BLD2024-0367+Supplementals_Residential_Addition_Project_Information+3.14.2024_1.45.26_PM+4133090Og FDAI
� OM
v �
4 ;P
Jurisdiction: Edmonds
Project Name: Jones Residence Addition
Application 1D: 1458020
Supplemental Name: Residential Addition Project Information
New (added) Square Footage:
1st Floor
New (added) Square Footage:
2nd Floor
1432
New (added) Square Footage:
3rd Floor
New (added) Square Footage:
Deck(s)
70
New (added) Square Footage:
Garage(s)
New (added) Square Footage:
Storage
Number of NEW bedrooms:
Number of NEW bathrooms:
Total square footage of new or replaced impervious surface:
MyBuildingPermit.com
(Common impervious surfaces include, but are not limited to, roof tops, walkways, patios, driveways, parking lots or storage areas, concrete
or asphalt paving, gravel roads, packed earthen materials, and oiled, macadam or other surfaces that similarly impede the natural infiltration of
stormwater).
70
Total new lot coverage percentage with the addition:
(Structural lot coverage includes the total ground coverage of all buildings or structures on a site measured from the outside of external walls
or supporting members or from a point 2.5 feet in from the outside edge of a cantilevered roof, whichever covers the greatest area).
19.9
Be sure you submit the following to ensure your application is accepted and not delay your project:
1) WA STATE ENERGY CODE: Show R values of insulation and U values of glazing. Show energy credits proposed to meet energy
code requirements.
2) STRUCTURAL CALCULATIONS: Plans which do not meet conventional construction must be designed in accordance with the
structural provisions of the International Building Code by a Washington Sate licensed Design Professional with supporting
calculations.