2024-04-09-Shen-Federman-SW466394 Steel FabricationOTTO ROSENAU & ASSOCIATES, INC.
Geotechnical Engineering, Construction Inspection & Materials Testing
CONSTRUCTION INSPECTION REPORT
Report Number: SW466394
Project Name: Shen -Federman Job Number: 24-0029
Project Address: 23310 Humber Lane, Edmonds Permit: BLD2023-0401
Client Name: DLH, Inc.
Inspections Performed
Steel Decking ❑ Other (specify):
Structural Steel Fabrication U
Structural Steel Erection ❑
Inspector: Ernest Leimkuhler (WABO#: SI 01954) Inspection Date: April 9, 2024
Remarks
At Custom Steel for periodic visual inspection of structural steel, to AWS D1.1, AISC-360, IBC-2018, and signed
approved documents.
Items Inspected: Structural steel components
1. Wide flange (WF)-beam with complete joint penetration (CJP) end plate bracket
Parts: B7
Verified Fit -up.
2. WF-columns with CJP continuity plates
Parts: C1, C2
Verified Fit -up
All CJP Welds require UT inspection for final acceptance
3. W F-beams with shear tabs
Parts: B3, B5
Welder certifications previously verified
Weld Procedure Specifications available on site
All Inspected Items CONFORM to Previously Listed Standards
Conforms
Copies to: c Date: 2024.04.12
f�c
Client U Engineer ❑ Others Technical Responsibility: 1 3:42:46-07'00'
❑ Owner U Contractor
❑ Architect 0 Building Dept Isaac Ruoff, Project Manager
This report applies only to the items tested or reported and is the exclusive property of Otto Rosenau & Associates, Inc. Reproduction of this
report except in full, without written permission from our firm is strictly prohibited.
6747 M.L. King Way S., Seattle, Washington 98118 - Phone (206) 725-4600 - Fax (206) 723-2221
Form No.: ADMIN-63-07 (Rev 01124) Page 1 of 1