Loading...
FIR2024-0086+Fire_Alarm_Equipment_Specification_Sheets+9.20.2024_1.36.52_PM+4514529FIR2024-0086 RECEIVED Sep 20 2024 STERLINC.r COMMUNICATION TECHNOLOCIIES, INC.. Sterling Communication Technologies, Inc. Submittal TCN Edmonds Systems: Div. 28 FIRE ALARM SYSTEM August 5t", 2024 Submitted by: Joe Stevenson Sterling Communication Technologies, Inc. 18540 Apache Drive, Unit 100 Parker CO 80134 www.stercommtech.com Honeywell I Addressable Devices QGamewell �^ Velociti° Series 3 Detectors Photoelectric Detectors Description The Gamewell-FCI, Velociti° Series 3 intelligent photoelectric detectors with integral communication provide point location for alarm communication and selective maintenance. Designed in a modern bright white color, the Velociti Series 3 is aesthetically pleasing for today's contemporary buildings. The Velociti Series 3 smoke detectors are intelligent addressable detectors with point ID capability that enable each detector address to be set with rotary address switches providing exact device locations. The photoelectric detector continually monitors the detected temperature and reports it to the fire alarm control panel. The modern design and expanded color options support a variety of contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency. The Gamewell-FCI, ASD-PL3 photoelectric detector's re -designed optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The sensitivity of Velociti series detectors can be programmed using the control panel software to suit the environment. The ASD-PL3R photoelectric detector is also remote test capable that may be used with a DNR (DN RW) duct smoke detector housing. The ASD-PTL3 multi - sensor detector offers either photoelectric detection or thermal detection through dual electronic thermistors at 135°F fixed temperature thermal sensing. For legacy installations, service detectors are available in the classic ivory color that will operate in both Velociti and CLIP protocol for backwards compatibility. Service models are designated by the -IV part number after the detector model. Note: Although the E3 Series° and S3 Series panels support both the Velociti° and CLIP" protocols, the GWF-7075 panel does not support the CLIP protocol. To obtain a complete list of panels that are listed to Velociti Series 3 detectors, refer to the Compatibility Addendum for Gamewell-FCI Manuals, P/N:9000-0427-L8. FEATURES & BENEFITS • Complies with UL° • Contains a built-in Standard 268 7th functional test switch Edition activated by external • Designed with a new magnet profile to offer modern • Supports a lowstandby and improved current aesthetics Photoelectric Detector • Provides rotary address • Includes dual LEDs for Offers expanded color switches (01-159) 360'visibility options • Supplies optional relay, isolator, or sounder bases (standard or low frequency) Ordering Information NOTE: "-IV" suffix indicates Ivory color model. NOTE: "-BL' suffix indicates Black color model. NOTE: "WH" suffix indicates Bright White color model. ASD-PL3: Photoelectric smoke detector, bright white, Velociti ASD-PL3R: Photoelectric smoke detector, remote test capable, for use with DN R(W) duct smoke detectors, bright white, Velociti ASD-PTL3: Photoelectric smoke detector with thermal sensing, bright white, Velociti ASD-PL3-IV : Photoelectric smoke detector, ivory, Velociti/ CLIP ASD-PL3R-IV: Photoelectric smoke detector, remote test capable, for use with DNR(W) duct smoke detectors, ivory, Velociti/CLIP ASD-PTL3-IV: Photoelectric smoke detector with thermal sensing, ivory, Velociti/CLIP Intelligent Bases For details on intelligent bases, refer to Data Sheet P/N: 9021-60540. Note: "IV" suffix indicates Flashscan and CLIP devices. "WH" suffix indicates brightwhite B501-WHITE: 4" Flangeless mounting base, brightwhite B501-WHITE-BP: 4" Flangeless mounting base bulk pack, brightwhite B501-IV: 4" Flangeless mounting base, ivory B300-6: 6" Flanged mounting base, bright white B300-6-IV: 6" Flanged mounting base, ivory B300-6-BP: 6" Flanged mounting base bulk (Pack of 10) B200SR-WH: Standard sounder base, bright white B200SR-IV: Standard sounder base, ivory B20OS-WH: Intelligent addressable sounder base, bright white B20OS-IV: Intelligent addressable sounder base, ivory B200SR-LF-WH: Standard low frequency sounder base, brightwhite B200SR-LF-IV: Standard low frequency sounder base, ivory B200S-LF-WH: Intelligent addressable low frequency sounder base, bright white B200S-LF-IV: Intelligent addressable low frequency sounder base, ivory B224RB-WH: Relay base, bright white B224RB-IV: Relay base, ivory B224BI-WH: Isolator base, bright white B224BI-IV: Isolator base, ivory DNR: Intelligent duct detector housing, non -relay DNRW: Intelligent duct detector housing, non -relay, watertight Ordering Information Accessories SMB600:Surface Mounting Kit (flanged) TR300: Accessory Flange Ring for B300 6° Base, bright white TR300-IV: Accessory Flange Ring for B300 6" Base, ivory RA10OZ: Remote LED annunciator, 3-32 VDC The annunciator mounts to a U.S. single -gang electrical box. For use with B501 and B300-6. CK300: Bright White detector kit (Pack of 10) CK300-IR: White, detector color kit for use with MCS-COF Series Detectors. (Pack of 10) CK300-IV: Ivory, detector color kit. (Pack of 10) CK300-IR-IV: Ivory, detector color kit for use with MCSCOF Series detectors. (Pack of 10) CK300-BL: Black detector kit. (Pack of 10) CK300-IR-BI: Black, detector color kit for use with MCSCOF Series detectors. (Pack of 10) M02-04-01: Detector test magnet. M02-09-00: Test magnet with telescoping handle. XR213: Detector removal tool. Allows the installation and/ or removal of the detector heads from the bases in high ceiling applications. XP-4: Extension pole for XR213. Shipped with three, 5-foot (1.524,m) sections. 4 Velociti° Series 3 Detectors Technical Specifications SYSTEMS STANDARDS Photoelectric Intelligent Detector: The Velociti° Series 3 Photoelectric Detectors are Physical Specifications designed to comply with the following standard: Height: 2.0 inches (51 mm) installed in B300-6 base UL Standard: UL 268 Diameter: 6.1 inches (15.49 cm) installed in B300-6 base 4 inches (10.16 cm) installed in B501 base Shipping Weight: 3.4 oz (96.4 g) Operating Temperature Range: Photo: 321 F to 1221 F (01 C to 501 C) Photo in Duct Applications: -41 F to 1580 F (-20° C to 701 C) Photo with Thermal: 321 F to 1001 F (01 C to 381 C) Operating Humidity Range: 10% to 93% non -condensing Rate -of -Rise Detection: Responds to greater than 150F/minute or 135°F (8.3° C/minute or 57°C Air Velocity Range: 0 to 4,000 ft/min (0 to 1219.2 m/min) Electrical Specifications Voltage Range: 15 to 32 VDC Standby Current (C 24 VDC): 200 UA (one communication every 5 seconds with green LED enabled) Max Alarm Current (max.): 2 mA C 24 VDC (one communication every 5 seconds with red LED enabled) Max Current (max.): 4.5 mA C 24 VDC (one communication every 5 seconds with amber LED enabled) Isolator Load Rating: 0.0063 For more information Learn more about Gamewell-FCI's Velociti° Series 3 Detectors and other products available by visiting www.Gamewell-FCI.com Honeywell Gamewell-FCI 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.honeywell.com AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL:S2332 FM:3023594 MEA FDNY: COA-219-02-EVol. VI CSFM:7272-1703:0501 ISO 9001 Certification 9020-0617 1 K 1 04/2018 ©2018 Honeywell International Inc. For a complete listing of all compliance approvals and certifications, please visit: http://www.gamewell- fci.com/en-US/ documentation/Pages/ Listings.aspx E3 Series®, Velociti® and Gamewell-FCI® are registered trademarks of Honeywell International Inc. UL` is a registered trademark of Underwriter's Laboratories Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to- date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications aresubjectto change without notice. Honeywell O,�� SYSTEM � SENSOR- L-Series and L-Series with LED Indoor Selectable Horns, Strobes and Horn Strobes System Sensor L-Series and L-Series with LED audible visible notification products are rich with features guaranteed to cut installation times and maximize profits with lower current draw and modern aesthetics. Features • LED technology provides lower current draw • Digital Voltage Meter (DVM) diagnostic test points for Horn Strobes and Strobes • Common aesthetics across the L-Series platform • Standard and compact sizes • Tamper -resistant construction • Field -selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, and 185 • Field -selectable candela settings on ceiling units: 15, 30, 75, 95, 115, 150, and 177 • Rotary switches for candela, tone and volume selections • Mounting plate provides plug-in design for easier installation and shorting springs to check wiring continuity • Electrically compatible with legacy SpectrAlert, SpectrAlert Advance and L-series devices • Synchronization through use of UL approved power supplies that support System Sensor Sync protocol or System Sensor MDL3 Sync Module • Horns, Strobes and Horn Strobes listed for wall or ceiling use Agency Listings SIGNALING SIGNALING C �� US U� ULC FM a LISTED LISTED LISTED APPROVED Horn Strobes Horns: Horns: 3057072 7300-1653:0525 and Strobes: 54011 54011 FM23FPUS0195 7135-1653:0503 S5512, 54011 7135-16530526 The System Sensor L-Series and L-Series with LED platform offers the most versatile and easy -to -use line of horns, strobes, and horn strobes in the industry with lower current draw and modern aesthetics. LED lighting technology offers significantly lower current draw compared to older Xenon bulbs across a full candela range. This improves design flexibility for notification appliance circuits (NACs) while also reducing power supply requirements allowing for simpler and lower cost installations. Flexible design options meet virtually any application requirement: wall or ceiling mount, standard or compact sizes, red or white color choices, bezel kits for alternate markings and languages, and LED color lenses for distinctive visual signaling. In addition, installers can easily adapt devices using field selectable candela, tone and volume settings using rotary switches. The L-Series and L-Series with LED line is developed to simplify installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults. The universal mounting plate includes an onboard shorting spring, so installers can test wiring continuity before the device is installed. In addition, the System Sensor L-Series with LED notification appliances offer a new diagnostic test point feature that allows you to measure device voltage with a digital voltage meter (DVM) without removing the appliance from the wall or ceiling. The DVM test points are discreetly located on the face of the notification appliance which enable faster troubleshooting and end of line (EOL) voltage checks while greatly reducing the risk of misplacing or damaging appliances during troubleshooting. AVDS916-01 • 10/03/2023 • Page 1 L-Series and L-Series with LED Specifications Standard Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non -condensing Strobe Flash Rate 1 flash per second Nominal Voltage, LED Strobes and Horn Strobes Regulated 24 VDC Nominal Voltage, Horns Regulated 12 VDC or regulated 24 DC/FWR Operating Voltage Range, LED Strobes and Horn Strobes 16 to 33 V (24 V nominal) Operating Voltage Range, Horns 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Input Terminal Wire Gauge 12 to 18 AWG UUULC Current Draw Data, Horn Tones, and Sound Output Data Candela 16-33 Volts Rating Wall Ceiling Candela 15 18 18 Range 30 22 22 75 70 70 95 75 75 110 85 — 115 — 90 135 105 — 150 — 110 177 — 115 185 120 — 8-17.5 Volts 16-33 Volts Sound Pattern dB DC DC FWR Temporal High 39 44 54 Temporal Low 28 32 54 Non -Temporal High 43 47 54 Non -Temporal Low 29 32 54 3.1 KHz Temporal High 39 41 54 3.1 KHz Temporal Low 29 32 54 3.1 KHz Non -Temporal High 42 43 54 3.1 KHz Non -Temporal Low 28 29 54 Coded High 43 47 54 3.1 KHz Coded High 42 43 54 Maximum Horn StrobeUUULC • .: Current Draw (mA RMS), Horn Strobe, Candela Range (15-185 cd) Sound Output (dBA) Switch Pos. Sound Pattern Volume Setting 15cd 30cd 75cd 95cd 16-33 Volts 110cd 115cd WALL CEILING 135cd WALL 150cd CEILING 177cd CEILING 185cd WALL 16-33V DC 1 Temporal High 35 38 87 92 94 120 189 189 190 190 87 2 Temporal Low 35 38 87 92 94 120 135 135 145 145 79 3 Non -Temporal High 50 52 87 92 94 120 127 127 135 135 87 4 Non -Temporal Low 35 38 87 92 94 120 125 125 130 130 79 5 3.1 KHz Temporal 3 High 35 38 87 89 91 115 155 155 165 165 86 6 3.1 KHz Temporal 3 Low 35 38 87 89 91 115 128 130 135 135 80 7 3.1 KHz Non -Temporal High 40 42 87 89 91 115 125 125 135 135 86 8 3.1 KHz Non -Temporal Low 35 38 87 89 91 115 120 120 130 130 80 AVDS916-01 • 10/03/2023 • Page 2 L-Series with LED Dimensions: Wall -Mounted Equipment 2.07 - 3.46" (53 mm) 1' 68 mm 00®00°0o (-316 00o0o00p0o00000 I oo00100°0°0 00°000°00527" 0 mm) 0 0 133.9 mm 19 ° 0 A0617-00 Compact Strobe, Horn Strobe for Wall A0613-00 Strobes, Horn Strobes for Walls 3.46" 88 mm 23.571.55" 32 mm (9.1 CM) (3.9 em) �O o 001010000000 UP + 0°0°0°0°0°0° °o°o°o°o°o°o° 5.38" 5.27^ o0000000ap000 (13.7 cm) O 133.9 mm°0°0°0°0°0°0 0p°o°o0o0Q0o0 O A0547-00 A0557-00 Compact Horn Compact Surface Mount Back Box for Walls (SBBGRL, SBBGWL) Horn 1.25.1 4.82" 32 mm (12.24 cm) (4.69 69 cm) 4 oDp ® o 58" O (14.68 cm) U�® ® r A0549-00 A0554-01 Surface Mount Back Box for Walls (SBBRUSBBWL) L-Series with LED Dimensions: Ceilina-Mounted Eauipment 6.83" diam. (173.5 mm) A0608-00 Strobes and Horn Strobes for Ceilings 6.92" A— (175. 2.5' (64 mm) O A0546-00 Surface Mount Back Box for Ceilings (SBBCRL, SBCWL) AVDS916-01 • 10/03/2023 • Page 3 L-Series with LED: Ordering Information L-Series with LED Horn Strobes LED Lenses P2RLED 2-Wire, Horn Strobe, Wall, Red LENS-A3 Lens LED Amber Wall/Ceiling P2RLED-B 2-Wire, Horn Strobe, Wall, Red, Bilingual LENS-B3 Lens LED Blue Wall/Ceiling P2WLED 2-Wire, Horn Strobe, Wall, White LENS-G3 Lens LED Green Wall/Ceiling P2WLED-B 2-Wire, Horn Strobe, Wall, White, Bilingual LENS-R3 Lens LED Red Wall/Ceiling P2GRLED 2-Wire, Compact Horn Strobe, Wall, Red Accessories P2GRLED-B 2-Wire, Compact Horn Strobe, Wall, Red, Bilingual TR-2 Universal Wall Trim Ring Red P2GWLED 2-Wire, Compact Horn Strobe, Wall, White TR-2W Universal Wall Trim Ring White P2GWLED-B 2-Wire, Compact Horn Strobe, Wall, White, SBBWL Wall Surface Mount Back Box, Red Bilingual SBBWL Wall Surface Mount Back Box, White P2RLED-P 2-Wire, Horn Strobe, Wall, Red, Plain SBBGRL Compact Wall Surface Mount Back Box, Red P2WLED-P 2-Wire, Horn Strobe, Wall, White, Plain SBBGWL Compact Wall Surface Mount Back Box, White P2RLED-SP 2-Wire, Horn Strobe, Wall, Red, FUEGO TRC-2 Universal Ceiling Trim Ring, Red P2WLED-SP 2-Wire, Horn Strobe, Wall, White, FUEGO TRC-2W Universal Ceiling Trim Ring, White PC2RLED 2-Wire, Horn Strobe, Ceiling, Red SBBCRL Ceiling Surface Mount Back Box, Red PC2RLED-B 2-Wire, Horn Strobe, Ceiling, Red, Bilingual SBBCWL Ceiling Surface Mount Back Box, White PC2WLED 2-Wire, Horn Strobe, Ceiling, White Bezelst PC2WLED-B 2-Wire, Horn Strobe, Ceiling, White, Bilingual BZR Wall Red Bezel Kit L-Series with LED Strobes BZW Wall White Bezel Kit SRLED Strobe, Wall, Red BZGR Compact Wall Red Bezel Kit SRLED-B Strobe, Wall, Red, Bilingual BZGW Compact Wall White Bezel Kit SWLED Strobe, Wall, White BZRC Horn Strobe Ceiling Red Bezel Kit SWLED-B Strobe, Wall, White, Bilingual BZWC Horn Strobe Ceiling White Bezel Kit SGRLED Strobe, Compact, Wall, Red SGRLED-B Strobe, Compact, Wall, Red, Bilingual Notes for L-Series With LED Horn Strobes and Strobes: SGWLED Strobe, Compact, Wall, White All -P models have a plain housing (no "FIRE" marking on cover). All -SP models have "FUEGO" marking on cover. SGWLED-B Strobe, Compact, Wall, White, Bilingual All -ALERT models have "ALERT' marking on cover. SRLED-P Strobe, Wall, Red, Plain All -B models have "FIRE/FEU" marking on cover for use in Canadian SWLED-P Strobe, Wall, White, Plain applications. SRLED-SP Strobe, Wall, Red, FUEGO Amber lenses are not for use in Canadian applications SWLED-CLR- Strobe, Wall, White, ALERT Notes for L-Series Horns: ALERT 'Horn -only models are listed for wall or ceiling use. SWLED-ALERT Strobe, Wall, White, ALERT, Amber Lens SCRLED Strobe, Ceiling, Red Notes for Bezels: SCRLED-B Strobe, Ceiling, Red, Bilingual tEach bezel pack ships in a package of 5. Add one of the following extensions for print/language options: -F (FIRE), -AL SCRLED-P Strobe, Ceiling, White, Plain (ALERT), -EV (EVAC), -AG (AGENT), -P (Plain), -FR (FEU), -PG (FOGO), -SP SCWLED Strobe, Ceiling, White (FUEGO), -SPE (FUEGO/FIRE). SCWLED-B Strobe, Ceiling, White, Bilingual SCWLED-P Strobe, Ceiling, White, Plain SCWLED-CLR- Strobe, Ceiling, White, ALERT ALERT L-Series Horns HRL" Horn, Red HRLA" Horn, Red, Plain, ULC HWL" Horn, White HWLA" Horn, White, Plain, ULC HGRL" Compact Horn, Red HGRLA* Compact Horn, Red, Plain, ULC HGWL" Compact Horn, White HGWLA" Compact Horn, White, Plain, ULC 3825 Ohio Avenue • St. Charles, IL 60174 USA System Sensor® is a registered trademark Phone: 800-SENSOR2 • Fax: 630-377-6495 of Honeywell international, Inc. www.systemsensor.com SYSTEM 3333 Unity Drive, Mississauga, ON L5L 3S6 Canada ©2023System Sensor. Phone: 800-SENSOR2 • Fax: 905 812 0771 Product specifications subject to change without notice visit systemsensoccom or current product information, including the latest version of this data sheet. SENSOR® www.systemsensor.ca nvoss,s-o, • 10/0/03/2023 IS6 ' "-PS10 6 Amp and 10 Amp, 24 Volt Power Supplies The PS Series are independently configurable power supplies, allowing you to pair any input with any output, and feature LED diagnostics for troubleshooting. The PS Series is a remote power supply line from Silent Knight and is a direct replacement for the 5495/5499. The SK-PS6 is a 6 amp and the SK-PS10 is a 10 amp, remote power supplywith battery charger that may be connected to any 12 or 24volt fire alarm control panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power for NACs (notification appliance circuits) configured as either Class B or Class A (requires the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH batteries and can charge up to 33 AH batteries in a separate cabinet. FEATURES AND BENEFITS • Up to five (6 amp model) or seven (10 amp model) independently -configurable, power - limited output circuits for: —Class B and/or Class A NACs —Class B and/or Class A resettable or non- resettable 24V auxiliary power —door holder power • Converts from Class B to Class A wiring without losing any outputs using the ZNAC- PS converter card (sold separately) • Optimal for powering four -wire smoke detectors, annunciators, and other system peripherals requiring regulated power • Optional addressable control, monitor, and relay modules and power -supervision relay (EOLR-1) • Configurable for ANSI° Temporal or Temporal coded output • UL-Listed NAC synchronization using System Sensor', Wheelock', Gentex°, or AMSECO° appliances • Synchronization can be triggered from FACP NAC/remote sync outputs, cascaded power supply, or a control module, single or multi, which may be housed within the power supply cabinet • Ability to cascade up to four power supplies • Two (6 amp model) orthree (10 amp model) fully -isolated input/control circuits which can be programmed to any output • Two Form C normally -closed trouble relays for AC Trouble and General Trouble • 6 or 10 amp full load output, respectively, with 3 A maximum/circuit • Individual NAC power and trouble LEDs for diagnostic efficiency • Trouble history mode for diagnostic support • Wide range end -of -line supervision value (normal: 2-27K ohms) • Selectable earth fault detection (enable or disable) • AC trouble report delay timer • Completely configurable via onboard DIP switches, no extra software required • Self-contained in compact, locking cabinet constructed of heavy gauge steel with a 2 am corrosion -resistant powder coat chip and scratch -resistant finish • Cabinet designed with ten double knockouts and a removable door for ease of installation and wiring • Includes integral battery charger capable of charging up to 33 AH batteries • Cabinet can house two 7 AH or 18 AH batteries • Battery charger may be disabled via DIP switch for applications requiring larger batteries and external battery charger • Removable terminal blocks accommodate up to 12 AWG (3.1mm2) wire • Works with any UL 864 FACP which utilizes an industry -standard reverse -polarity notification circuit Honeywell ®SILENT' IQVIGHT ORDERING INFORMATION SK-PS6: 6.0 A,120 VAC remote charger power supply in a lockable, metal enclosure, red SK-PS10:10.0 A,120 VAC remote charger power supply in a lockable, metal enclosure, red ZNAC-PS: Optional Class A converter card, sold separately SK-CONTROL: Addressable Control Module for one Class B or Class A zone of supervised, polarized Notification Appliances. Notification Appliance Circuit option requires external 24 VDC to power notification appliances. SK-RELAY: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch SK-MONITOR: Addressable Monitor Module for one zone of normally open dry -contact initiating devices. Includes plastic cover plate and end -of -line resistor. Module may be configured for either a Class B or Class A SK-MONITOR-2: Dual Monitor Module. Same as SK-MONITOR except it provides two inputs for Class B wiring only SK-RELAYMON-2: Provides two monitored inputs and two Form-C relays. Functions in Class B wiring only SK-CONTROL-6: Six -circuit supervised control module SK-RELAY-6: Six Form-C relay control module EOLR-1:12/24 VDC end -of -line relay for monitoring four -wire smoke detector power BAT-1270-BP: Battery, 12 volt, 7.0 AH, 5-pack (two required) BAT-12180-BP: Battery, 12 volt, 18AH, 2-pack BAT-12330: Battery, 12 volt, 33AH SEISKIT-MULTI-1: Seismic kit for the PS Series. Includes bracket and hardware for two 7AH or two 18AH batteries. Page 2 of 3 — SK-61095:C • 3/10/2021 SK-PS6 / SK-PS10 TECHNICAL SPECIFICATIONS PRIMARY (AC) POWER SK-PS6:120 VAC, 50/60 Hz, 5.OA maximum SK-PS10:120VAC, 50/60 Hz, 6.2 A maximum Wire Size: #12-14 AWG with 600 V insulation COMMAND INPUT CIRCUIT Trigger Input Voltage: 9 to 32 VDC Trigger Current: 2.0 mA (16 - 32 V); Per Input:1.0 mA (9 -16 V) RELAY CIRCUITS Trouble Contact Rating: 4 A at 24 VDC OUTPUT CIRCUITS • 24 VDC filtered • SK-PS6: T138-TI39 —1A Regulated, 3A special applications; TB10-TB12 — 0.3A Regulated, 3A special applications • SK-PS10: TB8-TB11-1.5A Regulated, 3A special applications; TB12-TB14 — 0.3A Regulated, 3A special applications • 6.0 A (SK-PS6) or 10.0 (SK-PS10) maximum total continuous current for all outputs Honeywell Silent Knight 12 Clintonville Road Northford, CT06472-1610 203.484.7161 www.sitentknight.com SECONDARY POWER (BATTERY) CHARGING CIRCUIT • Supports lead -acid batteries only • Float -charge voltage: 27.6 VDC • Maximum current charge:1.5 A • Maximum battery capacity:18 AH (inside cabinet) • Maximum battery charging capacity: 33 AH (external cabinet) PHYSICAL Dimensions: 20.0"H x 14.5"W x 3.5"D (cm: 50.8H x 36.83W x 8.9D) Weight: with two 7Ah batteries is 24 pounds (10.9 kg), with two 18 AH batteries is 39 pounds (17.7 kg) STANDARDS AND CODES The SK-PS complies with the following standards: NFPA 72: National Fire Alarm Code UL 864: Standard for Control Units for Fire Alarm Systems (NAC expander mode) UL 1481: Power Supplies for Fire Alarm Systems AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL Listed: S3511 CSFM: 7315-0559:0522 FDNY Approved FM Approved SK-61095 I C 1 03/21 ©2021 Honeywell International Inc. Honeywell SILENT" KNIGHT