BLD20110287_AT&T.pdf
CITY OF EDMONDS
th
121 5Avenue North,Edmonds WA 98020
Phone: 425.771.0220 • Fax: 425.771.0221 • Web: www.ci.edmonds.wa.us
DEVELOPMENT SERVICESDEPARTMENT•PLANNING DIVISION
May 9, 2011
Shane Smith / AT&T Wireless / shanedsmith@comcast.net
RE: Planning Division comments for file BLD20110287(AT&T)
Greetings,
WCF co-locate/replacement8505 (8519) Bowdoin
Thank you for submitting a building permit application for a at
P and RM-2.4
in thezones.I have reviewed the above building permit application for the Planning Division and it
was found that the following information, corrections, or clarifications will need to be addressed before the Planning
Division review can continue.
1.Facility:
Please provide plansor specs of your proposaland scope of work, including dimensions,so that we
can determine which “type”of wireless communication facility this is. ECDC 20.50shows that “micro”and
“mini”facilities are ok if they blend in or are otherwise camouflagedinto the support structure.Co-location on
monopoles is not permitted for “macro”facilities per 20.50.040.E.
ECDC 21.60.004 Micro facility.Micro facility is an attached wireless communication facility which consists of
antennas equal to or less than four feet in height (except omni-directional antennas which may be up to six feet
in height) and with an area of not more than 580 square inches in the aggregate (e.g., one-foot diameter
parabola or two-foot by one and one-half-foot panel) as viewed from any one point. The permitted antenna
height includes the wireless communication facility support structure(see Title 22, Plate 1). \[Ord. 3099 § 10,
1996\].
ECDC 21.60.006 Mini facility.Mini facility is an attached wireless communication facility which consists of
antennas equal to or less than 10 feet in height or a parabolic antenna up to one meter (39.37 inches)in
diameter and with an area not more than 50 square feet in the aggregate as viewed from any one point. \[Ord.
3099 § 11, 1996\].
2.Height:
Please confirm that the height of theexisting monopole will not be altered. Some notes indicate the
pole is 108.5’tall while the plans show it as 109’4”(sheet C-1).
Please submit a written response to the above, along with any revised plansto your Permit Coordinator:
Theresa Umbaughwww.ci.edmonds.wa.us.If you have any questions, please
. All code citations can be found at:
do not hesitate to contact me. I look forward to working with you on this project.
Sincerely,
gina coccia ::
associate planner
City of Edmonds Development Services Department
th
121 5Avenue North, Edmonds WA 98020
425.771.0220 x 1778 | coccia@ci.edmonds.wa.us
cc:BLD20110287
1 | Page