Loading...
DNS RESUB1 BLD2021-0088+INSULATION+9.7.2021_2.37.24_PM+2395900RESUB Sep 07 2021 CITY OF EDMONDS DEVELOPMENT SERVICES DEPARTMENT BLD2021-0088 M FOAMULARI FOAMULAWAU TM 250 Features SUPERIOR DURABLE EASY TO CUT, MOISTURE FORM & FIT RESISTANCE Standards, Codes Compliance • Meets ASTM C578 Type IV • UL Classification Certificate U-197 • Code Evaluation Report UL ER8811-01 • ASTM E119 Fire Resistance Rated Wall Assemblies3 • Meets California Quality Standards; HUD UM #71a 3 Visit www.owenscorning.com for more details Applications • Under slabs • Perimeter/Foundation walls • Cavity walls • Precast walls • Weather -resistant barrier (when joints are sealed) EXTRUDED POLYSTYRENE (XPS) RIGID FOAM INSULATION Owens Corning® FOAMULAR° & FOAMULAR® NGXT" 250 Extruded Polystyrene (XPS) Insulation are closed -cell, moisture -resistant rigid foam boards well suited to meet the needs of a wide variety of building applications? Both products are great for above -and below - grade residential and commercial applications such as perimeter/ foundation, cavity wall, precast concrete, under slab, and other applications. FOAMULAR® NGX' 250 contains the additional benefit of being manufactured with a blowing agent formulation that delivers a 90% reduction to Global Warming Potential (100 year), including the complete elimination of HFC 134a.2 1 Not for use in flat or low slope roofing. For low slope roofing applications, use FOAMULAR® & FOAMULAR® NGX'" THERMAPINK® or FOAMULAR® & FOAMULAR® NGX' 400/600/1000 Extruded Polystyrene (XPS) Rigid Foam Insulation. 2 Compared to FOAMULAR® 250 blowing agent formulation. Physical Properties^ PROPERTY TEST METHODS VALUE Thermal Resistance,' R-Value, hr•ft2•°F/Btu (RSI, °C•m2/W) @ 75°F (24°C) mean temperature ASTM C518 5.0 (0.88) @ 40°F (4.4°C) mean temperature 5.4 (0.95) @ 25°F (-3.9°C) mean temperature 5.6 (0.99) Long -Term Thermal Resistance, LTTR-Value', minimum hr•ftz F/Btu (RSI, °C•mz/W) @ 75°F (24°C) mean temperature CAN/ULC S770-03 5.0 (0.88) Compressive Strength', minimum psi (kPa) ASTM D1621 25 (172) Flexural Strength', minimum psi (kPa) ASTM C203 50 (345) Water Absorption', maximum % by volume ASTM C272 0.3 Water Vapor Permeance10, maximum perm (ng/Pa s•m2) ASTM E96 1.5(86) Dimensional Stability, maximum °i linear change ASTM D2126 2.0 Flame Spread" 12 ASTM E84 10 Smoke Developed" 12 ASTM E84 175 Oxygen Index", minimum `o by volume ASTM D2863 24 Service Temperature, maximum °F (°C) 165 (74) Linear Coefficient of Thermal Expansion, in/in/°F (m/m/°c) ASTM E228 3.5 x 10-1 (6.3 x 10-1) 4 Properties shown are representative values for 1"thick material, unless otherwise specified. 5 Modified as required to meet ASTM C578. 6 R means the resistance to heat flow; the higher the value, the greater the insulation power. This insulation must be installed properly to get the marked R-value. Follow the manufacturer's instructions carefully. If a manufacturer's fact sheet is not provided with the material shipment, request this and review it carefully. R-values vary depending on many factors, including the mean temperature at which the test is conducted and the age of the sample at the time of testing. The U.S. FTC requires the R-value of home insulation to be measured at 75 degrees F mean temperature. R-value claims should always be compare at the same mean temperature. Because rigid foam plastic insulation products are not all aged in accordance with the same standards, it is useful to publish comparison R-value data. The R-value for FOAMULAR® & FOAMULAR® NGX- XPS Insulation is provided from testing at mean temperatures of: -4°C (25oF), 4.4°C (40°F), and 24°C (75°F) and aging techniques of 180-day real time aged (as mandated by ASTM C578) and accelerated aging "Long -Term Thermal Resistance" (LTTR) per CAN/ULC S770-03. 7 Values at yield or 10% deflection, whichever occurs first. 8 Value at yield or 5%, whichever occurs first. 9 Data ranges from 0.00 to value shown due to the level of precision of the test method. 10 Water vapor permeance decreases as thickness increases. 11 These laboratory tests are not intended to describe the hazards presented by this material under actual fire conditions. 12 Data from Underwriters Laboratories Inc.® classified. See Classification Certificate U-197. Product Data Sheet I FOAMULAR® & FOAMULARO NGX'" 250 XPS Insulation I December 2020 Technical Information Certifications and Sustainable Features • FOAMULAR° & FOAMULARO NGX' XPS insulation are non-structural materials and must be installed on framing that is independently braced and structurally adequate to meet required construction and service loading conditions. • FOAMULAR° & FOAMULARO NGX` XPS insulation can be exposed to the exterior during normal construction cycles. During that time, some fading of color may begin due to UV exposure, and if exposed for extended periods of time, some degradation or "dusting" of the polystyrene surface may begin. It is best if the product is covered within 60 days to minimize degradation. Once covered, the deterioration stops, and damage is limited to the thin top surface layers of cells. Cells below are generally unharmed and still useful insulation. • FOAMULAR° & FOAMULARO NGX' XPS insulation have a maximum service temperature of 165°F. Install only as much FOAMULAR°& FOAMULARO NGX' XPS insulation as can be covered in the same day. For horizontal applications, always turn the print side down so the black print does not show to the sun, which may at times act as a solar collector, raising the temperature of the foam under the print to an unacceptable level. • Do not cover FOAMULAR° or FOAMULAR® NGX­ XPS insulation either stored (factory wrapped or unwrapped), or partially installed, with dark colored (non -white), or clear (non -opaque) coverings and leave it exposed to the sun. Examples of such coverings include but are not limited to filter fabrics, membranes, temporary tarps, clear polyethylene, etc. If improperly covered and exposed to the right combination of sun, time and temperature, FOAMULARO and FOAMULAR° NGX­ XPS insulation deformation damage may occur rapidly. See Owens Corning publication "Heat Build Up Due to Solar Exposure Technical Bulletin" (Pub. No. 10015704) for more information. • This product is combustible. A protective barrier or thermal barrier is required to separate this product from interior living or conditioned spaces as specified in the appropriate building code. • All construction should be evaluated for the necessity to provide vapor retarders. See current ASH RAE Handbook of Fundamentals. Product and Packaging Data MATERIAL Extruded polystyrene closed -cell foam, ASTM C578 Type IV, 25 psi minimum THICKNESS PRODUCT PALLET(UNIT) (IN) DIMENSIONS DIMENSIONS THICKNESS (TYPICAL) X WIDTH X WIDTH LENGTH (IN) X LENGTH X HEIGHT (FT) 3/4 3/ x24x96 4x8x4 3/4x48x96 4x8x4 half unit 1 1 x24x96 4x8x4 1 x48x96 4x8x8 1 x48x96 4x8x8 (half unit) 1x48x108 4x9x8 11h 1.5x24x96 4x8x8 1.5x48x96 4x8x8 2 2x24x96 4x8x4 PACKAGING Shipped in poly -wrapped units with individually wrapped or banded bundles. SQUARE BOARD BUNDLES PIECES PIECES EDGES FT. PER FT. PER PER PER PER PALLET PALLET PALLET BUNDLE I PALLET 1,920 1,536 4 1,920 1,536 2 1,536 1,536 8 3,072 3,072 8 1,536 1,536 4 3,456 3,456 8 2,048 3,072 8 2,048 3,072538 768 1,6 4 • Certified by SCS Global Services to contain a minimum of 2O% recycled content pre -consumer • GREENGUARD Certified products are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg • Environmental Product Declaration (EPD) has been certified by UL Environment • Qualified as an ENERGY STAR° product, under the U.S. Environmental Protection Agency and the U.S. Department of Energy • Utilizing FOAMULAR°& FOAMULARO NGX'" XPS insulation can help builders achieve green building certifications including the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED°) certification �.ASSIF&O �r QQ Environmental and Sustainability Owens Corning is a worldwide leader in building material systems, insulation and composite solutions, delivering a broad range of high -quality products and services. Owens Corning is committed to driving sustainability by delivering solutions, transforming markets and enhancing lives. More information can be found at www.owenscorning.com. FOAMULARO is manufactured with a polystyrene resin and blend of HFC blowing agents that have a global warming potential (100 year) of less than 750. FOAMULARO NGX` is manufactured with a polystyrene resin and a blend of HFO and HFC blowing agents that have a global warming potential (100 year) of less than 80. Disclaimer of Liability Technical information contained herein is furnished without charge or 30 120 Square Edge obligation and is given and accepted at recipient's sole risk. Because conditions of use may vary and are beyond our control, Owens Scored Corning makes no representation about and is not responsible or Square Edge liable for the accuracy or reliability of data associated with particular Tongue & uses of any product described herein. SCS Global Services provides Groove independent verification of recycled content in building materials and verifies recycled content claims made by manufacturers. For more information, visit www.SCSglobalservices.com. LEED® is a registered trademark of the U.S. Green Building Council. 30 60 24 96 12 96 12 48 12 96 16 128 12 148 Notes 2 x 24 x 108 14X 9 x 8 1,728 3,456 8 12 96 2 x 48 x 96 14x8x8 1,536 3,072 8 6 48 Not for use in roofing. For roofing applications, use FOAMULAR® 21h 2.5x24x96 4x8x8 1,152 2,880 8 9 72 THERMAPINK®XPS insulation. 2.5 x 48 x 96 4x8x8 1,152 2,880 4 9 36 For additional information, refer to the Safe Use Instruction Sheet 3 3 x 24 x 96 4x8x8 1,024 3,072 8 8 64 (SUIS) found in the SIDS Database via http://sds.owenscorning.com. 3 x 48 x 96 4x8x8 1,024 3,072 8 4 32 4 4 x 24 x 96 4 x 8 x 8 768 3,072 8 6 48 4 x 48 x 96 4 x 8 x 8 768 3,072 18 13 124 Available lengths and edge configurations vary by thickness. Other sizes may be available upon request. Consult your local Owens Corning representative for availability. Limited Warranty FOAMULARO & FOAMULAR° NGX` XPS insulation limited lifetime warranty maintains 9O% of its R-value for the lifetime of the building and covers all ASTM C578 properties. See FOAMULAR® Extruded Polystyrene Insulation Lifetime Limited Warranty for complete details, limitations, and requirements. OWENS CORNING FOAM INSULATION, LLC ONE OWENS CORNING PARKWAY TOLEDO, OHIO 43659 USA 1-800-GET-PINK® www.owenscorning.com Pub. No. 43522-P. Printed in U.S.A. December 2020. The color PINK is a registered trademark of Owens Corning. © 2020 Owens Corning. All Rights Reserved.