Loading...
BLD2024-1296+Asbestos+10.2.2024_10.23.22_AM+4536409BLD2024-1296 March 28, 2018 Project No. PS18200370.01 Ms. Jennifer Gloeckner Healthcare Realty 901 Boren Avenue, Suite 100 Seattle, Washington 98104 Subject: Limited "Good Faith" Asbestos and Lead (Pb) Survey Edmonds Medical Plaza, 21701 76th Ave W, Edmonds, Washington Dear Ms. Gloeckner: amec foster wheeler RECEIVED 0" 03 2024 At the request of Healthcare Realty, Amec Foster Wheeler Environment & Infrastructure, Inc. (Amec Foster Wheeler), conducted a Limited "Good Faith" Asbestos and Lead (Pb) Survey at the Edmonds Medical Plaza building located at 21701 76th Ave W, Edmonds, Washington. This sampling was limited to Suites 201 and 202 of the structure. The sampling was completed on March 9, 2018, by Asbestos Hazard Emergency Response Act (AHERA)-certified Building Inspectors, Ms. Susan Kimball and Mr. Anthony Bird. The Limited "Good Faith" Asbestos and Lead Survey included the sampling of 52 suspect asbestos - containing materials (ACM) and 13 suspect lead -containing paint (LCP) coatings. This assessment also included taking an inventory of PCB -containing light ballasts, and mercury -containing fluorescent light tubes, switches, and thermostats. SCOPE OF WORK Amec Foster Wheeler provided an AHERA-certified Building Inspector to survey the renovation project areas in suites 201 and 202. The exterior of the building was not included in this survey. The survey was intended to identify and evaluate the presence and quantity of ACM associated with the planned renovation projects. Amec Foster Wheeler understands that in the project areas, the renovation will likely impact all interior materials within Suites 201 and 202. SITE DESCRIPTION The Edmonds Medical Plaza building is located at 21616 76m Avenue in Edmonds, Washington. The building is a multi -story medical building of wood framed construction. The building sits on a concrete Amec Foster Wheeler Environment & Infrastructure, Inc. 4020 Lake Washington Blvd NE, Suite 200 Kirkland, Washington 98033 (425) 368-1000 Phone (425) 368-1001 Facsimile www.amecfw.com Ms. Jennifer Gloeckner Healthcare Realty March 28, 2018 Page 2of9 I amec 44 foster wheeler slab foundation, and the units surveyed are located on the second floor of the structure. Floor plans of units sampled are included in Attachment 5. LIMITATIONS OF THE INSPECTION The conclusions of the report are professional opinions based solely upon visual site observations, and interpretations of analyses as described in this report. The limits of the surveyed work area were based on discussions with Ms. Jennifer Gloeckner of Healthcare Realty prior to the assessment and are limited to the interior components of suites 201 and 202. The opinions presented herein apply to the site conditions existing at the time of the investigation and interpretation of current regulations pertaining to ACM. Therefore, opinions and recommendations provided herein might not apply to future conditions at the site. The current regulations should always be verified prior to any work involving asbestos or other regulated materials. This survey is not intended to be used as an abatement design document. All existing conditions, quantities, and locations should be verified prior to abatement. The purpose of the survey is to reasonably test for evidence of asbestos in the limited areas described above for the purpose of future common area renovations. It should be noted that no assessment can be comprehensive or exhaustive enough to completely eliminate the possibility that regulated materials are present at the Edmonds Medical Plaza building. Therefore, the completion of this or any survey for hazardous materials should not be considered a warranty or guarantee that these materials do not exist, even if they are not detected through a survey. METHODOLOGY Asbestos -Containing Building Materials The limited "good faith" asbestos survey was performed by an AHERA-certified building inspectors, Mr. Anthony Bird and Susan Kimball, in accordance with a sampling protocol appropriate for the renovation of commercial building spaces. The sampling protocol was modeled after Environmental Protection Agency (EPA) regulation 40 Code of Federal Regulations (CFR) 763, Puget Sound Clean Air Agency (PSCAA) Regulation III, Article 4, and by Washington State Department of Labor and Industries Division of Occupational Safety & Health (DOSH) Regulation Washington Administrative Code (WAC) 296-62-077021. Suspect ACM was grouped into homogeneous sampling areas (HSA) and categorized according to 40 CFR 763, as thermal systems insulation (TSI), surfacing material, or miscellaneous material. Ms. Jennifer Gloeckner Healthcare Realty March 28, 2018 Page 3 of 9 I amec 44 foster wheeler The sampling plan included, at a minimum, the collection and analysis of samples as follows: • Thermal System Insulation - In a distributive manner, a minimum of three (3) samples of each HSA that was not assumed to contain asbestos. - At least one (1) bulk sample from each homogenous area of patched TSI if the patch was less than 6 square feet. • Surfacing Material - In a distributive manner, a minimum of three (3) samples collected from each homogenous area that was 1,000 square feet or less. - A minimum of five (5) samples collected from each homogenous area that was greater than 1,000 square feet but less than or equal to 5,000 square feet. - A minimum of seven (7) samples collected from each homogenous area that was greater than 5,000 square feet. • Miscellaneous Material - Ina distributive manner as deemed sufficient by the Inspector, at least one (1) sample was collected of each suspect miscellaneous material not assumed to contain asbestos. • Non -Suspect Materials - According to 40 CFR 763-86(4), sampling of the following materials are not required where the accredited inspector has deemed the material to be fiberglass, foam glass, rubber, or other recognized non -ACM. Samples were collected by carefully removing small portions of the suspect material with a sharp knife or other hand tool suitable for the material being sampled. Each sample was placed in a labeled plastic container immediately after collection. Sample containers were then placed in a large re - sealable plastic bag for transportation to the laboratory. The sampling instrument was wiped with a clean moist cloth to decontaminate the tool and minimize the potential release of asbestos fibers or contamination of subsequent samples. Data pertinent to each sample (e.g., date, sample number, material description, and material category) was recorded on a field data sheet. The material determination of friability was made by the inspector in the field. The table listing the results further clarified that when a layered sample contains at least one friable layer, then the entire composite sample is determined to be friable. Lead -Containing Paints and Materials Paint chip samples were obtained by carefully scraping the paint layers away from the substrate with a stainless -steel knife blade. Approximately 1 square inch of paint coating was removed for each sample. Samples were then placed into 2-ounce, puncture proof, polyethylene bags and labeled with individual sample numbers. After each sample, the sampling blade was cleaned to reduce the Ms. Jennifer Gloeckner Healthcare Realty March 28, 2018 Page 4 of 9 I amec 44 foster wheeler possibility of cross -contamination. Samples were assigned a unique identifier when placed in sampling containers. Universal Wastes Survey Verifying the presence or absence of universal wastes, either visually or by laboratory analysis, was beyond the scope of this survey. The survey did include quantifying potentially PCB -containing fluorescent light ballasts. All ballasts were assumed to contain PCBs. A similar assumption applies to mercury (Hg) potentially present within fluorescent lamps in fluorescent light fixtures, high intensity discharge lamps, compact fluorescent light bulbs, thermometers, and thermostats. A summary of inventoried universal waste is located in Table 3. Laboratory Analysis Asbestos bulk samples and chain -of -custody submittal sheets were delivered to NVL Laboratories, Inc. (NVL), in SeaTac, Washington, for asbestos analysis. NVL participates in the NVLAP (National Voluntary Laboratory Accreditation Program) for quality control procedures. As specified in 40 CFR Chapter 1 (1-1-87 edition) Part 763, Subpart F, Appendix A, each sample was analyzed using Polarized Light Microscopy (PLM) with dispersion staining techniques, in accordance with EPA Method 600/R-93/116. The detection limit for this type of analysis is approximately one percent (by volume). Materials containing more than 1 percent asbestos are considered to be an ACM. The laboratory analytical data report, chain -of -custody forms, laboratory certification, and inspector certification are provided in the attachments. Paint chips samples were analyzed for percent of lead by weight by NVL using flame atomic absorption according to EPA Method 7000B. NVL participates in the National Environmental Laboratory Accreditation Program (NELAP) and employs American Industrial Hygiene Association (AIHA) quality control procedures. Laboratory analytical data reports and chain -of -custody forms are provided in the attachments. RESULTS Asbestos Amec Foster Wheeler collected 52 samples of suspect ACM. Two of the materials sampled were identified as asbestos -containing materials. These materials are described below in Table 1. A summary of all bulk asbestos sampling and results is presented in Attachment 1, and includes the sample number, homogenous material description, material classification, and analytical results. Ms. Jennifer Gloeckner Healthcare Realty March 28, 2018 Page 5 of 9 Table 1 Summary of Asbestos-Containina Buildina Materials IT amec . foster wheeler Homogenous Sample Homogenous Sample Area Percent Estimated Quantity* Description Asbestos Joint compound on gypsum Interior walls of Suite 202 2% Suite 202, Interior wallboard walls White sheet vinyl with gray fibrous Suite 202, Room 7 47% 80 ft2 backing underneath ceramic tiles Lead -Containing Paint Coatings and Materials A total of 6 paint chip samples were collected from the site buildings. The Washington State Department of Community, Trade, and Economic Development (CTED) defines lead -based paint as coatings with a concentration of lead greater than or equal to 0.5 percent by weight (5,000 fag/g, 5,000 mg/kg, or 5,000 parts per million [ppm] by weight). However, DOSH considers any detectable concentration of lead to be a potential hazard during construction activities. A summary of the lead containing paint chip samples identified is described in Table 2 below. Table 2 Summary of Lead-Containina Paint Samnles Result Sample Number Color Component Substrate Location (% Weight) Suite 201, Pb-01 Dark brown Window sills Wood 0.0091 Room 10 Drywall (under Suite 202, 202-whitegloss-Pb-2 Glossy white Walls orange paint) 0.2500 Room 1 Universal Wastes A tabulated summary of universal wastes potentially impacted during renovations is provided below: Table 3 Summary of Universal Wastes Mercury - Containing Mercury- Mercury- Compact Containing Smoke Containing Fluorescent Light Tubes PCB -Containing Detectors and Location Thermostats Bulbs (4') Light Ballasts Exit Signs Unit 201 7 0 25 10 15 Unit 202 2 17 21 10 12 Ms. Jennifer Gloeckner I Healthcare Realty amec 44 March 28, 2018 foster Page 6 of 9 wheeler CONCLUSION AND RECOMMENDATIONS Asbestos -Containing Building Materials A licensed asbestos -abatement contractor in accordance with WAC 296-62-077 and PSCAA Regulation III, Article 4 must remove all asbestos -containing and asbestos -contaminated building materials prior to disturbance for the demolition project. If additional suspect building materials not identified specifically in this report as either ACM or non -ACM are identified during construction activities, they should be treated as asbestos containing until sampled by an AHERA Building Inspector and proven to not contain asbestos through laboratory analysis. The contractor should use caution when performing renovation or demolition activities within the project areas. Concealed materials may be encountered during the renovation project. ACM may be located between walls, above ceilings, in pipe chases, or other inaccessible areas. If additional suspect building materials not identified specifically in this report as either ACM or non -ACM are identified during construction activities, they should be treated as asbestos -containing until sampled by an AHERA Building Inspector and proven to not contain asbestos through laboratory analysis. Amec Foster Wheeler recommends that the contractor have a copy of this report during renovation activities at the Edmonds Medical Plaza building. Lead -Containing Paint Coatings DOSH considers any detectable concentration of lead to be a potential hazard during construction activities. Amec Foster Wheeler completed representative testing of painted coatings within the site building. Based on this testing, only paint coatings on windows in Suite 201, and on drywall in room 1 of Suite 202 are considered to be lead -containing paint. See Table 2 above for a complete inventory of lead -containing paint coatings. Renovation activities will disturb lead -containing paint coatings and potentially result in worker exposure to lead. Necessary precautions should be taken to prevent or minimize the release of lead in the form of dust, fumes, or mists into the air or into surrounding environments. All workers and supervisory personnel who will be at the job site must be informed of the existing lead hazards, be lead -awareness trained, and be knowledgeable on the precautions and housekeeping procedures necessary to minimize the lead exposure hazard. For work on building components containing lead, which may result in personnel exposures, the contractor must assess the hazard. Based on the assessment, and previous similar work and exposure monitoring results, the contractor may have to provide any or all of the following for employees per WAC 296-155-176: Ms. Jennifer Gloeckner I Healthcare Realty amec 44 March 28, 2018 foster Page 7 of 9 wheeler • Respiratory protection; • Protective clothing; • Clean change areas; • Clean hand -washing facilities; • Biological monitoring to consist of blood sampling and analysis for lead and zinc protoporphyrin levels; and • Hazard communication training. Initial employee exposure monitoring must be conducted for each separate task involving the handling of LCP. If 8-hour time -weighted average (TWA) exposures exceed the action level of 30 micrograms per cubic meter (pg/m3), the contractor must continue to conduct periodic air monitoring at specified intervals, and institute medical surveillance and comprehensive training programs. If the DOSH 8-hour TWA permissible exposure limit of 50 pg/m3 for lead is exceeded, more stringent and additional requirements become effective, such as engineering controls, respiratory protection, regulated work areas and warning signs in lead work areas. The general contractor performing the demolition work should be informed of the presence of lead in the project area. All personnel impacting who come into contact with LCP (or other lead -containing materials) should be provided additional training concerning the health effects of lead, proper work methods, appropriate use of personal protective equipment, and regulations governing lead exposures. Air monitoring to assess lead exposures should be performed for all personnel involved in the demolition process where LCP is removed. Universal Wastes The Washington State Dangerous Waste Regulations, WAC 173-303, designates that discarded transformers, capacitors, or bushings containing PCBs at concentrations of 2 ppm or greater be treated as a PCB -containing material. Light ballasts fall under this regulation. Previous regulations dictated that any material with less than 50 ppm PCBs could be labeled as a non -PCB containing material. Because of this regulatory change, Amec Foster Wheeler recommends that all light ballasts be tracked, removed, handled, and disposed of in an appropriate manner. The ballasts with the "non - PCB" label (or something similar) shall be packaged for recycle by an approved recycling facility. Many fluorescent light tubes, HID lamps, and thermostats contain mercury that is harmful to the environment and human health thus classifying the material as dangerous waste. The EPA and Ecology have placed these materials in a special category of dangerous wastes known as universal Ms. Jennifer Gloeckner Healthcare Realty March 28, 2018 Page 8of9 I amec 44 foster wheeler waste. Some of the requirements included within the Universal Waste Rule for Dangerous Waste Lamps (WAC 173-303-573) include: • Immediately place lamps showing evidence of leakage, damage, etc. in a container following removal. • Containerize in closed, structurally sound, compatible containers. • Cardboard containers may be used for inside storage only. • Labeling container required: "Waste Lamps," or "Universal Waste Lamps." • Track the length of time since waste lamp generation. Acceptable methods of proof include date on label, inventory system, etc. • Respond immediately to potential releases. If determined to be a release, contain and determine whether the release is designated as a dangerous waste. If so, manage the release as specified in WAC 173-303. • Disposal of universal waste as general or construction debris is not permitted. • The crushing of fluorescent light tubes on -site is not allowed. In addition, measures should be taken to prevent breakage of fluorescent light tubes while the light tubes are in transit to their destination. • Provide training to employees on the proper handling and emergency procedures of universal waste lamps. • Track shipments of universal waste lamps with records (invoice, manifest, etc.) kept for a minimum of 3 years. If you have any questions regarding this survey report, please don't hesitate to contact the undersigned. Sincerely yours, Amec Foster Wheeler Environment & Infrastructure, Inc. Sam House Mike Smith, CIH Industrial Hygienist Principal Industrial Hygienist Ms. Jennifer Gloeckner Healthcare Realty March 28, 2018 Page 9of9 Attachment 1 Bulk Sampling and Analysis Record Attachment 2 Laboratory Analytical Report and Chain of Custody Forms Attachment 3 Laboratory Certification Attachment 4 Inspector Certification Attachment 5 Sample Location Drawings c:\users\carl.williams\desktop\edmonds medical plaza\edmonds medical plaza asb and lead report 28mar2018.docx I amec 44 foster wheeler amec foster wheeler ATTACHMENT 1 Bulk Asbestos Sampling and Analysis Attachment 1 — Edmonds Medical Plaza, Suites 201 and 202 — Bulk Asbestos Sampling and Analysis Homogenous Sampling Area Sample Number Description Cat. / Type Location Quantity* Percent Asbestos Suite 201 Carpet mastic, black carpet, strip NF / Misc. Doorway to Room ND All Layers CM-01-1 green mastic, leveling compound, 11 and sheet vinyl with mastic CBM-01-1 Room 11 Wall bases ND All Layers Black cove base with mastic and NF / Misc. taupe strip on vinyl floor F / Misc. ND All Layers GWB-01-1 Khaki pain on gypsum wallboard Room 11, Walls with mud and pink insulation GWB-02-1 Khaki paint over pink gypsum F / Misc. Room 1, Walls ND All Layers wallboard over plywood GWB-03-1 Park brown paint over gypsum F / Misc. Room 1, Walls ND All Layers wallboard over metal frame GWB-01-2 Khaki paint over gypsum wallboard F / Misc. Room 12, Walls ND All Layers over plastic, over wood. GWB-01-3 Khaki paint over gypsum wallboard F / Misc. Room 10, Walls ND All Layers with pink insulation Khaki paint over gypsum wallboard Room 2, Walls ND All Layers GWB-02-2 F / Misc. over wood F/ Misc. Room 3, Walls GWB-02-3 Khaki paint over pink gypsum ND All Layers wallboard DWS-01-1 Black weather stripping around NF / Misc. Room 10, Door ND All Layers doors frame GWB-03-4 Khaki paint over gypsum wallboard F / Misc. Room 3, Walls ND All Layers GWB-02-5 Layers of materials over pink F / Misc. Room 1, Walls ND All Layers gypsum wallboard SUC-01-1 Gray sink undercoating NF / Misc. Room 8, Under sink ND All Layers FORM-01-1 Countertop with brown/tan marble NF / Misc. Room 8 Countertop ND All Layers pattern and mastic Project No. PS18200370.01 A-1 Attachment 1 — Edmonds Medical Plaza, Suites 201 and 202 — Bulk Asbestos Sampling and Analysis Homogenous Sampling Area Sample Number Description Cat. / Type Location Quantity* Percent Asbestos FORM-01-2 Countertop with brown/tan marble NF / Misc. Room 6, Counters ND All Layers pattern and mastic FORM-01-3 Countertop with brown/tan marble NF / Misc. Room 1, Counters ND All Layers pattern and mastic FORM-02-1 Cream with gray dot pattern counter NF / Misc. Room 5, Counters ND All Layers top with mastic CT-02-1 Off white ceiling tile with pin holes F / Misc. Room 8, Ceilings ND All Layers only CT-01-1 Off white ceiling tile F / Misc. Room 8, Ceilings ND All Layers CT-03-1 Off white ceiling tile F / Misc. Room 8, Ceilings ND All Layers Suite 202 1-DW-1 Joint compound and gypsum F / Misc. Room 1, Walls, Suite 202, Demising 2% Chrysotile wallboard Demising Wall wall wallboard system 12-DW-2 Joint compound and gypsum F / Misc. Room 12, Walls, ND All Layers wallboard Demising Wall 10-DW-3 Joint compound and gypsum F / Misc. Room 10, Walls, ND All Layers wallboard Demising Wall 13-IW-1 Joint compound and gypsum F/ Misc. Room 13, Walls, ND All Layers wallboard interior walls 6-IW-2 Joint compound and gypsum F/ Misc. Room 6, Walls, ND All Layers wallboard Joint compound and gypsum interior walls Room 8, Walls, ND All Layers 8-IW-3 F/ Misc. wallboard Carpet and mastic (multiple layers) interior walls ND All Layers 2-C-1 NF / Misc. Room 2, Floors 8-C-2 Carpet and mastic (two layers) NF / Misc. Room 8, Floors ND All Layers 9-C-3 Carpet and mastic over leveling NF / Misc. Room 9, Floors ND All Layers compound Project No. PS18200370.01 A-2 Attachment 1 — Edmonds Medical Plaza, Suites 201 and 202 — Bulk Asbestos Sampling and Analysis Homogenous Sampling Area Sample Number Description Cat. / Type Location Quantity* Percent Asbestos 8-W-1 Faux wood pattern linoleum with NF / Misc. Room 8, Floors ND All Layers khaki mastic 11-W-2 Faux wood pattern linoleum with NF / Misc. Room 11, Floors ND All Layers khaki mastic Faux wood pattern linoleum with Room 12, Floors ND All Layers 12-W-3 NF / Misc. khaki mastic Gray ceramic tiles over white sheet 80 ft2 46% Chrysotile 7-T-1 F / Misc. Room 7, Floors vinyl with gray fibrous backing 4-T-2 Gray ceramic tiles over multiple F / Misc. Room 4, Floors ND All Layers layers of vinyl flooring with mastic/backing Gray ceramic tiles over multiple 4-T-3 F / Misc. Room 4, Floors ND All Layers layers of vinyl flooring with mastic/backing 2-T-4 Gray ceramic tile with black rubber NF / Misc. Room 2, Floors ND All Layers and mastic 3-CB-1 Black vinyl cove base with mastic NF / Misc Room 3, Wall bases ND All Layers 1-FM-1 Faux marble pattern laminate NF / Misc Room 1, ND All Layers countertop with mastic Countertops 6-FM-2 Beige laminate countertop with NF / Misc Room 6, ND All Layers mastic Countertops 7-FM-3 Beige laminate countertop with NF / Misc Room 7, ND All Layers mastic Beige laminate countertop with NF / Misc Countertops ND All Layers 11-FM-4 Room 11, mastic Countertops 2-CT-1 White ceiling tile with pinholes F / Misc Room 2, Ceilings ND All Layers 13-CT-2 White ceiling tile with worm holes F / Misc Room 13, Ceilings ND All Layers Project No. PS18200370.01 A-3 Attachment 1 — Edmonds Medical Plaza. Suites 201 and 202 — Bulk Asbestos Samolina and Analvsis Sample Number Description Cat. / Type Location Homogenous Sampling Area Quantity* Percent Asbestos 3-CT-3 White ceiling tile with worm holes F / Misc Room 3, Ceilings ND All Layers 11-CT-4 White ceiling tile with worm holes F / Misc Room 11, Ceilings ND All Layers 9-CT-5 White ceiling tile with worm holes F / Misc Room 9, Ceilings ND All Layers 4-SG-1 Sink undercoating NF / Misc Room 4, Sink ND All Layers 5-Shelf-1 Brown compressed fibrous shelving NF / Misc Room 5, Shelves ND All Layers 5-Compound-1 Gray compound between rail and concrete NF / Misc Room 5, Rail ND All Layers 5-Insulation-1 Water heater insulation NF / Misc Room 5, Water Heater ND All Layers 5-Panel-1 Wood paneling print laminate board NF / Misc Room 5, Panel board ND All Layers 5-WBS-1 Joint compound and gypsum wallboard F/ Misc. Room 5, Walls ND All Layers Notes/Abbreviations: ACM Asbestos -Containing Material ACT Acoustical Ceiling Tile Bold Indicates asbestos -containing material EA Each F Friable GWB Gypsum Wallboard LF Linear Feet Misc. Miscellaneous ND None Detected NF Nonfriable SF Square Feet Surf. Surfacing VCB Vinyl Cove Base VFS Vinyl Floor Sheeting VFT Vinyl Floor Tile "Quantity only indicated for asbestos -containing materials and surfacing materials Project No. PS18200370.01 A-4 Attachment 1 — Edmonds Medical Plaza, Suites 201 and 202 — Bulk Lead Paint Sampling and Analysis Sample Number Color Component Substrate Location Result (% Weight) Suite 201 Pb-1 Dark brown over cream Window sills Wood Interior Window sills 0.0091 Pb-2 Dark brown over cream Door frames Metal Interior door frames <0.0052 Pb-3 Cream over gray Circuit Breaker Box Metal Circuit breaker boxes <0.0052 Pb-4 Khaki paint Walls Gypsum wallboard Interior walls <0.0053 Suite 202 202-Orange-Pb-1 Orange Walls Gypsum wallboard Interior Walls <0.0051 202-Whitegloss- Pb-2 Glossy white Walls Gypsum wallboard Interior Walls 0.2500 202-Gray-Pb-3 Gray Walls Gypsum wallboard Interior Walls <0.0053 202-Yellow-Pb-4 Yellow Walls Gypsum wallboard Interior Walls <0.0074 202-Whitewindowsill-Pb-5 White Window Sill Wood Interior Window Sills <0.0051 202-Whitedf-Pb-6 White Door Frame Metal Interior Door Frames <0.0053 202-Eggshell-Pb-7 Eggshell Walls Gypsum wallboard Interior Walls <0.0055 202-Khaki-Pb-8 Khaki Walls Gypsum wallboard Interior Walls <0.0066 202-Closet-Pb-9 Brown Closets Wood Interior Closets <0.0048 Notes/Abbreviations: Bold Indicates lead containing paint coating Project No. PS18200370.01 A-5 amec foster wheeler ATTACHMENT 2 Laboratory Analytical Report and Chain of Custody Forms March 16, 2018 Mike Smith AMEC FW- Kirkland 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 RE: Bulk Asbestos Fiber Analysis; NVL Batch # 1804570.00 Client Project: Healthcare Realty Location: Edmonds Medical Plaza Suite 201 Dear Mr. Smith, IN IL L A B S INDUSTRIAL H Y G I E N E SERVICES Laboratory I Management I Training Enclosed please find test results for the 20 sample(s) submitted to our laboratory for analysis on 3/9/2018. Examination of these samples was conducted for the presence of identifiable asbestos fibers using polarized light microscopy (PLM) with dispersion staining in accordance with both EPA 600/M4-82-020, Interim Method for the Determination of Asbestos in Bulk Insulation Samples and EPA 600/R-93/116 Method for the Determination of Asbestos in Bulk Building Materials. For samples containing more than one separable layer of materials, the report will include findings for each layer (labeled Layer 1 and Layer 2, etc. for each individual layer). The asbestos concentration in the sample is determined by calibrated visual estimation. For those samples with asbestos concentrations between 1 and 10 percent based on visual estimation, the EPA recommends a procedure known as point counting (NESHAPS, 40 CFR Part 61). Point counting is a statistically more accurate means of quantification for samples with low concentrations of asbestos. The detection limit for the calibrated visual estimation is <1 %, 400 point counts is 0.25% and 1000 point counts is 0.1% Samples are archived for two weeks following analysis. Samples that are not retrieved by the client are discarded after two weeks. Thank you for using our laboratory services. Please do not hesitate to call if there is anything further we can assist you with. Sincerely, Nick Ly, Technical Director 1.888.NVL.LABS Enc.: Sample Results www.nvilabs.com 1NCW&%V Lab Code. 102063-0 page 1 of 16 NVL Laboratories, Inc. 4708 Aurora Ave N, Seattle, WA 98103 p 206.S47.0100 I f 206.634.1936 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N, SemNe, WA 98103 p 206.547.0100 1 1206.634.193E 1 www.nvllabs.com L A B S Bulk Asbestos Fibers Analysis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804570.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: Healthcare Realty 200 Date Received: 3/9/2018 Kirkland, WA 98033 Samples Received: 20 Attention: Mr. Mike Smith Samples Analyzed: 20 Project Location: Edmonds Medical Plaza Suite 201 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Lab ID: 18024341 Client Sample #: CM-01-1 Location. Edmonds Medical Plaza Suite 201 Layer 1 of 10 Description: Black rubbery material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Resin/Binder None Detected ND None Detected ND Layer 2 of 10 Description: Light tan soft adhesive with loose -fill fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Adhesive/Binder Synthetic fibers 10% None Detected ND Layer 3 of 10 Description: Gray crumbly material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles None Detected ND None Detected ND Layer 4 of 10 Description: Green soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder, Fine particles Synthetic fibers <1% None Detected ND Layer 5 of 10 Description: Tan soft adhesive Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Adhesive/Binder None Detected ND None Detected ND Layer 6 of 10 Description: Beige vinyl Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Vinyl/Binder, Calcareous particles Glass fibers 5% None Detected ND Layer 7 of 10 Description: Yellow brittle mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder, Calcareous particles None Detected ND None Detected ND Sampled by: Client Analyzed by: Alla Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 2 of 16 NVL Laboratories, Inc. I1��!VII .1708 Aurora Ave R Seattle. WA 98103 1 L.. p206517.0100 11 206.b34.1936 I www.nvllabs,corn L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 Batch #: 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 8 of 10 Description: Gray crumbly material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles None Detected ND None Detected ND Layer 9 of 10 Description: Light gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Granules None Detected ND None Detected ND Layer 10of 10 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Granules None Detected ND None Detected ND Lab ID: 18024342 Client Sample #: CBM-01-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 9 Description: Dark brown rubbery material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Rubber/Binder None Detected ND None Detected ND Layer 2 of 9 Description: Yellow soft mastic Non -Fibrous Materials: Other Fibrous Materials.% Asbestos Type: % Mastic/Binder None Detected ND None Detected ND Layer 3 of 9 Description: Beige/tan fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler Cellulose 28% None Detected ND Layer 4 of 9 Description: Tan soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder None Detected ND None Detected ND Sampled by: Client Analyzed by: Alla Prysyazhnyuk Date: 03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1 %=0-3%. 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 3 of 16 NVL Laboratories, Inc. INVIL 4708 Aurora Ave N. Seattle, WA 98103 p 206,547.0100 1 1206.63.1.1936 1 twaw.nvllabston. L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 Batch #: 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 5 of 9 Description: Beige vinyl Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Synthetic foam, Vinyl/Binder Glass fibers 10% None Detected ND Layer 6 of 9 Description: Yellow soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder None Detected ND None Detected ND Layer 7 of 9 Description: Gray crumbly material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles Wollastonite 2% None Detected ND Layer 8 of 9 Description: Off-white sandy material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Granules, Sand None Detected ND None Detected ND Layer 9 of 9 Description: Tan trace compressed fibrous material with yellow mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Cellulose 32% None Detected ND Lab ID: 18024343 Client Sample #: GWB-01-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 3 Description: Yellow soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Mastic/Binder None Detected ND Layer 2 of 3 Description: Off-white compacted powdery material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Binder/Filler, Gypsum/Binder, Paint Cellulose 20% Glass fibers 4% Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Sampled by: Client Analyzed by: Alla Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03116/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 4 of 16 NVL Laboratories, Inc. IN \, �f �rl� 4708 A4V rofa Ave N, Seattle, WA 98103 1 p 2D6.547.0100 1 1206.634.1936 1 www.nvllabs.com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804570.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: Healthcare Realty 200 Date Received: 3/9/2018 Kirkland, WA 98033 Samples Received: 20 Attention: Mr. Mike Smith Samples Analyzed: 20 Project Location: Edmonds Medical Plaza Suite 201 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 3 of 3 Description: Pink fibrous material Non -Fibrous Materials: Binder/Filler Other Fibrous Materials:% Glass fibers 85% Asbestos Type: % None Detected ND Lab ID: 18024344 Client Sample #: GWB-01-2 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 3 Description: White compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles, Paint None Detected ND None Detected ND Mica Layer 2 of 3 Description: Off-white chalky material with paper Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Gypsum/Binder, Mica Cellulose 15% None Detected ND Glass fibers 8% Layer 3 of 3 Description: Pink fibrous material with clear cellophane Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Synthetic/Binder, Cellophane Glass fibers 95% None Detected ND Lab ID: 18024345 Client Sample #: GWB-01-3 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 2 Description: Off-white chalky material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Gypsum/Binder, Paint Glass fibers 7% None Detected ND Cellulose 18% Sampled by: Client Analyzed by: Alla Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-931116 and 600IM4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1 %=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 5 of 16 NVL Laboratories, Inc. IN IL •1708 Aurora Ave N, Seattle, WA 98103 p 20G 547.0100 1 1 206.634,1936 1 www.nvllabs.cotn L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 Batch #: 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 2 of 2 Description: Pink fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler Glass fibers 95% None Detected ND Lab ID: 18024346 Client Sample #: GWB-02-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 2 Description: White thin bumpy compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Calcareous binder, Calcareous particles, Paint None Detected ND Perlite Layer 2 of 2 Description: Peach chalky material with paper & paint Non -Fibrous Materials: Other Fibrous Materials:% Binder/Filler, Gypsum/Binder, Mica Cellulose 19% Glass fibers 10% Lab ID: 18024347 Client Sample #: GWB-02-2 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 2 Description: Off-white/white compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Calcareous binder, Calcareous particles, Paint None Detected ND Perlite Layer 2 of 2 Description: Peach chalky material with paper & paint Non -Fibrous Materials: Other Fibrous Materials:% Binder/Filler, Gypsum/Binder, Paint Cellulose 23% Mica Glass fibers 12% Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Sampled by: Client Analyzed by: Alla Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-931116 and 6001M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 6 of 16 NVL Laboratories, Inc. IN\ IL 4708 Aurora Ave N. Seattle WA 98103 p 206,547.0100 1 1206.634.1936 1 tvww.nvllabs.coni L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 Batch #: 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Lab ID: 18024348 Client Sample #: GWB-02-3 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 3 Description: Off-white/white compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials.% Asbestos Type: % Calcareous binder, Calcareous particles, Paint None Detected ND None Detected ND Perlite Layer 2 of 3 Description: Off-white compacted powdery material with orange paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles, Paint None Detected ND None Detected ND Layer 3 of 3 Description: Peach chalky material with paper & paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Gypsum/Binder, Mica Cellulose 20% None Detected ND Paint Glass fibers 8% Lab ID: 18024349 Client Sample #: GWB-03-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 3 Description: Off-white compacted powdery material with brown paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles, Paint None Detected ND None Detected ND Perlite Layer 2 of 3 Description: Off-white compacted powdery material with white paper Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles, Perlite Cellulose 25% None Detected ND Sampled by: Client Analyzed by: Alta Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 6001M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 7 of 16 NVL Laboratories, Inc. IN IL 4708 Aurnia Ave N. Seattle VIA 98103 p 206.547.0100 1 f 206.634,1936 1 www.nvllabs.com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804570.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: Healthcare Realty 200 Date Received: 3/9/2018 Kirkland, WA 98033 Samples Received: 20 Attention: Mr. Mike Smith Samples Analyzed: 20 Project Location: Edmonds Medical Plaza Suite 201 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 3 of 3 Description: Off-white chalky material with paper Non -Fibrous Materials: Binder/Filler, Gypsum/Binder Other Fibrous Materials:% Cellulose 19% Glass fibers 3% Asbestos Type: % None Detected ND Lab ID: 18024350 Client Sample #: GWB-03-4 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 6 Description: Black rubbery material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Rubber/Binder, Calcareous particles None Detected ND None Detected ND Layer 2 of 6 Description: Off-white soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder None Detected ND None Detected ND Layer 3 of 6 Description: Brown brittle mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder Wollastonite 2% None Detected ND Layer 4 of 6 Description: Off-white compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles, Paint None Detected ND None Detected ND Perlite Layer 5 of 6 Description: Brown brittle mastic Non -Fibrous Materials: Other Fibrous Materials.% Asbestos Type: % Mastic/Binder Wollastonite 2% None Detected ND Layer 6 of 6 Description: Off-white chalky material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Gypsum/Binder, Mica Cellulose 18% None Detected ND Sampled by: Client .h Analyzed by: Alta Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: a samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 8 of 16 NVL Laboratories, Inc. IN IL .1708 Aurora Ave N, Seattle WA 98103 p 206.547.0100 1 1206,634.1936 1 %mmnvllabs.com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 Batch #: 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Paint Glass fibers 12% Lab ID: 18024351 Client Sample #: GWB-03-5 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 3 Description: Off-white compacted powdery material Non -Fibrous Materials: Other Fibrous Materials:% Binder/Filler, Calcareous particles, Perlite None Detected ND Layer 2 of 3 Description: Brown brittle mastic Non -Fibrous Materials: Other Fibrous Materials:% Mastic/Binder Wollastonite 2% Layer 3 of 3 Description: Peach chalky material with paper & paint Non -Fibrous Materials: Other Fibrous Materials:% Binder/Filler, Gypsum/Binder, Mica Cellulose 23% Paint Glass fibers 12% Asbestos Type: % None Detected ND Asbestos Type: None Detected ND Asbestos Type: % None Detected ND Lab ID: 18024352 Client Sample #: CT-01-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 1 Description: Tan compressed fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Glass , Paint Glass fibers 10% None Detected ND Perlite Cellulose 85% Lab ID: 18024353 Client Sample #: CT-02-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 1 Description: Tan compressed fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Binder/Filler, Glass beads, Paint Glass fibers 10% Asbestos Type: % None Detected ND Sampled by: Client _ (✓ - .ter--, Analyzed by: Alla Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories_ Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 9 of 16 NVL Laboratories, Inc. 4708 Aurora Ave N, Seattle. WA 98103 0 206 547.0100 1 f 206.634.1936 1 www.nvllabs.com Bulk Asbestos Fibers Analysis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 IN IL L A B S Batch M 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Perlite Cellulose 87% Lab ID: 18024354 Client Sample #: CT-03-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 1 Description: Tan compressed fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Glass beads, Paint Glass fibers 8% None Detected ND Perlite Cellulose 80% Lab ID: 18024355 Client Sample #: SUC-01-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 1 Description: Gray flaky material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous particles Cellulose 2% None Detected ND Lab ID: 18024356 Client Sample #: DWS-01-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 1 Description: Black foamy material with trace paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Styrofoam, Paint None Detected ND None Detected ND Lab ID: 18024357 Client Sample #: FORM-01-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 5 Description: Clear soft adhesive Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Adhesive/Binder None Detected ND None Detected ND Sampled by: Client Analyzed by: Alla Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 6001R-931116 and 6001M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 10 of 16 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N. Seattle. WA 98103 p 206.547,0100 ; f 206.b34.1936 I www nvllabs.com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste, 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 Batch #: 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 2 of 5 Description: Brown flat hard compressed fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Adhesive/Binder, Binder/Filler Cellulose 95% None Detected ND Layer 3 of 5 Description: Pink soft mastic with wood flakes Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder, Wood flakes None Detected ND None Detected ND Layer 4 of 5 Description: Tan soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder, Calcareous particles, Insect parts None Detected ND None Detected ND Layer 5 of 5 Description: Off-white/tan fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Paint Cellulose 40% None Detected ND Lab ID: 18024358 Client Sample #: FORM-01-2 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 2 Description: Brown flat hard compressed fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Adhesive/Binder, Binder/Filler Cellulose 90% Layer 2 of 2 Description: Pink soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Mastic/Binder None Detected ND Lab ID: 18024359 Client Sample #: FORM-01-3 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 3 Description: Brown flat hard compressed fibrous material with brown surface Non -Fibrous Materials: Other Fibrous Materials:% Adhesive/Binder, Binder/Filler Cellulose 92% Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Sampled by: Client Analyzed by: Alla Prysyazhnyuk Date: 03/15/2018 Reviewed by: Nick Ly Date:03/1612018 Nick Ly, Technical Director Note: If samples are not homogeneous, then sulasamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertaintles for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 11 of 16 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N. SeAttle WA 98103 p 2U6.547.0100 i f 206.634.1936 1 www.nvllabs.com L A B S Bulk Asbestos Fibers Analysis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Plaza Suite 201 Batch #: 1804570.00 Client Project #: Healthcare Realty Date Received: 3/9/2018 Samples Received: 20 Samples Analyzed: 20 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 2 of 3 Description: Pink soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder None Detected ND None Detected ND Layer 3 of 3 Description: Tan trace wooden compressed fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Adhesive/Binder, Binder/Filler Wood fibers 20% None Detected ND Lab ID: 18024360 Client Sample #: FORM-02-1 Location: Edmonds Medical Plaza Suite 201 Layer 1 of 3 Description: Brown flat hard compressed fibrous material with cream surface Non -Fibrous Materials: Other Fibrous Materials:% Adhesive/Binder, Binder/Filler Cellulose 89% Layer 2 of 3 Description: Green soft adhesive Non -Fibrous Materials: Other Fibrous Materials:% Adhesive/Binder None Detected ND Layer 3 of 3 Description: Tan wooden compressed fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Adhesive/Binder, Binder/Filler Cellulose 65% Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Sampled by: Client hh Analyzed by: Alla Prysyazhnyuk Date:03/15/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director (vote: it samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 6001R-931116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%. 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 12 of 16 NVL Laboratories, Inc. ASBESTOS LABORATORY SERVICES IN' IL •1708 Aurora Ave N, Seattle. WA 98103 p 206.547.0100 1 1206.634.1936 1 www,nvllAbs.com L A B S Company AMEC FW- Kirkland NVL Batch Number 1804570.00 Address 4020 Lake Washington Blvd. NE, Ste. 200 TAT 5 Days AH No Kirkland, WA 98033 Rush TAT Project Manager Mr. Mike Smith Due Date 3/16/2018 Time 1:00 PM Phone (425) 368-1000 Email mike.s.smith@amecFW.com Cell (425) 443-4306 Fax (425) 368-1001 Project Name/Number: Healthcare Realty Project Location: Edmonds Medical Plaza Suite 201 Subcategory PLM Bulk Item Code ASB-02 EPA 600/R-93-116 Asbestos by PLM <bulk> Total Number of Samples 20 Rush Samples Lab ID Sample ID Description Airs 1 18024341 CM-01-1 A 2 18024342 CBM-01-1 A A 3 18024343 GWB-01-1 4 18024344 GWB-01-2 A 5 18024346 GW&01-3 A 6 18024346 GWB-02-1 A 7 18024347 GWB-02-2 A 8 18024348 GWB-02-3 A A 9 18024349 OWB-03-1 10 18024350 GWB-03-4 q 11 18024351 1 GWB-03-5 A 12 18024352 CT-01-1 A 13 18024353 CT-02-1 A 14 18024354 CT-03-1 A 15 18024355 SUC-01-1 A 16 18024356 1 DWS-01-1 A 17 18024357 FORM-01-1 A 18 18024358 FORM-01-2 q Print Name Rinnahirp r1 flats Ti— Sampled by Client Relinquished by Client Office Use Only Print Narnp Sinnafura r`mmnanu n.*e T,-- Received by Fatima Khan NVL 3/9/18 1300 Analyzed by Alla Prysyazhnyuk NVL _ 3115118 Results Called b ❑ Faxed ❑ Emailed Special Instructions: Date 3f9/2018 Time, 2,12 PM Entered By Fatima Khan page 13 of 16 NVL Laboratories, Inc. ASBESTOS LABORATORY SERVICES IN IL •1708 Aurorn Ave. N, Seattle, WA 98103 p 206.547.0100 i 1206,634.1936 1 ww%v.nvllabs.cnni L A B S Company AMEC FW- Kirkland NVL Batch Number 1804570.00 Address 4020 Lake Washington Blvd, NE, Ste. 200 TAT 5 Days AH No Kirkland, WA 98033 Rush TAT Project Manager Mr. Mike Smith Due Date 3/16/2018 Time 1:00 PM Phone (425) 368-1000 Email mike.s.smith@amecFW.com Cell (425) 443-4306 Fax (425) 368-1001 Project Name/Number: Healthcare Realty Project Location: Edmonds Medical Plaza Suite 2.01 Subcategory PLM Bulk Item Code ASB-02 EPA 6001R-93-116 Asbestos by PLM <bulk> Total Number of Samples 20 Rush Samples Lab ID Sample ID Description AIR 19 18024359 FORM-01-3 q 20 118024360-- FORM-02-1 A Print Nama Sionature r`mmnnv rlafra T'im& Sampled by Client (Client If L Relinquished by Office Use Only Print Name Sionature rmmnanv Moo Timo Received by Fatima Khan NVL 3/9/18 1300 Analyzed by Alla Prysyazhny_uk NVL 3/15/18 Results Called by ❑ Faxed ❑ Emailed Special Instructions: Dale. 3191201 B Time 2 12 P1vl Enleled 6y Fatima Khan page 14 of 16 1804671) • ���-/IL Turn Around Time ASBESTOS U 1 Hour L] 24 Hours 14 Days L A D S U 2 Hours U 2 Days A 5 Days INDUSTRIAL CHAIN OF CUSTODY U4Hours L]3Days ul0Days H Y G I E N E SERVICES Please call for TAT less than 24 Hours Ubwalory I Mmog.mttrt I Training Company Amec Foster Wheeler Project Manager Mike Smith Address 4020 Lake Washington Blvd. NE Suite 200, Kirkland, WA 98033 Phone cell ( 425 ) 443 - 4306 Email n•lil(c.s.Smith@woodplc.com Fax (425 ) 368. 1101 1 1 Project Name/Number Healthcare Realty Project Location Edmonds Medical Plazas -0 1 ❑ PCM Air (NIOSH 7400) C] TEM (NIOSH 7402) O TEM (AHERA) U TEM (EPA Level II Modified) X PLM (EPA 600/R-" ; I I i ❑ EPA 400 Points (600/R-93-116) ❑ EPA 1000Points (600/R • 1 � I ❑ PLM Gravimetry a II i 1: 13-116) ❑ Asbestos in Vermiculite (EPA 600/R-04/004) ❑ Asbestos in Sediment 11 1,,,. P n �0 Points) Asbestos Friable/Non-Friable (EPA 600/R-93/116) J Other r r l llli,;, 61•; II urr,r please send results to Susan Kimball and Mike Slnith U Call ( I U Fax ( ) W Email susan.kimball@woodplc.com l Total Number of Samples 20 ID /1Sample 4 l �� �� G '� 2-• 5 � i v�l l?,, n ii J 6 C-1 7 �� V \I 1;2 e • 9 Lji,• 1r3'0 — 10 11 t✓� t�� '(j 1ILI) 13 14 15 Description (tip f I,I6� {�1h.v �l�((\I ►� `"'/C�ti PtN'I\ 601.1.:' 0 l L.•l Nt C, I rt tl A/R Print Name Signature Company Date Time r _ Sampled by (. (� /� r\( �,(�L-t i Jt(� �-~' l: P\H Relinquish by r �� Office Use Only —� •rd I r, •d(II1.it+/ / I I IUIIII II }' (I�� lG � r lu Received by Analyzed by Called by Faxed/Email by i ? A7nY Arn— Ann nl C—trin tArA 091 n7 I n 7Aa C47Mnn I I7na a74 107a 1 •...u.u-11'k' �..... page 15 of 16 PA\ 6e 2 © r 2 180-4570 L N 0 a INDUSTRIAL H Y G I E N E SERVICES ta0oralory I Man �errem I Lnlydnq ASBESTOS CHAIN OF CUSTODY Company Amec Foster Wheeler Address 4020 Lake Washington Blvd. NE Suite 200, Kirkland, WA 98033 Phone Turn Around Time U 1 Hour U 24 Hours U9 Days ❑ 2 Hours U 2 Days 5 Days U 4 Hours U 3 Days _J 10 Days Please call for TAT less than 24 Hours Project Manager Mike Smith Cell (425 ) 443 - 4306 Email mike.s.smith@woodplc.com Fax ( 425 ) 368 - 1101 Project Name/Number Healthcare Realty Project Location Edmonds Medical Plaza, 6L, LTt%-;xol U PCM Air (NIOSH 7400) U TEM (NIOSH 7402) ❑ TEM (AHERA) U TEM (EPA Level II Modified) PLM (EPA 600/R-93-116) O EPA 400 Points (600/R-93-116) 0EPA 1000Points (600/R-93-116) O PLM Gravimetry (600/R-93-116) ❑ Asbestos in Vermiculite (EPA 600/R-04/004) ❑ Asbestos in Sediment (EPA 1900 Points) Ld Asbestos Friable/Non-Friable (EPA 600/R-93/116) LO Other Reporting Instructions please send results to Susan Kimball and Mike Smith U Call I >- J Fax t > La Email susan.kimball @woodplc.corn Total Number of Samples Sample ID 1 SCAC --0l- 2 oweb O1- 3 Ir© 5 r— U Rb`- 6 7 8 9 10 11 12 13 14 15 Description t� 11 Print Name Signature Company Sampled by �� Relinquish i q A/R Date , Time Office Use Only _ r Callyl•I'v / ^` Til o Received I{ I 7 n 7ftil.f �Q�,tl ✓�{IF�rI Analyzed I �� r _ - "S� I �< Called by Faxed/Email by A7n0 A.n. Av 41 1AlA 001n3 I n inc cA7r11nn I r7nf.Q7A 107C 1 .........w..II+M.n... page 16 of 16 March 16, 2018 Mike Smith AMEC FW- Kirkland 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 RE: Bulk Asbestos Fiber Analysis; NVL Batch # 1804666.00 Client Project: N-A Location: Edmonds Medical Pavilion Dear Mr. Smith, INS, IL L A B S INDUSTRIAL H Y G I E N E SERVICES Laboratory I Management I Traming Enclosed please find test results for the 27 sample(s) submitted to our laboratory for analysis on 3/12/2018. Examination of these samples was conducted for the presence of identifiable asbestos fibers using polarized light microscopy (PLM) with dispersion staining in accordance with both EPA 600/M4-82-020, Interim Method for the Determination of Asbestos in Bulk Insulation Samples and EPA 600/R-931116 Method for the Determination of Asbestos in Bulk Building Materials. For samples containing more than one separable layer of materials, the report will include findings for each layer (labeled Layer 1 and Layer 2, etc. for each individual layer). The asbestos concentration in the sample is determined by calibrated visual estimation. For those samples with asbestos concentrations between 1 and 10 percent based on visual estimation, the EPA recommends a procedure known as point counting (NESHAPS, 40 CFR Part 61). Point counting is a statistically more accurate means of quantification for samples with low concentrations of asbestos. The detection limit for the calibrated visual estimation is <1%, 400 point counts is 0.25% and 1000 point counts is 0.1% Samples are archived for two weeks following analysis. Samples that are not retrieved by the client are discarded after two weeks. Thank you for using our laboratory services. Please do not hesitate to call if there is anything further we can assist you with. Sincerely, r� Nick Ly, Technical Director 1.888.NVL.LABS Enc.: Sample Results www.nvllabs.com KVI%V Lab Code: 102063.0 NVL Laboratories, Inc. 4708 Aurora Ave N, Seattle, WA 98103 p 206.547,0100 1 f 206.634.1936 page 1 of 18 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N, Seanle. WA 98103 p 2o6 547.0100 1 f 206.634.1936 I www.nvllabs.con, L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received. 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Lab ID: 18024975 Client Sample #: 1-DW-1 Location: Edmonds Medical Pavilion Layer 1 of 2 Description: White compacted powdery material with paint and paper Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Calcareous binder, Paint Cellulose 10% Chrysotile 2% Layer 2 of 2 Description: White chalky material with paper Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Gypsum/Binder, Binder/Filler Cellulose 21 % None Detected ND Glass fibers 6% Lab ID: 18024976 Client Sample #: 12-DW-2 Location: Edmonds Medical Pavilion Layer 1 of 3 Description: White compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Calcareous binder, Paint None Detected ND None Detected ND Layer 2 of 3 Description: White chalky material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Gypsum/Binder, Binder/Filler, Paint Cellulose 21 % None Detected ND Glass fibers 9% Layer 3 of 3 Description: Dark gray fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler Glass fibers 97% None Detected ND Lab ID: 18024977 Client Sample #: 10-DW-3 Location: Edmonds Medical Pavilion Sampled by: Client 57 Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date: 03116/2018 Nick Ly, Technical Director Note. If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 2 of 18 NVL Laboratories, Inc. III VIL 4709 Aurora Ave N, Seattle. WA 99103 p 206 547.0100 1206.63.1 1936 1 www.nvllabs.can L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method. EPA/600/R-93/116 & EPA1600/M4-82-020 Layer 1 of 1 Description: White chalky material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Gypsum/Binder, Binder/Filler, Paint Cellulose 23% None Detected ND Glass fibers 8% Lab ID: 18024978 Client Sample #: 13-IW-1 Location: Edmonds Medical Pavilion Layer 1 of 3 Description: White compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Calcareous binder, Paint None Detected ND None Detected ND Layer 2 of 3 Description: White compacted powdery material with paper Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Calcareous binder, Binder/Filler Cellulose 13% None Detected ND Layer 3 of 3 Description: White chalky material with paper Non -Fibrous Materials: Other Fibrous Materials.% Asbestos Type: % Gypsum/Binder, Binder/Filler Cellulose 25% None Detected ND Glass fibers 6% Lab ID: 18024979 Client Sample #: 64W-2 Location: Edmonds Medical Pavilion Layer 1 of 2 Description: White compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: Calcareous binder, Paint None Detected ND None Detected ND Layer 2 of 2 Description: White chalky material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Gypsum/Binder, Binder/Filler Cellulose 20% None Detected ND Sampled by: Client �7 Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-931116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%. 5%=1-9%. 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 3 of 18 NVL Laboratories, Inc. IN IL.. 4708 Aurora Ave N, Spittle, WA 98103 p 20G,547.0100 1 f 206.63-1.1936 1 www.nvilabs.coil, L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch* 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Glass fibers 5% Lab ID: 18024980 Client Sample M 8-IW-3 Location: Edmonds Medical Pavilion Layer 1 of 2 Description: White compacted powdery material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Calcareous binder, Paint None Detected ND None Detected ND Layer 2 of 2 Description: White chalky material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Gypsum/Binder, Binder/Filler, Paint Cellulose 23% None Detected ND Glass fibers 7% Lab ID: 18024981 Client Sample #: 2-C-1 Location. Edmonds Medical Pavilion Layer 1 of 7 Description: Multi -color fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler Synthetic fibers 78% None Detected ND Layer 2 of 7 Description: Gray woven fibrous material with gray mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Synthetic fibers 56% None Detected ND Layer 3 of 7 Description: Tan/black fibrous material with gray soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Synthetic fibers 74% None Detected ND Layer 4 of 7 Description: Tan woven fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: Binder/Filler Cellulose 89% None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-931116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 4 of 18 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N. Seattle, WA 98103 p 206547.0100 1 t 206.634.1936 1 www.nvllabs.con, L A B 5 Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Pavilion Batch #: 1804666.00 Client Project #: N-A Date Received: 3/12/2018 Samples Received: 27 Samples Analyzed: 27 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 5 of 7 Description: Tan fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler Synthetic fibers 93% None Detected ND Layer 6 of 7 Description: Tan woven fibrous material with gray soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Cellulose 52% None Detected ND Layer 7 of 7 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mineral grains, Fine particles None Detected ND None Detected ND Lab ID: 18024982 Client Sample #: 8-C-2 Location: Edmonds Medical Pavilion Layer 1 of 5 Description: Multi -color fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: Binder/Filler Synthetic fibers 78% None Detected ND Layer 2 of 5 Description: Off-white woven fibrous material with gray soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Synthetic fibers 54% None Detected ND Layer 3 of 5 Description: Tan/black fibrous material with gray soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Synthetic fibers 61% None Detected ND Layer 4 of 5 Description: Tan woven fibrous material with tan mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler. Mastic/Binder Cellulose 68% None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date: 03116/2018 Reviewed by: Nick Ly Date: 03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1 %=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%. 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 5 of 18 NVL Laboratories, Inc. IN IL 1708 Aurora Ave N. Seattle. WA 98103 p 206.547.0100 1 f 206.6341936 1 www.nvl1ab1.c01n L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste, 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Pavilion Batch #: 1804666.00 Client Project #: N-A Date Received: 3/12/2018 Samples Received: 27 Samples Analyzed: 27 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 5 of 5 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mineral grains, Fine particles None Detected ND None Detected ND Lab ID: 18024983 Client Sample #: 9-C-3 Location: Edmonds Medical Pavilion Layer 1 of 7 Description: Multi -color fibrous material with gray soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Synthetic fibers 57% None Detected ND Layer 2 of 7 Description: Tan soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder Synthetic fibers 2% None Detected ND Layer 3 of 7 Description: Tan fibrous with gray soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Cellulose 65% None Detected ND Layer 4 of 7 Description: Tan woven fibrous material with tan soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: Binder/Filler, Mastic/Binder Cellulose 73% None Detected ND Layer 5 of 7 Description: Off-white brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles None Detected ND None Detected ND Layer 6 of 7 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mineral grains, Fine particles None Detected ND None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date: 03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1 %=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 6 of 18 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N, Seattle WA 98103 p 206547.0100 l 1 206.G34.1936 I www.nvllab5.com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location. Edmonds Medical Pavilion Batch #: 1804666.00 Client Project M. N-A Date Received: 3112/2018 Samples Received: 27 Samples Analyzed: 27 Method: EPA/6001R-93/116 & EPA/600/M4-82-020 Layer 7 of 7 Description: White fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler Cellulose 98% None Detected ND Lab ID: 18024984 Client Sample #: 8-W-1 Location: Edmonds Medical Pavilion Layer 1 of 3 Description: Tan compressed hard fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Laminate/binder, Wood flakes Cellulose 87% Layer 2 of 3 Description: Tan soft mastic Non -Fibrous Materials: Other Fibrous Materials-.% Mastic/Binder Cellulose <1 % Layer 3 of 3 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Mineral grains, Fine particles None Detected ND Lab ID: 18024985 Client Sample* 11-W-2 Location: Edmonds Medical Pavilion Layer 1 of 3 Description: Tan compressed hard fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Laminate/binder, Wood flakes Cellulose 83% Layer 2 of 3 Description: Tan soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Mastic/Binder Cellulose <1 % Layer 3 of 3 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Mineral grains, Fine particles None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Sampled by: Client f� Analyzed by: Welly Hsieh Date:03/16/2018 _ Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1 %=0-3%, 5%=1-9%. 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the U5 Government page 7 of 18 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N, Seattle WA 98103 p 206.547.010o 1 1206.634.1936 1 www.nvllabs corn L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Lab ID: 18024986 Client Sample #: 12-W-3 Location: Edmonds Medical Pavilion Layer 1 of 4 Description: Tan compressed hard fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Laminate/binder Cellulose 86% None Detected ND Layer 2 of 4 Description: Beige soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder None Detected ND None Detected ND Layer 3 of 4 Description: Tan soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder Cellulose 10% None Detected ND Layer 4 of 4 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mineral grains, Fine particles None Detected ND None Detected ND Lab ID: 18024987 Client Sample #: 7-T-1 Location: Edmonds Medical Pavilion Layer 1 of 4 Description: Gray ceramic tile Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Ceramic/Binder None Detected ND None Detected ND Layer 2 of 4 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mineral grains, Fine particles None Detected ND None Detected ND Layer 3 of 4 Description: Yellow sheet vinyl Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Vinyl/Binder, Synthetic foam None Detected ND None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director rvole: it samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 arid 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 8 of 18 NVL Laboratories, Inc. IN IL 4709 Aurora Ave N. Seattle. WA 98103 p 206.547.0100 1 1206.634.1936 1 www,nvilabs.com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA1600/M4-82-020 Layer 4 of 4 Description: Gray fibrous backing with mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Cellulose 30% Chrysotile 47% Lab ID: 18024988 Client Sample #: 4-T-2 Location: Edmonds Medical Pavilion Comments: Unsure of correct layer sequence. Layer 1 of 6 Description: Gray ceramic tile Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Ceramic/Binder None Detected ND None Detected ND Layer 2 of 6 Description: Gray soft material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles, Mineral grains Cellulose 2% None Detected ND Layer 3 of 6 Description: Gray compressed hard material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles Cellulose 53% None Detected ND Layer 4 of 6 Description: Multi -color sheet vinyl Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Vinyl/Binder, Synthetic foam None Detected ND None Detected ND Layer 5 of 6 Description: Gray fibrous backing with mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Mastic/Binder Cellulose 47% None Detected ND Glass fibers 28% Layer 6 of 6 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mineral grains, Fine particles Cellulose <1% None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director (vote: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 9 of 18 NVL Laboratories, Inc. IN IL -1708 Aurora Ave N. Seattle WA 98101 p 20G 547.0100 1 1206.631.1936 1 www.nvllabs.corn L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Address: 4020 Lake Washington Blvd. NE, Ste, 200 Kirkland, WA 98033 Attention: Mr. Mike Smith Project Location: Edmonds Medical Pavilion Batch #: 1804666.00 Client Project #: N-A Date Received: 3/12/2018 Samples Received: 27 Samples Analyzed: 27 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Lab ID: 18024989 Client Sample #: 4-T-3 Location: Edmonds Medical Pavilion Layer 1 of 4 Description: Gray ceramic tile Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Ceramic/Binder None Detected ND None Detected ND Layer 2 of 4 Description: Gray compressed hard material Non -Fibrous Materials: Binder/Filler Layer 3 of 4 Description: Multi -color sheet vinyl Non -Fibrous Materials: Vinyl/Binder, Synthetic foam Other Fibrous Materials:% Cellulose 55% Other Fibrous Materials:% None Detected ND Layer 4 of 4 Description: Gray fibrous backing with mastic Non -Fibrous Materials: Other Fibrous Materials:% Binder/Filler, Mastic/Binder Cellulose 31 % Synthetic fibers 8% Glass fibers 16% Lab ID: 18024990 Client Sample #: 2-T-4 Location: Edmonds Medical Pavilion Layer 1 of 4 Description: Gray ceramic tile Non -Fibrous Materials: Other Fibrous Materials:% Ceramic/Binder None Detected ND Layer 2 of 4 Description: Gray soft material Non -Fibrous Materials: Other Fibrous Materials:% Mineral grains, Fine particles Cellulose <1 % Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 6001R-931116 and 6001M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 10 of 18 NVL Laboratories, Inc. IN IL 470E Aurora Ave N, Seattle, WA 98103 p 206.547.0100 1 1206.634.1936 1 www,nvllabs.co"i L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 3 of 4 Description: Black foamy material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Synthetic foam None Detected ND None Detected ND Layer 4 of 4 Description: Gray brittle material with paint Non -Fibrous Materials: Other Fibrous Materials.% Asbestos Type: % Mineral grains, Fine particles, Paint None Detected ND None Detected ND Lab ID: 18024991 Client Sample #: 3-CB-1 Location: Edmonds Medical Pavilion Layer 1 of 4 Description: Black rubbery material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Rubber/Binder None Detected ND None Detected ND Layer 2 of 4 Description: White soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder Cellulose <1 % None Detected ND Layer 3 of 4 Description: Yellow soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder None Detected ND None Detected ND Layer 4 of 4 Description: White chalky material with paper and paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Gypsum/Binder, Binder/Filler, Paint Cellulose 25% None Detected ND Glass fibers 4% Lab ID: 18024992 Client Sample #: 1-FM-1 Location: Edmonds Medical Pavilion Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 _ Reviewed by: Nick Ly Date: 03116/2018 Nick Ly, Technical Director Note: if samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1 %=0-3%. 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in hull, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 11 of 18 NVL Laboratories, Inc. IN I� 4708 AuV roia Ave N. Seattle. WA 9A103 1 p 106.547.0100 1 1206.634.1936 1 www.nvllabs.com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste, Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Layer 1 of 2 Description: Brown flat hard compressed fibrous material with brown surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Laminate/binder Cellulose 67% None Detected ND Layer 2 of 2 Description: Off-white soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder Cellulose 5% None Detected ND Lab ID: 18024993 Client Sample #: 7-FM-3 Location: Edmonds Medical Pavilion Layer 1 of 3 Description: Brown flat hard compressed fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Laminate/binder Cellulose 63% None Detected ND Layer 2 of 3 Description: Off-white soft mastic (on wood) Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder, Wood flakes None Detected ND None Detected ND Layer 3 of 3 Description: Yellow soft mastic Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder Cellulose 2% None Detected ND Lab ID: 18024994 Client Sample #: 11-FM-4 Location: Edmonds Medical Pavilion Layer 1 of 2 Description: Brown flat hard compressed fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Laminate/binder Cellulose 62% None Detected ND Layer 2 of 2 Description: Yellow soft mastic (on wood) Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder Cellulose <1% None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director (vote: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600113-931116 and 600/104-62-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 12 of 18 NVL Laboratories, Inc. I 4708 AurrnN ILa Ave N, Seattle. WA 98103 1 p206547.0100 1 1206.634,1936 1 ,vww.nvIIabs.cum L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Lab ID: 18024995 Client Sample #: 2-CT-1 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Gray compressed fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles, Perlite Cellulose 41% None Detected ND Glass beads, Paint Glass fibers 32% Lab ID: 18024996 Client Sample #: 13-CT-2 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Gray compressed fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles, Glass beads Glass fibers 61% None Detected ND Paint Cellulose 10% Lab ID: 18024997 Client Sample #: 3-CT-2 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Gray compressed fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles, Glass beads Cellulose 46% None Detected ND Perlite, Paint Glass fibers 32% Lab ID: 18024998 Client Sample #: 11-CT-4 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Gray compressed fibrous material with paint Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles, Glass beads Glass fibers 69% None Detected ND Perlite, Paint Cellulose 7% Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%. 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 13 of 18 NVL Laboratories, Inc. IN ' �L 4708 Aurora Ave N, Seattle. WA 98103 1 p 206.547.0100 I (206.(i34.1936 I www.nvllabs,com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW- Kirkland Batch #: 1804666.00 Address: 4020 Lake Washington Blvd. NE, Ste. Client Project #: N-A 200 Date Received: 3/12/2018 Kirkland, WA 98033 Samples Received: 27 Attention: Mr. Mike Smith Samples Analyzed: 27 Project Location: Edmonds Medical Pavilion Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Lab ID: 18024999 Client Sample #: 9-CT-5 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Gray compressed fibrous material with paint Non -Fibrous Materials. Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles, Glass beads Cellulose 45% None Detected ND Perlite, Paint Glass fibers 36% Lab ID: 18025000 Client Sample #: 4-SG-1 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: White flaky material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Calcareous binder, Calcareous particles Cellulose <1% None Detected ND Lab ID: 18025081 Client Sample #: 6-FM-2 Location: Edmonds Medical Pavilion Layer 1 of 2 Description: Brown flat hard compressed fibrous material with tan surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Laminate/binder Cellulose 63% None Detected ND Layer 2 of 2 Description: Off-white soft mastic (on wood) Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Mastic/Binder, Wood flakes Cellulose 3% None Detected ND Sampled by: Client Analyzed by: Welly Hsieh Date:03/16/2018 Reviewed by: Nick Ly Date:03/16/2018 Nick Ly, Technical Director Note: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 6001R-93/116 and 6001M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 14 of 18 NVL Laboratories, Inc. ASBESTOS LABORATORY SERVICES IN IL 4708 Aurora Ave N, Seattle, WA 98103 p 206.547.0100 1 f 206,634.1936 1 www.nvllabstow L A B S Company AMEC FW- Kirkland NVL Batch Number 1804666.00 Address 4020 Lake Washington Blvd, NE, Ste. 200 TAT 5 Days AH No Kirkland, WA 98033 Rush TAT Project Manager Mr. Mike Smith Due Date 3/19/2018 Time 4:35 PM Phone (425) 368-1000 Entail mike.s.smith@amecFW.com Cell (425) 443-4306 Fax (425) 368-1001 Project Name/Number: N-A Project Location: Edmonds Medical Pavilion Subcategory PLM Bulk Item Code ASB-02 EPA 600/R-93-116 Asbestos by PLM <bulk> Total Number of Samples 27 Rush Samples Lab ID Samnle ID rlwsrrintinn ego 1 18024975 1-DW-1 A 2 18024976 12-DW-2 A 3 18024977 10-DW-3 q 4 18024978 13-I W-1 A 5 18024979 6-IW 2 A 6 18024980 8-IW-3 A 7 18024981 2-C-1 A 8 18024982 8-C-2 A 9 118024983 9-C-3 A 10 18024984 8-W 1 A 11 18024985 11-W-2 A 12 18024986 12-W 3 A 13 18024987 7-T-1 A 14 18024988 4-T-2 A 15 18024989 4-T-3 A 16 18024990 2-T-4 A 17 18024991 3-CB-1 A 18 18024992 1-FM-1 A Print Name Signature Company Date Time Sampled by Client Relinquished by Drop Box Office Use Onlv Print Name Sinnnhrre r.mmnanu n.f. Tl— Received by Fatima Khan NVL 3112/18 800 Analyzed by Welly Hsieh NVL 3/16/18 Results Called by ❑ Faxed ❑ Emailed Special Instructions: Date: 3/12/2018 Time: 3.09 PM Entered By Nicholas Dossegger page 15 of 18 NVL Laboratories, Inc. ASBESTOS LABORATORY SERVICES 4708 Auroia Ave N, Seattle, WA 98103 p 206.547.0100 1 1 206.634.193E 1 www.nvllabs.com Company AMEC FW- Kirkland NVL Batch Number 1804666.00 Address 4020 Lake Washington Blvd. NE, Ste. 200 TAT 5 Days AH No Kirkland, WA 98033 Rush TAT Project Manager Mr. Mike Smith Due Date 3/19/2018 Time 4:35 PM Phone (425) 368-1000 Email mike.s.smith@amecFW.com Cell (425) 443-4306 Fax (425) 368-1001 IN IL L A B S Project Name/Number: N-A Project Location: Edmonds Medical Pavilion Subcategory PLM Bulk Item Code ASB-02 EPA 600/R-93-116 Asbestos by PLM <bulk> Total Number of Samples 27 Rush Samples Lab ID Sample Ib [)Pccrintinn AID 19 18024993 7-FM-3 A 20 18024994 11-FM-4 A 21 18024995 2-CT-1 A 22 18024996 13-CT-2 A 23 18024997 3-CT-2 A 24 18024998 11-CT-4 A 25 18024999 9-CT-5 A 26 118025000 4-SG-1 A 27 118025081 6-FM-2 A Print Nnrnoa Signature r1.fo Ti— _ _ Sampled by Client Relinquished by Drap Box Office Use Onlv Print Name Signature C:mmnann.re Ti— Received by Fatima Khan NVL 3/12/18 800 Analyzed by Welly Hsieh NVL 3/16/18 Results Called by ❑ Faxed ❑ Emailed Special Instructions: Dale. 3112120 18 Time 3 09 PM Entered By Nicholas Dossegger page 16 of 18 NVL Laboratories, Inc. CHAIN of CUSTODY 4706 Aurora Ave N, Seattle, WA 98103 Tel: 206.547.0100 Emerg.Pager: 206.344.1878 SAMPLE LOG Fax: 206.634.1938 1.888.NVL.LABS (685,5227) Client A Street A ► - fir, Project Manager ; (� Project Location Phone: ,39`i,C„��6�6 Fax: ❑�sbe—stos Alf o PCM (NIOSH 7400) —[YJ A bee o, rya #tr '180.466f� NVL Batch Number Client Job Number _ Total Samples . Tum Around Time ❑ 1-Hr ❑ 24-Hrs J'Days ❑ 2-Hrs ❑ 2 Days L 5 Days ❑ 4-Hrs ❑ 3 Days O 6 to 10 Days Please call for TAT less Than 24 Hrs Email address _' t"C" TEM (NIOSH 7402) p TEM (AHERA) ❑ TEM (EPA Level li) p Other _ s toe Bulk I [ PLM (EPA/600/R-93/116) O PLM (EPA Point Count) Q PLM (EPA Gravimetry) ❑ TEM Bulk ❑ Mold/Fungus p Mold Air D Mold Bulk ❑_ _Rotometer Calibration METALS InrGFAAp(ppb) __Matrix - RCRA Metals ther Rfotal Ltoi—allf-e'tals p Air Filler -L_ aint Chips in cm ❑ Arsenic As p Mercu H �m3 ( ) Mercury ( g) ❑❑Drinking water ❑ Waste Water ❑ Barium (Ba) ❑ Selenium (Se) ❑ Copper (Cu) ❑❑ Dust/wipe (Area) ❑ Other ❑ Cadmium(Cd) ❑ Silver (Ag) O Nickel (NI) ❑ Soil ❑ Chromium (Cr) 0 Zinc (Zn) O Paint Chips In %10 Lead (Pb) p Other Types 10121berglass 13 Nulsence Dust ❑ Other (Specify) - - of Analysis p Slllca ❑ Respirable Dust -- Condition of Package: ❑ Good ❑ Damaged (no spillage) ❑ Severe demaos lsoulaeal Seq.# Lab ID Sample Number 1 omments (e.g Sample area, sample Volume, etc) AIR i0ent 2 4 6 J - Ili -3 - - - -1 _ _8 - 8 _G_ 10 _ 6/ 12 13 _'T ,4 y_?_a _ 16 _ _3 - -- Received Results Called by - -- — Results Faxed by —T Special Instructions: Unless requested In writing, all samples jwill be disposed of two (2) weeks after analysis. CM.c.I SG�,�(IK. ,(I w/rCJSI, S t' c� So` 4'.. iu�5 �. �o w. 11F 1 1 f page 17 of 18 5'='�F5' :)' NVL Laboratories, Inc. 4708 Aurora Ave N. Seattle, WA 98103 CHAIN of CUSTODY iN�yi�.., Tel: 206,547.0100 Emerg.Pager:206.344.1878 SAMPLE LOG Fax: 206.634.1936 1.888.NVL LASS (685.5227) Client a,� `�� 1804666 Street �Q�(• . _ � r � NVL Batch Number _ Client Job Number Total Samples Project Manager r I� _ Tum Around Time ❑ 1 •Hr ❑ 24-Hrs ❑� Days Project Location — �n Z_ I 1 I ❑ 2-Hrs ❑ 2 Dnys L5 s Days i7 ,l-Mrs ❑ 3 Days ❑ G WO Days Please call for TAT less than 24 Hrs Phone: Fax: Email address _ - - - LI eatos Air ❑ P (NIOSH 74001 ❑ TEM (NIO811-1 7402) ❑ TEM (AHERA) ❑ TEM (EPA Level II) ❑ Other Asb®sloe Bulk PLM (EPA/600/R.93/116) ❑ PLM EPA Point Count) ❑ PLM (EPA Gravimetry) ❑ TEM Bulk ❑ Mdd/Fungus ❑ Mold Air ❑ Mold Bulk ❑ Rotometer Calibration METALS Inst./DOf LI I � Total Metals ❑ �� ❑FAA (ppm) Matrix U Air Filter Paint Chips in cm RCRA Metals �i or ea s Au _ ❑ Arsenic (As) LJ Mercury Ci Ail 3 - — O ICP (ppm) ❑ GFAA (ppb) ❑Drinking water ❑ Dust/wipe (Area) ❑ Wsale Water ❑ Other (H ❑ Barium� (J�) (Be)Cd C Co Copper (Cu) ❑ Soil ❑Cadmium ❑ Sielverl A (g) ❑ Nickel ) Other O Paint Chips In °k ❑ Chromlum((Cr) ❑ Lead (Pb) -I zinc (Zn) ❑ Types ❑ Fiberglass ❑ Nuisance Dust of Analysis ❑ Silica_ ❑ Respirable Dust ❑ Other (Specify) — - - - Condltlon of Packans• CJ Good 1-1 Daman. inn enlue.._i ri -� Kounquished by A Received by Analyzed by Results Called by - - Results Faxed by - Special Instructions: Unless requested In writing, all samples will be disposed of two (2) weeks after analysis. 14- ' page 18 of 18 March 20, 2018 Micheal Smith AMEC FW - Seattle 600 University St. Ste. 600 Seattle, WA 98101 RE: Bulk Asbestos Fiber Analysis; NVL Batch # 1804772.00 Client Project: PS18200370 Location: Edmonds Medical Pavilion Dear Mr. Smith, IN IL L A B S INDUSTRIAL H Y G I E N E SERVICES Laboratory Management I Training Enclosed please find test results for the 5 sample(s) submitted to our laboratory for analysis on 3/13/2018. Examination of these samples was conducted for the presence of identifiable asbestos fibers using polarized light microscopy (PLM) with dispersion staining in accordance with both EPA 600/M4-82-020, Interim Method for the Determination of Asbestos in Bulk Insulation Samples and EPA 600/R-93/116 Method for the Determination of Asbestos in Bulk Building Materials. For samples containing more than one separable layer of materials, the report will include findings for each layer (labeled Layer 1 and Layer 2, etc. for each individual layer). The asbestos concentration in the sample is determined by calibrated visual estimation. For those samples with asbestos concentrations between 1 and 10 percent based on visual estimation, the EPA recommends a procedure known as point counting (NESHAPS, 40 CFR Part 61). Point counting is a statistically more accurate means of quantification for samples with low concentrations of asbestos. The detection limit for the calibrated visual estimation is <1%, 400 point counts is 0.25% and 1000 point counts is 0.1 % Samples are archived for two weeks following analysis. Samples that are not retrieved by the client are discarded after two weeks. Thank you for using our laboratory services. Please do not hesitate to call if there is anything further we can assist you with. Sincerely, 1 �- . Matt Macfarlane, Asbestos Supervisor 1.888.NVL.LA13S Eric.: Sample Results NVL Laboratories, Inc. Lab Code: 102063-0 4708 Aurora Ave N, Seattle, WA 98103 www.nvllabs.com p 206.547.0100 1 f 206.634.1936 page 1 of 5 NVL Laboratories, Inc. IN IL •1708 Aurora Ave N, Sealtle, WA 9R103 p 206547.0100 1 1206.634.1936 1 www.nvllabs•com L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW - Seattle Address: 600 University St. Ste. 600 Seattle, WA 98101 Attention: Mr. Micheal Smith Project Location: Edmonds Medical Pavilion Batch #: 1804772.00 Client Project* PS18200370 Date Received: 3/13/2018 Samples Received: 5 Samples Analyzed: 5 Method: EPA/600/R-93/116 8 EPA/600/M4-82-020 Lab ID: 18025602 Client Sample #: 5-Shelf-1 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Brown flat hard compressed fibrous material with surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles Cellulose 32% None Detected ND Lab ID: 18025603 Client Sample #: 5-Compound-1 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Gray brittle material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine grains Cellulose 2% None Detected ND Lab ID: 18025604 Client Sample #: 5-Insulation-1 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Yellow fibrous material Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Glass debris Glass fibers 99% None Detected ND Lab ID: 18025605 Client Sample #: 5-Panel-1 Location: Edmonds Medical Pavilion Layer 1 of 1 Description: Brown compressed fibrous material with patterned surface Non -Fibrous Materials: Other Fibrous Materials:% Asbestos Type: % Binder/Filler, Fine particles Cellulose 89% None Detected ND Lab ID: 18025606 Client Sample #: 5-WBS-1 Location: Edmonds Medical Pavilion Layer 1 of 3 Description: White compacted powdery material Non -Fibrous Materials: Other Fibrous Materials:% Calcareous binder, Calcareous particles Cellulose 2% Asbestos Type: % None Detected ND Sampled by: Client j �J - Analyzed by: Galen Richards Date:03/20/2018 Y Reviewed by: Matt Macfarlane Date:03/20/2018 Matt Macfarlane, Asbestos Supervisor Note If samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-93/116 and 6001M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1 %=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 2 of 5 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N. Seattle. WA 98103 p 206.517.0100 1 1206.634,1936 1 www.nvllabs.co,, L A B S Bulk Asbestos Fibers Analvsis By Polarized Light Microscopy Client: AMEC FW - Seattle Address: 600 University St. Ste. 600 Seattle, WA 98101 Attention: Mr. Micheal Smith Project Location: Edmonds Medical Pavilion Layer 2 of 3 Description: White chalky material with paper Non -Fibrous Materials: Other Fibrous Materials:% Gypsum/Binder, Miscellaneous particles Cellulose 23% Layer 3 of 3 Description: White brittle material Non -Fibrous Materials: Other Fibrous Materials:% Calcareous binder, Calcareous particles None Detected ND Batch M 1804772.00 Client Project #: PS18200370 Date Received: 3/13/2018 Samples Received: 5 Samples Analyzed: 5 Method: EPA/600/R-93/116 & EPA/600/M4-82-020 Asbestos Type: % None Detected ND Asbestos Type: % None Detected ND Sampled by: Client Analyzed by: Galen Richards Date: 03/20/2018 Reviewed by: Matt Macfarlane Date: 03/20/2018 Matt Macfarlane, Asbestos Supervisor Note: It samples are not homogeneous, then subsamples of the components were analyzed separately. All bulk samples are analyzed using both EPA 600/R-931116 and 600/M4-82-020 Methods with the following measurement uncertainties for the reported % Asbestos (1%=0-3%, 5%=1-9%, 10%=5-15%, 20%=10-30%, 50%=40-60%). This report relates only to the items tested. If sample was not collected by NVL personnel, then the accuracy of the results is limited by the methodology and acuity of the sample collector. This report shall not be reproduced except in full, without written approval of NVL Laboratories, Inc. It shall not be used to claim product endorsement by NVLAP or any other agency of the US Government page 3 of 5 NVL Laboratories, Inc. ASBESTOS LABORATORY SERVICES IN IL 4708 Aurora Ave K Seattle, WA 98103 p 206.547.0100 1 f 206.634.1936 1 wwwmAlabs.com L A B S Company AMEC FW -Seattle NVL Batch Number 1804772.00 Address 600 University St. Ste. 600 TAT 5 Days AH No Seattle, WA 98101 Rush TAT Project Manager Mr. Micheal Smith Due Date 3/20/2018 Time 11:15 AM Phone (206) 342-1760 Email mike.s.smith@amec.com Fax Project Name/Number: PS18200370 Project Location: Edmonds Medical Pavilion Subcategory PLM Bulk Item Code ASB-02 EPA 600/R-93-116 Asbestos by PLM <bulk> Total Number of Samples 5 Rush Samples Lab ID Samole ID Description A/P 1 18025602 5-Shelf-1 q 2 18025603 5-Compound-1 q 3 18025604 5-Insulation-1 i q 4 18025605 5-Panel-1 q 5 118025606 5-WBS-1 q Print Name Signature Company Date Time Sampled by Client Relinquished by Client Office Use Only Print Name Signature Company Date Time Received by Nicholas Dossegger NVL 3/13/18 1115 Analyzed by Galen Richards NVL 3/20/18 Results Called by ❑ Faxed I-1 Emailed Special Instructions: Date: 3/1312018 Time' 4 25 PM Entered By Fatima Khan page 4 of 5 Turn Around Time ASBESTOS Nurs NVL 190D1rNr11 N1011N111ArIC11 CHAIN OF CUS7 1804172 ��� � ��� _I hl II.,y. IAIOtAIDtf • NAAAI[Yr AI • IAAINIAD j� n 24 Hours Company AAknr_',C_ (_ U% Project Manager Address _ /'Lf��/ �' fcL• Gl�G Cell 't-•�•i (� I WA {( Email Phone Fax d ,,, c Project Name/Number P�,�;,p�j'�']Q Project Location I'o*V1 E vho Ca r 1 11d t^ JV-M Air (NIOSH 7400) ❑ TEM (NIOSH 7402) J TEM (AHERA) C] TEM (EPA Level II Modified) PLM (EPA 600/R-93-116) ❑ EPA 400 Points (600/R-93-116) U EPA 1000Points (600/R-93-116) ❑ PLM Gravimetry (600/R-93-116) ❑ Asbestos in Vermiculite (EPA 600/R-04/004) ❑ Asbestos in Sediment (EPA 1900 Points) U Asbestos Friable/Non-Friable (EPA 600/R-93/116) U Other QFax IJErnall Total Number of Samples Sample ID Description 1 S— W—;.. - 2 Un., 4 5 J Jt, 6 7 8 9 10 11 12 13 l�. 15 APrint Name Signature Company Date Time Sampled by /► „� �, �, „�� i�i r� AS—,�F(,i/ 3 ff I al� I Sc / Relin uish b �y Office Use Only I' IVun1'• Signature Lcnn1�Inv Date Inn•. Received by , �1`I •'"'' —_ - - - V -- fIy ll.la Analyzed by _ 4_ Called by Faxed/Email by _ 4708 Aurora Ave N, Seattle, WA 98103 p 206.S47.0100 1 f 206.634.1936 www.nvitabs.com page 5 of 5 March 16, 2018 Micheal Smith AMEC FW - Seattle 600 University St. Ste. 600 Seattle, WA 98101 RE: Metals Analysis; NVL Batch # 1804767.00 Dear Mr. Smith, IN IL L A B S INDUSTRIAL H Y G I E N E SERVICES Laboratory I Management I Training Enclosed please find the test results for samples submitted to our laboratory for analysis. Preparation of these samples was conducted following protocol outlined in EPA Method SW 846 -3051 unless stated otherwise. Analysis of these samples was performed using analytical instruments in accordance with U.S. EPA, NIOSH, OSHA and other ASTM methods. For matrix materials submitted as paint, dust wipe, soil or TCLP samples, analysis for the presence of total metals is conducted using published U.S. EPA Methods. Paint and soil results are usually expressed in mg/Kg which is equivalent to parts per million (ppm). Lead (Pb) in paint is usually expressed in mg/Kg (ppm) , Percent (%) or mg/cm` by area. Dust wipe sample results are usually expressed in ug/wipe and ug/ftz. TCLP samples are reported in mg/L (ppm). For air filter samples, analyses are conducted using NIOSH and OSHA Methods. Results are expressed in ug/filter and ug/m3. Other matrix materials are analyzed accordingly using published methods or specified by client. The reported test results pertain only to items tested and are not blank corrected. For recent regulation updates pertaining to current regulatory levels or permissible exposure levels, please call your local regulatory agencies for more details. This report is considered highly confidential and will not be released without your approval. Samples are archived for two weeks following analysis. Samples that are not retrieved by the client are discarded after two weeks. Thank you for using our laboratory services. if you need further assistance please feel free to call us at 206-547-0100 or 1-888-NVLLABS. Sincerely, Shalini Patel, Laboratory Analyst AIHA LAP, LLC ACCREDITED lABOfIRATATORY 1.888.NVL.LABS www.nvllabs.com LA8 P 101661 NVL Laboratories, Inc. 4708 Aurora Ave N, Seattle, WA 98103 p 206.547,0100 1 f 206,634.1936 page 1 of 4 NVL Laboratories, Inc. �. r�L I N 4708 Aurora Ave N, Seattle. WA 98103 206.547.0100 1206,634.193E p I I www.nvllabs.catn L A B S Analysis Report Total Lead (Pb) Client: AMEC FW- Kirkland Batch #: 1804575.00 Address: 4020 Lake Washington Blvd. NE, Ste. 200 Matrix: Paint Kirkland, WA 98033 Method: EPA 3051/7000B Client Project* Edmonds Attention: Mr. Mike Smith Date Received: 3/9/2018 Project Location: Edmond Medical Center Samples Received: 4 Samples Analyzed: 4 Sample RL in Results Results in Lab ID Client Sample # Weight (g) mg/Kg in mg/Kg percent 18024387 PB-01 0.1955 51 91 0.0091 18024388 PB-02 0.1905 52 < 52 <0.0052 18024389 PB-03 0.1925 52 < 52 <0.0052 18024390 PB-04 0.1878 53 <53 <0.0053 Sampled by: Client Analyzed by: Yasuyuki Hida Date Analyzed: 03/15/2018 Reviewed by: Shalini Patel Date Issued: 03/15/2018 Shalini Patel, Laboratory Analyst mg/ Kg =Milligrams per kilogram RL = Reporting Limit Percent = Milligrams per kilogram / 10000 '<' = Below the reporting Limit Note : Method QC results are acceptable unless stated otherwise. Unless otherwise indicated, the condition of all samples was acceptable at time of receipt. Bench Run No: 2018-0315-3 page 2 of 4 NVL Laboratories, Inc. LEAD LABORATORY SERVICES 4708 Aurora Ave N, Seattle. WA 98103 p 206.547,0100 1 1206.634.1936 1 www,nvllabs.com Company AMEC FW- Kirkland Address 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 Project Manager Mr. Mike Smith Phone (425) 368-1000 Cell (425) 443-4306 NVL Batch Number 1804575.00 TAT 5 Days AH No Rush TAT Due Date 3/16/2018 Time 1:00 PM Email mike.s.smith@amecFW.com Fax (425) 368-1001 IN IL L A B S Project Name/Number: Edmonds Project Location: Edmond Medical Center Subcategory Flame AA (FAA) Item Code FAA-02 EPA 7000B Lead by FAA <paint> Total Number of Samples 4 Rush Samples Lab ID Samule ID Description A/P 1 18024387 PB-01 _ A 2 18024388 PB-02 A 3 18024389 PB-03 A 4 18024390 PB-04 A Print Name Signature Company Date Time Sampled by Client Relinquished by Client Office Use Only Print Name Signature Company Date Time Received by Fatima Khan NVL 3/9/18 1300 Analyzed by Yas_uyuki H_id_a NVL 3/15/18 Results Called by ❑ Faxed ❑ Emailed Special Instructions: Dale:WQ018 Time:2:41 Prdl Entered By Nicholas Dosseno• page 3 of 4 NVL Lahoratod p- Ing. CHAIN of CUSTODY I�. slti 4708Aurora Ave N,Seattto,WA98103 Tel. 206.547.01o0 Einerg.Cell:20.6.Qi4.4646 SAMPLE LOG Fex:206.634.1936 IM&NVLLABS (685.6227) gp 57 Client street �\C>` Ltd NVL Batch Number Client �-� ` �'� Job Number V\ ram_ Total Samples ` Project Manager j 9 ❑ 1-Hr f] ti-Hrs ❑ 2 f),: ) 5 Days Turn Around Time y�� Project Location _ —� <<� �(y Y r vt �� C� �� r�' ` 1:32-firs ❑ 12 #fa ❑ 3 Days 6.10 Da �Z 1 ❑ 4-Hra ❑ 24-Hr,; ❑ 4 Days ��p Please cpII for TAT I -3-s than 2�} Hrs Email address -k h 1 - V i }��-1 0 -\L �10 // 3 - ��rc� _ •Phone: I Fax- %t O-ec rvq , (of J — METALS ❑ Total Metals Dot- Limit Matrix I FAA (i�hm. ❑ Air Filter ' RCRA Metals ❑ Soil ❑ Arsenic (As) El AA 8 Q All 3otais ❑ Chromium (Cr ❑ TCLP ❑ ■ iCP (ppm) ❑ Drinking water gPaint Chips in % ❑ Barium (Ba) �i Load (Pb) ❑ Copper (Cu) ❑ Nickel Cr 6 [ GFAA (p) ❑ Dust/wipe (Area) Paint Chips in cn ❑ Cadmium (Cd) f_ Mercury (Hg) (No — = -- ❑Other Types _ --_❑ III Fiberglass ❑ 811tca ❑ Nuisance Dust ❑ Respirable Dust ❑ Other (Spec tfy) Zinc 2n) Condition of Package: ❑ Good ❑ Damaged (no spillage) ❑ Severe damage (spillage) . ry Lab ID Client Sample Number Conintionts a. Sample are, Sample Volume, etc) A/R 2 3 4 P t5— -� 8 8 10 13 14 1S Special Instructions: Unless requested in writing, all samples will be disposed of two (2) weeks after analysis. page 4 of 4 March 15, 2018 Mike Smith AMEC FW- Kirkland 4020 Lake Washington Blvd. NE, Ste. 200 Kirkland, WA 98033 RE: Metals Analysis; NVL Batch # 1804575.00 Dear Mr. Smith, IN IL L A B S INDUSTRIAL H Y G I E N E SERVICES Laboratory i Management I Training Enclosed please find the test results for samples submitted to our laboratory for analysis. Preparation of these samples was conducted following protocol outlined in EPA Method SW 846 -3051 unless stated otherwise. Analysis of these samples was performed using analytical instruments in accordance with U.S. EPA, NIOSH, OSHA and other ASTM methods. For matrix materials submitted as paint, dust wipe, soil or TCLP samples, analysis for the presence of total metals is conducted using published U.S. EPA Methods. Paint and soil results are usually expressed in mg/Kg which is equivalent to parts per million (ppm). Lead (Pb) in paint is usually expressed in mg/Kg (ppm) , Percent (%) or mg/cm' by area. Dust wipe sample results are usually expressed in ug/wipe and ug/ft`. TCLP samples are reported in mg/L (ppm). For air filter samples, analyses are conducted using NIOSH and OSHA Methods. Results are expressed in ug/flter and ug/m'. Other matrix materials are analyzed accordingly using published methods or specified by client. The reported test results pertain only to items tested and are not blank corrected. For recent regulation updates pertaining to current regulatory levels or permissible exposure levels, please call your local regulatory agencies for more details. This report is considered highly confidential and will not be released without your approval. Samples are archived for two weeks following analysis. Samples that are not retrieved by the client are discarded after two weeks. Thank you for using our laboratory services. if you need further assistance please feel free to call us at 206-547-0100 or 1-888-NVLLABS. Sincerely, Shalini Patel, Laboratory Analyst AIHA LAP, LLC ACCREDITED LABORATORY 1.888.NVL.LABS v>n pia" =`ESEAsriu�s www rivllabs,com LAB;101861 page 1 of 4 NVL Laboratories, Inc. 4708 Aurora Ave N, Seattle, WA 98103 p 206,547.0100 i f 206.634.1936 NVL Laboratories, Inc. IN IL 4708 Aurora Ave N, Seattle. WA 98103 p 206.547,0100 I 1206,G34.1936 I www.nvllaus.cam L A G S Analysis Report Total Lead (Pb) Client: AMEC FW -Seattle Batch #: 1804767.00 Address: 600 University St. Ste. 600 Matrix: Paint Seattle, WA 98101 Method: EPA 305117000B Client Project #: PS18200370 Attention: Mr. Micheal Smith Date Received: 3/13/2018 Project Location: Edmonds Medical Plaza Samples Received: 9 Samples Analyzed. 9 Sample RL in Results Results in Lab ID Client Sample # Weight (g) mg1Kg in mg/Kg percent 18025547 202-orange-Pb-1 0.1964 51 < 51 <0.0051 18025548 202-whiteglass-Pb-2 0.0590 170 2500 0.25 18025549 202-gray-Pb-3 0.1890 53 < 53 <0.0053 18025550 202-yellow-Pb-4 0.1352 74 <74 <0.0074 18025551 202-whitewindowsill-Pb-5 0,1957 51 <51 <0.0051 18025552 202-whiteDF-Pb-6 0.1900 53 < 53 <0.0053 18025553 202-Eggshell-Pb-7 0.1809 55 < 55 <0.0055 18025554 202-khaki-Pb-8 0.1511 66 < 66 < 0.0066 18025555 202-closet-Pb-9 0.2073 48 <48 <0.0048 Sampled by: Client Analyzed by: Yasuyuki Hida Date Analyzed: 03/16/2018 Reviewed by: Shalini Patel Date Issued: 03/16/2018 Shalini Patel, Laboratory Analyst mg/ Kg =Milligrams per kilogram RL = Reporting Limit Percent = Milligrams per kilogram / 10D00 '<' = Below the reporting Limit Note : Method QC results are acceptable unless stated otherwise. Unless otherwise indicated, the condition of all samples was acceptable at time of receipt. Bench Run No: 2018-0316-8 page 2 of 4 NVL Laboratories, Inc. LEAD LABORATORY SERVICES 4708 Aurora Ave N, Seattle, WA 98103 p 206.547.0100 1 1206.634.1936 1 ww%v.nvllabs.com Company AMEC FW - Seattle Address 600 University St. Ste. 600 Seattle, WA 98101 Project Manager Mr. Micheal Smith Phone (206) 342-1760 (425) 443-4306 Project Name/Number: PS18200370 Subcategory Flame AA (FAA) NVL Batch Number 1804767.00 TAT 5 Days AH No Rush TAT Due Date 3/20/2018 Time 11:15 AM Email mike.s.smith@amec.com Fax (425) 368-1001 Project Location: Edmonds Medical Plaza Item Code FAA-02 EPA 7000E Lead by FAA <paint> Total Number of Samples 9 Lab ID Sample ID Descri 1 18025647 202-orange-Pb-1 2 18025548 202-white lass-Pb-2 3 18025549 202 ra -Pb-3 4 18025550 202- ellow-Pb-4 5 18025551 202-whitewlndowsill-Pb- 6 18025552 202-whiteDF-Pb-6 7 18025553 1 202-E shell-Pb-7 8 18025554 202-khaki-Pb-8 9 18025555 202-closet-Pb-9 Rush Samples IN WIL L A B S Print Name Signature Company Date Time Sampled by Client Relinquished by Client Office Use Only Print Name Signature Company Date Time AIR Received by Nicholas Dossegger NVL 3/13/18 1115 Analyzed by Yasuyukl Hida NVL 3/16/18 Results Called by ❑ Faxed n Emailed Special Instructions: Dale: 3/13/2018 Time. 4 03 PM Entered By Nicholas Dossegger page 3 of 4 1804767 PAVL METALS Turn Around Toone J 2 Hour J 4 Hours U 24 Hours ),2 Days U 3 Days J 4 Days INDINDUSTRIALNYOIINI 51111VICll CHAIN OF CUSTODY , Days U 6-10 Days UlOPA1011 • YANAbiUINI IIAIIINL Please fall (or TAT less than 24 flours Company Htn.. e.c 1r w Project Manager _ _ _ (<G '�7w• i i'� t� 1 / ��A Vtdl, Address .(��J l/lv�, _/��"'a►r f ��t��f'a. C Cell ) Email Phone _ _ Fax { Pry r ect Name/Numb e (`d 0 03-70 Project LocationJEJys,sp v,,� AW , (O-].0. Lm. \ (" Ird.d Moak ' '1% (ppm J r Filter U Polnt Char. (%) U Sod RCRA 8 RCRA 11 U rCLP U ICP (PPM Punt Chips (con) U bust Wgx•s U Barium U Chromium -I % el J Copper J GFAA (ppb) U Onnkiny Water J Waste Water U Arsenic U Mercury Y(I . I J 7inr 7 CVAA (ppb) U tither U Selenium U Cadmium -1 Othrr Reporting Instructions C u,�C e�(�c I 1_�; O Calf �a.U_Cr-I x"� -_ �7�h+<1. 11 Fax (-- ) U Email 3USUI'% A: . . (?q Total Number of Samples I Sample ID 1 Soa--oro.snr)e--Pk, - 2— �i sa�laL�.o�(ass-P►�. 3�� 6- t 10 11 12 — — 13 14 1S Print Name Sampled by Relinquish by Office use only Description Signature A/R A---- - Company Date Thno - ---AFC-- -IJ:u11t• Signature ( Company Date lin,1 Received by Analyzed by _ Called by Faxed/Email by 4708 Aurora Ave N, Seattle, WA 98103 1 p 206.547.0100 1 f 206.634.1936 I www.nvilabs.com page 4 of 4 amec foster wheeler ATTACHMENT 3 Laboratory Certification AIHA =� atory Accreditation Programs, LLC AIHA Laboratory Accreditation Programs, LLC acknowledges that NVL Laboratories, Inc. 4708 Aurora Avenue N., Seattle, WA 98103 Laboratory ID: 101861 along with all premises from which key activities are performed, as listed above, has fulfilled the requirements of the AIHA Laboratory Accreditation Programs (AIHA-LAP), LLC accreditation to the ISO/IEC 17025:2005 international standard, General Requirements for the Competence of Testing and Calibration Laboratories in the following: LABORATORY ACCREDITATION PROGRAMS ✓ INDUSTRIAL HYGIENE Accreditation Expires: June 01, 2019 ✓ ENVIRONMENTAL LEAD Accreditation Expires: June 01, 2019 ✓ ENVIRONMENTAL MICROBIOLOGY Accreditation Expires: June 01, 2019 ❑ FOOD Accreditation Expires: ✓ UNIQUE SCOPES Accreditation Expires: June 01, 2019 Specific Field(s) of Testing (FoT)/Method(s) within each Accreditation Program for which the above named laboratory maintains accreditation is outlined on the attached Scope of Accreditation. Continued accreditation is contingent upon successful on -going compliance with ISO/IEC 17025:2005 and AIHA-LAP, LLC requirements. This certificate is not valid without the attached Scope of Accreditation. Please review the AIHA- LAP, LLC website (www.aihaaccreditedlabs.ore) for the most current Scope. William Walsh, CIH Chairperson, Analytical Accreditation Board U, Cheryl O. Morton Managing Director, AIHA Laboratory Accreditation Programs, LLC Revision 15: 03/30/2016 Date Issued: 05/31/2017 s ie AI HA Laboratory Accreditation 1W Programs, LLC AIHA Laboratory Accreditation Programs, LLC SCOPE OF ACCREDITATION NVL Laboratories, Inc. 4708 Aurora Avenue N., Seattle, WA 98103 Laboratory ID: 101861 Issue Date: 05/31/2017 The laboratory is approved for those specific field(s) of testing/methods listed in the table below. Clients are urged to verify the laboratory's current accreditation status for the particular field(s) of testing/Methods, since these can change due to proficiency status, suspension and/or withdrawal of accreditation. Industrial Hygiene Laboratory Accreditation Program (IHLAP) Initial Accreditation Date: 04/01/1997 Field of Testing (FoT) Technology Published Reference Method Description IHLAP Scope (Fors cover all relevant sub -type/ Method/Title of In - or Analyte Category IH matrices) Detector house Method (for internal methods only) Inductively -Coupled ICP/AES EPA 3051 NIOSH 7300 Modified Spectrometry Core Plasma X-ray Diffraction (XRD) NIOSH 7500 Asbestos/Fiber Phase Contrast NIOSH 7400 Microsco y Core Microscopy (PCM) NIOSH 0500 Modified Miscellaneous Core Gravimetric NIOSH 0600 Modified A complete listing of currently accredited Industrial Hygiene laboratories is available on the AIHA-LAP, LLC website at: hlW://www.aihaaccreditedlabs.org Effective: 04/ 10/2015 101861_Scope_IHLAP_2017_05_31 Page 1 of 1 AI HA Laboratory Accreditation Programs, LLC AIHA Laboratory Accreditation Programs, LLC SCOPE OF ACCREDITATION NVL Laboratories, Inc. 4708 Aurora Avenue N., Seattle, WA 98103 Laboratory ID: 101861 Issue Date: 05/31/2017 The laboratory is approved for those specific field(s) of testing/methods listed in the table below. Clients are urged to verify the laboratory's current accreditation status for the particular field(s) of testing/Methods, since these can change due to proficiency status, suspension and/or withdrawal of accreditation. The EPA recognizes the AIHA-LAP, LLC ELLAP program as meeting the requirements of the National Lead Laboratory Accreditation Program (NLLAP) established under Title X of the Residential Lead -Based Paint Hazard Reduction Act of 1992 and includes paint, soil and dust wipe analysis. Air and composited wipes analyses are not included as part of the NLLAP. Environmental Lead Laboratory Accreditation Program (ELLAP) Initial Accreditation Date: 02/07/1997 Field of Testing (FoT) Technology sub -type/ Detector Method Method Description (for internal methods only) Paint EPA SW-846 3051 EPA SW-846 7000B Soil EPA SW-846 3051 EPA SW-846 7000B Settled Dust by Wipe EPA SW-846 3051 EPA SW-846 7000B Airborne Dust EPA SW-846 3051 NIOSH 7082 A complete listing of currently accredited Environmental Lead laboratories is available on the AIHA-LAP, LLC website at: http://www.aihaaccreditedlabs.org Effective: 10/14/2016 Scope_ELLAP_R7 Page 1 of 1 AI HA Laboratory Accreditation Programs, LLC AIHA Laboratory Accreditation Programs, LLC SCOPE OF ACCREDITATION NVL Laboratories, Inc. 4708 Aurora Avenue N., Seattle, WA 98103 Laboratory ID: 101861 Issue Date: 05/31/2017 The laboratory is approved for those specific field(s) of testing/methods listed in the table below. Clients are urged to verify the laboratory's current accreditation status for the particular field(s) of testing/Methods, since these can change due to proficiency status, suspension and/or withdrawal of accreditation. Environmental Microbiology Laboratory Accreditation Program (EMLAP) Initial Accreditation Date: 02/01/1997 EMLAP Category Field Testing Method Method Description (of (for internal methods only) Air - Direct Examination SOP 12.133 In -House: Analysis of Spore Trap Fungal Bulk - Direct Examination SOP 12.133 In -House: Bulk Analysis Surface - Direct Examination SOP 12.133 In -House: Surface Analysis A complete listing of currently accredited Environmental Microbiology laboratories is available on the AIHA-LAP, LLC website at: htW://www.aihaaccreditedlabs.ore Effective: 03/12/2013 101861_Scope_EMLAP_2017_05_31 Page 1 of 1 AI HA Laboratory Accreditation Programs, LLC AIHA Laboratory Accreditation Programs, LLC SCOPE OF ACCREDITATION NVL Laboratories, Inc. 4708 Aurora Avenue N., Seattle, WA 98103 Laboratory ID: 101861 Issue Date: 05/31/2017 The laboratory is approved for those specific field(s) of testing/methods listed in the table below. Clients are urged to verify the laboratory's current accreditation status for the particular field(s) of testing/Methods, since these can change due to proficiency status, suspension and/or withdrawal of accreditation. Unique Scopes Laboratory Accreditation Program (Unique Scopes) Initial Accreditation Date: 04/01/2013 Unique Scope Category Field of Testing (FoT) Method Method Description (for internal methods only) Lead in Paint and Other CPSC-CH-E1003-09.1 Similar Surface Coatings Total Lead in Metal CPSC-CH-E1001-08.2 Consumer Product Testing Children's Products Total Lead in Non -Metal CPSC-CH-E1002-08.1 Children's Products A complete listing of currently accredited Unique Scope laboratories is available on the AIHA-LAP, LLC website at: http://www.aihaaccreditedlabs.org Effective: 08/29/2014 Scope _UniqueScopes_R 1 Page 1 of 1 United States Department of Commerce National Institute of Standards and Technology NV�A� Certificate of Accreditation to ISO/IEC 17025:2005 NVLAP LAB CODE: 102063-0 NVL Laboratories, Inc. Seattle, WA is accredited by the National Voluntary Laboratory Accreditation Program for specific services, listed on the Scope of Accreditation, for Asbestos Fiber Analysis This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communique dated January 2009). 2017-10-01 through 2018-09-30 Effective Dates QpQ��EHT OF y� For the National VoluntaW 1,�bora&o Accreditation Program O P� �arEs � .wr OF National Voluntary MW La- Laboratory Accreditation Program - \ SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NVL Laboratories, Inc. 4708 Aurora Avenue N. Seattle, WA 98103 Mr. Nghiep Vi Ly Phone:206-547-0100 Fax:206-634-1936 Email: nick.l@nvllabs.com http://www.nvllabs.com ASBESTOS FIBER ANALYSIS NVLAP LAB CODE 102063-0 Bulk Asbestos Analysis Code Description 18/A01 EPA -- Appendix E to Subpart E of Part 763 -- Interim Method of the Determination of Asbestos in Bulk Insulation Samples 18/A03 EPA 600/R-93/116: Method for the Determination of Asbestos in Bulk Building Materials For the National Volunta&yborat6q Accreditation Program ti Effective 2017-10-01 through 2018-09-30 Page 1 of 1 amec foster wheeler ATTACHMENT 4 Inspector Certification certificate of Completion This is to certify that Anthony M. Bird has satisfactorily completed 24 hours of training as an AHERA Building Inspector to comply with the training requirements of TSCA Title II, 40 CFR 763 (AHERA) 163400 Certificate Number y Nov 6 - 8, 2017 Expires in 1 year. n_ Date(s) of Training 1 I or / - T Jy(l�f flu-�Ij Exam Score: "'AINING•CONSUITING (� Alfa Cow If appropriate: Instructor ARGUS PACIFIC. INC 11900WEST NICKERSON ST.SUITE 315 1 SEATTLE.WASHINGTON 981191 206.285.3373 /ARGUSPACIFIC.COM Scanned by CamScanner THE ASBESTOS INSTITUTE Certifies that Susan Kimball has attended and received instruction in the EPA approved course AHERA Building Inspector Refresher on January 31, 2018 and successfully completed and passed the competency exam. C[:�[.^�ifi�1~aiZEc�ifiE:3 Date of Examination: - 31-Jan-2018 Date of Expiration: William re a 31-Jan-2019 Approved Instructor Director THE ASBESTOS INSTITUTE 20033 N. 19th Ave, Building 6, Phoenix, AZ 85027 602-864-6564 — www.theasbestosinstitute.com This training meets all requirements for asbestos certification under Toxic Substance Control Act Title ll. amec foster wheeler ATTACHMENT 5 Sample Location Drawings � CM-01-1 L � GWB-01-2 GWB-01-1 0 ` - -- --! CM-01-1 Z♦ GWB-03-4 GWB-02-2 L f GWB-02-5 GWB-03-1 GWB-02-1 \ � i' r �'� •� H 14 A 1 (-- %'' J t En •� J / RI 9• f / �r 1 j 1) � j 'ii �1 •r it 1 1 � r ® WAITING RECEPTION ly.p• '1,^�-"�" Ir• STOMA `� + �:- p-y � • r-tl• { 1 -Gi-6 I'S ,_Z-1 y.•e• sral 11 -T-� 7 /.wm I 11-w'Z II-F�-w �• s-5 ti..iF'•1 q • OPHO Gr- aD Scanned by CamScanner