACTURER'S PRODUCT IS WARRANTED TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND MAINTENANCE FOR A PERIOD OF FOURTEEN MONTHS FROM THE DATE OF ORIGINAL SHIPMENT. A NEW OR REBUILT PART TO REPLACE ANY DEFECTIVE PART WILL BE PROVIDED WITHOUT CHARGE, PROVIDED THE DEFECTIVE PART IS RETURNED TO MANUFACTURER. THE REPLACEMENT PARTASSUMES THE UNUSED PORTION OF THE WARRANTY. This warranty does not include labor or other costs incurred for repairing, removing, installing, shipping, servicing, or han- dling of either defective parts or replacement parts. The fourteen month warranty shall not apply: 1. To any unit or any part thereof which has been subject to accident, alteration, negligence, misuse or abuse, operation on improper voltage, or which has not been operated in accordance with the manufacturer's recommendation, or if the serial number of the unit has been altered, defaced, or removed. 2. When the unit, or any part thereof, is damaged by fire, flood, or other act of God. 3. Outside the continental United States. 4. To labor cost for replacement of parts, or for freight, shipping expenses, sales tax or upgrading. 5. When the operation is impaired due to improper installation. 6. When installation and startup forms are not properly complete or returned within two weeks after startup. THIS PLAN DOES NOT COVER CONSEQUENTIAL DAMAGES. Manufacturer shall not be liable under any circumstances for any consequential damages, including loss of profit, additional labor cost, loss of refrigerant or food products, or injury to personnel or property caused by defective material or parts or for any delay in its performance hereunder due to causes beyond its control. The foregoing shall constitute the sole and exclusive remedy of any purchases and the sole and exclu- sive liability of Manufacturer in connection with this product. The Warranties are Expressly in Lieu of All Other Warranties, Express or Implied and All Other Obligations or Liabilities on Our Part. The Obligation to Repair or Replace Parts or Components Judged to be Defective in Material or Workmanship States Our Entire Liability Whether Based on Tort, Contract or Warranty. We Neither Assume Nor Authorize Any Other Person to Assume for Us Any Other Liability in Connection with Our Product. MAIL CLAIM TO: Hillphoenix Display Merchandisers 1925 Ruffin Mill Road Colonial Heights, VA 23834 1-800-283-1109 Hillphoenix Refrigeration Systems & Electrical Distribution Products 709 Sigman Road Conyers, GA 30013 770-285-3200 06/00 Warning Servicing & Case Care When servicing or cleaning cases, observe the following procedures to avoid case damage or injury: Be certain that all electric power is turned off before servic- ing or cleaning to avoid electrical shock. In some cases, more than one switch may need to be turned off to com- pletely de -energize the case. Do not spray cleaning solution or water directly on fan motors or any electrical connections. All lighting components must be dried thoroughly before installation and before re -energizing the lighting circuit. Please refer to the Case Cleaning section of this installation manual. Hillphoenix 1925 Ruffin Mill Rd. Colonial Heights, VA 23834 Mon. -Fri. (8 a.m. to 5 p.m. EST) Tel: 1-800-283-1109 Fax: 804-526-7450 Web site: www.hillphoenix.com Due to our commitment to continuous improvement, all specifications are subject to change without notice. Hillphoenix is a Sustaining Member of the American Society of Quality. Fresh thinbng. „ Hi//p/`soe�ix Responsible solutions.- :.* O DOVER COMPANY ACCI��UNET� To ensure proper functionality and optimum performance, it is strongly recommended that Hillphoenix display cases be installed/serviced by qualified and certified technicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix authorized installation/service contractors, please visit our Web site: www.hillphoenix.com NSF® c*us COMPONENT 2017 DOE COMPLIANT Hi//phoenix A DOYER PMFANY P117627 Rev 2.0 02/24 Copyright © 2012 by Hill PHOENIX All rights reserved. No part of this document may reproduced or transmitted in any form or by any means - i.e., electronic or mechanical, including photocopying, recording or any other information storage and retrieval system - without express written permission from Hill PHOENIX. IMPORTANT NOTICES LIABILITY NOTICE For Cases with Shelf Lighting Systems Hillphoenix does NOT design any of its shelf lighting systems or any of its display cases with shelf lighting systems for direct or indirect exposure to water or other liquids. The use of a misting system or water hose on a display case with a shelf lighting system, resulting in the direct or indirect exposure of the lighting system to water, can lead to several serious issues (including, without limitation, electrical failures, fire, electric shock, and mold) in turn resulting in personal injury, death, sickness, and/or serious property damage (including, without limitation, to the display itself, to the location where the display is situated [e.g., store] and to any surrounding property). DO NOT use misting systems, water hoses, or other devices that spray liquids in Hillphoenix display cases with lighted shelves. If a misting system or water hose is installed or used on a display case with a shelf lighting system, then Hillphoenix shall not be subject to any obligations, damages, or liabilities (whether arising out of breach of contract, warranty, tort [including negligence], strict liability, or other theories of law) directly or indirectly resulting from, arising out of, or related to such installation or use, including, without limitation, any personal injury, death or property damage resulting from an electrical failure, fire, electric shock, or mold. P079211M, REVO P079211M, REVO R-744 (CO2) NOTICE For Systems Utilizing R-744 (CO2) Refrigerant For refrigeration units that utilize R-744 (CO2), pressure relief and pressure -regulating relief valves may need to be installed based on the system capacity. The valves need to be located such that no stop valve is positioned between the relief valves and the parts or section of the system being protected. When de -energizing refrigeration units containing R-744 (CO), venting of the R-744 (CO2) refrigerant may occur through the pressure regulating relief valves. These valves are located on the refrigeration system and not on the case model. If venting does occur, the valve must not be defeated, capped, or altered by any means. WARNING: UNDER NO CIRCUMSTANCES should any component be replaced or added without consulting Hillphoenix Field Service Engineering. Utilizing improper components may result in serious injury to persons or damage to the system. IMPORTANT At Hillphoenix@, the safety of our customers and employees, as well as the ongoing performance of our products, are top priorities. To that end, we include important warning messages in all Hillphoenix installation and operations handbooks, accompanied by an alert symbol paired with the word "DANGER", "WARNING", or "CAUTION". All warning messages will inform you of the potential hazard; how to reduce the risk of case damage, personal injury or death; and what may happen if the instructions are not properly followed. Indicates an immediate threat of death or serious injury if all instructions are not followed carefully. Indicates the potential threat of injury if all instructions are not followed carefully. AATTENTION Indicates an important point of information that is key to ensuring proper case functionality. Revision History Rev 1.0 Date 4/23 Change Description JNRBH Manual Creation Author S. Montgomery Rev 2.0 2/24 Foot Length Case Options Added T.A.G. JNRBH 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood GENERAL NOTES: • 6-foot cases are french door, consisting of 3 (24") doors. • 8-foot case are french door, consisting of 4 (24") doors. • 12-foot cases are french door, consisting of 6 (24") doors. • Lighting controls - occupancy sensors are optional. SHIPPING WEIGHT Case Weight JNRBH 2017 2 0E NSF. c �L S COMPLIANT COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS Hi//p/�oe�six a T-MMM, company 2 J N R B H 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood ELECTRICAL DATA Case Length Fans Per Case High Efficiency Fans 120 Volts Amps Watts 2 Door 1 0.34 22.5 3 Door 2 0.68 45.0 4 Door 2 0.68 45.0 5 Door 3 1.01 67.5 6' 2 0.44 53 8' 2 0.44 53 12' 3 0.66 79 LIGHTING DATA Case Length Door Size OP7 Single Swing OP7 French Swing 120 Volts 120 Volts Amps Watts Amps Watts 2 Door 30" 0.28 33.0 --- --- 3 Door 30" 0.41 49.2 --- --- 4 Door 30" 0.55 65.4 --- --- 5 Door 30" 0.68 81.6 --- --- 6' 24" --- --- 0.44 52.3 8' 24" --- --- 0.44 52.3 12' 24" --- --- 0.64 76.6 ANTI CONDENSATE DATA Case Length Door Size 101 Frames Vista Frames Un Heated Doors Un Heated Doors ELMD, 190 160 120 Volts 120 Volts Amps Watts Amps Watts 2 Door 30" 0.36 43 0.36 43 3 Door 30" 0.55 66 0.55 66 4 Door 30" 0.75 90 0.75 90 5 Door 30" 0.94 113 0.94 113 6' 24" 0.39 47 0.39 47 8' 24" 0.43 52 0.43 52 12' 24" 0.68 82 0.68 82 2017 2 0E NSF. C �L us COMPLIANT COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS Hi//p/toersix a T-MMM, company 3 J N R B H 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood GUIDELINES AND CONTROL SETTINGS {DIRECT EXPANSION HFC/CO21 Refrigeration Load Per Superheat Set Case Door Door (BTU/H) Point Qu Bulb Evaporator Discharge Discharge Air Application Length Size Conventional Parallel (IF) (OF) Air (OF) Velocity (FPM) Bakery/Dairy/Cut Produce/Deli 2 - 5 Door 30" 602 572 6-8 30 37 230 Bakery/Dairy/Cut Produce/Deli 6' 24" 400 394 6-8 30 37 230 Bakery/Dairy/Cut Produce/Deli 8' 24" 400 394 6-8 30 37 230 Bakery/Dairy/Cut Produce/Deli 12' 24" 400 394 6-8 30 37 230 Beverage 2 - 5 Door 30" 560 532 6-8 34 39 230 Beverage 6' 24" 392 386 6-8 34 39 230 Beverage 8' 24" 392 386 6-8 34 39 230 Beverage 12' 24" 392 386 6-8 34 39 230 Meat/Seafood 2 - 5 Door 30" 641 609 6-8 28 33 230 Meat/Seafood 6' 24" 480 443 6-8 28 33 230 Meat/Seafood 8' 24" 480 443 6-8 28 33 230 Meat/Seafood 12' 24" 480 443 6-8 28 33 230 DEFROST CONTROLS {DIRECT EXPANSION HFC/CO21 Defrosts Per Day Timed -Off Defrost Fail -Safe (Min) Termination Temp (IF) 2 46 39 NOTES: • " indicates that this feature is not an option on this case model and/or the data is not yet available yet. • Anti -condensate heat values represent a door with no glass heat. • Listed discharge air velocity represents the average velocity at the peak of defrost using a Testo 410i Anemometer. • Temperature and defrost settings listed above are recommended start-up settings. Final operational settings may need to be adjusted for the store conditions in which the case operates. • The recommended evaporator temperatures may need to be adjusted based on system setup, store conditions, etc. The minimum recommended evaporator temperature is 40F below the listed evaporator temperature. • Discharge air temperature values represent readings taken within the upper air channel immediately behind/upstream of the honeycomb. • For optimal performance in HFC applications, it is recommended to close the liquid line and close the suction line during defrost. Defrost parameters may need to be adjusted if other methods are used. • Data listed for the 6', 8', and 12' case models are preliminary values and may be subject to change once final testing is completed. 2017 2 0E NSF. C �L uS COMPLIANT COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS Hi//p/toersix a T-MMM, company 1H 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door J N R B H Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood DOOR OPTIONS FRONT OPTIONS STANDARD SWING DOOR 2, 3, 4, & 5 - DOOR CASES 30" [76.2 cm] J FRENCH DOOR 6', 8' & 12' CASES 24" [61.0 cm] 24" [61.0 cm] zap 7 NSF. 0E c&S COMPLIANT COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. FLAT FRONT ?ONT PANEL VDI err PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS Hi//p/`soe�ix a TrTMM, company 5 JNRBH 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood TOPWIRING —\ 1 311/4" [79.4 cm] 22" 1 ~ x C7 (7 i 22" a (7 r W I 0 W x W x rn o W = = w Z N U x 2 O w 22" I a y O 00 w LL a a N W N U z E 22" 0 E � E v I cEi O E U �o O n N N U V o N N = 22" ao m p T i m roJ. V E U V) 6 3/8" [16.2 cm M 24 1/2" [62.2 cm] o� co 30 7/8" [78.4 cm] 34 5/8" [87.9 cm] 36 5/8" [92.9 cm] cm] 5" [12.7 cm] WIRING TO THE TOP REAR REFRIGERATION (14" X 10" X 4") 2" MINIMUM AIR GAP PIPING TO THE TOP LOCATED 10 5/8" ABOVE FINISH FLOOR E U U 'Eli U V n O O E N U U N O N OD tV cD 7 c a � N � M C1 DEFAULT WIRING TO BOTTOM REFRIGERATION (OPTIONAL) 1 1/2" PVC DRAIN CONNECTION 60" [152.4 cm] (2 Door) 8 3/4" [22.2 cm] 90" [228.6 cm] (3 Door) 1 1/2" [3.8 cm] {END) 120" [304.8 cm] (4 Door) 150" [381.0 cm] (5 Door) 72" [182.9 cm] (6) 96" [243.8 cm] (8') 144" [365.8 cm] (12') NOTES: STUB -UP AREA. RECOMMENDED STUB -UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS. Ends add approximately 1" to case height, 1/2" to the back & 1" to the front 2017 NSF c oL us 70E PRELIMINARY COMPLIANT JNRBH COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. Rev. Date Rev. # Rev. Title 02-01 24 5 DATA UPDATE 11-09 23 4 CASE OPTIONS DRAIN LOCATION FROM CENTERLINE CASE LENGTH 2DR 3DR 4DR 5DR 6' 8' 12' X011 0.5" 0" 0" Hi//p/`soersix a'=' company 6 Thank you for choosing Hillphoenix for your food merchandising needs. This handbook contains important technical information and will assist you with the installation and operation of your new Hillphoenix specialty cases. By closely following the instructions, you can expect peak performance, attractive fit and finish, and long case life. We are always interested in your suggestions for improvements (e.g. case design, technical documents, etc.). Please feel free to contact our Marketing Services group at the number listed below. Thank you for choosing Hillphoenix, and we wish you the very best in outstanding food merchandising. CASE DESCRIPTION This manual specifically covers the JNRBH beverage, bakery, dairy, deli, meat and seafood reach -in door merchandisers. STORE CONDITIONS Hillphoenix cases are designed to operate in an air-condi- tioned store that maintains a 75°F (24°C) store temperature and 55% (max) relative humidity (ASHRAE conditions). Case operation will be adversely affected by exposure to excessively high ambient temperatures and/or humidity. REFRIGERATION SYSTEM OPERATION Air-cooled condensing units require adequate ventilation for efficient performance. Machine -room temperatures must be maintained at a minimum of 65°F in winter and a maximum of 95°F in summer. Minimum condensing temperatures should be no less than 70°F. SHIPPING CASES Transportation companies assume all liability from the time a shipment is received by them until the time it is delivered to the consumer. Our liability ceases at the time of shipment. RECEIVING CASES Examine fixtures carefully and in the event of shipping dam- age and/or shortages, please contact the Service Parts Department at the number listed to the right. CASE DAMAGE Claims for obvious damage must be 1) noted on either the freight bill or the express receipt and 2) signed by the carrier's agent; otherwise, the carrier may refuse the claim. If damage becomes apparent after the equipment is unpacked, retain all packing materials and submit a written request to the carrier for inspection within 14 days of receipt of the equipment. Failure to follow this procedure will result in refusal by the carrier to honor any claims with a consequent loss to the consumer. If a UPS shipment has been damaged, retain the damaged material, the carton and notify us at once. We will file a claim. LOST/MISSING ITEMS Equipment has been carefully inspected to insure the highest level of quality. Any claim for lost/missing items must be made to Hillphoenix within 48 hours of receipt of the equip- ment. When making a claim please use the number listed below. SERVICE PARTS & TECHNICAL SUPPORT For service parts questions regarding our cases, please contact our Service Parts Department at 1-833-372-7871 or orderparts@doverfoodretail.com For technical questions regarding our cases, please contact our Technical Support Department at 1-833-280-5714. CONTACTING THE FACTORY If you need to contact Hillphoenix regarding a specific fixture, be certain that you have both the case model number and serial number. (This information can be found on the data tag, located at the top -left interior, rear exterior panel or interior rear lower storage of the case. Location may vary based on case design.) Hillphoenix 1925 Ruffin Mill Rd. Colonial Heights, VA 23834 Mon. -Fri. (8 a.m to 5 p.m EST) Website: www.hillphoenix.com 7 1. Ask the general contractor if your current copy of the building dimensions are the most recently issued. Also, ask for the points of reference from which you should take dimensions to locate the cases. 2. Using chalk lines or a laser transit, mark the floor where the cases are to be located for the entire lineup. The lines should coincide with the outside edges of the case feet. Leveling is necessary to ensure proper case alignment and to avoid potential case damage. Locate the highest point on the positioning lines as a reference for determining the proper height of the shim -pack levelers. Alasertransit is recommended for precision and requires just one person. 4. Locate basehorse positions along the chalk line. Place 2X of the 6" length shims next to each other (Fig 1.). They should be placed under the basehorse and kickplate supports (Fig 3.). Stack shims until floor is leveled. Fig. 1: Kickplate support LINE-UP & INSTALLATION Single Case 1. Roll the case into position, leaving a minimum of 2" between the wall and back of case. Using a "Y' bar, raise the end of the case (under cross support), remove the caster assemblies (Fig. 2) and lower the basehorse on to the shim packs. Repeat at other end. Be certain that your hands and feet are out of the way before lowering the case after the removal of the casters. Failure to do so may result in serious injury. Fig. 2: Removing the casters is an easy process. Simply flatten and remove the cotter pins that are holding the casters in place. Then lift the case with a `J" bar and slide the caster assemblies out. The dismantled casters can now be discarded. 2. Once the basehorse is properly placed on the shim packs, check the horizontal level by placing a bubble level on the front sill. For the vertical plumb, repeat this process by placing the bubble level on the case frame. Add/remove shim packs as needed. NOTE: DO NOT use doors as plumb reference; doors have a designed setback. Use case frame for measurement. Multi -Case 1. Remove shelves and discard the shelf clips. 2. Remove any loose items (shipping braces, mirror assemblies, etc.) from the cases that may interfere with case joining. Keep all loose items as they will be used later in the installation process. 3. Remove the return air grill at the case joint. The grill lifts out without fasteners and may be easily removed to gain clear access to the case -to -case joining bolts. 4. Follow the single -case installation instructions for the first case, then position the nextcase in the line-up approximately 3' away. Apply the foam tape gasket (supplied) and beads of butyl or silicone sealant to one of the adjoining case ends (Fig. 3). Remove the caster assemblies. 5. When the last casters are removed, pipe -rollers may be used to help move the case. While the case is still in a raised position, position the pipe-roller(s) near an interior vertical support of the baseframe assembly, then lower the case onto the pipe-roller(s). Be certain that both the front and back baserails are resting on the pipe-roller(s), since failure to do so may result in case damage. 6. Push the case to within 3-4 inches of the adjoining case. Once the case is properly positioned, lift it at the opposite end with the "J" bar in order to remove the piperoller(s). 7. Push the cases tightly together, then lightly bolt them TRIM OUT together through the holes that are provided (Fig. 3). 1. Seal the interior case -to -case joints with caulk (supplied), Tighten all the joining bolts until all margins are equal. Be then apply acrylic tape (supplied) over the pipechase seam careful not to over tighten. (Fig. 4). The tape acts as a watershed preventing water 8. Repeat steps 2-6 of this sequence for all remaining cases. from settling in the case joint. Be certain to properly level all cases. 9. If seismic brackets were ordered, see Appendix E for detailed installation instructions. X = Butyl or Silicone sealant 1 7 Foam tape gasket z � 3 6 4 5 \ Fig. 3: Bolt holes, foam tape gasket and sealant M LU 2 i< LL r f ACRYLIC , ' TAPE ' � f r � r • 0 0 WE -- ASE Fig. 4: Sealing the pipe chase 2. Re -install shelves (or peg hook assemblies if applicable). Be aware that differing shelf configurations will affect energy consumption and case performance. If peg hook assemblies are included, see Appendix F for installation instructions. 3. Properly align the front panels as needed, then install the ront panel trim (Fig. 5). Fig. 5: Front panel joint trim 4. Fasten the door -frame joints to the adjoining door frames using the supplied T-bolts. z KICKPLATE INSTALLATION 1. Using the screws provided, install the upper kickplate retainer and the "J" rail, both of which are shipped loose in the case (Fig. 6). The kickplate brackets are pre -installed at the factory. r \ KICKPLATE RETAINER — — — — — — — -- 1. Attach the kickplate retainer. 2. Attach the "J" rail to 2 the kickplate bracket. "J" RAIL Fig. 6: "J" rail installation 2. Insert top of kickplate into the kickplate retainer. Slide the kickplate up into the retainer, then down onto the "J" rail (Fig. 7). Be certain that the bottom of the kickplate is fitted over extruding "lip" of the "J" rail. 1. Slide kickplate UP into kickplate retainer recess. 2. Drop the kickplate DOWN onto the "J" rail lip. i 1�C�\ r1 \ KICKPLATE Fig. 7. Kickplate installation 3. Install end kickplates with screws provided and insert plug buttons. 4. Insert nose bumper into streamlyne bumper channel. Roll nose bumper into channel along entire lineup, up to 96'. We recommend leaving an additional 6" of nose bumper at the ends to allow for shrinkage during the first 24-48 hours following case start-up. 5. After sufficient time has passed to allow for bumper shrinkage, cut away the excess bumper for final fit and finish. Be certain to use an appropriate cutting tool (tubing - or PVC -cutter) to ensure a smooth cut. 6. If a case top fascia is included, see Appendix C for installation instructions. 10 REFRIGERATION Top -piping is the standard configuration for the JNRBH case. Rear piping penetration is an optional configuration and located at the rear -right area of the case (Fig. 8). If top piping is utilized, piping stub -outs are located at the top -back -right of the case. If hot gas defrost is utilized, suction lines to each case in the circuit should be of equal distance from the main suction line. The expansion valve and other controls are located on the left- hand side of the case and are accessible by lifting the two left- hand deck pans —lifting the fan plenum is not required. If it becomes necessary to penetrate the case tank in any area, be certain to seal any open gaps aftewards with canned -foam sealant and white RTV. JNRBH FIELD REFRIGERATION HOLES: IF INSTALLING REFRIGERATION LINES THROUGH TANK REAR WALL, LOCATE HOLE AS SHOWN BELOW. 0 3.5" MAX TANK END CTANRKEBOTTOM 5 - 9/16" TO 5 - 11/16" 3 - 7/8" TO 4° Fig. 8: Penetrate foam as needed to access piping AATTENTION 7indicates an important point of information key to ensuring proper case ality. 7" 17.8 cm] 5" [12.7 cm] WIRING TO THE TOP REAR REFRIGERATION (14" X 10" X 4") 2" MINIMUM AIR GAP PIPING TO THE TOP LOCATED 10 ABOVE FINISHH FLOOR U U U U N U r O O U N U M O n N L V W V m V M M M N N - N 11 � N M M DEFAULT WIRING TO BOTTOM REFRIGERATION (OPTIONAL) 1 1/2" PVC DRAIN CONNECTION 8 3/4" [22.2 cm] 60" [152.4 cm] (2 Door) 90" [228.6 cm] (3 Door) 1 1/2" [3.8 cm] {END} 120"[304.8 cm](4 Door) 150" [381.0 cm] (5 Door) 72" [182.9 cm] (6) 96" [243.8 cm] (6) 144" [365.8 cm] (12') DRAIN LOCATION FROM CENTERLINE CASE LENGTH 2DR 3DR 4DR 5DR 6' 8' 12' '.X" 0" - 0.5" 011 0" --- - - 11 PLUMBING The drain outlet is specially molded out of PVC material and is located in the front -center of the case for convenient access. The "P" trap, furnished with the case, is constructed of schedule 40 PVC pipe (Fig. 9). Care should be given to ensure that all connections are water -tight and sealed with the appropriate PVC or ABS cement. Fig. 9: T" trap Fig. 10: Junction box above on top of case Be certain to clear the case of any loose packaging or case materials before energizing the case. Failure to do so may result in case damage or malfunction. The drain lines can be run left or right of the tee with the proper pitch to satisfy local drainage requirements. Since the kickplate is shipped loose with the case, you should have open access to the drain line area during installation. 7eca rtain that all piping, plumbing and l connections comply with local If the kickplate has been installed, you will find it very easy to remove. Simply lift the kickplate up from the "J" rail and pull it out, away from the case (see Trim Out section). ELECTRICAL Electrical hookups are made through the power supply box. Top Piped - The power supply box is mounted to the case top (Fig. 10). If any brazing is necessary, place wet rags around the area to avoid tank damage. For case -to -case wiring, run conduit between the power supply boxes or run wiring through the raceway. When connecting to the power supply on the case, field wiring should exit box from the side furthest away from case wiring (right side) to allow more room inside for wiring connections. Always check the data tag located on left end exterior panel or top interior of the case. The case must be grounded. For more detailed electrical wiring information (see Appendix A). 12 GENERAL LIGHTING INFORMATION Hillphoenix cases are equipped with LED luminaires. LED power supplies operate the vertical mullion lighting. The lighting system has an ON/OFF switch located at the inside, left ceiling of the case. Once a case has been properly positioned in the store the lights may be turned on to verify that they are connected and functioning properly. To ensure peak performance, it is advisable to run the lighting systems only when the store climate control is on and case refrigeration is started. Note: It is highly recommended that the ambient store temperature not exceed 80OF. SHOCK HAZARD Always disconnect power to case when cleaning, servicing or configuring components of the light- ing system. Failure to do so may result in serious injury or death. Using improper DC power supplies may damage the luminaires, resulting in sub -standard opera- tion and increased chances of safety issues/ injury. Never replace a 24V DC power supply with a T8 or T5 ballast of any kind! Ballasts use alternating current (AC) instead of direct current (DC) and operate at a much higher voltage than is used by this LED system. Doing so will damage the LED system and increases the chance of safety issues/injury. LED DRIVER/POWER SUPPLY BOX The LED driver is installed within the mullion itself so this will not be found inside the power supply box. The lighting system has an ON/OFF switch located at the inside, left ceiling of the case. REPLACING LED LIGHTS Once store power is connected and the light circuit is ener- gized, the LED system should operate without the need for any significant maintenance for several years. Should a power sup- ply need to be removed and/or replaced, turn off the power to the case before proceeding. Be certain to replace the power supply with genuine Hillphoenix parts or a comparable UL- listed Class-2 rated regulated 24V DC power supply with 100W output capacity. LED LUMINAIRES Replacing Optimax LED Vertical Mullion Lighting: 1. Locate the mullion lighting and check for the orientation of wiring. 2. Remove the zipper strips and contact plates to reach the wiring of the existing light. 3. Remove the LED fixture wiring from the wiring connectors in the back of the mullion. 4. Using a Philips head or power drill, remove the mounting screws on both the top and bottom of the existing light. Gently remove the LED fixture from the mullions including any mounting clips at the center of the mullion. 5. Locate the center of the mullion and make a 0.125" diameter hole for the center clip, but only if needed. Note: Make sure not to damage any exsiting wiring inside the mullion. 6. Using the center clip mounting screw install the center clip. 7. Take the new Optimax LED light and remove the molex connector and the grommet from the cable assembly us- ing a wire cutting tool. 8. Strip the wire ends (1/2") for wire assembly. 9. Feed the cable assembly through the egress hole on the mullion. 10. Make the wire connections to the existing frame wiring inside the mullion. 11. Snap the center fixture into the center mounting clip (Fig. 11). 12. Mount the fixture using 8 x 5/8 Philips screw. Note: No additional holes are needed in the mullion. Pre-existing holes from the existing Optimax installation can be used on the new fixtures. 13. Test the lights by turning on the light switch to make sure the connections are secure. 14. Place the contact plates back and secure using the zipper stirps. Note: Use new zipper strips if necessary. 15. Repeat the same process for the remaining mullions and the end jambs. 16. Mullions use Center Fixtures 60-24826-7XXXX and End use Left 60-24827-7XXXX and Right 60-24828-7XXXX. (End fixtures use different hardware.) 13 Fig. 11 Optimax center mounting clip 14 Before powering -up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and compliance with warranty terms. ❑ Have you thoroughly examined the case for shipping damage? (see pg. 7) ❑ Have you removed and discarded the casters? (see pg. 8) ❑Have you checked the vertical plumb of the case? The horizontal level? (see pg. 8) ❑ Have you applied the foam tape gasket and sealant between adjoining cases? (see pg. 8 - 9) ❑Have you sealed the case -to -case joints by applying caulk and acrylic tape to the pipe -chase seam? (see pg. 9) ❑ Have you sealed any tank penetrations? (see pg. 11) ❑ Have you cleared the case of any loose packaging or case materials? (see pg. 12) 15 AIR FLOW & PRODUCT LOAD It is important that you do not overload the food product display so that it impinges on the air flow pattern — overloading will cause malfunction and the loss of proper temperature levels, particularly when discharge and return air sections are covered. Please keep products within the load limit line shown on the diagram below (Fig. 12). DISCHARGE AIR LOAD LIMIT RETURN AIR Fig. 12: Airflow and load limit inside case To insure optimal operation of the door and frame system, a constant 120V supply be used to power the electrical circuits. Cycling the input voltage will adversely impact case performance. DETERMINING SUPERHEAT To identify the correct superheat settings, complete the following steps: 1. Obtain suction pressure from the access port. Obtain suction line temperature from the area near theTXV bulb at the outlet of the evaporator coil (Fig. 13). 2. Use appropriate Refrigerant temperature -pressure chart to convert to Temperature from the measured suction pressure. 3. Finally, subtract the converted temperature reading from the actual temperature reading. The resulting number is the superheat setting —once this has been determined, adjust the TXV as needed to obtain the proper setting. Fig. 13: Obtain pressure and temperature readings 16 SHOCK HAZARD Always disconnect power to case when servicing or cleaning. Failure to do so may result in serious injury or death. FANS Reach -in door cases feature electronically commutated (ECM) fan motor assemblies, whereby the fan blade, fan motor, and basket are integrated into a single unit. EBM Papst fans have 8" fan blades with a factory -set blade pitch. The fans are pre-set to run at 1800 RPMs; if an airflow adjustment is required, replacement fans with a different RPM set -point may be ordered. Fan assemblies may be changed with an easy two-step process without lifting up the plenum, thereby avoiding the necessity to unload the entire product display to change the fan assembly: 1. Unplug the fan motor (Fig. 14) from the receptacle on the exterior of the fan plenum. Push the power cord back through the plenum opening. 2. Remove fasteners, then lift out the entire fan basket. (Reverse procedure when re -installing fan assembly.) Fig. 14: Fan basket Power cord must be pushed back through the plenum opening before removing the fan basket. Failure to do so may result in damage to the power cord. CASE CLEANING A periodic cleaning schedule should be established to maintain proper sanitation, insure maximum operating efficiency, and avoid the corrosive action of food fluids on metal parts that are left on for long periods of time. We recommend cleaning once a week. • To avoid shock hazard, be sure all electrical power is turned off before cleaning. In some installations, more than one disconnect switch may have to be turned off to completely de -energize the case. • All surfaces pitch downward to a deep -drawn drain trough, funneling liquids and other debris to the waste outlet. Check waste outlet before starting the cleaning process to insure it is unclogged. Avoid introducing water faster than the case drain can carry it away. • Lift the fan plenum to gain access to the coil for cleaning and maintenance. Remove screws where plenum flange sits on top front of coil. Pull plenum forward and rotate up (Fig. 15). Fig. 15. Fan plenum and removing coil cover • To clean the lights, shut off the lights in the case, then wipe them down with a soft, damp cloth. Avoid using harsh or abrasive cleaners as they may damage the lights. Be certain that the lights are completely dry before re -energizing. • If any potentially harmful cleaners are used, be certain to provide a temporary separator (e.g., cardboard, plastic wrap, etc.) between those cases that are being cleaned and those that may still contain product. ' Exercise extreme caution when working in a case with the coil cover removed. The coil contains many sharp edges that can cause severe cuts to the hands and arms. • Avoid spraying cleaning solutions directly on electrical connections. • Allow cases to be turned off long enough to clean any frost or ice from coil and pans. • Remove kickplate and clean underneath the case with a broom and a long -handled mop. Use warm water and a disinfecting cleaning solution when cleaning underneath the cases. 17 PARTS ORDERING Hi//p/�oe�ix® a company Contact the Service Parts Department at: 1-833-372-7871 or orderparts@doverfoodretall.com Provide the following information about the part you are ordering: • Model number and serial number* of the case for which the part is intended. • Length of the part (if applicable). • Color of part (if painted) or color of polymer part. • Whether part is for left or right-hand application. • Quantity *Data tag is located on the left end exterior panel or top interior of the case. If the parts are to be returned for credit, contact the Parts Department. Do not send parts without authorization. in A....................................................................................................................................... ELECTRICAL WIRING B............................................................................................................................................ CASE TOP FASCIA C...................................................................................................................................................... PARTS LIST D........................................................................................................................................ SEISMIC BRACKETS E...................................................................................................................................................... PEG HOOKS 19 N O ATTENTION ELECTRICIAN FOR SAFETY AND CODE COMPLIANCE GROUND FIXTURE AT TIME OF INSTALLATION CAUTION: RISK OF ELECTRIC SHOCK. MORE THAN ONE POWER -SUPPLY. DISCONNECT ALL POWER -SUPPLIES BEFORE SERVICING. P901598E - R5 WIRE IDENTIFICATION BLACK WHITE BLUE RED YELLOW PURPLE ORANGE GREEN RED BLK DEFROST HEATERS 1-PHASE 1,2 DEFROST HEATERS 3-PHASE L1 L3 L2 ANTI -CONDENSATE HEATERS 14 13 16 15 18 17 AISLE WARMER 10 9 DRAIN HEATER 36 37 PRIMARY FANS 4 3 40 SECONDARY FANS 6 5 AMBIENT FANS 8 LIGHTS 12 11 BELL 60,62 TEMPERATURE CONTROL 19,20 DEFROST TERMINATION CONTROL 22 21 23 DEFROST SAFETY CUT-OUT CONTROL 28 27 29 LIQUID LINE SOLENOID 30 31 98 LINE 38 39 ASETIOONTROL ERLENOID POWER 42 41 TRANSFORMER 24 25 CAPACITR 34 35 RECEPTACLE 32 33 75 SYSTEM NEUTRAL 3-PHASE N POWER CORD SELF-CONTAINED 58 57 SERVICE LIGHT HI -PRESSURE 53,54 HIGH PRESSURE SWITCH 49,50 DUAL PRESSURE SWITCH 51,52 CONDENSING UNIT POWER 48 47 44 220V CONDENSING UNIT FAN 45 46 IG RECEPTACLE 26 43 77 GFI RECEPTACLE 56 55 79 HUMIDIFIER 70 71 REFRIGERATED PAN SOLENOID 65 220VI 65 64 99 REFRIGERATED PAN BYPASS SOLENOID 67 220V 67 66 AIR HEATER DEFROST SOLENOID 69 220V 69 68 MAIN SECONDARY FLUID SOLENOID 73 220V 73 72 AIR DEFROST FAN 74 59 SECONDARY COOLANT PUMP 76 61 TANK FLUSH SOLENOID 87 220V 87 86 MISTING SOLENOID 89 220V 89 88 DRIP DOWN TIMER 90 REAR STORAGE BOX FANS 94 GROUND TO EXTERIOR FRAME 81 GROUND TO INTERIOR LINER 83 GROUND TO JUNCTION BOX 85 GROUND TO LIGHTS 97 r a FL m r m 0 C� a r Z A2 ELECTRICAL WIRING MANUFACTURING SPECIFICATION Hi//pI`soe�ix WIRING DIAGRAM, IVIED TEMP DOOR CASE «-..• OFF -TIME DEFROST Submitted By: Frank Baze, P.E. Release Date: 04120115 ECN: 99928 Doc. Number: R859742 Rev: 0 OPTIONAL LOTION SENSOR UGHTING CONTROL r--------------------------------------------------------------------- YiHTE RED j , HT RE) RED DRNER LED 1 120V LIGHTS`,�, GBLK OLN BLK OLK RED I `f BLACK MOTION SENSOR LIGHT SNATCH r------------------------ WHITE I I 120V LIGHTS I LIGHTS -------------------------------------- BLK I BLACK LIGHT SWITCH DRNER RE LE- I ANTI-COND, C WHITE {( U 120V rn BLACK DOORS CASE -MOUNTED FRAME ------------ LED LIGHTS I LED 2 I I I I AMBIENT FANS 1 WHITE *OPTIONAL* 120N BLACK (MAXIMUM OF 3 FAN UNITS IN CHAIN) IA1 M2 M3 GROUND ilf GREEN (ATTACHED TO CASE) 120V FANS { (1 FAN PER SECTION OR DOOR TYP., MAXIMUM OF 6 FANS) 21 N N NC AD, EN[ OU- F EXPLODED VIEW SHOWING THE EXPLOSION OF FASCIA FRAMEWORK MODULE, CASE AND JUNCTION BOX NAME: 10084655 OBJECT: R900217 DATE: 03-10-202320:44:11 NillMrs oessix. DlsyleyCas .m.M R900217 06-0-zoz3 120331 1 RELEASED TO PRODUCTION I68i"55 DATE ECN NO. I R/ DESCRIPTION ff�w�o. REF,AS,FAC,P2,RMT-DSPL REVISIONS DRAWN BY: RRH DATE: 06-03-202 SHEET: 1 OF 2 0 INFORMATION SHOWN IS PROPRIETARY AND CONFIDENTIAL. DUPLICATION AND USE IS PROHIBITED WITHOUT PERMISSION FROM HILLPHOENI% a a N W o C 3.128) DOOR CURVE EDGE TO " FASCIA FRONT �REMOTELAY BRACKET FASCIA FRONT TOP VIEW SCREW MOUNTING LOCATIONS 0 NOTCH IS PROVIDED ON 12"FASCIA FOR THE PROVISION OF REMOTE DISPLAY BRACKET CAUTION -AVOID DAMAGE TO CABLE DURING INSTALL LEFT VIEW A o B DETAIL B REMOTE DISPLAY BRACKET DETAIL A C � Y K O REPEAT ISOMETRIC VIEW 0 z uuueea w HN/p/aoeriix. DISCIe,y Cases a�--• R900217 SLIDE & MOUNT THE FASCIA SUPPORT as °""�° DETAIL C BRACKET UNDERNEATH ISOMETRIC REAR VIEW THE TOP FLANGE OF 12" FASCIA FRONT REF,AS,FAC,P2,RMT-DSPL DRAWN BY: RRH DATE: 06-03-202 SHEET: 2 OF 2 INFORMATION SHOWN IS PROPRIETARY AND CONFIDENTIAL DUPLICATION AND USE IS PROHIBITED WITHOUT PERMISSION FROM HILLPHOENIX 17. Cl PARTS LIST 24 C2 PARTS LIST Location Part Descriptions Number 1 Kickplate, Strome Gray 2 Lower Front Panel, Painted Custom Color 3 Back Panel 4 Deck Pan, Painted, Unpainted 5 Wire Shelving, With or Without Covers 6 Front Baffle, Aluminum 7 Honeycomb 1"x4 "x48" 8 Honeycomb Retainer, Painted 9 Upper Rear Baffle, Center or End 10 Nose Bumper, Polymer Custom Color 11 Lower Rear Baffle Painted. 12 Top Canopy 13 " J " Rail, for Kickplate 14 Top Flue Panel Painted 15 Frame Assembly Left, Right & Center 16 Door, Specify Mask Color, Ardco or Anthony, Door Handle Type, Low or Me- dium Temperature Applications, Door Swing - French, Left or Right -Hand 17 Door Frame Manufactures Low or Medium Temperature Application 18 Coil 19 Bumper Retainer 20 Bottom Wire Racks 21 Tag Molding, PVC, or Aluminum 22 Thermometer Includes Bracket 23 End Assembly Solid Custom Color Identify Left or Right or Color of Panel And Color of End Trim Color 24 End Kickplate, Painted, Stainless Steel 25 Defrost Heaters 26 Anti -Condensate Heaters, Discharge 27 Base Frame 28 Fan Motor - State High Efficiency or Standard 29 Fan Blade 30 Fan Basket 8" 25 D1 SEISMIC BRACKETS The case constraint brackets can be installed in 2 ways. Option 1 can be used on multi -deck cases and uses an "U' bracket to attach the case to a vertical wall, as shown below. Option 2 can be used on multideck cases or on cases that do not have a canopy. Attach the "U' brackets to the base frames in either of the locations shown below. Brackets are available for all base frame heights. ATE USE h1 a ORCZ) I CON STFAINT a ATTACH TO TOP USE (31 #10 EEL SCREWS OPTION 2 ON EITHER SIDE OF THE BASE FRAME OPTION 1 SASE PRAMIL OOTrQT1iAMT OWXV - E RR CAA cour" t S"um "m O PORA rTAu MSt ►RAWL COMSTIpMOP .RAO12TS ARM ALSO A/1AAME •OR ALL .Alt MUM DRIG T S USt pl Ilo St'-? OIO.LIRG ' St-1 TAPRAA; SCREWS MR ATl*=RMENT TD M DAM fRAUL 1 ALT LIMA It _DCATION MACic OF CASQ unt III o1' oR (A cvr ARCIORM PM ATiA "NtM To TT! Sion PLOW . �ssT.ww 5 IV 4 LEFT ;IEN TOP VIEW O O O F .)•IT 'r I Fh 0 0 0 0 0 0 0 0 •n a o N P1 i :50 1.000 .750 000 — 6.819 O.A. (3) 0.250 HOLES 0.500 12) 0.375 RUE N 70 D 0 x m N ,LL NO;$ 10 AM QPKIFIEL ILL rYLTYYL •Y .I/Y �oKn:r.+rurawucn� r ws •Y�Yaar •r Yrr Yn n Yar = YIPI►NCE AC:E=TA-LE GL Ns► 1 PG C4LYANIZE7 Attu PUM4. HI.LILL •II— •_ — . IsisM. WI i� ;:.. r� .w.. M,...M rY Iwo. yr-rvr F; 6 6 8 C L rrT MYI•f.. a1T.l 5• 11F.covaT44T E., �• C5: I5l06 U35 X RELEASED T� 'RQ UCTla '""'� CIC s*TF ss.ls/ea SHEET I ,iF I A R ILLN 140.11411 D SC a y 14PMATIUM snow 13 •WIIIITYIr YO C0WINUMK. VMLICATIOQ NO WE Is I'MIDITIC WIT"INT Pn■ISsI:• n:. HILL -rc.rr I LEFT IEN FRONT VIEW 1.910 750 000 8.819 0. A. (3) 0.250 HOLES -0.500 21 0 375 W LE` v n m N ALL Rfix sir ouss spETIFIED 41 l TM..L.1.. &1•23tow.1 u wI•Y. L..Lc I L. a.0 .aI. !rl\ ./T T. K.l[ 1 .1c V0114CE ACCEoT.3LE GL N5i ••� I tG GALVAAIIEC Ar :ILL'. �- F 166805K(,-L �KT.L./' �F.CONSTRNT iEV BY j 5+0i 62357 X RELEASED TO PRODbCTION "A"" CRC DATE f%,jt,*G SHEET I OF I A CN 110 JR/I DESCRIP-TIT11 IWDIMTI OU 59=0 IS .A01!1 LT41' AM COST IiITIAL. ALICNS IMAM ASC IS ►RNIDITm IITIMT .SHII SSIO. rAW WILL PM6119 a LEFT FLE F"_uT :IE� 910 1.250 I.000 .750 .000 0 0- 0 0{ a � e o .o _C, M cm CD 0 0 0 0 0 O iD N'1 f N 12.819 O.A. (3) 0.250 HOLES 1- (2) 0 375 HOLES J J y M 0 m N LLl Kom 9e AM SPEtIEiE( ILL i.NTNN.I II.. JI'%I Mme,I f.I rta lus-to t rlr . s: I..—$ ..0 wino R H WILE .1; .ARIawrE 4CCEPTOLE —, A �M IBC GALOANIIE:- Am- CT42PWISM. H'l I„BW Motors. .4 rw,. F 766806GGL +w rsnrww BkT.L III 9E.00eSTRIT REvDS/151C6 B' ! 357 X 'ELEASED TO PRODUCTION a'w �' CRC WE csrls a SHEET. I : F DATE ECN NO R/ DESCRIPTION IaFOm.TIOs EHMN 11 nONIETwi wq (MFIIEQLL 004PLIC.TION 4110 NE It MIOHIOITEI •ITH.4T OUNIII►10" F"M HILL PH E.I1 15 OC LEFT I PA Mall F I. T IEh 16.A69 16 019 910 1.250 1.0000 g .005 U U U - O O 0 0 < O �+•� v O aC Q • — N M 00 0 0 00 0 0 U i0 1n v — N 6.819 O,A 0.250 HOLES 0,500 0.375 HOLES ALL EEIOS W LKESS S►E{IFIFO eWm A r . -uu KiIW�J .1. l MIA 0PAWA AA3 "W" al It K-li r; _ APIANCE ACCEPTABLE GL MSP •PPWIra GALVANIZED I•l• IL�L/ I� SILL o•3`' ,..I.L ICIdRa �. lw�� .I inn try- m Faiw.- F r o o 8 0 7 E G L �W"M RIT I IS• RF CANVIR&T E1 PEG HOOKS When a case merchandiser's shelves are removed, air drifts back to the rear duct and swirls around, thus breaking the protective air envelope and allowing case air to mix with ambient store air (Fig. 1). When the shelves are present, air flows from the top and back, forming a protective barrier against the ambient store air (Fig. 2). COIL COIL When peg bars are present, air falls through openings between packages and fails to maintain a protective barrier (Fig. 3). When the bars are fully stocked, the effect is minimized; however, product temperatures will not be optimal. Sweating may be noticed on the top duct panel above the bars and frost will build up on the coil faster, requiring more frequent defrost cycles. For proper set-up of a merchandiser with peg bars, install a solid baffle above each row of peg bars - except for the bottom shelf - to maintain proper air flow and temperatures inside the case. Non -load -bearing solid air baffles should run the same width as the peg bars. r 11 31 Hi//p/toeryix: n �cOMPANV Hill PHOENIX, Inc. Hereinafter Referred To As Manufacturer LIMITED WARRANTY GENERAL WARRANTY Manufacturer's products are warranted to be free from defects in materials and workmanship under normal use and maintenance for fourteen months from date of shipment from manufacturer (the "Base Warranty Period"). In the event of a qualifying warranty claim, a new or rebuilt part to replace any defective part will be provided without charge. The replacement part is covered under this warranty for the remainder of the applicable Base Warranty Period. In order to be eligible for warranty coverage, customer must: (i) notify Manufacturer promptly upon discovery of a warrant defect, and (ii) comply with the warranty claim procedures provided by Manufacturer from time to time. This equipment warranty does not include labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing, or handling of either defective parts or replacement parts. The warranty shall not apply: 1. To any unit or any part thereof which has been subject to accident, alteration, negligence, misuse or abuse, or which has not been operated in accordance with the manufacturer's recommendations, or in conditions outside of Manufacturer's specifications, or if the serial number of the unit has been altered, defaced, or removed. 2. When the unit, or any part thereof, is damaged by fire, flood, or other act of God. 3. To products that are impaired or damaged due to improper installation. 4. When installation and startup forms are not properly completed or returned within two weeks after startup. 5. If the defective part is not returned to the Manufacturer. 6. To service, maintenance or wear and tear parts (such as lights, starters and ballasts) MODIFICATIONS TO GENERAL WARRANTY The following sets forth certain modifications to the General Warranty for specific products of Manufacturer: DISPLAY CASE AND SPECIALTY PRODUCTS CLEARVOYANT° LED LIGHTING The warranty period for Clearvoyant LED lighting components within the Clearvoyant lighting system is five years from date of shipment. REMEDY LIMITATION/DAMAGES EXCLUSION THE REMEDY OF REPAIR OR PROVISION OF A REPLACEMENT PART WITHOUT CHARGE SHALL BE THE EXCLUSIVE REMEDY FOR ANY WARRANTY CLAIM HEREUNDER. WITHOUT LIMITING THE FOREGOING, MANUFACTURER SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFIT, LABOR COST. LOSS OF REFRIGERANT OR FOOD PRODUCTS. EXCLUSIVE WARRANTY THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY WITH RESPECT TO THE PRODUCTS. ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED. NO IMPLIED WARRANTY SHALL BE DEEMED CREATED BY COURSE OF DEALING OR USAGE OF TRADE. NO OTHER PERSON IS AUTHORIZED TO EXPAND OR CREATE ANY OBLIGATION GREATER THAN OR MORE EXPANSIVE THAN THE WARRANTY PROVIDED HEREIN. Submit warranty claims to: Hillphoenix Refrigeration & Power Systems Division 2016 Gees Mill Road Conyers, GA 30013 Warranty / Service Phone:1-833-280-5714 Hillphoenix Display Case Division 1925 Ruffin Mill Road Colonial Heights, VA 23834 Warranty / Service Phone:1-833-280-5714 Hillphoenix Specialty Products Division 703 Franklin Street Keosauqua,lA 52565 Warranty / Service Phone:1-833-280-5714 4844-3514-3187.2 Warnin Maintenance & Case Care When cleaning cases the following must be performed PRIOR to cleaning: To avoid electrical shock, be sure all electric power is turned off before cleaning. In some installations, more than one switch may have to be turned off to completely de -energize the case. Do not spray cleaning solution or water directly on fan motors or any electrical connections. All lighting receptacles must be dried off prior to insertion and re -energizing the lighting circuit. Please refer to the Use and Maintenance section of this installation manual. Hi//pfsoorsix Tel: 1-804-526-4455 1925 Ruffin Mill Rd, Colonial Heights, VA 23834 Ni//phoersix, Due to our commitment to continuous improvement, all specifications are subject to change without notice. Hillphoenix is a Sustaining Member of the American Society of Quality. Visit our website at www.hillphoenix.com 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door JNRBH Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood GENERAL NOTES: • 6-foot cases are french door, consisting of 3 (24") doors. • 8-foot case are french door, consisting of 4 (24") doors. • 12-foot cases are french door, consisting of 6 (24") doors. • Lighting controls - occupancy sensors are optional. SHIPPING WEIGHT Case Weight JNRBH - 2017 000 NSF c&us COMPLIANT = COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS Hi//phoersix a = company 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door J N R B H Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood ELECTRICAL DATA Case Length Fans Per Case High Efficiency Fans 120 Volts Amps Watts 2 Door 1 0.34 22.5 3 Door 2 0.68 45.0 4 Door 2 0.68 45.0 5 Door 3 1.01 67.5 6' 2 0.44 53 8' 2 0.44 53 12' 3 0.66 79 LIGHTING DATA Case Length Door Size OP7 Single Swing OP7 French Swing 120 Volts 120 Volts Amps Watts Amps Watts 2 Door 30" 0.28 33.0 --- --- 3 Door 30" 0.41 49.2 --- 4 Door 30" 0.55 65.4 --- 5 Door 30" 0.68 81.6 --- --- 6' 24" --- --- 0.44 52.3 8' 24" --- --- 0.44 52.3 12' 24" --- --- 0.64 76.6 ANTI CONDENSATE DATA Case Length Door Size 101 Frames Vista Frames Un Heated Doors Un Heated Doors ELMD, 190 160 120 Volts 120 Volts Amps Watts Amps Watts 2 Door 30" 0.36 43 0.36 43 3 Door 30" 0.55 66 0.55 66 4 Door 30" 0.75 90 0.75 90 5 Door 30" 0.94 113 0.94 113 6' 24" 0.39 47 0.39 47 8' 24" 0.43 52 0.43 52 12' 24" 0.68 82 0.68 82 2017 DOE NSF c �L us COMPLIANT � COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS Hi//phoersix a = company 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door J N R B H Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood GUIDELINES AND CONTROL SETTINGS {DIRECT EXPANSION HFC/CO2} Application Case Length Door Size Refrigeration Load Per Door (BTU/H) Superheat Set Point @ Bulb (OF) Evaporator (OF) Discharge Air (OF) Discharge Air Velocity (FPM) Conventional Parallel Bakery/Dairy/Cut Produce/Deli 2 - 5 Door 30" 602 572 6-8 30 37 230 Bakery/Dairy/Cut Produce/Deli 6' 24" 400 394 6-8 30 37 230 Bakery/Dairy/Cut Produce/Deli 8' 24" 400 394 6-8 30 37 230 Bakery/Dairy/Cut Produce/Deli 12' 24" 400 394 6-8 30 37 230 Beverage 2 - 5 Door 30" 560 532 6-8 34 39 230 Beverage 6' 24" 392 386 6-8 34 39 230 Beverage 8' 24" 392 386 6-8 34 39 230 Beverage 12' 24" 392 386 6-8 34 39 230 Meat/Seafood 2 - 5 Door 30" 641 609 6-8 28 33 230 Meat/Seafood 6' 24" 480 443 6-8 28 33 230 Meat/Seafood 8' 24" 480 443 6-8 28 33 230 Meat/Seafood 12' 24" 480 443 6-8 28 33 230 DEFROST CONTROLS {DIRECT EXPANSION HFC/CO2} Defrosts Per Day Timed -Off Defrost Fail -Safe (Min) Termination Temp (OF) 2 46 1 39 NOTES: • --" indicates that this feature is not an option on this case model and/or the data is not yet available yet. • Anti -condensate heat values represent a door with no glass heat. • Listed discharge air velocity represents the average velocity at the peak of defrost using a Testo 410i Anemometer. • Temperature and defrost settings listed above are recommended start-up settings. Final operational settings may need to be adjusted for the store conditions in which the case operates. • The recommended evaporator temperatures may need to be adjusted based on system setup, store conditions, etc. The minimum recommended evaporator temperature is 40F below the listed evaporator temperature. • Discharge air temperature values represent readings taken within the upper air channel immediately behind/upstream of the honeycomb. • For optimal performance in HFC applications, it is recommended to close the liquid line and close the suction line during defrost. Defrost parameters may need to be adjusted if other methods are used. • Data listed for the 6', 8', and 12' case models are preliminary values and may be subject to change once final testing is completed. 2017 00E NSF c �L us COMPLIANT = COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS oersix a a company 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door J N R B H Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood DOOR OPTIONS I FRONT OPTIONS STANDARD SWING DOOR 2, 3, 4, & 5 - DOOR CASES L 30" [76.2 cm] J FRENCH DOOR 6'. 8' & 12' CASES 24" [61.0 cm] 24" [61.0 cm] 2017 DOE NSF c �L us COMPLIANT � COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. FLAT FRONT IONT PANEL .1. ;KPLATE PRELIMINARY JNRBH Rev. Date Rev. # Rev. Title 02-01-24 5 DATA UPDATE 11-09-23 4 CASE OPTIONS Hi//phoersix a = company JNRBH 2, 3, 4 & 5 Door / 6', 8' & 12' High Narrow Reach -In Glass Door Beverage/Bakery/Dairy/Cut Produce/Deli/Meat/Seafood TOP W IRING —\ I 31 1/4" [79.4 cm] 22" H x x (7 x 022" a = C7 C7 w I 0 W w x x w x o W x x W Z LD jr 22" ¢ O 6p a U x 0) W z 0 T LL U) Er V 22" 22" cE O m v U � O U N p N 7 m N 0ao V O N f0 22" W M N I 00 O N 0 'D 23 1/4" [59.1 cm] (`7 ((00 (00 COIL of gnu inn I T U 6 3/8" [16.2 cm] N c6 SD 24 1/2" [62.2 cm] r oD 30 7/8" [78.4 cm] n 34 5/8" [87.9 cm] 36 5/8" [92.9 cm] 7" 17.8 cm] 5" [12.7 cm] WIRING TO THE TOP REAR REFRIGERATION (14" X 10" X 4") 2" MINIMUM AIR GAP PIPING TO THE TOP LOCATED 10 5/8" ABOVE FINISH FLOOR U U U U N (EJ n O O U U N W o6 m n m T W (V W 7 V Cal � DEFAULT WIRING TO BOTTOM REFRIGERATION (OPTIONAL) 1 1/2" PVC DRAIN CONNECTION 60" [152.4 cm] (2 Door) 8 3/4" [22.2 cm] 90" [228.6 cm] (3 Door) 1 1/2" [3.8 cm] {END} 120" [304.8 cm] (4 Door) 150" [381.0 cm] (5 Door) 72" [182.9 cm] (6') 96" [243.8 cm] (8') 144" [365.8 cm] (12') NOTES: STUB -UP AREA. RECOMMENDED STUB -UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS. DRAIN LOCATION FROM CENTERLINE CASE LENGTH 2DR 3DR 4DR 5DR 6' 8' 12' X 0" 0.5' 0„ 0'. --- --- • Ends add approximately 1 " to case height, 1/2" to the back & 1 " to the front. 2 0 1 7 NSF. c �L us PRELIMINARY DOE JNRBH COMPLIANT = COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 Rev. Date Rev. # Rev. Title SPECIFICATIONS. HILLPHOENIX REFRIGERATED Hi//phoerijX DISPLAY CASES FOR SALE IN THE UNITED STATES 02-01-24 5 DATA UPDATE a = company MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. 11-09-23 4 CASE OPTIONS I SG M FOOD RETAIL Photo may depict options not included on standard models. +,f�f Y t«�\ �h�i•:i �_: l •4'w,' Model SGM Service Single -Deck SLIDING\ 247116 in REAR LOAD DOORS \ [62.1 cm] 23 1/4 in [59.1 cm] 251/2 in [64.8, cm] 16 9116 in 49 1131718 [42.1 cm] /16 in [126.3 cm] [81.0 cm]� 25 9116 in [65.Q cm] 10 in 5.4 cm] ELECTRICAL BOX-/ L— 5 314 in [14.6 in 36 112 45 3/16 [114.8 c 21 314 in [55.2 cm] Please consult Hillphoenix Engineering Reference Manual for dimensions, plan views and technical specifications. Specifications subject to change without notice. Designed for optional performance in store environments where temperature and humidity do not exceed 75' F and 55% R.H. Certified to UL 471 and ANSI/NSF Standard 7. Base Model Features C-frame with Bullet Leg Construction. Standard 50"H with 10"H base frame height. Exterior: Painted metal, including lower front panel above base. Stainless steel base trim, front and sides. Stainless steel exterior trim. Painted metal outside back and rear base trim. Stainless steel top sill. Clear rear load doors with black frames. 26"H - 7/8" thermopane, insulated regular -glare flat fixed front full length glass. Stainless steel interior. Interior trim to match interior. Black plastic coil covers with fixed black wire rack. Clearvoyant LED dual canopy lighting. Rear electrical box mounted behind the lower rear panel, customer left. Oversized gravity coil meat model. Solar digital thermometer. Remote DX refrigeration package. II FOOD RETAIL Available Options Available lengths: 4', 6', 8' and 12'. Case heights available: 52" and 54". Alternate flexible base heights include: 8", 10", 12" and 14"H. Extruded polymer base trim. Painted metal base trim. Master with nose bumper. Cart bumper (for flat front profile). Exterior stainless steel finish. Solid surface or stone case top. Integrated case top scale stand. Adjustable scale stand. White plastic coil covers. Adjustable wire racks. Reflective rear load doors. 30"H - 7/8" thermopane, insulated regular -glare flat fixed front full length glass. Rear flip -up work boards. ISO outlet/CON outlets. Solid interior mirror polish stainless steel, thermal glass divider or glass ends. Remote glycol or CO2 refrigeration packages. NSF UL os woe ® COMPLIANT COMPONENT Dover Food Retail Conyers, GA USA yiIIp/7o- L ix 844.591.5937 hillphoenix.com 02020 Hillphoenix, Inc. S01_SGM_vO820 SGMmRG DELI/MEAT/SEAFOOD To ensure proper functionality and optimum performance, it is STRONGLY recommended that Hillphoenix specialty cases be installed/serviced by qualified technicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-authorized installation/service contractors, please visit our website at www.hillphoenix.com. Hi//p/`s o e" ix® NSFR c#L 2 0 17 A DOVER COMPANY US DOE COMPLIANT COMPONENT 02/21 Hi//p/toeryix® A DOVER COMPANY LIABILITY NOTICE For Cases with Shelf Lighting Systems Hillphoenix does NOT design any of its shelf lighting systems or any of its display cases with shelf lighting systems for direct or indirect exposure to water or other liquids. The use of a misting system or water hose on a display case with a shelf lighting system, resulting in the direct or indirect exposure of the lighting system to water, can lead to a number of serious issues (including, without limitation, electrical failures, fire, electric shock, and mold) in turn resulting in personal injury, death, sickness, and/or serious property damage (including, without limitation, to the display itself, to the location where the display is situated [e.g., store] and to any surrounding property). DO NOT use misting systems, water hoses or other devices that spray liquids in Hillphoenix display cases with lighted shelves. If a misting system or water hose is installed or used on a display case with a shelf lighting system, then Hillphoenix shall not be subject to any obligations or liabilities (whether arising out of breach of contract, warranty, tort [including negligence], strict liability or other theories of law) directly or indirectly resulting from, arising out of or related to such installation or use, including, without limitation, any personal injury, death or property damage resulting from an electrical failure, fire, electric shock, or mold. PO79211M, REVO R-744 (CO2) NOTICE For Systems Utilizing R-744 (CO2) Refrigerant For refrigeration units that utilize R-744 (CO2), pressure relief and pressure -regulating relief valves may need to be installed based on the system capacity. The valves need to be located such that no stop valve is posi- tioned between the relief valves and the parts or section of the system being protected. When de -energizing refrigeration units containing R-744 (CO2), venting of the R-744 (CO2) refrigerant may occur through the pressure regulating relief valves. These valves are located on the refrigeration system and not on the case model. If venting does occur, the valve must not be defeated, capped, or altered by any means. WARNING: Under no circumstances should any component be replaced or added without consulting Hill - phoenix Field Service Engineering. Utilizing improper components may result in serious injury to persons or damage to the system. Important At Hillphoenix°, the safety of our customers and employees, as well as the ongo ing performance of our products, are top priorities. To that end, we include impor- tant warning messages in all Hillphoenix installation and operations handbooks, accompanied by an alert symbol paired with the word "DANGER", "WARNING", or "CAUTION". All warning messages will inform you of the potential hazard; how to reduce the risk of case damage, personal injury or death; and what may happen if the in- structions are not properly followed. 1 � . Indicates an immediate threat of death or seri- ous injury if all instructions are not followed carefully. 1 - Indicates apotential threat of death or serious injury if all instructions are not followed care- fully. 1 Indicates that failure to properly follow instruc- tions may result in case damage. iv Revision History • new manual format_08/11 • endviews_12/12 • parts list and dixell operating instructions_01/13 • energy data_03/13 • parts list_12/13 • energy data_03/14 • endviews_09/14 • support diagram and parts list_02/15 • warranty_04/16 • DOE, CV4 energy data, endview/diagram updates, LED lighting, fan/coil content, Dixell operating instructions removal, electrical hookups, piping locations, bolt locations, wiring diagrams and parts I ist_06/ 18 • multi -case bolt locations, UL cord/plug "same type" statement and warranty_10/19 • technical reference_02/21 u SGM-RG Service Single -Deck Merchandiser w/ Flat Fixed Glass 4', 6', 8', 10' & 12' (Deli/Meat/Seafood) GENERAL NOTES: • -- " Indicates that the feature is not an option on this case model and/or the data is not yet available at this time. SHIPPING WEIGHT Case Weight SGM-RG I --- 2017 DOS NSF c L asAN 7 ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. SGM-RG Rev. Date Rev. # Rev. Title 11-09-20 1 NEW STANDARDS Clearv^yank Hi//pl�oe�ix 2 SGM-RG Service Single -Deck Merchandiser w/ Flat Fixed Glass 4', 6', 8', 10' & 12' (Deli/Meat/Seafood) ELECTRICAL DATA Fans High Efficiency Fans Anti -Condensate Fans Drain Heaters Optional Defrost Heaters Case Per 120 Volts 120 Volts 120 Volts 208 Volts 240 Volts Length Case Amps Watts Amps Watts Amps Watts Amps Watts Amps Watts 4' --- --- --- --- --- --- --- --- --- --- --- 6' --- --- --- --- --- --- --- --- --- --- 8' --- --- --- --- --- --- --- --- --- --- --- 10' --- --- --- --- --- --- --- --- --- --- --- 12' --- --- --- --- --- --- --- --- --- --- --- LIGHTING DATA Case Length Lights Per Row Light Length Clearvoyant 4 LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps Watts Amps Watts 4' 1 4' 0.05 5.9 0.12 14.9 6' 2 3' 0.08 9.4 0.20 23.8 8' 2 4' 0.10 11.8 0.24 29.8 10, 2 5' 0.12 15.0 0.30 37.0 12' 3 4' 0.15 17.7 0.36 44.7 GUIDELINES AND CONTROL SETTINGS (DX) BTUH/ft Superheat Set Point @ Bulb (°F) Evaporator (°F) Discharge Air (°F) Discharge Air Velocity (FPM) Conventional Parallel 26" Glass 168 150 6-8 22 28 --- 30" Glass 216 200 6-8 20 28 --- NOTES: • -- " Indicates that the feature is not an option on this case model and/or the data is not yet available at this time. • Listed discharge air velocity represents the average velocity at the peak of defrost. • Glycol supply of 20°F has a propylene glycol mixture of 35% concentration by weight. • Glycol supply of 25°F has a propylene glycol mixture of 30% concentration by weight. • Units equipped with RH systems require 2 defrosts per day with a fail-safe of 120 minutes. • Listed data is based on the factory recommended default fresh meat temperature settings. • Shelves are not recommended for fresh meat applications. 2017 D OBE NSF cL us N. ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. SGM-RG Rev. Date Rev. # Rev. Title 11-09-20 1 NEW STANDARDS Clearv.,^yan Hi//p/`soersix SGM-RG Service Single -Deck Merchandiser w/ Flat Fixed Glass GUIDELINES AND CONTROL SETTINGS (GLYCOL) Case Length BTUH/ft Glycol Supply (°F) Glycol Pressure Drop (PSIG) Coil Volume (gal) 20oF 25°F 20°F 25°F 26" Glass 4' --- --- --- 1.5 --- 1.7 26" Glass 6' --- --- --- 3.5 --- 2.5 26" Glass 8' --- --- --- 5.0 --- 3.0 26" Glass 10, --- --- --- 6.3 --- 4.5 26" Glass 12' --- --- --- 7.5 --- 5.0 30" Glass 4' --- --- --- 1.5 --- 1.7 30" Glass 6' --- --- --- 3.5 --- 2.5 30" Glass 8' --- --- --- 5.0 --- 3.0 30" Glass 10, --- --- --- 6.3 --- 4.5 30" Glass 12' --- --- --- 7.5 --- 5.0 4', 6', 8', 10' & 12' (Deli/Meat/Seafood) DEFROST CONTROLS Defrosts Per Day Run -Off Time (Min) Electric Defrost Timed -Off Defrost Hot Gas Defrost Fail -Safe (Min) Termination Temp (°F) Fail Safe (Min) Termination Temp (°F) Fail -Safe (Min) Termination Temp (°F) DX 1 --- --- --- 90 50 --- --- Glycol 2 --- --- --- 90 50 --- --- 201 7 DOE NSF II: �L w ANT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. SGM-RG Rev. Date Rev. # Rev. Title 11-09-20 1 NEW STANDARDS Clearvyant Hi//p/`soersix 2 SGM-RG SLIDING REAR LOAD DOORS ELECTRICAL BOX POWER SUPPLY E U CO M U � U N Service Single -Deck Merchandiser w/ Flat Fixed Glass 4', 6', 8', 10' & 12' (Deli/Meat/Seafood) 24 7/11 1 9� r 3� rn 3 31 7/8" [81.0 cm] ]-E E iU N O F 5 7/8" [15.0 cm] 36 3/8" [92.4 cm] 45 3/16" [114.8 cm] 26" GLASS SLIDING 247/8 REAR LOAD DOORS s'G e O N A G .-�F <�' IV E m ro U 2 N W N ¢¢J fw a, w 31 7/8" [81.0 cm] Q N Z U U N _ U E a? iD U N N N � N N N O ELECTRICAL BOX 5 7/8" [14.9 cm] 36 3/8" [92.4 cm] 45 3/16" [114.8 cm] 30" GLASS (OPTIONAL) 4 13/16" [63.0 cm] 20" [50.8 cm] 20" X 10" MECHANICAL ACCESS - TOEKICK 2017 DOE NSF c L us ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. I E I U N m M m FRONT OF CASE TOEKICK 48 [121.9 cm] {4' case] 72" [182.9 cm] {6' case] —96" [243.8 cm] {8' case] 1" [2.5 cm] 120" [304.8 cm] {10' case] 144" [365.8 cm] (12' case) SGM-RG Rev. Date Rev. # Rev. Title 11-09-20 1 NEW STANDARDS Clearv.,^yant Hi//p/`soe"F-W 5 Thank you for choosing Hillphoenix for your food merchandising needs. This handbook contains important technical information and will assist you with the installation and operation of your new Hillphoenix specialty cases. By closely following the instructions, you can expect peak performance; attractive fit and finish; and long case life. We are always interested in your suggestions for improvements (e.g. case design, technical documents, etc.). Please feel free to contact our Marketing Services group at the number listed below. Thank you for choosing Hillphoenix, and we wish you the very best in outstanding food merchandising. CASE DESCRIPTION This manual specifically covers the SGM-RG deli, meat and seafood application, service single -deck merchandiser. STORE CONDITIONS Hillphoenix cases are designed to operate in an air-condi- tioned store that maintains a 75°F (24°C) store temperature and 55% (max) relative humidity (ASHRAE conditions). Case operation will be adversely affected by exposure to excessively high ambient temperatures and/or humidity. REFRIGERATION SYSTEM OPERATION Air-cooled condensing units require adequate ventilation for efficient performance. Machine -room temperatures must be maintained at a minimum of 65°F in winter and a maximum of 95°F in summer. Minimum condensing temperatures should be no less than 70°F. SHIPPING CASES Transportation companies assume all liability from the time a shipment is received by them until the time it is delivered to the consumer. Our liability ceases at the time of shipment. RECEIVING CASES Examine fixtures carefully and in the event of shipping dam- age and/or shortages, please contact the Service Parts Department at the number listed below. CASE DAMAGE Claims for obvious damage must be 1) noted on either the freight bill or the express receipt and 2) signed by the carrier's agent; otherwise, the carrier may refuse the claim. If damage becomes apparent after the equipment is unpacked, retain all packing materials and submit a written request to the carrier for inspection within 14 days of receipt of the equipment. Failure to follow this procedure will result in refusal by the carrier to honor any claims with a consequent loss to the consumer. If a UPS shipment has been damaged, retain the damaged material, the carton and notify us at once. We will file a claim. LOST/MISSING ITEMS Equipment has been carefully inspected to insure the highest level of quality. Any claim for lost/missing items must be made to Hillphoenix within 48 hours of receipt of the equip- ment. When making a claim please use the number listed below. SERVICE & TECHNICAL SUPPORT For service or technical questions regarding specialty cases, please contact our Specialty Products Division Service Department at 1-319-293-3777. For questions regarding our refrigeration systems or electrical distribution centers, please contact our Systems Division Customer Service Department at 1-770-388-0706. CONTACTING THE FACTORY If you need to contact Hillphoenix regarding a specific fixture, be certain that you have both the case model number and serial number (this information can be found on the data tag, located on the top -left interior of the case). When you have this information, call the number below and ask for a Service Parts Representative. Hillphoenix Specialty Products 703 Franklin Street, PO Box 478 Keosauqua, IA 52565 Tel: (319) 293-3777/Fax: (319) 293-3776 Website: www.hillphoenix.com LOCATION This refrigerated display case has been designed for displaying and storing perishable food product. It is engineered for air- conditioned stores with a maximum ambient of 75 ° F and 55% relative humidity. 4 When selecting the location for placement of this case, avoid the following conditions: Excessive Air Movement 1. Doors 2. Air-conditioned vents 3. Other air sources Excessive Heat 1. Windows 2. Sun 3. Flood lamps 8 feet or less from the product 4. Other heat sources MOVING CASES Hillphoenix display cases are generally shipped to stores with casters installed on the base frame. The casters make the job of moving cases easier for everyone involved in the shipping and installation process, as well as reducing the chance of damage from raising and lowering cases with "Y' bars to place them on dollies, skates or rollers. In most situations, one or two persons can easily move the case into position. When the cases arrive at the store, simply roll them on to the store floor to the proper staging area. Occasionally, cases are shipped with longitudinal brace boards attached to help with stabilization. In these instances, the casters should not be removed until the case is in place. Removing the casters is an easy process. Simply flatten and remove the cotter pins that are holding the casters in place (Fig. 1). Then lift the case with a "Y' bar and slide the caster assemblies out. The dismantled casters can now be discarded. FLOOR PREP 1. Ask the general contractor if your current copy of the build- ing dimensions are the most recently issued. Also, ask for the points of reference from which you should take dimen- sions to locate the cases. 2. Using chalk lines or a laser transit, mark the floor where the cases are to be located for the entire lineup. The lines should coincide with the outside edges of the case feet. 3. Move case as close as possible to its permanent location. Remove all crating and shipping braces above the ship- ping pallet. Loosen the plastic dust cover from the pallet, but leave cover over the case to protect it while removing the case from the pallet. Carefully, lift case up and off the pallet. Remove dust cover. Installation hardware ships in a marked packet located inside the case. Leveling is necessary to ensure proper operation of the refrigeration system and drainage of the condensate. Locate the highest point on the positioning lines as a ref- erence for determining the proper height of the shim -pack levelers. A laser transit is recommended for precision and requires just one person. Level adjustable feet by twisting, if applicable, or shim as necessary under vertical supports as this will help ensure that the case is not settling over time. 5. Locate vertical support positions along the chalk line (Fig. 2). Spot properly leveled shim packs at each support loca- tion. Fig. 1 Cotter pin attaches caster to case l4i'];J1l]:i&� Fig. 2 Vertical supports Locate the vertical supports under unit before removing from pallet. Failure to do so will dam- age the finished metal if correct lift points are not identified prior to removal. 7 These cases are not designed for excessive external weight. Do not walk on top or inside of cases. Doing so may result in case damage and/or personal injury. LINE-UP & INSTALLATION Single Case 1. Move the case into position. Using a "Y' bar, raise the end of the case (under cross support), and lower the horizontal support on to the shim packs. Repeat on the other end of the case. Be certain that your hands and feet are out of the way before lowering the case. Failure to 5 do so may result in serious injury. 2. Once the case is properly placed on the shim packs, check the vertical plumb of the case by placing a bubble level on the rear wall. Add/remove shim packs as needed. For the horizontal level, repeat this process after placing the bubble level on the front sill. 3. Install the bumper, if applicable, into pre -attached bumper track and snap into place. 4. After sufficient time has passed to allow for bumper shrinkage, cut away the excess bumper for final fit and fin- ish. Be certain to use an appropriate cutting tool (tubing - or PVC -cutter) to ensure a smooth cut. 5. Install case shelves and reconnect lights. Be aware that differing shelf configurations will affect energy consump- tion and case performance. 6. Install toekick back onto the base of case. Multi -Case 1. Remove any shelves (discard the shelf clips) and/or loose items from the cases that may interfere with case joining. Keep all loose items as they will be used later in the instal lation process. 2. Follow the single -case installation instructions for the first case, excluding #6, then position the next case in the line. up approximately 3' away. 3. Move the second case to a position that is approximately 6" from the first case, then position case on the shim packs. 4. Push the cases tightly together, then lightly bolt them together through the holes provided (Fig. 3). Tighten all the joining bolts until all margins are equal. Be careful not to over tighten. Fig. 3 Bolt locations The stub -up location can be found under the tank on the customer left. See diagram on page 11 for access loca- tions. 6. Apply case -to -case watershed (supplied) over the end frame seam (Fig. 4). The watershed prevents water from settling in the case joint. Fig. 4 Sealing the pipe chase 7. Repeat steps 3-6 of this sequence for all remaining cases. Be certain to properly level all cases. 8. Properly align the front panels as needed, then install, if applicable, front panel trim (supplied). 9. Install the bumper into pre -attached bumper track and snap into place. 10. After sufficient time has passed to allow for bumper shrinkage, cut away the excess bumper for final fit and fin- ish. Be certain to use an appropriate cutting tool (tubing - or PVC -cutter) to ensure a smooth cut. 11. Install case shelves and reconnect lights. Be aware that differing shelf configurations will affect energy consump- tion and case performance. 12. Install toekick back onto the base of case. 1=�I Installation of 3rd-party materials may result in diminished case performance. REFRIGERATION Refrigeration connections will be made through the refrigera- tion stub up location on the customer left side of the case. Refrigeration lines may be headed together for all cases in a line-up, if necessary, by lines through the access holes with a high grade silicon to prevent recirculation. All lines must be correctly sized. See diagram on page 11 for access locations. If it becomes necessary to penetrate the case bottom for any reason, make certain it is sealed afterward with canned -foam sealant and white RTV. � 7certai!nthait7all piping connections are com- oaodes. 1=11 If any brazing is necessary, place wet rags around the area to avoid tank damage. PLUMBING The drain outlet or "P" trap (Fig. 5) is shipped loose with the case and made from a 1 1/2" PVC pipe. Care should be given to ensure that all connections are water -tight and sealed with the appropriate PVC or ABS cement. Fig. 5 "P" trap / drain outlet Drain lines can be run left or right of the tee with the proper pitch to satisfy local drainage requirements. When connecting the PVC to the existing floor drains be sure to provide as much downhill slope as possible and avoid long runs of drain lines. Do not install condensate drains in contact with non -insulated suction lines in order to prevent condensate from freezing. Install the 1 1/2" PVC trap, which is provided with the case. All drains must be trapped. Before operating the case, be certain to remove the styrofoam shipping block that protects the plumbing lines during ship- ping. 1 � 7Becertain that all plumbing connections are liant with local codes. Be sure to remove all styrofoam shipping blocks from piping and refrigerant lines. Failure to do so may result in case damage. ELECTRICAL Electrical hookups are made through the power supply box that can be accessed by removing the rear panel. For case -to -case wiring, run conduit between the power supply boxes or run wiring through the raceway. When connecting to the power supply on the case, field wiring should exit box from the side furthest away from case wiring to allow more room in- side for wiring connections. Always check the data tag located on left end exterior panel or top interior of the case. The case must be grounded. For more detailed electrical wiring informa- tion (see Appendix Al). 1 � Be certain that all electrical connections are compliant with local codes. CAUTION, RISK OF ELECTRIC SHOCK. If the cord or plug becomes damaged, replace only with a cord and plug of the same type. 10 MECHANICAL ACCESS LOCATIONS POWER SUPPL 1 2 1/4 in 15 in [5.7 cm] [38. cm] 34 3/16 in [86. cm] 45 3/16 in [114.0 cm] 3/4 in [1.9 cm] 24 in [61.0 cm] (4') -36 in [91.4 cm] (6' & 72 in [182.9 cm] (12') 2413/16 in [63.0 cm] 20 in [50.8 cm] 11 1/4 in [28.6 cm] I� 20" x 10" RECOMMENDED ELECTRICAL STUB UP LOCATION DRAIN CONNECTION FRONT OF CASE -48 in[121.9 cm] {4' case)- 72 in [182.9 cm] (6' case) 96 in [243.8 cm] (8' case) 144 in [365.8 cm] {12' case) TOEKICK 36 3/8 in 92.§ cm] 3/4 in [1.9 cm] 11 GENERAL LIGHTING INFORMATION Hillphoenix cases are equipped with LED luminaires and fea- ture specially designed light reflectors in the cornice to improve the illumination of products. LED power supplies operate both the cornice and shelf lights and are located above the cornice reflectors. The lighting system has an ON/OFF switch located in the race- way, power box or at the inside back of the case. Once a case has been properly positioned in the store and an electrician has connected the lighting circuit, the lights may be turned on to verify that they are connected and functioning properly. To ensure peak performance, it is advisable to run the lighting systems only when the store climate control is on and case refrigeration is started. Note: It is highly recommended that the ambient store temperature not exceed 80OF. SHOCK HAZARD Always disconnect power to case when cleaning, servicing or configuring components of the light- ing system. Failure to do so may result in serious injury or death. Using improper DC power supplies may damage the luminaires, resulting in sub -standard opera- tion and increased chances of safety issues/ injury. Never replace a 24V DC power supply with a T8 or T5 ballast of any kind! Ballasts use alternating current (AC) instead of direct current (DC) and operate at a much higher voltage than is used by this LED system. Doing so will damage the LED system and increases the chance of safety issues/injury. LED DRIVER/POWER SUPPLY BOX To gain access to the LED driver or power supplies remove the rear panel (Fig. 6). The power supply can be located at the cus- tomer left side of the case. REPLACING LED LIGHTS Once store power is connected and the light circuit is ener- gized, the Clearvoyant LED system should operate without the need for any significant maintenance for several years. Should a power supply need to be removed and/or replaced, turn off the power to the case before proceeding. Be certain to replace the power supply with genuine Hillphoenix parts or a compa- rable UL-listed Class-2 rated regulated 24V DC power supply with 10OW output capacity. Fig. 6 LED driver / power supply box LED LUMINAIRES Removing LED luminaires: 1. Unplug the luminaire. 2. Remove the screws from the light clamps (Fig. 7) while keeping ahold of the light. Once the screws are removed the light rod will come away from the case with the clamps still holding to the light. 3. Remove the closed clamps and inner rings (Fig. 8) by un- clipping the clamp ends located above the screw opening. This will release the grip around the inner ring (Fig. 9) and allow for the two pieces to be separated from one another. 4. Carefully remove the inner rings from around the light rod. Fig. 7 LED light & ring/ clamp 12 1 � , Too much tension on the inner clamp rings while removing them from an LED light rod may cause breakage. Use only enough tension for removal. Fig. 8 Closed clamp Fig. 9 Open clamp Re -installing LED luminaires: 1. Place a ring (Fig. 10) around each end of the light rod and rotate until both edges of the rod line-up and snap ahold to the ridges in the ring. 2. Slide a clamp (Fig. 10) over each ring and close them tight around the rings by clipping together the clamp ends located above the screw opening. 3. Line-up the closed clamps (Fig. 8) and light rod with the existing screw holes on the case and re -attach. 4. Rotate the light rod into desired position after the clamps are firmly re -attached. Fig. 10 LED ring and clamp 13 Before powering -up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and compliance with warranty terms. ❑ Have you thoroughly examined the case for shipping damage? (see pg. 6) ❑ Have you checked the vertical plumb of the case? The horizontal level? (see pg. 8) ❑ Have you applied the sealant to the end breakers of adjoining cases? (see pg. 8) ❑ Have you sealed the case -to -case joints by applying caulk and acrylic tape to the end frame seam? (see pg. 8) ❑ Have you installed the toekick? (see pg. 8) ❑ Have you removed the shipping blocks from the refrigeration and plumbing lines? (see pg. 10) After powering -up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and compliance with warranty terms. 1. Check all lights to ensure they are all functioning properly. 2. Check case temperature and adjust controller as needed. 14 AIRFLOW & PRODUCT LOAD Hillphoenix cases provide maximum product capacity within the refrigerated air envelope. Please keep products within the ap- propriate load limit. It is important that you do not overload the food product display so that it impinges on the airflow pattern (Fig. 11). Overload- ing will cause malfunction and the loss of proper temperature levels. Mg. 11 AIrrIOW pattern Always keep product within the designated air curtain. Failure to do so may result in case malfunction and product losing proper tempera- ture, resulting in sub -standard operation and increased chances of food contamination. DEFROST & TEMPERATURE CONTROLS Cases are equipped with either Electric, Hot Gas or Timed -Off defrost at the owner's option. The hot gas defrost termination sensor bulb and probe are attached to the dump line which is in the front, left-hand side of the case. DETERMINING SUPERHEAT To identify proper superheat settings, complete the following: 1. Obtain suction pressure from access port; obtain suction line temperature from area near TXV bulb at the outlet of evaporator coil. 2. Using the suction pressure reading, convert pressure to temperature using temperature pressure chart (see Appendix 81). 3. Finally, subtract the converted temperature reading from the actual temperature reading for superheat setting. 15 CASE CLEANING A periodic clean ingschedule should be established to maintain proper sanitation, insure maximum operating efficiency, and avoid the corrosive action of food fluids on metal parts that are left on for long periods of time. We recommend cleaning once a week. Further suggestions for case cleaning include the fol- lowing: • To avoid shock hazard, be sure all electrical power is turned off before cleaning. In some installations, more than one disconnect switch may have to be turned off to completely de -energize the case. • All surfaces pitch downward to a deep -drawn drain trough, funneling liquids to the center of the case where the waste outlet is located for easy access. Check the waste outlet to insure it is not clogged before starting the cleaning process and avoid introducing water faster than the case drain can carry it away. • To clean the LED luminaires, shut off the lights in the case, then wipe the luminaires down with a soft, damp cloth. Avoid using harsh or abrasive cleaners as they may dam- age the lights. Be certain that the luminaires are complete- ly dry before re -energizing. • Clean from top to bottom when cleaning the display case to avoid cross contamination. • If any potentially harmful cleaners are used, be certain to provide a temporary separator (e.g., cardboard, plastic wrap, etc.) between those cases that are being cleaned and those that may still contain product. • Avoid spraying any cleaning liquids directly on the electrical connections. • Allow cases to be turned off long enough to clean any frost or ice from coil and pans. • Remove toekick and clean underneath the case with a broom and a long -handled mop. Use warm water and a dis- infecting cleaning solution when cleaning underneath the cases. SHOCK HAZARD Always disconnect power to case when servicing or cleaning. Failure to do so may result in serious injury or death. Rear Load Doors 1. Remove the rear sliding doors on the back of the case and clean. To remove: push up and pull out (Fig. 12). 2. Use a spray bottle filled with an approved mild detergent and warm water. 3. Use a clean, disposable cloth (approved item) to thorough- ly clean all areas of the case. 4. Wipe down doors with a clean, disposable cloth (approved item) 5. Place the cleaned doors on a clean sanitized surface until they are dry. Fig.12 Rear load door removal 16 0 Anthony" THIS DOCUMENT CONTAINS IMPORTANT INFORMATION ABOUT CLEANING YOUR ULTRAVISIONO ANTI -REFLECTIVE GLASS! PLEASE READ AND FOLLOW THESE INSTRUCTIONS TO PREVENT DAMAGE TO THE ANTI -REFLECTIVE COATINGS. SOVIS ULTRAVISION° tempered glass specialized Anti -Reflective coatings on each surface of the glass. These coatings reduce the glare from lighting so that the products on display are more visible to your customers. While the Anti -Reflective coatings are durable, they are susceptible to scratching if abrasive materials are used for cleaning. Once the glass surfaces are scratched, it is impossible to restore the original finish. Special care must be taken to prevent damage when cleaning the glass. SOVIS recommends the following products for routine cleaning of ULTRAVISION° Anti -Reflective glass: Cleaning Cloths — two products are recommended... • Scotch-Briteo High Performance Cloth — manufactured by 3M°and available in most grocery stores under the name Scotch-Briteo Microfiber Cleaning Cloth in a 12" x 14" size. This cloth is washable and may be reused as long as it remains clean. • Spontex° Microfibre Cleaning Cloth — distributed by Spontex° and available in most grocery stores under the same name in a 15.75" x 12" size. This cloth is washable and may be reused as long as it remains clean. Cleaning Fluid — for more difficult cleaning jobs, these products are recommended... • Windex° - standard product only (extra -strength or specialty products may not be suitable) • Glass -Plus° - standard product only (extra -strength or specialty products may not be suitable) • Exceed° Multi -Surface & Glass Cleaner — from Kay Chemical Company, Greensboro, NC • Warm Water Note: equivalent store -brand glass cleaning products are normally acceptable substitutes to the brand name products listed above. The cleaning cloths named above will normally remove dust, grease, oil, and fingerprints without the need for cleaning fluids. A light spray of the cleaning fluids listed above will reduce the time required for cleaning. These materials have been tested and proven to clean ULTRAVISION° glass without scratching or damaging the Anti -Reflective coatings. If you need assistance with obtaining these materials, please contact your display case supplier. Under no circumstances should the following types of materials be used for cleaning glass with ULTRAVISION° Anti -Reflective coatings. • Coarse Paper Towels • Scouring Pads or Powders • Steel Wool or Steel Fiber Materials Do not use these materials for cleaning glass. • Blades • Acidic or highly Alkaline detergents go • Fluorine based detergents 17 Contact the Service Parts Department at: 319-293-3777 Provide the following information about the part you are ordering: • Model number and serial number* of the case for which the part is intended. • Length of the part (if applicable). • Color of part (if painted) or color of polymer part. • Whether part is for left or right-hand application. • Quantity *Data tag is located on the left end exterior panel or top interior of the case. If the parts are to be returned for credit, contact the Parts Department. Do not send parts without authorization. IN Al.................................................................................................... Wiring Information B1...................................................................... Sporlan Pressure -Temperature Chart Cl.................................................................................................................... Parts List Al: WIRING DIAGRAM Vacuum -Inches of Mercury `70 N TEMPERATURE PRESSURE CHART - at sea level Bold Italic Figures TEMPERATURE REFRIGERANT SPORLAN CODE (°F) (°C) 134a (J) 404A (S) 507 (P) 717 (A) 744-0O2 -60 -51.1 21.8 7.3 5.8 18.6 79.9 -55 -48.3 20.3 3.9 2.2 16.6 91.1 -50 -45.6 18.7 0.1 0.9 14.3 103.4 -45 -42.8 16.9 2.0 3.0 11.7 116.6 -40 -40.0 14.8 4.3 5.4 8.8 131.0 -35 -37.2 12.5 6.8 8.1 5.4 146.5 -30 -34.4 9.8 9.6 11.0 1.6 163.1 -25 -31.7 6.9 12.7 14.1 1.3 181.0 -20 -28.9 3.7 16.0 17.6 3.6 200.2 -18 -27.8 2.3 17.4 19.1 4.6 208.3 -16 -26.7 0.8 18.9 20.6 5.6 216.5 -14 -25.6 0.4 20.4 22.2 6.7 225.0 -12 -24.4 1.1 22.0 23.8 7.8 233.8 -10 -23.3 1.9 23.6 25.5 9.0 242.7 -8 -22.2 2.8 25.3 27.3 10.3 251.9 -6 -21.1 3.6 27.0 29.1 11.5 261.3 -4 -20.0 4.6 28.8 30.9 12.9 271.0 -2 -18.9 5.5 30.7 32.8 14.3 280.9 0 -17.8 6.5 32.6 34.8 15.7 291.0 1 -17.2 7.0 33.6 35.8 16.4 296.2 2 -16.7 7.5 34.6 36.9 17.2 301.5 3 -16.1 8.0 35.6 37.9 18.0 306.8 4 -15.6 8.5 36.6 39.0 18.8 312.1 5 -15.0 9.1 37.7 40.1 19.6 317.6 6 -14.4 9.6 38.7 41.1 20.4 323.1 7 -13.9 10.2 39.8 42.3 21.2 328.6 8 -13.3 10.8 40.9 43.4 22.1 334.2 9 -12.8 11.3 42.0 44.5 22.9 339.9 10 -12.2 11.9 43.1 45.7 23.8 345.7 11 -11.7 1 12.5 44.3 46.9 24.7 1 351.5 TEMPERATURE REFRIGERANT SPORLAN CODE (°F) (°C) 134a (J) 404A (S) 507 (P) 717 (A) 744-0O2 12 -11.1 13.1 45.4 48.1 25.6 357.4 13 -10.6 13.8 46.6 49.3 26.5 363.4 14 -10.0 14.4 47.8 50.5 27.5 369.5 15 -9.4 15.0 49.0 51.8 28.4 375.6 16 -8.9 15.7 50.2 53.0 29.4 381.8 17 -8.3 16.4 51.5 54.3 30.4 388.0 18 -7.8 17.0 52.7 55.6 31.4 394.3 19 -7.2 17.7 54.0 56.9 32.4 400.7 20 -6.7 18.4 55.3 58.3 33.5 407.2 21 -6.1 19.1 56.6 59.6 34.6 413.8 22 -5.6 19.9 58.0 61.0 35.7 420.4 23 -5.0 20.6 59.3 62.4 36.8 427.1 24 -4.4 21.3 60.7 63.8 37.9 433.8 25 -3.9 22.1 62.1 65.3 39.0 440.7 26 -3.3 22.9 63.5 66.7 40.2 447.6 27 -2.8 23.7 64.9 68.2 41.4 454.6 28 -2.2 24.5 66.4 69.7 42.6 461.7 29 -1.7 25.3 67.8 71.2 43.8 468.8 30 -1.1 26.1 69.3 72.7 45.0 476.1 31 -0.6 26.9 70.8 74.3 46.3 483.4 32 0.0 27.8 72.4 75.9 47.6 490.8 33 0.6 28.6 73.9 77.5 48.9 498.3 34 1.1 29.5 75.5 79.1 50.2 505.8 35 1.7 30.4 77.1 80.7 51.6 513.4 36 2.2 31.3 78.7 82.4 52.9 521.2 37 2.8 32.2 80.3 84.1 54.3 529.0 38 3.3 33.1 82.0 85.8 55.7 536.9 39 3.9 34.1 83.7 87.5 57.2 544.8 40 4.4 35.0 85.4 89.2 58.6 552.9 41 1 5.0 1 36.0 87.1 91.0 1 60.1 1 561.0 Pressure -Pounds Per Square Inch Gauge TEMPERATURE REFRIGERANT SPORLAN CODE (°F) (°C) 134a (J) 404A (S) 507 (P) 717 (A) 744-0O2 42 5.6 37.0 88.8 92.8 61.6 569.3 43 6.1 38.0 90.6 94.6 63.1 577.6 44 6.7 39.0 92.4 96.5 64.7 586.0 45 7.2 40.1 94.2 98.3 66.3 594.5 46 7.8 41.1 96.0 100.2 67.9 603.1 47 8.3 42.2 97.9 102.1 69.5 611.7 48 8.9 43.2 99.8 104.1 71.1 620.5 49 9.4 44.3 101.7 106.0 72.8 629.3 50 10.0 45.4 103.6 108.0 74.5 638.3 55 12.8 51.2 115.3 118.3 83.4 684.4 60 15.6 57.4 126.0 129.2 92.9 733.1 65 18.3 64.0 137.3 140.7 103.2 784.2 70 21.1 71.1 149.3 153.0 114.2 838.1 75 23.9 78.7 162.0 165.9 125.9 894.9 80 26.7 86.7 175.4 179.6 138.4 954.9 85 29.4 95.2 189.5 194.1 151.8 1018 90 32.2 104.3 204.5 209.3 166.1 ** 95 35.0 113.9 220.2 225.4 181.2 ** 100 37.8 124.2 236.8 242.3 197.3 ** 105 40.6 135.0 254.2 260.1 214.4 ** 110 43.3 146.4 272.5 278.8 232.5 ** 115 46.1 158.4 291.8 298.5 251.6 ** 120 48.9 171.2 312.1 319.2 271.9 ** 125 51.7 184.6 333.3 340.9 293.3 ** 130 54.4 198.7 355.6 363.8 315.8 ** 135 57.2 213.6 379.1 387.8 339.6 ** 140 60.0 229.2 403.7 413.0 364.7 ** 145 62.8 245.7 429.6 439.5 391.0 ** 150 65.6 262.9 456.8 467.4 418.7 ** 155 1 68.3 12811.0 1485.5 1497.0 1447.8 1** To determine subcooling for R-404A use BUBBLE POINT values (Temperatures above 507 - Gray Background); to determine superheat for R-404A, use DEW POINT values (Temperatures 507 and below). ** = exceeds critical temperature FORM IC-11-09 COPYRIGHT 2009 BY SPORLAN VALVE COMPANY, WASHINGTON, MO 63090 Printed in U.S.A. n 2 a Cl: PARTS LIST A Drain Trough B Light Guard C Case Top D Front Fixed Glass E Die Board F Front Toekick G Insulated Drain Pan H End Panel Trim I End Panel J End Toekick K Outside Back L Electrical Box M Bottom Deck N Inside Back 0 Sliding Rear Load Doors P Strut Q Gravity Coil Hi//p/�oerip ix. A OOYER , OMPANv Hill PHOENIX, Inc. Hereinafter Referred To As Manufacturer LIMITED WARRANTY GENERAL WARRANTY Manufacturer's products are warranted to be free from defects in materials and workmanship under normal use and maintenance for fourteen months from date of shipment from manufacturer (the "Base Warranty Period"). In the event of a qualifying warranty claim, a new or rebuilt part to replace any defective part will be provided without charge. The replacement part is covered under this warranty for the remainder of the applicable Base Warranty Period. In order to be eligible for warranty coverage, customer must: (i) notify Manufacturer promptly upon discovery of a warrant defect, and (ii) comply with the warranty claim procedures provided by Manufacturer from time to time. This equipment warranty does not include labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing, or handling of either defective parts or replacement parts. The warranty shall not apply: 1. To any unit or any part thereof which has been subject to accident, alteration, negligence, misuse or abuse, or which has not been operated in accordance with the manufacturer's recommendations, or in conditions outside of Manufacturer's specifications, or if the serial number of the unit has been altered, defaced, or removed. 2. When the unit, or any part thereof, is damaged by fire, flood, or other act of God. 3. To products that are impaired or damaged due to improper installation. 4. When installation and startup forms are not properly completed or returned within two weeks after startup. 5. If the defective part is not returned to the Manufacturer. 6. To service, maintenance or wear and tear parts (such as lights, starters and ballasts) MODIFICATIONS TO GENERAL WARRANTY The following sets forth certain modifications to the General Warranty for specific products of Manufacturer DISPLAY CASE AND SPECIALTY PRODUCTS CLEARVOYANT® LED LIGHTING The warranty period for Clearvoyant LED lighting components within the Clearvoyant lighting system is five years from date of shipment. REMEDY LIMITATION/DAMAGES EXCLUSION THE REMEDY OF REPAIR OR PROVISION OF A REPLACEMENT PART WITHOUT CHARGE SHALL BE THE EXCLUSIVE REMEDY FOR ANY WARRANTY CLAIM HEREUNDER. WITHOUT LIMITING THE FOREGOING, MANUFACTURER SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFIT, LABOR COST, LOSS OF REFRIGERANT OR FOOD PRODUCTS. EXCLUSIVE WARRANTY THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY WITH RESPECT TO THE PRODUCTS. ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED. NO IMPLIED WARRANTY SHALL BE DEEMED CREATED BY COURSE OF DEALING OR USAGE OF TRADE. NO OTHER PERSON IS AUTHORIZED TO EXPAND OR CREATE ANY OBLIGATION GREATER THAN OR MORE EXPANSIVE THAN THE WARRANTY PROVIDED HEREIN. Submit warranty claims to: Hillphoenix Refrigeration & Power Systems Division 2016 Gees Mill Road Conyers, GA 30013 Warranty / Service Phone:1-833-280-5714 Hillphoenix Display Case Division 1925 Ruffin Mill Road Colonial Heights, VA 23834 Warranty / Service Phone: 1-833-280-5714 Hillphoenix Specialty Products Division 703 Franklin Street Keosauqua, IA 52565 Warranty / Service Phone: 1-833-280-5714 4844-3514-3187.2 Warnin Maintenance & Case Care When cleaning cases the following must be performed PRIOR to cleaning: To avoid electrical shock, be sure all electric power is turned off before cleaning. In some installations, more than one switch may have to be turned off to completely de -energize the case. Do not spray cleaning solution or water directly on fan motors or any electrical connections. All lighting receptacles must be dried off prior to insertion and re -energizing the lighting circuit. Please refer to the Use and Maintenance section of this installation manual. Hi//pftoeffsix® A OOVER COMPANY Tel: 319-293-3777 703 Franklin Street, PO Box 478, Keosauqua, IA 52565 Due to our commitment to continuous improvement, all specifications are subject to change without notice. Hillphoenix is a Sustaining Member of the American Society of Quality. Visit our website at www.hillphoenix.com �f BDMO818 •' "JV11jM ft C30 eFT o3ro OHM E NRG OHMH N NRG INCLUDES ONHM-NRG, ONHMH-NRG TM A DOVE- COMPANY SYNER� IM Clearv^ant I/ LED SYSTEM 3 To ensure proper functionality and optimum performance, it is strongly recommended that Hillphoenix display cases be installed/serviced by qualified technicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-authorized installation/service contractors, please visit our Web site at www.hillphoenix.com. NSF c �L us P087166G V 1.05 07/16 ill REVISION HISTORY DATE • •- V1.00 05/17/12 Initial manual release (new format) B. Moody V1.01 09/27/12 Added case top fascia installation material (Appendix H). B. Moody Added peg hook information material (Appendix G). V1.02 09/26/13 Added glycol information to Important Notices section. B. Moody V1.03 12/09/13 Moved light reflector joint trim installation information from Appendix and incorporated into Trim Out section of B. Moody handbook. Moved electrical data and case dimensions information from Appendix and incorporated into stand-alone sec- tions of handbook. Updated case top fascia installation instructions (Appendix H) Added electronic display module installation information (Appendix 1) V1.04 03/14/14 Added Clearvoyent and Synerg-e logos to cover page B. Moody Updated page headers Added Parts logo to General Information page Updated Lighting Systems pages Added Fresh Thinking/Responsible Solutions logo to back page V1.05 07/26/16 Updated Clearvoyent logo to C3 E. Sibitzky Added ONHM & ONHMH to manual Copyright© 2014 by Hillphoenix All rights reserved. No part of this document may reproduced or transmitted in any form or by any means —electronic or mechanical, including photocopying or recording; or any other information storage and retrieval system —without express written permission from Hillphoenix. IMPORTANT NOTICES iii PRECAUTIONARY NOTICES At Hillphoenix°, the safety of our customers and em- ployees —as well as the ongoing performance of our products —are top priorities. To that end, we designate important information in all Hillphoenix installation and op- erations handbooks with an accompanying alert symbol. All of these notices are meant to provide information about potential dangers to personal health and safety —as well as risks of case damage —if the instructions are not carefully followed. Indicates important information that is crit- ical to proper case performance. Indicates the potential threat of injury if all • instructions are not followed carefully. Indicates an immediate threat of serious injury or death if all in are not fol- lowed carefully. SERVICE NOTICE To ensure optimum case performance, we strongly recom- mended that Hillphoenix display cases be installed and serviced by qualified technicians who have experience working with commercial refrigerated display merchandis- ers and storage cabinets. For a list of Hillphoenix-autho- rized installation and service contractors, please visit our Web site: www.hillphoenix.com LIABILITY NOTICE For Cases with Shelf Lighting Systems Hillphoenix shelf lighting systems —as well as display cas- es with shelf lighting systems —are not designed to with- stand direct or indirect exposure to water or other liquids. The use of a misting system or water hose on a display case with a shelf lighting system, resulting in the direct or indirect exposure of the lighting system to water, can lead to a number of serious issues (including, without limitation, electrical failures, fire, electric shock, and mold) in turn re- sulting in personal injury, death, sickness, and/or serious property damage (including, without limitation, to the dis- play itself, to the location where the display is situated [e.g., store] and to any surrounding property). Do not use misting systems, water hoses or other devices that spray liquids in Hillphoenix display cases with lighted shelves. If a misting system or water hose is installed or used on a display case with a shelf lighting system, then Hillphoenix shall not be subject to any obligations or liabili- ties (whether arising out of breach of contract, warranty, tort [including negligence], strict liability or other theories of law) directly or indirectly resulting from, arising out of or related to such installation or use, including, without limita- tion, any personal injury, death or property damage result- ing from an electrical failure, fire, electric shock, or mold. P079211 M, REVO R-744 (CO2) NOTICE For Systems Utilizing R-744 (CO2) Refrigerant For refrigeration units that utilize R-744 (CO2), pressure re- lief and pressure -regulating relief valves may need to be installed based on the system capacity. The valves need to be located such that no stop valve is positioned between the relief valves and the parts or section of the system be- ing protected. When de -energizing refrigeration units containing R-744 (CO2), venting of the R-744 (CO2) refrigerant may occur through the pressure regulating relief valves. These valves are located on the refrigeration system and not on the case model. If venting does occur, the valve must not be de- feated, capped, or altered by any means. GLYCOL NOTICE For Systems Utilizing Glycol Refrigerant Use of glycol as a secondary refrigerant must be carried out in accordance with the instructions and procedures set forth in the Hillphoenix Second Nature Medium Tempera- ture Secondary Refrigeration Installation Manual, available online for download here: http://goo.gi/JlWd77 Additionally, Hillphoenix uses and recommends Dow gly- col -based coolants, which contain specially formulated industrial inhibitors that help to prevent corrosion in our display cases. Over time, the effectiveness of these in- hibitors deteriorates, increasing the chance for corrosion. We recommend testing of glycol solutions annually through the Dow lab. The service is free for systems containing over 250 gallons of glycol coolants, while the cost is ap- proximately $100 for smaller systems. For more informa- tion, see Dow's DOWFROST and DOWFROST HD Guide, available online for download here: http://goo.gi/v6il iQ Under no circumstance should any com- ponent be replaced or added without consulting Hillphoenix Field Service En- gineering. Utilizing improper components may result in serious injury to persons or damage to the refrigeration system. 2 OPERATING DATA OHM-NRG Electrical Data Case Length Fans Per Case High Efficiency Fans Anti -Condensate Heaters 120 Volts 120 Volts Amps Watts Amps Watts 4' 2 0.50 36 --- 1--- 6' 3 0.75 54 --- --- 8' 3 0.75 54 --- --- 12' 4 1.00 72 Lighting Data Case Length 7LightsLight Per Row Length Clearvoyant LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps I Watts Amps Watts 4' 1 4' 0.10 11.9 0.18 21.5 6' 2 3' 0.14 16.6 0.25 29.8 8' 2 4' 0.20 23.8 0.36 43.0 12' 3 4' 0.30 35.7 0.54 64.5 Guidelines & Control Settings Front Sill2 Heights 3BTUH/ft Superheat Set Point @ Bulb (°F) Evaporator' (°F) Discharges Air (°F) Discharges Air Velocity (FPM) Conventional Parallel Std. 1371 1200 6-8 27 30 200 All Others 1250 1094 6-8 27 30 200 Defrost Controls Electric Defrost Timed -Off Defrost Hot Gas Defrost Defrosts Fail -Safe Termination Fail -Safe Termination Fail -Safe Termination Per Day (min) Temp (°F) (min) Temp (°F) (min) Temp (°F) 6 --- --- 40 42 --- --- 1 NOTE: "- -" indicates that feature is not an option on this case model. 2 For meat application: extended front sills are required for maintaining proper case temperature levels (5" baseframe = 24" or higher; 11" baseframe = 30" or higher) 3 BTUH/ft notes: - Listed BTUH/ft indicate unlighted shelves. For LED lighting, add 36 BTUH per 4' lighted shelf and 27 BTUH per 3' lighted shelf to determine Total Lighting BTUH Load, then divide the Total Lighting BTUH Load by the length of the case. For T8 lighted shelves and 3rd row lighting, add 92 BTUH per 4' lighted shelf and 69 BTUH per 3' lighted shelf to determine Total Lighting BTUH Load, then divide the Total Lighting BTUH Load by the length of the case. - Add 132 BTUH/ft when aftermarket merchandising accessories are utilized to determine the total BTUH load. 4 Listed evaporator temperature indicates unlighted shelves. For lighted shelves and/or aftermarket merchandising accessories, reduce the listed evaporator temperature by 2°F. 5 Conventional Discharge Air Control — Recommended Settings: Cut -In Temp = Discharge Air + 2°F; Cut -Out Temp = Discharge Air - 2°F 6 Average discharge air velocity at peak of defrost. CASE DIMENSIONS 3 :a ;O Lu 'O 69 11/16 in [177.0 cm] :K :a 71 19/16 in J �Q [181.7 cm] 'Z �O :O 5 1/8 in [13.1 cm] 5" BASEFRAME Baseframe heights vary per order. 34 7/8 in [88.5 cm] 3rd ROW LIGHT (OPTIONAL) 16 in 13" MIRROR `,(OPTIONAL) 18 in LOAD LIMIT LINE 41 5/16 in �9 in 124.5 cm][105.0 cm] 20 in [ � STANDARD 20in !FRONT 32 1/4 in - [81.9cm] COIL 21 3/16 in TLENU [53.8 cm] 17 in [43.2 cm] � v 6 3/8 in [16.1 cm]* 31 11/16 in [80.4 cm] 38 15/16 in [98.9 cm] -43 1/4 in [109.9 cm] 4" SOLID FRONT 6" PLEXIGLAS FRONT 27 1/8 in [68.9 cm] 17 in [43.2 cm] 6" THERMOPANE FRONT 27 5/16 in [69.3 cm] 17 in [43.2 cm] �XTENDED STANDARD FRONTI WIRING TO THE TOP PIPING TO THE TOP (OPTIONAL) (OPTIONAL) O Q 4 in [10.2 cm] REFRIGERATION 28 5/8 in (4' case only) [72.7 cm] 38 15/16 in [98.9 cm] 431/4in ------------------------------- [109.9 cm] ----------------------------- - - ELECTRICAL JUNCTION BOX (WIRING PER LOCAL CODES) 1 1/2" PVC DRAIN CONNECTION (4' case only) 1 1/2" PVC DRAIN CONNECTION (L (6', 8', 12' cases) FRONT OF CASE 48 in [121.9 cm] {4' case) 72 in [182.9 cm] {6' case) 96 in [243.8 cm] {8' case) 144 in [365.8 cm] {12' case) NOTES: STUB -UP AREA RECOMMENDED STUB -UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS 1 1 241/8in [61.4 cm] 19 15/16 in [50.7 cm] i REAR REFRIGERATION `(14 1/2" off of floor) / 3 in [7.6 cm] 22 9/16 in [57.3 cm] 28 5/8 in [72.7 cm] 31 11/16 in [80.4 cm] -REFRIGERATION (6', 8', 12' cases) -1 1/2 in [3.8 cm] {END) 8 11/16 in [22.1 cm] -12 in [30.5 cm] • FRONT SILL HEIGHTAND OVERALL CASE HEIGHT VARY WITH BASEFRAME HEIGHT • ENDS ADD APPROXIMATELY 1 INCH TO CASE HEIGHT • WIRING -TO -THE -TOP ADDS APPROXIMATELY 4 INCHES TO CASE HEIGHT • A 2" MINIMUM AIR GAP IS REQUIRED BETWEEN THE REAR OF THE CASE AND A WALL • AVAILABLE SHELF SIZES: 10", 12", 14", 16", 18", 20", 22" & 24" • DASHED LINES SIGNIFY AREA INSIDE BASE RAIL BEHIND KICK -PLATE 4 OPERATING DATA OHMH-NRG Electrical Data Case Length Fans Per Case High Efficiency Fans Anti -Condensate Heaters 120 Volts 120 Volts Amps Watts Amps Watts 4' 2 0.50 36 ---' --- 6' 3 0.75 54 --- --- 8' 3 0.75 54 --- --- 12' 1 4 1 1.00 72 Lighting Data I Case Length Lights Per Row Light Length Clearvoyant LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps I Watts Amps Watts 4' 1 4' 0.10 11.9 0.18 21.5 6' 2 3' 0.14 16.6 0.25 29.8 8' 2 4' 0.20 23.8 0.36 43.0 12' i3 4' 0.30 35.7 0.54 64.5 Guidelines & Control Settings Front Sill2 Heights 3BTUH/ft Superheat Set Point @ Bulb (°F) Evaporator° (°F) Discharges Air (°F) Discharges Air Velocity (FPM) Conventional Parallel Std. 1531 1340 6-8 27 30 200 All Others 1410 1234 6-8 27 30 200 Defrost Controls Electric Defrost Timed -Off Defrost Hot Gas Defrost Defrosts Per Day Fail -Safe (min) Termination Temp (°F) Fail -Safe (min) Termination Temp (°F) Fail -Safe (min) Termination Temp (°F) 6 --- --- 40 42 --- --- 1 NOTE: "- -" indicates that feature is not an option on this case model. 2 For meat application: extended front sills are required for maintaining proper case temperature levels (5" baseframe = 24" or higher; 11" baseframe = 30" or higher) 3 BTUH/ft notes: - Listed BTUH/ft indicate unlighted shelves. For LED lighting, add 36 BTUH per 4' lighted shelf and 27 BTUH per 3' lighted shelf to determine Total Lighting BTUH Load, then divide the Total Lighting BTUH Load by the length of the case. For T8 lighted shelves and 3rd row lighting, add 92 BTUH per 4' lighted shelf and 69 BTUH per 3' lighted shelf to determine Total Lighting BTUH Load, then divide the Total Lighting BTUH Load by the length of the case. - Add 132 BTUH/ft when aftermarket merchandising accessories are utilized to determine the total BTUH load. 4 Listed evaporator temperature indicates unlighted shelves. For lighted shelves and/or aftermarket merchandising accessories, reduce the listed evaporator temperature by 2°F. 5 Conventional Discharge Air Control — Recommended settings: Cut -In Temp = Discharge Air + 2°F; Cut -Out Temp = Discharge Air - 2°F 6 Average discharge air velocity at peak of defrost. CASE DIMENSIONS 5 5" BASEFRAME Baseframe heights vary per order. 34 7/8 in [88.5 cm] 3rd ROW LIGHT (OPTIONAL) 13" MIRROR :p 16 in i(OPTIONAL) 75 3/16 in:'-- [190.9 cm]:F 18 in 46 13/16 in [118.9 cm] ;0 541/2 in `\ 78 15116 in :0 20 in [138.4 cm] i LOAD LIMIT [200.4 cm] a `__ LINE 20 in STANDARD .0 (FRONT .a 32 1/4 in � '0 [81.9cm] ` COIL 21 3/16 in PLENUM [53.8 cm] 17 in [43.2 cm] O6 5 1/8 in J 3/8 in [16.0 cm]O* [13.1 cm] 31 11116 in [80.4 cm] 38 15/16 in [98.9 cm] 43 1/4 in [109.9 cm] 38 15/16 in [98.9 cm] 43 1/4 in [109.9 cm] ELECTRICAL JUNCTION BOX (WIRING PER LOCAL CODES) NOTES 4" SOLID FRONT r1c6min ] 17 in 1 6" PLEXIGLAS FRONT i 6" THERMOPANE FRONT r16 in cm] 1EXTENDED STANDARD FRONTI /8 inV[50.7 7 in [68.9 cm] [61.4 cm] 17 in 15116 in V[43.2 cm] cm] WIRING TO THE TOP PIPING TO THE TOP 12 in (OPTIONAL) (OPTIONAL) r[30.5 cr oO 4 in [10.2 cm] REFRIGERATION 28 5/8 in (4' case only) [72.7 cm] r 1 1/2" PVC DRAIN CONNECTION (4' case only) 1 1/2" PVC DRAIN / T CONNECTION ��111YYYJJJ (6', 8', 12' cases) FRONT OF CASE 48 in [121.9 cm] (4' case) 72 in [182.9 cm] {6' case] 96 in [243.8 cm] {8' case] 144 in [365.8 cm] (12' case) * STUB -UP AREA ** RECOMMENDED STUB -UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS • FRONT SILL HEIGHT AND OVERALL CASE HEIGHT VARIES WITH BASEFRAME HEIGHT • ENDS ADD APPROXIMATELY 1 INCH TO CASE HEIGHT • WIRING -TO -THE -TOP ADDS APPROXIMATELY 4 INCHES TO CASE HEIGHT • A 2" MINIMUM AIR GAP IS REQUIRED BETWEEN THE REAR OF THE CASE AND A WALL • AVAILABLE SHELF SIZES: 10", 12", 14", 16", 18", 20", 22" & 24" • DASHED LINES SIGNIFY AREA INSIDE BASE RAIL BEHIND KICK -PLATE REAR REFRIGERATION (14 1/2" off of floor) 3 in [7.6 cm] 22 9/16 in [57.3 cm] 28 5/8 in [72.7 cm] 31 11/16 in [80.4 cm] ] (6', 8', 12' cases) L 1 112 in [3.8 cm] (END) 8 11/16 in [22.1 cm] -12 in [30.5 cm] 6 OPERATING DATA ONHM-NRG ELECTRICAL DATA Case Length Fans Per Case High Efficiency Fans Defrost Heaters 120 Volts 208 Volts 240 Volts Amps Watts Amps Watts Amps Watts 4' 2 0.47 28.0 1.92 400 2.22 532 6' 3 0.70 42.0 2.88 600 3.33 798 8' 4 0.93 56.0 3.85 800 4.44 1065 12' 5 1.17 70.0 5.77 1 1200 6.67 1600 LIGHTING DATA Case Length Lights Per Row Light Length Clearvoyant LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps Watts Am s Watts 4' 1 4 0.10 11.9 0.18 21.5 6' 2 3' 0.14 16.6 0.25 29.8 8' 2 4' 0.20 23.8 0.36 43.0 12' 3 4' 0.30 35.7 0.54 64.5 GUIDELINES and CONTROL SETTINGS Front/Rear Sill Heights BTUH/ ft Superheat Set Point@Bulb (°F) Evaporator (°F) Discharge Air (°F) Discharge . Air Velocity (FPM) Conventional Parallel Standard 1462 1320 6-8 22 30 340 All Others 1351 1220 6-8 22 30 340 DEFROST CONTROLS Defrosts Run -Off Time Electric Defrost Timed -Off Defrost Hot Gas Defrost Fail -Safe Termination Fail -Safe Termination Fail -Safe Termination Per Day (Min) (Min) Temp(°F) (Min) Temp(°F) (Min) Temp (°F) 4 1 6-8 35 47 45 47 26 45 NOTES: • Extended front sills are required on meat applications to maintain proper product temperature. An extended front has a minimum height of 24" on a 5" baseframe, or 30" on an 11" baseframe. • BTUH/ft notes: • Listed BTUH/ft data represent unlighted shelves. For LED lighting, add 9 BTUH/ft per row of lighted shelving. For T8 lighted shelves, see Hillphoenix Bluebook Appendix D for BTUH, amp and watt data. • Listed discharge air velocity represents the average velocity at the peak of defrost. • Temperature and defrost settings listed above are recommended start-up settings. Final operational settings may need to be adjusted for the store conditions in which the case operates. • The recommended evaporator temperatures may need to be adjusted based on system setup, store conditions, etc. The minimum recommended evaporator temperature is 4°F below the listed evaporator temperature. CASE DIMENSIONS 75 7116 in (191.6 cm) 77 112 in [196.8 cm] 11 in [27.9 cm] 11" BASEFRAME ONHM-NRG Baseframe heights vary per order. �27 5/8 in [70.2 cm}--� 3rd ROW LIGHT (OPTIONAL) 13" MIRROR 16 in (OPTIONAL) LOAD LIMIT 18 in �- i LINE 41 5/16 in [105.0 cm] 18 in 49 in' 124.5 cm] STANDARD FRONT 8 in 24 15/16 in [63.3 cm] VCOIL27 1/16 in [68.7 cm] 22 13/16 in [58.0 cm) D20 15116 in - [53.2 cm]' 22 112 in [57.2 cm] 25 118 in [63.8 cm]- - 35 13116 in [91.0 cm] Im ELECTRICAL JUNCTION BOX (WIRING PER LOCAL CODES) NOTES: WIRING TO THE TOP (OPTIONAL) 4" SOLID FRONT E 16 in cm] 1 30 in [76.2 cm] 25 13116 in [65.5I cm] 14 in [35.6 cm] 12 1116 in 1 23 3/16 in [30.6 cm] 4 in [10.2 cm] [58.8 cm] ------- K CK PLATE LOCATION 1 1/2" PVC DRAIN CONNECTION FRONT OF CASE 48 in [121.9 cm] (4' case) . 72 in [182.9 cm] (6' case) 96 in [243.8 cm] (8' case) 144 in [365.8 cm] (12' case) STUB -UP AREA RECOMMENDED STUB -UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS 6" THERMOPANE FRONT L /8 in cm) 1 32 15116 in [83.7 cm] 2213116 in [58.0 cm] 1 PIPING TO THE TOP (OPTIONAL) _REAR REFRIGERATION (18 in off of floor) 8 in [20.3 cm] r3 3/8 in [8.6 cm] i 23 3116 in [58.8 cm] 25 1/8 in cm] RATION L1 112 in [3.8 cm] (END) 7 5/8 in [19.3 cm] (4') 8 11/16 in [22.1 cm] (6', 8', 12') FRONT SILL HEIGHT AND OVERALL CASE HEIGHT VARY WITH BASEFRAME HEIGHT ENDS ADD APPROXIMATELY 1 INCH TO CASE HEIGHT WIRING -TO -THE -TOP ADDS APPROXIMATELY 4 INCHES TO CASE HEIGHT A 2" MINIMUM AIR GAP IS REQUIRED BETWEEN THE REAR OF THE CASE AND A WALL -AVAILABLE SHELF SIZES: 10", 12", 14", 16", 18" & 20" RECOMMENDED SHELF CONFIGURATION IN ROWS: 1-12", 1-14", 1-16" & 1-18" DASHED LINES SIGNIFY AREA INSIDE BASE RAIL BEHIND KICK -PLATE 8 OPERATING DATA ONHMH-NRG ELECTRICAL DATA Case Len th Fans Per Case High Efficiency Fans Defrost Heaters 120 Volts 208 Volts 240 Volts Amps Watts Amps Watts Amps Watts 4 2 0.47 1 28.0 1.92 400 2.22 532 6' 3 0.70 42.0 2.88 600 3.33 798 8' 4 0.93 56.0 3.85 800 4.44 1065 12' 5 1.17 70.0 1 5.77 1 1200 6.67 1600 LIGHTING DATA Case Length Lights Per Row Light Length Clearvoyant LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps Watts Amps Watts 4' 1 4' 0.10 11.9 0.18 21.5 6' 2 3' 0.14 16.6 0.25 29.8 8' 2 4' 0.20 23.8 0.36 43.0 12' 3 4' 0.30 35.7 0.54 64.5 GUIDELINES and CONTROL SETTINGS Front/Rear Sill Heights BTUH/ ft Superheat Set Point@Bulb (IF) Evaporator (IF) Discharge Air (°F) Discharge . Air Velocity (FPM) Conventional Parallel Standard 1462 1320 6-8 22 30 340 All Others 1351 1220 6-8 22 29 340 DEFROST CONTROLS Defrosts Run -Off Time Electric Defrost Timed -Off Defrost Hot Gas Defrost Fail -Safe Termination Fail -Safe Termination Fail -Safe Termination Per Day (Min) (Min) Temp(°F) (Min) Temp(°F) (Min) Temp(°F) 4 1 6-8 35 47 45 47 26 45 NOTES: • Extended front sills are required on meat applications to maintain proper product temperature. An extended front has a minimum height of 24" on a 5" baseframe, or 30" on an 11" baseframe. • BTUH/ft notes: • Listed BTUH/ft data represent unlighted shelves. For LED lighting, add 9 BTUH/ft per row of lighted shelving. For T8 lighted shelves, see Hillphoenix Bluebook Appendix D for BTUH, amp and watt data. • Listed discharge air velocity represents the average velocity at the peak of defrost. • Temperature and defrost settings listed above are recommended start-up settings. Final operational settings may need to be adjusted for the store conditions in which the case operates. • The recommended evaporator temperatures may need to be adjusted based on system setup, store conditions, etc. The minimum recommended evaporator temperature is 4°F below the listed evaporator temperature. CASE DIMENSIONS 9 11" BASEFRAME Baseframe heights vary per order. 27 5/8 in [70.2 cm] ---I 3rd ROW LIGHT (OPTIONAL) 13" MIRROR 16 in (OPTIONAL) LOAD LIMIT LINE 46 13116 in 18 in [118.9 cm] 80 1506 in (205.6 cm] 18 in 54 V2 in, STANDARD FRONT 83 in (210.8 cm) k16 27 1116 in [68.7 cm] 11 in22 13/16 in [27.9 cm](58.0 cm) 20 15l16 in [53.2 cm] 22 1/2 in [57.2 cm] 25 118 in [63.8 cm] 35 13/16 in [91.0 cm 35 13116 in [91.0 cm ELECTRICAL JUNCTION BOX (WIRING PER LOCAL CODES) NOTES: WIRING TO THE TOP (OPTIONAL) 31 5/16 in [79.5 cm] 22 13116 in (58.0 cm] 11 30 in [76.2 cm] 25 13116 in [65.5 cm] 14 in (35.6 cm] 1 ` 12 1/16 in 23 3116 in [30.6 cm] 4 in [58.8I cm] [70.2 cm] V ------- --- - KICK PLATE LOCATION 1 1/2" PVC DRAIN CONNECTION FRONT OF CASE 48 in [121.9 cm] (4' case) 72 in [182.9 crn] {6' case) 96 in [243.8 cm] {8' case) 144 in [365.8 cm] (12' case) ONHMH-NRG 1 33 118 in [84.2 cm] 22 13116 in [58.0 cm] J32 15116 in [83.7 cm] 22 13116 in (58.0I cm] i PIPING TO THE TOP (OPTIONAL) _REAR REFRIGERATION (18 in off of floor) - 8 in [20.3 cm] 3318in[8.6cm] } 23 3116 in (58.8 cm] 25 1!8 in [63.1 1 cm] FRIGERATION L1 112 in [3.8 cm] (END) 7 518 in [19.3 cm] (4') 8 11116 in (22.1 cm] (6', 8'. 12') STUB -UP AREA RECOMMENDED STUB -UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS FRONT SILL HEIGHT AND OVERALL CASE HEIGHT VARY WITH BASEFRAME HEIGHT ENDS ADD APPROXIMATELY 1 INCH TO CASE HEIGHT WIRING -TO -THE -TOP ADDS APPROXIMATELY 4 INCHES TO CASE HEIGHT A 2" MINIMUM AIR GAP IS REQUIRED BETWEEN THE REAR OF THE CASE AND A WALL AVAILABLE SHELF SIZES: 10", 12", 14", 16", 18" & 20" - RECOMMENDED SHELF CONFIGURATION IN ROWS: 1-12", 1-14", 1-16", 1-18" & 1-20" 10 GENERAL INFORMATION Thank you for choosing Hillphoenix display cases for your food merchandising needs. This handbook contains important technical information and will assist you with the installation and operation of your new display cases. By closely following the instructions, you can expect attractive fit and finish, peak performance, and long case life. We are always interested in your suggestions for improvements to Hillphoenix products and accessories —case design, technical documents, etc. Please feel free to contact our Marketing Services group at the toll -free number listed below. Thank you for choosing Hillphoenix, and we wish you the very best in outstanding food merchandising. CASE MODELS OHM-NRG and OHMH-NRG multi -deck merchandisers. OPERATING DATA & DIMENSIONAL DRAWINGS Operating data and dimensional drawings for the cases listed in this manual can be found on pages 2-5. STORE CONDITIONS Hillphoenix cases are designed to operate in an air-condi- tioned store that maintains a 75°F (24°C) store tempera- ture and 55% (max) relative humidity (CRMA conditions). Case operation will be adversely affected by exposure to excessively high ambient temperatures and/or humidity. REFRIGERATION SYSTEM OPERATION Air-cooled condensing units require adequate ventilation for efficient performance. Machine -room temperatures must be maintained at a minimum of 65°F in winter and a maximum of 95°F in summer. Minimum condensing tem- peratures should be no less than 70oF. Ia*1=11YjIZLeXecm*1 Examine fixtures carefully and in the event of shipping damage and/or shortages, please contact the Service Parts Department at 1-800-283-1109. CASE DAMAGE Claims for obvious damage must be 1) noted on either the freight bill or the express receipt and 2) signed by the car- rier's agent; otherwise, the carrier may refuse the claim. If damage becomes apparent after the equipment is unpacked, retain all packing materials and submit a written request to the carrier for inspection within 14 days of receipt of the equipment. LOST/MISSING ITEMS Hillphoenix equipment is carefully inspected before ship- ping to insure the highest level of quality. Any claim for lost/missing items must be made to Hillphoenix within 48 hours of receipt of the equipment. SERVICE/TECHNICAL SUPPORT For service or technical questions, please contact our Case Division Customer Service Department at 1-800- 283-1109. For questions regarding our refrigeration sys- tems or electrical distribution centers, please contact our Systems Division Customer Service Department at 1-770- 388-0706. PARTS ORDERING If you need to contact Hillphoenix regarding specific fix- tures or parts, please call 1-800-283-1109 and ask for a Service Parts Representative. Provide the following infor- mation about the part you are ordering: • Model number and serial number* of the case for which the part is intended. • Length of the part (if applicable). • Color of part (if painted) or color of polymer part. • Whether part is for left- or right-hand application. • Quantity 'Serial plate is located inside the case on the top -left panel. If the parts are to be returned for credit, ask the Parts Department to furnish you with a Return Material Authorization Number. See Appendix A for a detailed parts list and illustration. Hillphoenix 1925 Ruffin Mill Rd. Colonial Heights, VA 23834 Mon. -Fri. (8 a.m. to 5 p.m. EST) Tel: 1-800-283-1109 Fax: 804-526-7450 Web site: www.hillphoenix.com INSTALLATION & TRIM OUT 11 FLOOR PREP 1. Ask the general contractor if your current copy of the building dimensions are the most recently issued. Also, ask for the points of reference from which you should take dimensions to locate the cases. 2. Using chalk lines or a laser transit, mark the floor where the cases are to be located for the entire lineup. The lines should coincide with the outside edges of the case feet. 3. Leveling is necessary to ensure proper case alignment and to avoid potential case damage. Locate the high- est point on the positioning lines as a reference for determining the proper height of the shim -pack level- ers. A laser transit is recommended for precision and requires just one person. 4. Locate basehorse positions along the chalk line and spot properly leveled shim packs at each location. LINE-UP & INSTALLATION Single Case 1. Roll the case into position, leaving a minimum of 2" be- tween the wall and back of case. Using a "J" bar, raise the end of the case (under cross support), remove the caster assembly (Fig. 1) and lower the basehorse on to the shim packs. Repeat on the other end of the case. Fig. 1 Removing the casters is an easy process. Simply flatten and remove the cotter pins that are holding the casters in place. Then lift the case with a "J" bar and slide the caster assemblies out. The dismantled casters can now be discarded. Be certain that your hands and feet are out of the way before lowering the case after the removal of the casters. Failure to do so may result in serious injury. 2. Once the basehorse is properly placed on the shim packs, check the vertical plumb of the case by plac- ing a bubble level on the rear wall. Add/remove shim packs as needed. For the horizontal level, repeat this process after placing the bubble level on the front sill. Multi -Case 1. Remove any shelves (discard the shelf clips) and/or loose items (e.g. shipping braces, mirror assemblies, etc) from the cases that may interfere with case join- ing. Keep all loose items as they will be used later in the installation process. 2. Remove the return air grill at the case joint. The grill lifts out without fasteners and may be easily removed to gain clear access to the case -to -case joining bolts. 3. Follow the single -case installation instructions for the first case, then position the next case in the line-up ap- proximately 3' away. Remove the casters on the end that is closest to the first case. 4. Apply the foam tape gasket (supplied) and a bead of butyl or silicone sealant to the end of the first case (Fig. 2). From the opposite end, push the second case to a position that is approximately 6" from the first case, then remove the remaining casters and position case on the shim packs. = bolt holes — = foam tape gasket O = butyl or silicone sealant NOTE: It is recommended that cases be bolted together in the numbered order indicated in the diagram. Fig. 2 Bolt holes, foam tape gasket and sealant 12 INSTALLATION & TRIM OUT 5. Loosen the cornice joint at case end (cornice screws are located on top of the case). Be certain that cornice joints and pins are properly aligned. Cases are now ready to be joined. 6. Push the cases tightly together, then lightly bolt them together through the holes that are provided (Fig. 2). Tighten all the joining bolts until all margins are equal. Be careful not to over tighten. 7. Repeat steps 3-6 of this sequence for all remaining cases. Be certain to properly level all cases. 8. If seismic brackets are included, see Appendix D for installation instructions. TRIM OUT 1. To align the master bumpers, slide master bumper joint trim in between adjoining master bumpers. (Fig. 3). 2. Slide the master bumpers left or right to close the seams as required, working outwards from the center of the line-up to the ends. Fig. 3 Master bumpers and joint trim 3. Close the seam where the bumper joins the case end. The bumper joint closes the seam that may develop if the master bumper is moved away from the end to close the case -to -case joint seam. 4. Seal the interior case -to -case joints with caulk (sup- plied), then apply acrylic tape (supplied) over the pipe - chase seam (Fig. 4). The tape acts as a watershed preventing water from settling in the case joint. 5. If mirror assembly and mirror scoop are included, see Appendix E for installation instructions. 6. Re -install shelves (or peg hook assemblies if applica- ble). Be aware that differing shelf configurations will affect energy consumption and case performance. If shelf fillers are included, see Appendix F for installa- tion instructions. If peg hook assemblies are included, see Appendix G for installation instructions. Fig. 4 Sealing the pipe chase Fig. 5 Cornice joints 7. Tighten all cornice joints as needed (Fig. 5). Working outward from the center of the line-up, loosen the fas- teners on the top and slide the cornices in one direction so that each joint aligns tightly together. Tighten the fasteners on top and apply an external joint band on the extreme ends of the lineup if a gap exists. 8. Properly align the front panels as needed, then install the front panel trim (supplied). Loosen screws, allowing "J" Rail to drop down to the floor. Retighten screws. FLAT FRONT PANEL "J" RAIL Fig. 6 "J" rail installation INSTALLATION & TRIM OUT 13 9. The "J" rail is shipped attached to the case as shown. Loosen screws holding "J" rail to allow it to slide down and fit flush with the floor (Fig. 6). Re -tighten screws. 10. If cases are equipped with contour front panels, the upper kickplate retainer is shipped loose in the case. When installing the upper kickplate retainer, be sure it is positioned behind the lip on the front panel. 11. Insert top of kickplate into the kickplate retainer. Slide the kickplate up into the retainer, then down onto the "J" rail (Fig. 7). Be certain that the bottom of the kick - plate is fitted over extruding "lip" of the "J" rail. 12. If the case is outfitted with a polymer bumper, insert the nose bumper into the open bumper channel (Fig. 8), up to 96 feet. Hillphoenix recommends leaving an addi- tional 6 inches of nose bumper at the ends to allow for shrinkage during the first 24-48 hours following case start -up —after sufficient time has passed, cut away the excess bumper for final fit and finish. Be certain to use an appropriate cutting tool (tubing- or PVC -cutter) to ensure a smooth cut. 13. If the case is outfitted with a factory -installed, snap -on bumper track, install the snap -on track bumper onto the track, up to 96 feet. For rigid bumper, cut for as tight a fit as possible —to allow for minor shrinkage fol- lowing start -up —and install. For rolled bumper, Hill - phoenix recommends leaving an additional 6 inches of nose bumper at the ends to allow for shrinkage during the first 24-48 hours following case start -up —after suf- ficient time has passed, cut away the excess bumper for final fit and finish. Be certain to use an appropriate cutting tool (tubing- or PVC -cutter) to ensure a smooth cut. 14. If case top fascia is included, see Appendix H for in- stallation instructions. 15. If electronic display modules are included, see Appen- dix I for installation instructions. Fig. 7 Kickplate installation FRONT ASSEMBLY 1. Slide kickplate UP into kickplate retainer recess. 2. Drop the kickplate DOWN onto the "J" rail lip. KICKPLATE Fig. 8 Front assembly 14 CONNECTIONS & PIPING <C�> Connections are illustrated in dimensional drawings found on pages 2-5. REFRIGERATION There are 3 refrigeration piping options for this case group: standard, rear, and top. Standard piping penetration is located beneath the case in the front -right area, fully visible in front of the fan plenum. Rear piping penetration is located behind the case in the rear -right area, consisting of a pre-cut access punch -out that exposes the foam material that must be penetrated prior to pipe joining (Fig. 9). Rear top -box option consists of piping enclosed in a foam box that exits at the back -right of the case, near the top. If hot gas defrost is utilized, suction lines to each case in the circuit should be of equal distance from the main suc- tion line. The expansion valve and other controls - located on the left-hand side of the case - are accessible by lifting the two left-hand deck pans (lifting the fan plenum is not required). Before operating the case, be certain to remove the ship- ping blocks (Fig. 10) that protect the refrigeration lines dur- ing shipping. If it becomes necessary to penetrate the case tank in any area, be certain to seal any open gaps after- wards with canned -foam sealant and white RTV. Fig. 9 Penetrate foam as needed to access piping Fig. 10 Remove the shipping blocks OHM-NRG (OHM-NRG shown. For OHMH-NRG connections, see page 5.) WIRING TO THE TOP (OPTIONAL) PIPING TO THE TOP (OPTIONAL) 12 in F[30.5 cm] O O _ REAR REFRIGERATION (14 1/2" off of floor) 3 in [7.6 cm] 4 in [10.2 cm] 22 9116 in [57.3 cm] REFRIGERATION 28 5/8 in 28 5/8 in (4' case only) [72.7 cm] [72.7 cm] \\\ 31 11/16 in 38 15/16 in [80.4 cm] [98.9 cm] [109.9 cm] 1L ---------------------------- — -- REFRIGERATION (6', 8', 12' cases) 1 1/2" PVC DRAIN L1 1/2 in [3.8 cm] ELECTRICAL CONNECTION L (END) (4' case only) JUNCTION BOX 1 1/2" PVC DRAIN - 8 11/16 in [22.1 cm] (WIRING PER LOCAL CODES) CONNECTION (6', 8', 12' cases) 12 in [30.5 cm] FRONT OF CASE 48 in [121.9 cm] (4' case) 72 in [182.9 cm] (6' case) 96 in [243.8 cm] (8' case) 144 in [365.8 cm] (12' case) CONNECTIONS & PIPING 11 PLUMBING The drain outlet is specially molded out of PVC material and is located in the front -center of the case for conve- nient access. The "P" trap, furnished with the case, is con- structed of schedule 40 PVC pipe (Fig. 11). Care should be given to ensure that all connections are water -tight and sealed with the appropriate PVC or ABS cement. Fig. 11 "P" trap; drain line The drain lines can be run left or right of the tee with the proper pitch to satisfy local drainage requirements. Since the kickplate is shipped loose with the case, you should have open access to the drain line area during installation. If the kickplate has been installed, you will find it very easy to remove. Simply lift the kickplate up from the "J" rail and pull it out, away from the case (see Trim Out section). ELECTRICAL Electrical junction boxes are located at the front bottom - left (Fig. 12) or at the rear top -left of the case (Fig. 13). Electrical wiring can also be run through the raceway running along the front -bottom area of the case. Fig. 12 Junction box beneath case For case -to -case wiring, run conduit between the junction boxes or run wiring through the raceway. When connecting to the junction box on the bottom -left side of the case, field wiring should exit box from the right side (furthest away from case wiring) to allow more room inside for wiring con- nections. For more detailed electrical wiring information, see Appendix B. Fig. 13 Junction box on top of case Be certain to clear the case of any loose packaging or case materials before ener- gizing the case. Failure to do so may re- sult in case damage or malfunction. If brazing is necessary, place wet rags around the area to avoid tank damage. Be certain that all piping and electrical connections comply with local codes. Installation of 3rd-party materials may result in diminished case performance. 16 PRE -POWER CHECKLIST Before powering -up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and com- pliance with warranty terms. ❑ Have you thoroughly examined the case for shipping damage? (see pg • 6) ❑ Have you removed and discarded the casters? (see pg. 7) ❑ Have you checked the vertical plumb of the case? The horizontal level? (see pg. 8) ❑ Have you applied the foam tape gasket and sealant between adjoining cases? (see pg. 9) ❑ Have you sealed the case -to -case joints by applying caulk and acrylic tape to the pipe -chase seam? (see pg. 8) ❑ Have you removed the shipping blocks from the refrigeration lines? (see pg. 10) ❑ Have you sealed any tank penetrations? (see pg. 11) ❑ Have you cleared the case of any loose packaging or case materials? (see pg. 11) AIR QUALITY CONTROL 17 AIR FLOW & PRODUCT LOAD Do not overload the food product display so that it impinges on the air flow pattern —doing so will result in diminished performance and loss of proper temperature levels, partic- ularly when the discharge honeycomb and return air grille are covered. Please keep products within the load limit line shown on the diagram below (Fig. 14). DEFROST & TEMPERATURE CONTROLS Hillphoenix cases utilize electric, hot gas, or timed -off defrost. The primary components used for the defrost cycle are the various defrost termination sensors, which work to terminate the defrost cycle in the case. These controls may include 1) a Klixon° thermostat, 2) a sensor probe, or 3) a dial -type thermostat with sensor bulb (the thermostat will always be mounted with the electrical con- trols of the case, either in an electrical junction box or in the electrical raceway, etc. If electric defrost is used, the defrost termination sensor will be located either behind the rear baffle or mounted to the coil. If hot gas defrost is used, the defrost termination sensor will be mounted to the dump line —the sensor should always be mounted on the coil -side of the check valve or solenoid valve. Finally, if timed -off defrost is used, the refrigeration cycle is simply turned off by the case con- trols for a specified amount of time; therefore, there are generally no active defrost components utilized. 00DISCHARGE AIR AIR FLOW LOAD / LIMIT RETURN . AIR The discharge air probe monitors the temperature of the discharge air and may be used as the defrost termination sensor. The probe can generally be found behind the rear baffle, in the upper baffle, or in front of the honeycomb. NOTE: if the discharge air probe is used for defrost termi- nation, none of the termination sensors listed earlier will be installed in the case. For more detailed information on suggested defrost times and settings, see pages 2 and 5. Further adjustment may be required depending on store conditions. 17=110=1NiyyIIZllki[�-111U 1 7:14_`I To identify the correct superheat settings, complete the fol- lowing steps: 1. Obtain suction pressure from the access port. Obtain the suction line temperature from the area near the TXV bulb at the outlet of the evaporator coil (Fig. 15). 2. Using the suction pressure reading and the Sporlan° temperature -pressure chart (see Appendix C), con- vert pressure -to -temperature. 3. Finally, subtract the converted temperature reading from the actual temperature reading. The resulting number is the superheat setting —once this has been determined, adjust the TXV as needed to obtain the proper setting. Fig. 15 Obtain pressure and temperature readings Fig. 14 Airflow 18 LIGHTING SYSTEMS i SHOCK HAZARD Always disconnect power to case when servicing or cleaning. Failure to do so may result in serious injury or death. Hillphoenix cases may be equipped with either T-8 lights or LED luminaires. Depending on case configuration, T-8 electronic ballasts or LED power supplies operate both the canopy lights and shelf lights and are located in the cornice area, above the light reflectors. During replacement of ballasts/power supplies, always confirm that the new bal- lasts/power supplies are the correct replacement parts. Failure to do so may result in damage to the LED system or the luminaires, leading to poor perfor- mance and increased risk of safety issues. Both lighting systems have an ON/OFF switch that is located in the upper left-hand corner of the lighting assem- bly. Once cases have been properly positioned in the store and an electrician has connected the lighting circuit, the lights may be turned on to verify that they are con- nected and functioning properly. To ensure peak performance, it is advisable to run the lighting systems only when the store climate control is on and case refrigeration is started. NOTE: it is highly recom- mended that the ambient store temperature not exceed 80°F. REPLACING T-8 LIGHTS 1. Simultaneously pull down at both ends of the old T-8 light to remove from the lamp holder (Fig. 16). Re- move the lamp caps and plastic shield from the old light, then discard the light. 2. Attach the lamp caps and plastic shield to the new T-8 lamp. 3. Push the new T-8 lamp into place on the lamp hold- er. When the T-8 is properly seated, the lamp button - which secures the T-8 to the lamp holder - will be clearly visible through the lamp button hole (Fig. 17). Fig. 17 Align new T-8 with plug button to secure REPLACING SHELF LED LUMINAIRES 1. Unplug the LED luminaire (Fig. 18). 2. Pinching the latching clips inward at the ends of the lu- minaire, rotate luminaire down at each end until hooks are free, then remove (Fig. 19). 3. To install the new luminaire, place hook into shelf roll at shelf front and rotate rear of luminaire toward the shelf. 4. Depress the rear clip so that luminaire can finish rota- tion and until clip engages the shelf bracket. Fig. 18 Unplug the LED luminaire Fig. 16 Remove old T-8 LIGHTING SYSTEMS 19 Fig. 19 Remove the old LED luminaire REPLACING NON -SHELF LED LUMINAIRES 1. Squeeze plastic clips on the four -pin connector at the end of the luminaire, then pull free of the receptacle (Fig. 20). 2. At the other end, slide the luminaire to the opening and disengage from the metal housing slot (Fig. 21). Fig. 20 Squeeze the latching clips and pull the luminaire free Fig. 21 Slide the other end to the opening in the sheet metal and disengage 3. To install the new luminaire, simply reverse the previ- ous steps. ACCESSING BALLASTS/POWER SUPPLIES Ballasts or power supplies are housed behind the light reflectors and may be easily removed by following these instructions: 1. Remove T-8 lamps or LED luminaires as described earlier in this section. 2. Light reflectors are held in place by screws located along the back edge of the reflector. Remove the screws and while maintaining a secure grip on the reflector, swing the loose edge down until the ballasts/ power supplies are visible on the back -side. 3. Disengage the front edge of the light reflector by lifting it free of the front channel hinge, then carefully remove. Ballasts/power supplies will now be visible on the back -side of the reflector (Fig. 22). 4. To re -install the reflector, secure the front edge of the reflector over the front channel hinge, swing the back edge up into place, then replace the screws along the back edge of the reflector. Fig. 22 Clear view of the power supply on the back side of the light reflector <C!.P If V is installed on top of the case, do not drill into the area above the ballast(s). Do- ing so may result in case damage. 20 FANS & CASE CLEANING SHOCK HAZARD Always disconnect power to case when servicing or cleaning. Failure to do so may result in serious injury or death. Exercise extreme caution when working in • a case with the coil cover removed. The coil contains many sharp edges that can cause severe cuts to the hands and arms. FANS Fan blade pitch is set during manufacturing. It is important that the blade pitch be maintained as specified. Do not attempt a field modification by altering the blades. Fan assemblies may be changed with an easy two-step process without lifting up the plenum, thereby avoiding the necessity to unload the entire product display to change the fan assembly: 1. Unplug the fan motor (Fig. 23), easily accessible out- side the plenum. Be certain to push the power cord back through the plenum opening to avoid damage to the power cord. 2. Remove fasteners, then lift out the entire fan basket. Reverse procedure when re -installing fan basket. Fig. 23 Fan basket Power cord must be pushed back through the plenum opening before removing the fan basket. Failure to do so may result in damage to the power cord. CLEANING PROCEDURES A periodic cleaning schedule should be established to maintain proper sanitation, insure maximum operating ef- ficiency, and avoid the corrosive action of food fluids on metal parts that are left on for long periods of time. We recommend cleaning once a week. • Be certain that all electricity to the case is turned off before servicing or cleaning to avoid electrical shock. In some cases, more than one switch may need to be turned off to completely de -energize the case. • All surfaces pitch downward to a deep -drawn drain trough, funneling liquids and other debris to the waste outlet. Check waste outlet before starting the cleaning process to insure it is unclogged. Avoid introducing water faster than the case drain can carry it away. • Lift the fan plenum to gain access to the coil for clean- ing and maintenance (Fig. 24). Fig. 24 Single -piece fan plenum and coil cover • To clean the lights, shut off the lights in the case, then wipe them down with a soft, damp cloth. Avoid using harsh or abrasive cleaners as they may damage the lights. Be certain that the lights are completely dry be- fore re -energizing. • If any potentially harmful cleaners are used, be cer- tain to provide a temporary separator (e.g., cardboard, plastic wrap, etc.) between those cases that are being cleaned and those that may still contain product. • Avoid spraying cleaning solutions directly on electrical connections. • Allow cases to be turned off long enough to clean any frost or ice from coil and pans. • Remove kickplate and clean underneath the case with a broom and a long -handled mop. Use warm water and a disinfecting cleaning solution when cleaning un- derneath the cases. Hi//p/�oe�ix A DOVER COMPANY WARRANTY HEREINAFTER REFERRED TO AS MANUFACTURER FOURTEEN MONTH WARRANTY. MANUFACTURER'S PRODUCT IS WARRANTED TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND MAINTENANCE FOR A PERIOD OF FOURTEEN MONTHS FROM THE DATE OF ORIGINAL SHIPMENT. A NEW OR REBUILT PART TO REPLACE ANY DEFECTIVE PART WILL BE PROVIDED WITHOUT CHARGE, PROVIDED THE DEFECTIVE PART IS RETURNED TO MANUFACTURER. THE REPLACEMENT PARTASSUMES THE UNUSED PORTION OF THE WARRANTY. This warranty does not include labor or other costs incurred for repairing, removing, installing, shipping, servicing, or han- dling of either defective parts or replacement parts. The fourteen month warranty shall not apply: 1. To any unit or any part thereof which has been subject to accident, alteration, negligence, misuse or abuse, operation on improper voltage, or which has not been operated in accordance with the manufacturer's recommendation, or if the serial number of the unit has been altered, defaced, or removed. 2. When the unit, or any part thereof, is damaged by fire, flood, or other act of God. 3. Outside the continental United States. 4. To labor cost for replacement of parts, or for freight, shipping expenses, sales tax or upgrading. 5. When the operation is impaired due to improper installation. 6. When installation and startup forms are not properly complete or returned within two weeks after startup. THIS PLAN DOES NOT COVER CONSEQUENTIAL DAMAGES. Manufacturer shall not be liable under any circumstances for any consequential damages, including loss of profit, additional labor cost, loss of refrigerant or food products, or injury to personnel or property caused by defective material or parts or for any delay in its performance hereunder due to causes beyond its control. The foregoing shall constitute the sole and exclusive remedy of any purchases and the sole and exclu- sive liability of Manufacturer in connection with this product. The Warranties are Expressly in Lieu of All Other Warranties, Express or Implied and All Other Obligations or Liabilities on Our Part. The Obligation to Repair or Replace Parts or Components Judged to be Defective in Material or Workmanship States Our Entire Liability Whether Based on Tort, Contract or Warranty. We Neither Assume Nor Authorize Any Other Person to Assume for Us Any Other Liability in Connection with Our Product. MAIL CLAIM TO: Hillphoenix Display Merchandisers 1925 Ruffin Mill Road Colonial Heights, VA 23834 1-800-283-1109 Hillphoenix Refrigeration Systems & Electrical Distribution Products 709 Sigman Road Conyers, GA 30013 770-285-3200 06/00 Warning Servicing & Case Care When servicing or cleaning cases, observe the following procedures to avoid case damage or injury: Be certain that all electricity to the case is turned off before servicing or cleaning to avoid electrical shock. In some cases, more than one switch may need to be turned off to completely de -energize the case. Do not spray cleaning solution or water directly on fan motors or any electrical connections. All lighting components must be dried thoroughly before installation and before re -energizing the lighting circuit. Please refer to the Case Cleaning section of this installation manual. Hillphoenix 1925 Ruffin Mill Rd. Colonial Heights, VA 23834 Mon. -Fri. (8 a.m. to 5 p.m. EST) Tel: 1-800-283-1109 Fax: 804-526-7450 Web site: www.hillphoenix.com Due to our commitment to continuous improvement, all specifications are subject to change without notice. Hillphoenix is a Sustaining Member of the American Society of Quality. Fresh thinbng. TM „ Hi//p/`soe�six Responsible solutions. :.* A ROVER COMPANY 2, 3, 4 & 5 Door High Narrow Reach -In Glass Door Merchandiser JNRZHFrozen Food/Ice Cream GENERAL NOTES: • Light controls - occupancy sensors are required. Option 1: OEM Provided: OEM anti -condensate and lighting controls (on/off) are standard unless otherwise specified. Option 2: End User Provided: Light controls should be based on occupancy sensors. Store level A/S control should be set to 30% minimum off time at 752F/55%RH. SHIPPING WEIGHT Case Weight JNRZH - 2017 000 NSF c&us COMPLIANT = COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. JNRZH Rev. Date Rev. # Rev. Title 01-23-24 5 DATA UPDATE 10-24-23 4 NOTES UPDATE Hi//phoe�six a = company 2, 3, 4 & 5 Door High Narrow Reach -In Glass Door Merchandiser JN RZH Frozen Food/Ice Cream ELECTRICAL DATA Case Length Fans Per Case High Efficiency Fans Tank Heaters Defrost Heaters (1-Phase) 120 Volts 120 Volts 208 Volts 240 Volts Amps Watts Amps Watts Amps Watts Amps Watts 2 Door 2 0.60 50 1.50 152 7.50 1552 8.60 2068 3 Door 3 1.00 75 1.60 171 10.90 2274 12.60 3018 4 Door 4 1.30 100 1.90 226 14.30 2984 16.60 3992 5 Door 5 1.60 125 2.30 275 17.50 3640 20.20 4840 LIGHTING DATA Case Length Door Size OP7 Single Swing 120 Volts Amps Watts 2 Door 30" 0.28 33.0 3 Door 30" 0.41 49.2 4 Door 30" 0.55 65.4 5 Door 30" 0.68 81.6 ANTI CONDENSATE DATA Case Length Door Size Individual Circuits ELMD, 190 Doors Door Frame Heated Doors Low E Doors 101-LE 120 Volts 120 Volts 120 Volts Amps Watts Amps Watts Amps Watts 2 Door 30" 0.64 76 0.38 45 1.26 151 3 Door 30" 0.95 114 0.57 68 1.76 211 4 Door 30" 1.27 152 0.76 91 2.29 275 5 Door 30" 1.59 191 0.95 114 2.78 334 2017 DOE NSF c �L us COMPLIANT � COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. JNRZH Rev. Date Rev. # Rev. Title 01-23-24 5 DATA UPDATE 10-24-23 4 NOTES UPDATE Hi//phoersix a = company 2, 3, 4 & 5 Door High Narrow Reach -In Glass Door Merchandiser JN RZ H Frozen Food/Ice Cream GUIDELINES AND CONTROL SETTINGS {DIRECT EXPANSION HFC/CO2} Application Door Heat Refrigeration Load Per Door (BTU/H) Superheat Set Point @ Bulb (OF) Evaporator (OF) Discharge Air (OF) Discharge Air Velocity (FPM) Conventional Parallel Frozen Food Heated Glass and Rail 1029 1008 3-5 - 7 - 1 250 Frozen Food Unheated Glass/Heated Rail 974 954 3-5 - 7 - 1 250 Ice Cream Heated Glass and Rail 1108 1081 3-5 - 15 - 8 250 Ice Cream Unheated Glass/Heated Rail 1043 1018 3-5 - 15 - 8 250 DEFROST CONTROLS {DIRECT EXPANSION HFC/CO2} Electric Defrost Hot Gas Defrost Defrosts Per Day Fail -Safe (Min) Termination Temp (OF) Run -Off Time (Min) Fail -Safe (Min) Termination Temp (OF) Run -Off Time (Min) 1 46 50 0 24 73 13 - 15 NOTES: • -" indicates that this feature is not an option on this case model. Door / Frame A/S circuits and fans share the same circuit (same cycle). Default jumpers can be removed in field if separate circuits are desired for A/S and fans. Drain heater and fan motors share the same circuit (separate cycles). Electrical circuits must be properly sized to accomodate the higher current draw of the tank heater • Anti -condensate heat values for Low E doors represent a door with no heat on the glass. • Listed discharge air velocity represents the average velocity at the peak of defrost. • Temperature and defrost settings listed above are recommended start-up settings. Final operational settings may need to be adjusted for the store conditions in which the case operates. No run-off time required for electrical defrost. Typical electric defrost time is 20 minutes when ambient conditions are 750F / 55%RH. • Light and A/S wattages above reflect 100% run time. To determine actual daily energy usage at 752F/55%RH conditions, reduce the light wattages above by 42% and reduce the A/S values above by the minimum off time. • Discharge air temperature values represent readings taken within the uppper air channel immediately behind/upstream of the honeycomb. • For optimal performance in HFC applications, it is recommended to close the liquid line and close the suction line during defrost. Defrost parameters may need to be adjusted if other methods are used. 2017 00E NSF c �L us COMPLIANT 0 COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. JNRZH Rev. Date Rev. # Rev. Title 01-23-24 5 DATA UPDATE 10-24-23 4 NOTES UPDATE Hi//p/`soe�six a = company 2, 3, 4 & 5 Door High Narrow Reach -In Glass Door Merchandiser JN RZ H Frozen Food/Ice Cream Q•za4uff•gw STANDARD SWING DOOR 2, 3, 4, & 5 - DOOR CASES L 30" [76.2 cm] J 2017 00E NSF c&us COMPLIANT � COMPONENT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. FRONT OPTIONS FLAT FRONT IONT PANEL .1. ;KPLATE JNRZH Rev. Date Rev. # Rev. Title 01-23-24 5 DATA UPDATE 10-24-23 4 NOTES UPDATE Hi//phoersix a = company 2, 3, 4 & 5 Door High Narrow Reach -In Glass Door Merchandiser JN RZH Frozen Food/Ice Cream TOPWIRING 311/8" [79.2 cm] LOAD LIMIT 22"' 22" � _ = g 0 x a <7 w I c7 w w x w x Ln 0 w x = am Z Lu X: w CZ O 22" I Er O w z ¢ U x w D Ln 0 Er LL EL U)) z E E wU E 22" cEi co n I cE > O E U U 0 M co (`') T N It M O cm '_T-' 221, I 10 O M GDM I 23 1/4" [59.1 cm] 00 00 co �6 " 00 u 00 (7 10 E U 6 3/8" [16.2 cm] M co 24 1 /2" [62.2 cm] 26 CO W r 30 7/8" [78.4 cm] T 34 5/8" [87.9 cm] 36 5/8" [92.9 cm] 7" 5" [12.7 cm] WIRING TO THE TOP (14" X 10" X 4") E U 00 N 07 WIRING TO BOTTOM (OPTIONAL) NOTES: STUB -UP AREA. RECOMMENDED STUB -UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS. • Ends add approximately 1" to case height, 1/2" to the back & 1" to the front. DOE NSF C@us COMPLIANT JNRZH � COMPONENT REAR REFRIGERATION LOCATED 10 5/8" ABOVE FINISH FLOOR E U � n � DEFAULT REFRIGERATION 8 3/4" [22.2 cm] f 1 1 /2" [3.8 cm] ( END) DRAIN LOCATION FROM CENTERLINE CASELENGTH 2DR 3DR 4DR 5DR "X" 0" - 0.5" 0" 0" ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72 Rev. Date Rev. # Rev. Title SPECIFICATIONS. HILLPHOENIX REFRIGERATED Hi//p/`soerijX DISPLAY CASES FOR SALE IN THE UNITED STATES 01-23-24 5 DATA UPDATE a = company MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. 10-24-23 4 NOTES UPDATE SSAM-RG I 10t4G i ra T • %E . rl f Ord �f `"�.• �,`�'�'.�. :, •' �� / .-:,., 8w. LEG � • �. ;��' Q� Ib ANfl Photo may depict options not included on standard models. Model SSAM-RG Service Single -Deck 5L101NG 13 9/16 in REAR LOAD DOORS r[34.4 cm] 21 50I in ��30 314 in Y28.3 cm] `y]I'�l 78.1 cm 28 1/8 in [71.4 cm] ELECTRICAL BOX, 41116 in [10.2 cm] 39 7/8 in 45 318 in 22 15116 in [58.4 cm] 7 in [17.8 cm] Please consult Hillphoenix Engineering Reference Manual for dimensions, plan views and technical specifications. Specifications subject to change without notice. Designed for optional performance in store environments where temperature and humidity do not exceed 75 degrees and 55% R.H. Certified to UL 471 and ANSI/NSF Standard 7. Base Model Features C-frame with bullet leg construction. Standard 50-1/2"H with TH base frame height. Exterior: Painted metal, including lower front panel above base. Stainless steel base trim, front and sides. Stainless steel exterior trim. Painted metal outside back and rear base trim. Stainless steel top sill. Clear rear load doors with black frames. 5/8" thermopane, insulated regular -glare curved lift front glass. Gray glass gasket, wipe and glass handle. Stainless steel interior. Interior trim to match interior. Black plastic coil covers with fixed black wire rack. Clearvoyant LED dual canopy lights. Rear electrical box mounted behind the lower panel. Gravity (large) with serpentine assist meat model. Solar digital thermometer. Remote DX refrigeration package. Available Options Available lengths: 4', 6', 8' and 12'. Case heights available: 52-1/2" and 54-1/2". Alternate flexible base heights include: 9" and 11"H. Extruded polymer base trim. Painted metal base trim. Master with nose bumper. Cart bumper (for flat front profile). Exterior stainless steel finish. Solid surface or stone case top. Integrated casetop scale stand. Adjustable scalestand. White plastic coil covers. Adjustable wire racks. Reflective rear load doors. Black glass gasket, wipe and glass handle. Rear flip -up work boards. ISO outlet/CON outlets. Solid interior mirror polish stainless steel, thermal glass divider or glass ends. Remote glycol or CO2 refrigeration packages. (1)12" Stainless steel upper shelf. eST�s &P, 2017 70E COMPLIANT Intertek Intertek Dover Food Retail Conyers, GA USA 844.591.5937 NffJJAM soersix hillphoenix.com a�co, paw 02018 Hillphoenix, Inc. S01 SSAM-RG v0318 Service Single -Deck Merchandiser w/ Curved Lift Glass SSAM-RG REMOTE GRAVITY - 4', 6', 8' & 12' Electrical Data Model Fans per Case High Efficiency Fans Anti -Condensate Fans Drain Heaters Optional Defrost Heaters 120 Volts 120 Volts 120 Volts 208 Volts 240 Volts Amps Watts Amps Watts Amps Watts Amps Watts Amps Watts SSAM-RG 4' ---1 --- --- --- --- --- --- --- --- --- 6' --- --- --- --- --- --- --- --- --- --- --- 8' --- --- --- --- --- --- --- --- --- -- 12' --- --- --- --- --- --- --- --- --- --- --- Lighting Data I I Model Lights per Row Light Length (ft) Clearvoyant 4 LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps Watts Amps Watts SSAM-RG I I 4' 1 4 0.05 5.9 0.12 14.9 6' 2 3 0.08 9.4 0.20 23.8 8' 2 4 0.10 11.8 0.24 29.8 12' 3 4 0.15 17.7 0.36 44.7 uumennes at uontroi settings (uA) Model Conventional 4BTU H/ft Parallel 5BTUH/ft Superheat Set Point @ Bulb (OF) Evaporators,' (OF) Discharge Air (OF) Discharge Air$ Velocity (FPM) I SSAM-RG DX 316 243 6-8 20 28 - - - DX w/ Misting System2'3 130 119 6-8 20 30 - - Defrost Controls Model Defrosts9 per Day Run -Off Time (min)10 Electric Defrost Timed -Off Defrost Hot Gas Defrost Fail -Safe (min) Termination Temp (IF) Fail -Safe (min) Termination11 Temp (OF) Fail -Safe (min) Termination Temp (IF) SSAM-RG DX 2 5 --- --- 105 42 20 60 DX w/ Misting System 1 6 1 5 - - - - - - 1 105 42 20 60 1 NOTE: "- -" indicates data not applicable. 2 Recommended misting system setup is 30 seconds misting at 6 minute intervals. 3 The provided 'DX w/ Misting System' data includes all guidelines and control settings for the entire case system. Do NOT add any additional BTUH to the listed ratings unless specified here in the case notes section. 4,5 Add 130 BTUH for misting pump and 5.5 amps for water pump. 6 Serpentine coil requires 320F SST. 7 Evaporator temperature is to be set at 150 when a shelf is in use. 8 Average discharge air velocity at peak of defrost. 9 Units equipped with RH systems require 2 defrosts per day with a fail-safe of 120 minutes. 10 Run-off time (min) for hot gas defrost only. 11 Defrost termination temperature for the suction manifold. * Listed data is based on the factory recommended default fresh meat temperature settings. * Shelves are not recommended for fresh meat applications. Engineered for stores with ambient conditions not to exceed 750and 55% relative humidity. Due to engineering improvements specifications may change without notice. All measurements are taken per ASHRAE - 72 - 2005 specifications. Hillphoenix refrigerated display cases for sale in the United States meet or exceed Su. department of energy 2017 efficiency requirements. Numbers are based on standard case sizes. Consult engineering. I*(& Intertek Intertek Z O 1 '7 OOO Cleary • yantM COMPLIANT - I I � LED SYSTEM Hi//phoenix garlr SPECIALTY PROD O CES 04/18 SSAM-RG Hi//phoersix (Remote Gravity) ° °°"`" `°" NY SLIDING 13 9/16 in REAR LOAD DOORS 7[34.4 cm] 21 1/2 in' [54,6 cm] 18 1/4 in 50 1/2 [46.4 cm] [128.3 cin m] 30 3/4 in 1 1 [78.1 cm]--j 28 1/8 in [71.4 cm]L]77777zj) O 22 15/16 in [58.3 cm] 7 in [17.8 cm] ELECTRICAL BOX 4 1/16 in [10.2 cm] 39 7/8 in _ [101.3 cm] 45 3/8 in [115.2 cm] 24 in [61.0 cm] (4') 36 in [91.4 cm] (6' & 8') 72 in [182.9 cm] (12') 24 13/16 in [63.0 cm] 20 in [50.8 cm] 20" x 10" RECOMMENDED POWER SUPPLY ELECTRICAL STUB UP LOCATION 12 in 1 3/4 in 30.5 cm] `DRAIN CONNECTION ///TOEKICK [4.4 cm] I 15 in [38.1 cm] 1 (FLAT REAR SILL) 19 3/4 in [50.2 cm] XTENDED REAR SILL) 33 9116 in [85.2 cm] (FLAT REAR SILL) 38 5/16 in [97.3 cm] (TENDED REAR SILL) 45 318 in [115.3 cm] (FLAT REAR SILL) 501/8 in[127.3 cm] ------ - - - - (EXTENDED REAR SILL) 1 1 1/2 in REFRIGERATION TOEKICK [3.8 cm] FRONT OF CASE 48 in[121.9 cm] (4' case) 72 in [182.9 cm] {6'case} c \ 1 Ir/T�/ us ON 96 in [243.8 cm] {8' case} 144 in [365.8 cm] {12' case} 39 7/8 in [101.3 cm] (FLAT REAR SILL) 44 5/8 in [113.3 cm] (TENDED, REAR SILL) 1 1/2 in [3.8 cm] K Intertek Intertek 04/18 SSAM E RG/SSFM E RG MEAT/SEAFOOD To ensure proper functionality and optimum performance, it is STRONGLY recommended that Hillphoenix specialty cases be installed/serviced by qualified technicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-authorized installation/service contractors, please visit our website at www.hillphoenix.com. Hi//p/`s o e" ix® NSFR c#L 2 0 17 A DOVER COMPANY US DOE COMPLIANT COMPONENT 02/21 Hi//p/toeryix® A DOVER COMPANY LIABILITY NOTICE For Cases with Shelf Lighting Systems Hillphoenix does NOT design any of its shelf lighting systems or any of its display cases with shelf lighting systems for direct or indirect exposure to water or other liquids. The use of a misting system or water hose on a display case with a shelf lighting system, resulting in the direct or indirect exposure of the lighting system to water, can lead to a number of serious issues (including, without limitation, electrical failures, fire, electric shock, and mold) in turn resulting in personal injury, death, sickness, and/or serious property damage (including, without limitation, to the display itself, to the location where the display is situated [e.g., store] and to any surrounding property). DO NOT use misting systems, water hoses or other devices that spray liquids in Hillphoenix display cases with lighted shelves. If a misting system or water hose is installed or used on a display case with a shelf lighting system, then Hillphoenix shall not be subject to any obligations or liabilities (whether arising out of breach of contract, warranty, tort [including negligence], strict liability or other theories of law) directly or indirectly resulting from, arising out of or related to such installation or use, including, without limitation, any personal injury, death or property damage resulting from an electrical failure, fire, electric shock, or mold. PO79211M, REVO R-744 (CO2) NOTICE For Systems Utilizing R-744 (CO2) Refrigerant For refrigeration units that utilize R-744 (CO2), pressure relief and pressure -regulating relief valves may need to be installed based on the system capacity. The valves need to be located such that no stop valve is posi- tioned between the relief valves and the parts or section of the system being protected. When de -energizing refrigeration units containing R-744 (CO2), venting of the R-744 (CO2) refrigerant may occur through the pressure regulating relief valves. These valves are located on the refrigeration system and not on the case model. If venting does occur, the valve must not be defeated, capped, or altered by any means. WARNING: Under no circumstances should any component be replaced or added without consulting Hill - phoenix Field Service Engineering. Utilizing improper components may result in serious injury to persons or damage to the system. Important At Hillphoenix°, the safety of our customers and employees, as well as the ongo ing performance of our products, are top priorities. To that end, we include impor- tant warning messages in all Hillphoenix installation and operations handbooks, accompanied by an alert symbol paired with the word "DANGER", "WARNING", or "CAUTION". All warning messages will inform you of the potential hazard; how to reduce the risk of case damage, personal injury or death; and what may happen if the in- structions are not properly followed. 1 � . Indicates an immediate threat of death or seri- ous injury if all instructions are not followed carefully. 1 - Indicates apotential threat of death or serious injury if all instructions are not followed care- fully. 1 Indicates that failure to properly follow instruc- tions may result in case damage. iv Revision History • new manual format_06/12 • energy data_09/12 • endviews_12/12 • parts list and dixell operating instructions_01/13 • energy data_03/13 • energy data_03/14 • endviews and energy data_09/14 • support diagram and parts page_02/15 • energy data and warranty_04/16 • DOE, CV4 energy data, endview/diagram updates, LED lighting, Dixell operating instructions removal, electrical hookups, multi -case bolt locations, wiring diagrams and UL cord/plug "same type" state- ment_09/19 • warranty_10/19 • technical reference_02/21 u SSAM AG Service Single -Deck Merchandiser w/ Curved Lift Glass 4', 6', 8', 10' & 12' (Meat/Seafood) GENERAL NOTES: • --" Indicates that the feature is not an option on this case model and/or the data is not yet available at this time. SHIPPING WEIGHT Case Weight SSAM-RG --- 2017 00E NSF c �L us ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. SSAM-RG Rev. Date Rev. # Rev. Title 10-30-20 1 NEW STANDARDS Clean,-- ar Hi//phoeoix. 2 SSAM-RG Service Single -Deck Merchandiser w/ Curved Lift Glass 4', 6', 8', 10' & 12' (Meat/Seafood) ELECTRICAL DATA Fans High Efficiency Fans Anti -Condensate Fans Drain Heaters Optional Defrost Heaters Case Per 120 Volts 120 Volts 120 Volts 208 Volts 240 Volts Length Case Amps Watts Amps Watts Amps Watts Amps Watts Amps Watts 4' --- --- --- --- --- --- --- --- --- --- --- 6' --- --- --- --- --- --- --- --- --- --- 8' --- --- --- --- --- --- --- --- --- --- --- 10' --- --- --- --- --- --- --- --- --- --- --- 12' --- -- --- --- --- --- --- --- --- --- --- LIGHTING DATA Case Length Lights Per Row Light Length Clearvoyant 4 LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps Watts Amps Watts 4' 1 4' 0.05 5.9 0.12 14.9 6' 2 3' 0.08 9.4 0.20 23.8 8' 2 4' 0.10 11.8 0.24 29.8 10, 2 5' 0.12 15.0 0.30 37.0 12' 3 4' 0.15 17.7 0.36 44.7 GUIDELINES AND CONTROL SETTINGS (DX) BTUH/ft Superheat Set Point @ Bulb (°F) Evaporator (°F) Discharge Air (°F) Discharge Air Velocity (FPM) Conventional Parallel DX 316 243 6-8 20 28 --- DX w/ Misting System 130 119 6-8 20 30 --- NOTES: • -- " Indicates that the feature is not an option on this case model and/or the data is not yet available at this time. • Recommended misting system setup is 30 seconds misting at 6 minute intervals. • The provided 'DX w/ Misting System' data includes all guidelines and control settings for the entire case system. • For the 'DX w/ Misting System', do NOT add any additional BTUH's to the listed ratings unless specified here in the case notes section. • Add 130 BTUH for misting pump and 5.5 amps for water pump. • Serpentine coil requires 32°F SST. • Evaporator temperature is to beset at 15°F when a shelf is in use. • Listed discharge air velocity represents the average velocity at the peak of defrost. • Units equipped with RH systems require 2 defrosts per day with a fail-safe of 120 minutes. • Run-off time (min) for hot gas defrost only. • Defrost termination temperature for the suction manifold. • Listed data is based on the factory recommended default fresh meat temperature settings. • Shelves are not recommended for fresh meat applications. 2017 D OBE NSF cL us N. ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. SSAM-RG Rev. Date Rev. # Rev. Title 10-30-20 1 NEW STANDARDS Clearv.,^yan Hi//p/`soersix SSAM-RG DEFROST CONTROLS Run -Off Defrosts Time Per Day (Min) DX 2 5 DX w/ Misting System 6 5 201 7 130E CNSF) II: @w COM aL.ANT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. Service Single -Deck Merchandiser w/ Curved Lift Glass 4', 6', 8', 10' & 12' (Meat/Seafood) Electric Defrost Termination Fail -Safe Temp (Min) (°F) Timed -Off Defrost Termination Fail -Safe Temp (Min) (°F) 105 42 105 42 SSAM-RG Rev. Date Rev. # Rev. Title 10-30-20 1 NEW STANDARDS Hot Gas Defrost Termination Fail -Safe Temp (Min) (°F) 20 60 20 60 Clearvyant Hi//p/`soersix in SLIDING REAR LOAD DOORS 13 9/16" [34.4 cm] 10 G �s F- A`2✓ E cEi W N F c> = rob m W 0 = � W N � � 30 3/4"(�8.1 W N w °m1 E ca �Z cl� T O U O � A ELECTRICAL BOX 4 1/16" [10.2 cm] n, N r 39 13/16" [101.1 cm] 45 3/8" [115.2 cm] 24"[61.0 cm] ...... ..... .._,.. .....,... .,..,_,.,. _.._...,... p�± Service Single -Deck Merchandiser w/ Curved Lift Glass SSAM-RG 4', 6', 8', 10' & 12' (Meat/Seafood) POWER SUPPLY E L� O 5"J E cEi N V 2017 DOE NSF c L us ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. 48 [121.9 cm] {4' case} 72" [182.9 cm] {6' case} -96" [243.8 cm] (8' case) 1" [2.5 cm] 120" [304.8 cm1 {10' case} 144" [365.8 cm] {12' case} SSAM-RG Rev. Date Rev. # Rev. Title 10-30-20 1 NEW STANDARDS Clearv.,^yant Hi//p/`soe"F-W 5 SSFM-RG Service Single -Deck Merchandiser w/ Flat Lift Glass 4', 6', 8', 10' & 12' (Meat/Seafood) GENERAL NOTES: • --" Indicates that the feature is not an option on this case model and/or the data is not yet available at this time. SHIPPING WEIGHT Case Weight SSFM-RG I --- 2017 70E NSF c@us ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. SSFM-RG Rev. Date Rev. # Rev. Title 11-18-20 1 NEW STANDARDS Clean,-- ar Hi//phoeoix. n u SSFM-RG Service Single -Deck Merchandiser w/ Flat Lift Glass 4', 6', 8', 10' & 12' (Meat/Seafood) ELECTRICAL DATA Fans High Efficiency Fans Anti -Condensate Fans Drain Heaters Optional Defrost Heaters Case Per 120 Volts 120 Volts 120 Volts 208 Volts 240 Volts Length Case Amps Watts Amps Watts Amps Watts Amps Watts Amps Watts 4' --- --- --- --- --- --- --- --- --- --- --- 6' --- --- --- --- --- --- --- --- --- --- --- 8' --- --- --- --- --- --- --- --- --- --- --- 10' --- --- --- --- --- --- --- --- --- --- --- 12' --- --- --- --- --- --- --- --- --- --- --- LIGHTING DATA Case Length Lights Per Row Light Length Clearvoyant 4 LED Lighting (Per Light Row) Standard Power (Cornice or Shelf) High Power (Cornice) 120 Volts 120 Volts Amps Watts Amps Watts 4' 1 4' 0.05 5.9 0.12 14.9 6' 2 3' 0.08 9.4 0.20 23.8 8' 2 4' 0.10 11.8 0.24 29.8 10, 2 5' 0.12 15.0 0.30 37.0 12' 3 4' 0.15 17.7 0.36 44.7 GUIDELINES AND CONTROL SETTINGS (DX) BTUH/ft Superheat Discharge Air Set Point @ Bulb Evaporator Discharge Air Velocity Conventional Parallel (°F) (°F) (°F) (FPM) DX 316 243 6-8 20 28 --- DX w/ Misting System 130 119 6-8 20 30 --- NOTES: • --" Indicates that the feature is not an option on this case model and/or the data is not yet available at this time. • Recommended misting system setup is 30 seconds misting at 6 minute intervals. • The provided 'DX w/ Misting System' data includes all guidelines and control settings for the entire case system. • For the 'DX w/ Misting System', do NOT add any additional BTUH's to the listed ratings unless specified here in the case notes section. • Add 130 BTUH for misting pump and 5.5 amps for water pump. • Serpentine coil requires 32°F SST. • Evaporator temperature is to be set at 15' when a shelf is in use. • Listed discharge air velocity represents the average velocity at the peak of defrost. • Units equipped with RH systems require 2 defrosts per day with a fail-safe of 120 minutes. • Run-off time (min) for hot gas defrost only. • Defrost termination temperature for the suction manifold. • Listed data is based on the factory recommended default fresh meat temperature settings. • Shelves are not recommended for fresh meat applications. 2017 D OBE NSF cL us N. SSFM-RG ALL MEASUREMENTS ARE TAKEN PER Rev. Date Rev. # Rev. Title ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE 11-18-20 1 NEW STANDARDS UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. CIearv.,^yank Hi//p/`soersix 7 SSFM-RG Service Single -Deck Merchandiser w/ Flat Lift Glass 4', 6', 8', 10' & 12' (Meat/Seafood) DEFROST CONTROLS Defrosts Per Day Run -Off Time (Min) Electric Defrost Timed -Off Defrost Hot Gas Defrost Fail -Safe (Min) Termination Temp (°F) Fail -Safe (Min) Termination Temp (°F) Fail -Safe (Min) Termination Temp (°F) DX 2 5 --- --- 105 42 20 60 DX w/ Misting System 6 5 --- --- 105 42 20 60 201 7 DOE ON-V C �L wANT ALL MEASUREMENTS ARE TAKEN PER ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX REFRIGERATED DISPLAY CASES FOR SALE IN THE UNITED STATES MEET OR EXCEED DEPARTMENT OF ENERGY 2017 REQUIREMENTS. SSFM-RG Rev. Date Rev. # Rev. Title 11-18-20 1 NEW STANDARDS Clearvyant Hi//p/`soersix n per± Service Single -Deck Merchandiser w/ Flat Lift Glass SSFM-RG 4', 6', 8', 10' & 12' (Meat/Seafood) POWER SUPPLY E U W r E jU U U � � N V N - m ro N V SLIDING 19 1/2" [49.6 cm REAR LOAD DOORS E � leis E U U M N ��✓ M cp W.a. N 30 4 31"!)8.7 ro v E � � U M W � U y N � N n A ELECTRICAL BOX 4" [10.2 cm] 39 7/8" [101.3 cm] 45 3/8" [115.2 cm] 24" [61.0 cml __.. ..._.. ..__......_.. . _____ ___..._.. 48" [121.9 cm] {4' case} 72" [182.9 cm] {6case} -96" [243.8 cm] {8' case 1" [2.5 cm] 120" [304.8 cm] {10' case} 144"[365.8 cm]{12'case} 201 7 c DOE NSF L us COS SSFM-RG CIear v.,^yant ALL MEASUREMENTS ARE TAKEN PER Rev. Date Rev. # Rev. Title ASHRAE-72-2005 SPECIFICATIONS. HILLPHOENIX H///p/`fo@I7�JC REFRIGERATED DISPLAY CASES FOR SALE IN THE 11-18-20 1 NEW STANDARDS ...... UNITED STATES MEET OR EXCEED DEPARTMENT - OF ENERGY 2017 REQUIREMENTS. 9 Thank you for choosing Hillphoenix for your food merchandising needs. This handbook contains important technical information and will assist you with the installation and operation of your new Hillphoenix specialty cases. By closely following the instructions, you can expect peak performance; attractive fit and finish; and long case life. We are always interested in your suggestions for improvements (e.g. case design, technical documents, etc.). Please feel free to contact our Marketing Services group at the number listed below. Thank you for choosing Hillphoenix, and we wish you the very best in outstanding food merchandising. CASE DESCRIPTION This manual specifically covers the SSAM-RG and SSFM-RG meat and seafood application, service single -deck merchan- diser. STORE CONDITIONS Hillphoenix cases are designed to operate in an air-condi- tioned store that maintains a 75°F (24°C) store temperature and 55% (max) relative humidity (ASHRAE conditions). Case operation will be adversely affected by exposure to excessively high ambient temperatures and/or humidity. REFRIGERATION SYSTEM OPERATION Air-cooled condensing units require adequate ventilation for efficient performance. Machine -room temperatures must be maintained at a minimum of 65°F in winter and a maximum of 95°F in summer. Minimum condensing temperatures should be no less than 70°F. SHIPPING CASES Transportation companies assume all liability from the time a shipment is received by them until the time it is delivered to the consumer. Our liability ceases at the time of shipment. RECEIVING CASES Examine fixtures carefully and in the event of shipping dam- age and/or shortages, please contact the Service Parts Department at the number listed below. CASE DAMAGE Claims for obvious damage must be 1) noted on either the freight bill or the express receipt and 2) signed by the carrier's agent; otherwise, the carrier may refuse the claim. If damage becomes apparent after the equipment is unpacked, retain all packing materials and submit a written request to the carrier for inspection within 14 days of receipt of the equipment. Failure to follow this procedure will result in refusal by the carrier to honor any claims with a consequent loss to the consumer. If a UPS shipment has been damaged, retain the damaged material, the carton and notify us at once. We will file a claim. LOST/MISSING ITEMS Equipment has been carefully inspected to insure the highest level of quality. Any claim for lost/missing items must be made to Hillphoenix within 48 hours of receipt of the equip- ment. When making a claim please use the number listed below. SERVICE & TECHNICAL SUPPORT For service or technical questions regarding specialty cases, please contact our Specialty Products Division Service Department at 1-319-293-3777. For questions regarding our refrigeration systems or electrical distribution centers, please contact our Systems Division Customer Service Department at 1-770-388-0706. CONTACTING THE FACTORY If you need to contact Hillphoenix regarding a specific fixture, be certain that you have both the case model number and serial number (this information can be found on the data tag, located on the top -left interior of the case). When you have this information, call the number below and ask for a Service Parts Representative. Hillphoenix Specialty Products 703 Franklin Street, PO Box 478 Keosauqua, IA 52565 Tel: (319) 293-3777/Fax: (319) 293-3776 Website: www.hillphoenix.com 10 LOCATION This refrigerated display case has been designed for displaying and storing perishable food product. It is engineered for air- conditioned stores with a maximum ambient of 75 ° F and 55% relative humidity. 4 When selecting the location for placement of this case, avoid the following conditions: Excessive Air Movement 1. Doors 2. Air-conditioned vents 3. Other air sources Excessive Heat 1. Windows 2. Sun 3. Flood lamps 8 feet or less from the product 4. Other heat sources MOVING CASES Hillphoenix display cases are generally shipped to stores with casters installed on the base frame. The casters make the job of moving cases easier for everyone involved in the shipping and installation process, as well as reducing the chance of damage from raising and lowering cases with "Y' bars to place them on dollies, skates or rollers. In most situations, one or two persons can easily move the case into position. When the cases arrive at the store, simply roll them on to the store floor to the proper staging area. Occasionally, cases are shipped with longitudinal brace boards attached to help with stabilization. In these instances, the casters should not be removed until the case is in place. Removing the casters is an easy process. Simply flatten and remove the cotter pins that are holding the casters in place (Fig. 1). Then lift the case with a "Y' bar and slide the caster assemblies out. The dismantled casters can now be discarded. FLOOR PREP 1. Ask the general contractor if your current copy of the build- ing dimensions are the most recently issued. Also, ask for the points of reference from which you should take dimen- sions to locate the cases. 2. Using chalk lines or a laser transit, mark the floor where the cases are to be located for the entire lineup. The lines should coincide with the outside edges of the case feet. 3. Move case as close as possible to its permanent location. Remove all crating and shipping braces above the ship- ping pallet. Loosen the plastic dust cover from the pallet, but leave cover over the case to protect it while removing the case from the pallet. Carefully, lift case up and off the pallet. Remove dust cover. Installation hardware ships in a marked packet located inside the case. Leveling is necessary to ensure proper operation of the refrigeration system and drainage of the condensate. Locate the highest point on the positioning lines as a ref- erence for determining the proper height of the shim -pack levelers. A laser transit is recommended for precision and requires just one person. Level adjustable feet by twisting, if applicable, or shim as necessary under vertical supports as this will help ensure that the case is not settling over time. 5. Locate vertical support positions along the chalk line (Fig 2). Spot properly leveled shim packs at each support loca- tion. Fig. 1 Cotter pin attaches caster to case SUPPORTS Fig. 2 Vertical supports Locate the vertical supports under unit before removing from pallet. Failure to do so will dam- age the finished metal if correct lift points are not identified prior to removal. 11 These cases are not designed for excessive external weight. Do not walk on top or inside of cases. Doing so may result in case damage and/or personal injury. LINE-UP & INSTALLATION Single Case 1. Move the case into position. Using a "Y' bar, raise the end of the case (under cross support), and lower the horizontal support on to the shim packs. Repeat on the other end of the case. Be certain that your hands and feet are out of 5 the way before lowering the case. Failure to do so may result in serious injury. 2. Once the case is properly placed on the shim packs, check the vertical plumb of the case by placing a bubble level on the rear wall. Add/remove shim packs as needed. For the horizontal level, repeat this process after placing the bubble level on the front sill. 3. Install the bumper, if applicable, into pre -attached bumper track and snap into place. 4. After sufficient time has passed to allow for bumper shrinkage, cut away the excess bumper for final fit and fin- ish. Be certain to use an appropriate cutting tool (tubing - or PVC -cutter) to ensure a smooth cut. 5. Install case shelves and reconnect lights. Be aware that differing shelf configurations will affect energy consump- tion and case performance. 6. Install toekick back onto the base of case. Multi -Case 1. Remove any shelves (discard the shelf clips) and/or loose items from the cases that may interfere with case joining. Keep all loose items as they will be used later in the instal- lation process. Fig. 3 Bolt locations The stub -up location can be found under the tank on the customer left. See diagram on page 15 for access loca- tions. 6. Apply case -to -case watershed (supplied) over the end frame seam (Fig. 4). The watershed prevents water from settling in the case joint. 7 0 2. Follow the single -case installation instructions for the first case, excluding #6, then position the next case in the line- 10 up approximately 3' away. 3. Move the second case to a position that is approximately 6" from the first case, then position case on the shim packs. 4. Push the cases tightly together, then lightly bolt them together through the holes provided (Fig. 3). Tighten all the joining bolts until all margins are equal. Be careful not to over tighten. Fig. 4 Sealing the pipe chase Repeat steps 3-6 of this sequence for all remaining cases. Be certain to properly level all cases. Properly align the front panels as needed, then install, if applicable, front panel trim (supplied). Install the bumper into pre -attached bumper track and snap into place. After sufficient time has passed to allow for bumper shrinkage, cut away the excess bumper for final fit and fin- ish.Be certain to use an appropriate cutting tool (tubing- or PVC -cutter) to ensure a smooth cut. 11. Install case shelves and reconnect lights. Be aware that differing shelf configurations will affect energy consump- tion and case performance. 12. Install toekick back onto the base of case. 12 1=�I Installation of 3rd-party materials may result in diminished case performance. 13 REFRIGERATION Refrigeration connections will be made through the refrigera- tion stub up location on the customer left side of the case. Refrigeration lines may be headed together for all cases in a line-up, if necessary, by lines through the access holes with a high grade silicon to prevent recirculation. All lines must be correctly sized. See diagram on page 15 for access locations. If it becomes necessary to penetrate the case bottom for any reason, make certain it is sealed afterward with canned -foam sealant and white RTV. � 7certai!nthaIt7all piping connections are com- oaodes. Fill I 1� =11 I I IR If any brazing is necessary, place wet rags around the area to avoid tank damage. PLUMBING The drain outlet or "P" trap (Fig. 5) is shipped loose with the case and made from a 1 1/2" PVC pipe. Care should be given to ensure that all connections are water -tight and sealed with the appropriate PVC or ABS cement. Fig. 5 "P" trap / drain outlet Drain lines can be run left or right of the tee with the proper pitch to satisfy local drainage requirements. When connecting the PVC to the existing floor drains be sure to provide as much downhill slope as possible and avoid long runs of drain lines. Do not install condensate drains in contact with non -insulated suction lines in order to prevent condensate from freezing. Install the 1 1/2" PVC trap, which is provided with the case. All drains must be trapped. Before operating the case, be certain to remove the styrofoam shipping block that protects the plumbing lines during ship- ping. 7Becertain that all plumbing connections are liant with local codes. Be sure to remove all styrofoam shipping blocks from piping and refrigerant lines. Failure to do so may result in case damage. ELECTRICAL Electrical hookups are made through the power supply box that can be accessed by removing the rear panel. For case -to -case wiring, run conduit between the power supply boxes or run wiring through the raceway. When connecting to the power supply on the case, field wiring should exit box from the side furthest away from case wiring to allow more room in- side for wiring connections. Always check the data tag located on left end exterior panel or top interior of the case. The case must be grounded. For more detailed electrical wiring infor- mation (see Appendix Al). Be certain that all electrical connections are compliant with local codes. CAUTION, RISK OF ELECTRIC SHOCK. If the cord or plug becomes damaged, replace only with a cord and plug of the same type. 14 MECHANICAL ACCESS LOCATIONS 24 in [61.0 cm] (4') 36 in [91.4 cm] (6' & i 72 in [182.9 cm] (12') 2413/16 in [63.0 cm] 20 in [50.8 cm] POWER SUPPLY 12 in 1 3/4 in 30.5 cm] [4.4 cm] 15 in[38.1 cm] --- -- -- (FLAT REAR SILL) 19 3/4 in [50.2 cm] (EXTENDED REAR SILL) 33 9/16 in [85.2 cm] (FLAT REAR SILL) 38 5/16 in [97.3 cm] (EXTENDED REAR SILL) 45 3/8 in [115.3 cm] (FLAT REAR SILL) 50 118 in [127.3 cm] (EXTENDED REAR SILL) 1 1/2 in [3.8 cm] REFRIGERATION 20" x 10" RECOMMENDED ELECTRICAL STUB UP LOCATION TDRAIN CONNECTION FRONT OF CASE -48 in[121.9 cm] {4' case)- 72 in [182.9 cm] (6' case) 96 in[243.8 cm] (8' case) 144 in [365.8 cm] {12' case) 39 718 in [101.3 cm] (FLAT REAR SILL) 44 5/8 in [113.3 cm] (TENDED, REAR SILL) 1 1/2 in [3.8 cm] 15 GENERAL LIGHTING INFORMATION Hillphoenix cases are equipped with LED luminaires and fea- ture specially designed light reflectors in the cornice to improve the illumination of products. LED power supplies operate both the cornice and shelf lights and are located above the cornice reflectors. The lighting system has an ON/OFF switch located in the race- way, power box or at the inside back of the case. Once a case has been properly positioned in the store and an electrician has connected the lighting circuit, the lights may be turned on to verify that they are connected and functioning properly. To ensure peak performance, it is advisable to run the lighting systems only when the store climate control is on and case refrigeration is started. Note: It is highly recommended that the ambient store temperature not exceed 80°F. SHOCK HAZARD Always disconnect power to case when cleaning, servicing or configuring components of the light- ing system. Failure to do so may result in serious injury or death. Using improper DC power supplies may damage the luminaires, resulting in sub -standard opera- tion and increased chances of safety issues/ injury. Never replace a 24V DC power supply with a T8 or T5 ballast of any kind! Ballasts use alternating current (AC) instead of direct current (DC) and operate at a much higher voltage than is used by this LED system. Doing so will damage the LED system and increases the chance of safety issues/injury. LED DRIVER/POWER SUPPLY BOX need for any significant maintenance for several years. Should a power supply need to be removed and/or replaced, turn off the power to the case before proceeding. Be certain to replace the power supply with genuine Hillphoenix parts or a compa- rable UL-listed Class-2 rated regulated 24V DC power supply with 10OW output capacity. Fig. 6 LED driver/ power supply box LED LUMINAIRES Removing LED luminaires: 1. Unplug the luminaire (Fig. 7). 2. Remove the screws from the light clamps (Fig. 8) while keeping ahold of the light. Once the screws are removed the light rod will come away from the case with the clamps To gain access to the LED driver or power supplies remove the rear panel (Fig. 6). The power supply can be located at the cus- 3 tomer left side of the case. REPLACING LED LIGHTS Once store power is connected and the light circuit is ener- gized, the Clearvoyant LED system should operate without the 4 still holding to the light. Fig. 7 LED light power cord Remove the closed clamps and inner rings (Fig. 9) by unclipping the clamp ends located above the screw open- ing. This will release the grip around the inner ring (Fig. 10) and allow for the two pieces to be separated from one another. Carefully remove the inner rings from around the light rod. 16 OPP! II Too much tension on the inner clamp rings while removing them from an LED light rod may cause breakage. Use only enough tension for removal. Fig. 8 LED light & ring / clamp Fig. 9 Closed clamp Fig. 10 Open clamp Re -installing LED luminaires: 1. Place a ring (Fig. 11) around each end of the light rod and rotate until both edges of the rod line-up and snap ahold to the ridges in the ring. 2. Slide a clamp (Fig. 11) over each ring and close them tight around the rings by clipping together the clamp ends located above the screw opening. 3. Line-up the closed clamps (Fig. 9) and light rod with the existing screw holes on the case and re -attach. 4. Rotate the light rod into desired position after the clamps are firmly re -attached. Fig. 11 LED ring and clamp 17 Before powering -up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and compliance with warranty terms. ❑ Have you thoroughly examined the case for shipping damage? (see pg. 10) ❑ Have you checked the vertical plumb of the case? The horizontal level? (see pg. 12) ❑ Have you applied the sealant to the end breakers of adjoining cases? (see pg. 12) ❑ Have you sealed the case -to -case joints by applying caulk and acrylic tape to the end frame seam? (see pg. 12) ❑ Have you installed the toekick? (see pg. 12) ❑ Have you removed the shipping blocks from the refrigeration and plumbing lines? (see pg. 14) After powering -up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and compliance with warranty terms. 1. Check all lights to ensure they are all functioning properly. 2. Check case temperature and adjust controller as needed. IN AIRFLOW & PRODUCT LOAD Hillphoenix cases provide maximum product capacity within the refrigerated air envelope. Please keep products within the ap- propriate load limit. It is important that you do not overload the food product display so that it impinges on the airflow pattern (Fig. 12). Overload- ing will cause malfunction and the loss of proper temperature levels. Mg. iZ wirriow par[ern Always keep product within the designated air curtain. Failure to do so may result in case malfunction and product losing proper tempera- ture, resulting in sub -standard operation and increased chances of food contamination. DEFROST & TEMPERATURE CONTROLS Cases are equipped with either Electric, Hot Gas or Timed -Off defrost at the owner's option. The hot gas defrost termination sensor bulb and probe are attached to the dump line which is in the front, left-hand side of the case. DETERMINING SUPERHEAT To identify proper superheat settings, complete the following: 1. Obtain suction pressure from access port; obtain suction line temperature from area near TXV bulb at the outlet of evaporator coil. 2. Using the suction pressure reading, convert pressure to temperature using temperature pressure chart (see Appendix 81). 3. Finally, subtract the converted temperature reading from the actual temperature reading for superheat setting. 19 CASE CLEANING A periodic cleaning schedule should be established to maintain proper sanitation, insure maximum operating efficiency, and avoid the corrosive action of food fluids on metal parts that are left on for long periods of time. We recommend cleaning once a week. Further suggestions for case cleaning include the fol- lowing: • To avoid shock hazard, be sure all electrical power is turned off before cleaning. In some installations, more than one disconnect switch may have to be turned off to completely de -energize the case. • All surfaces pitch downward to a deep -drawn drain trough, funneling liquids to the center of the case where the waste outlet is located for easy access. Check the waste outlet to insure it is not clogged before starting the cleaning process and avoid introducing water faster than the case drain can carry it away. • To clean the LED luminaires, shut off the lights in the case, then wipe the luminaires down with a soft, damp cloth. Avoid using harsh or abrasive cleaners as they may dam- age the lights. Be certain that the luminaires are complete- ly dry before re -energizing. • Clean from top to bottom when cleaning the display case to avoid cross contamination. • If any potentially harmful cleaners are used, be certain to provide a temporary separator (e.g., cardboard, plastic wrap, etc.) between those cases that are being cleaned and those that may still contain product. • Avoid spraying any cleaning liquids directly on the electrical connections. • Allow cases to be turned off long enough to clean any frost or ice from coil and pans. • Remove toekick and clean underneath the case with a broom and a long -handled mop. Use warm water and a dis- infecting cleaning solution when cleaning underneath the cases. SHOCK HAZARD Always disconnect power to case when servicing or cleaning. Failure to do so may result in serious injury or death. Rear Load Doors 1. Remove the rear sliding doors on the back of the case and clean. To remove: push up and pull out (Fig. 13). 2. Use a spray bottle filled with an approved mild detergent and warm water. 3. Use a clean, disposable cloth (approved item) to thorough- ly clean all areas of the case. 4. Wipe down doors with a clean, disposable cloth (approved item) 5. Place the cleaned doors on a clean sanitized surface until they are dry. Fig. 13 Rear load door removal 20 0 Anthony" THIS DOCUMENT CONTAINS IMPORTANT INFORMATION ABOUT CLEANING YOUR ULTRAVISIONO ANTI -REFLECTIVE GLASS! PLEASE READ AND FOLLOW THESE INSTRUCTIONS TO PREVENT DAMAGE TO THE ANTI -REFLECTIVE COATINGS. SOVIS ULTRAVISION° tempered glass specialized Anti -Reflective coatings on each surface of the glass. These coatings reduce the glare from lighting so that the products on display are more visible to your customers. While the Anti -Reflective coatings are durable, they are susceptible to scratching if abrasive materials are used for cleaning. Once the glass surfaces are scratched, it is impossible to restore the original finish. Special care must be taken to prevent damage when cleaning the glass. SOVIS recommends the following products for routine cleaning of ULTRAVISION° Anti -Reflective glass: Cleaning Cloths — two products are recommended... • Scotch-Briteo High Performance Cloth — manufactured by 3M°and available in most grocery stores under the name Scotch-Briteo Microfiber Cleaning Cloth in a 12" x 14" size. This cloth is washable and may be reused as long as it remains clean. • Spontex° Microfibre Cleaning Cloth — distributed by Spontex° and available in most grocery stores under the same name in a 15.75" x 12" size. This cloth is washable and may be reused as long as it remains clean. Cleaning Fluid — for more difficult cleaning jobs, these products are recommended... • Windex° - standard product only (extra -strength or specialty products may not be suitable) • Glass -Plus° - standard product only (extra -strength or specialty products may not be suitable) • Exceed° Multi -Surface & Glass Cleaner — from Kay Chemical Company, Greensboro, NC • Warm Water Note: equivalent store -brand glass cleaning products are normally acceptable substitutes to the brand name products listed above. The cleaning cloths named above will normally remove dust, grease, oil, and fingerprints without the need for cleaning fluids. A light spray of the cleaning fluids listed above will reduce the time required for cleaning. These materials have been tested and proven to clean ULTRAVISION° glass without scratching or damaging the Anti -Reflective coatings. If you need assistance with obtaining these materials, please contact your display case supplier. Under no circumstances should the following types of materials be used for cleaning glass with ULTRAVISION° Anti -Reflective coatings. • Coarse Paper Towels • Scouring Pads or Powders • Steel Wool or Steel Fiber Materials Do not use these materials for cleaning glass. • Blades • Acidic or highly Alkaline detergents go • Fluorine based detergents 21 Contact the Service Parts Department at: 319-293-3777 Provide the following information about the part you are ordering: • Model number and serial number* of the case for which the part is intended. • Length of the part (if applicable). • Color of part (if painted) or color of polymer part. • Whether part is for left or right-hand application. • Quantity *Data tag is located on the left end exterior panel or top interior of the case. If the parts are to be returned for credit, contact the Parts Department. Do not send parts without authorization. 22 Al.................................................................................................... Wiring Information B1...................................................................... Sporlan Pressure -Temperature Chart Cl.................................................................................................................... Parts List Al: WIRING DIAGRAM Vacuum -Inches of Mercury `70 N TEMPERATURE PRESSURE CHART - at sea level Bold Italic Figures TEMPERATURE REFRIGERANT SPORLAN CODE (°F) (°C) 134a (J) 404A (S) 507 (P) 717 (A) 744-0O2 -60 -51.1 21.8 7.3 5.8 18.6 79.9 -55 -48.3 20.3 3.9 2.2 16.6 91.1 -50 -45.6 18.7 0.1 0.9 14.3 103.4 -45 -42.8 16.9 2.0 3.0 11.7 116.6 -40 -40.0 14.8 4.3 5.4 8.8 131.0 -35 -37.2 12.5 6.8 8.1 5.4 146.5 -30 -34.4 9.8 9.6 11.0 1.6 163.1 -25 -31.7 6.9 12.7 14.1 1.3 181.0 -20 -28.9 3.7 16.0 17.6 3.6 200.2 -18 -27.8 2.3 17.4 19.1 4.6 208.3 -16 -26.7 0.8 18.9 20.6 5.6 216.5 -14 -25.6 0.4 20.4 22.2 6.7 225.0 -12 -24.4 1.1 22.0 23.8 7.8 233.8 -10 -23.3 1.9 23.6 25.5 9.0 242.7 -8 -22.2 2.8 25.3 27.3 10.3 251.9 -6 -21.1 3.6 27.0 29.1 11.5 261.3 -4 -20.0 4.6 28.8 30.9 12.9 271.0 -2 -18.9 5.5 30.7 32.8 14.3 280.9 0 -17.8 6.5 32.6 34.8 15.7 291.0 1 -17.2 7.0 33.6 35.8 16.4 296.2 2 -16.7 7.5 34.6 36.9 17.2 301.5 3 -16.1 8.0 35.6 37.9 18.0 306.8 4 -15.6 8.5 36.6 39.0 18.8 312.1 5 -15.0 9.1 37.7 40.1 19.6 317.6 6 -14.4 9.6 38.7 41.1 20.4 323.1 7 -13.9 10.2 39.8 42.3 21.2 328.6 8 -13.3 10.8 40.9 43.4 22.1 334.2 9 -12.8 11.3 42.0 44.5 22.9 339.9 10 -12.2 11.9 43.1 45.7 23.8 345.7 11 -11.7 1 12.5 44.3 46.9 24.7 1 351.5 TEMPERATURE REFRIGERANT SPORLAN CODE (°F) (°C) 134a (J) 404A (S) 507 (P) 717 (A) 744-0O2 12 -11.1 13.1 45.4 48.1 25.6 357.4 13 -10.6 13.8 46.6 49.3 26.5 363.4 14 -10.0 14.4 47.8 50.5 27.5 369.5 15 -9.4 15.0 49.0 51.8 28.4 375.6 16 -8.9 15.7 50.2 53.0 29.4 381.8 17 -8.3 16.4 51.5 54.3 30.4 388.0 18 -7.8 17.0 52.7 55.6 31.4 394.3 19 -7.2 17.7 54.0 56.9 32.4 400.7 20 -6.7 18.4 55.3 58.3 33.5 407.2 21 -6.1 19.1 56.6 59.6 34.6 413.8 22 -5.6 19.9 58.0 61.0 35.7 420.4 23 -5.0 20.6 59.3 62.4 36.8 427.1 24 -4.4 21.3 60.7 63.8 37.9 433.8 25 -3.9 22.1 62.1 65.3 39.0 440.7 26 -3.3 22.9 63.5 66.7 40.2 447.6 27 -2.8 23.7 64.9 68.2 41.4 454.6 28 -2.2 24.5 66.4 69.7 42.6 461.7 29 -1.7 25.3 67.8 71.2 43.8 468.8 30 -1.1 26.1 69.3 72.7 45.0 476.1 31 -0.6 26.9 70.8 74.3 46.3 483.4 32 0.0 27.8 72.4 75.9 47.6 490.8 33 0.6 28.6 73.9 77.5 48.9 498.3 34 1.1 29.5 75.5 79.1 50.2 505.8 35 1.7 30.4 77.1 80.7 51.6 513.4 36 2.2 31.3 78.7 82.4 52.9 521.2 37 2.8 32.2 80.3 84.1 54.3 529.0 38 3.3 33.1 82.0 85.8 55.7 536.9 39 3.9 34.1 83.7 87.5 57.2 544.8 40 4.4 35.0 85.4 89.2 58.6 552.9 41 1 5.0 1 36.0 87.1 91.0 1 60.1 1 561.0 Pressure -Pounds Per Square Inch Gauge TEMPERATURE REFRIGERANT SPORLAN CODE (°F) (°C) 134a (J) 404A (S) 507 (P) 717 (A) 744-0O2 42 5.6 37.0 88.8 92.8 61.6 569.3 43 6.1 38.0 90.6 94.6 63.1 577.6 44 6.7 39.0 92.4 96.5 64.7 586.0 45 7.2 40.1 94.2 98.3 66.3 594.5 46 7.8 41.1 96.0 100.2 67.9 603.1 47 8.3 42.2 97.9 102.1 69.5 611.7 48 8.9 43.2 99.8 104.1 71.1 620.5 49 9.4 44.3 101.7 106.0 72.8 629.3 50 10.0 45.4 103.6 108.0 74.5 638.3 55 12.8 51.2 115.3 118.3 83.4 684.4 60 15.6 57.4 126.0 129.2 92.9 733.1 65 18.3 64.0 137.3 140.7 103.2 784.2 70 21.1 71.1 149.3 153.0 114.2 838.1 75 23.9 78.7 162.0 165.9 125.9 894.9 80 26.7 86.7 175.4 179.6 138.4 954.9 85 29.4 95.2 189.5 194.1 151.8 1018 90 32.2 104.3 204.5 209.3 166.1 ** 95 35.0 113.9 220.2 225.4 181.2 ** 100 37.8 124.2 236.8 242.3 197.3 ** 105 40.6 135.0 254.2 260.1 214.4 ** 110 43.3 146.4 272.5 278.8 232.5 ** 115 46.1 158.4 291.8 298.5 251.6 ** 120 48.9 171.2 312.1 319.2 271.9 ** 125 51.7 184.6 333.3 340.9 293.3 ** 130 54.4 198.7 355.6 363.8 315.8 ** 135 57.2 213.6 379.1 387.8 339.6 ** 140 60.0 229.2 403.7 413.0 364.7 ** 145 62.8 245.7 429.6 439.5 391.0 ** 150 65.6 262.9 456.8 467.4 418.7 ** 155 1 68.3 12811.0 1485.5 1497.0 1447.8 1** To determine subcooling for R-404A use BUBBLE POINT values (Temperatures above 507 - Gray Background); to determine superheat for R-404A, use DEW POINT values (Temperatures 507 and below). ** = exceeds critical temperature FORM IC-11-09 COPYRIGHT 2009 BY SPORLAN VALVE COMPANY, WASHINGTON, MO 63090 Printed in U.S.A. n 2 a Cl: PARTS LIST A Lift Glass Hardware B Light Guard C Case Top D Front Lift Glass E Die Board F Front Toekick G Insulated Drain Pan H End Panel Trim I End Panel J End Toekick K Outside Back L Electrical Box M Bottom Deck N Bottom Deck Wire Riser 0 Inside Back P Sliding Rear Load Doors Q Strut R Drain Trough S Gravity Coil Hi//p/�oerip ix. A OOYER , OMPANv Hill PHOENIX, Inc. Hereinafter Referred To As Manufacturer LIMITED WARRANTY GENERAL WARRANTY Manufacturer's products are warranted to be free from defects in materials and workmanship under normal use and maintenance for fourteen months from date of shipment from manufacturer (the "Base Warranty Period"). In the event of a qualifying warranty claim, a new or rebuilt part to replace any defective part will be provided without charge. The replacement part is covered under this warranty for the remainder of the applicable Base Warranty Period. In order to be eligible for warranty coverage, customer must: (i) notify Manufacturer promptly upon discovery of a warrant defect, and (ii) comply with the warranty claim procedures provided by Manufacturer from time to time. This equipment warranty does not include labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing, or handling of either defective parts or replacement parts. The warranty shall not apply: 1. To any unit or any part thereof which has been subject to accident, alteration, negligence, misuse or abuse, or which has not been operated in accordance with the manufacturer's recommendations, or in conditions outside of Manufacturer's specifications, or if the serial number of the unit has been altered, defaced, or removed. 2. When the unit, or any part thereof, is damaged by fire, flood, or other act of God. 3. To products that are impaired or damaged due to improper installation. 4. When installation and startup forms are not properly completed or returned within two weeks after startup. 5. If the defective part is not returned to the Manufacturer. 6. To service, maintenance or wear and tear parts (such as lights, starters and ballasts) MODIFICATIONS TO GENERAL WARRANTY The following sets forth certain modifications to the General Warranty for specific products of Manufacturer DISPLAY CASE AND SPECIALTY PRODUCTS CLEARVOYANT® LED LIGHTING The warranty period for Clearvoyant LED lighting components within the Clearvoyant lighting system is five years from date of shipment. REMEDY LIMITATION/DAMAGES EXCLUSION THE REMEDY OF REPAIR OR PROVISION OF A REPLACEMENT PART WITHOUT CHARGE SHALL BE THE EXCLUSIVE REMEDY FOR ANY WARRANTY CLAIM HEREUNDER. WITHOUT LIMITING THE FOREGOING, MANUFACTURER SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFIT, LABOR COST, LOSS OF REFRIGERANT OR FOOD PRODUCTS. EXCLUSIVE WARRANTY THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY WITH RESPECT TO THE PRODUCTS. ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED. NO IMPLIED WARRANTY SHALL BE DEEMED CREATED BY COURSE OF DEALING OR USAGE OF TRADE. NO OTHER PERSON IS AUTHORIZED TO EXPAND OR CREATE ANY OBLIGATION GREATER THAN OR MORE EXPANSIVE THAN THE WARRANTY PROVIDED HEREIN. Submit warranty claims to: Hillphoenix Refrigeration & Power Systems Division 2016 Gees Mill Road Conyers, GA 30013 Warranty / Service Phone:1-833-280-5714 Hillphoenix Display Case Division 1925 Ruffin Mill Road Colonial Heights, VA 23834 Warranty / Service Phone: 1-833-280-5714 Hillphoenix Specialty Products Division 703 Franklin Street Keosauqua, IA 52565 Warranty / Service Phone: 1-833-280-5714 4844-3514-3187.2 Warnin Maintenance & Case Care When cleaning cases the following must be performed PRIOR to cleaning: To avoid electrical shock, be sure all electric power is turned off before cleaning. In some installations, more than one switch may have to be turned off to completely de -energize the case. Do not spray cleaning solution or water directly on fan motors or any electrical connections. All lighting receptacles must be dried off prior to insertion and re -energizing the lighting circuit. Please refer to the Use and Maintenance section of this installation manual. Hi//pftoeffsix® A OOVER COMPANY Tel: 319-293-3777 703 Franklin Street, PO Box 478, Keosauqua, IA 52565 Due to our commitment to continuous improvement, all specifications are subject to change without notice. Hillphoenix is a Sustaining Member of the American Society of Quality. Visit our website at www.hillphoenix.com �f BDMO818 •'