Loading...
bld20140221_Pirzadeh_Arbor_Fence Comment 2.pdf City of Edmonds TH 121 5AVENUE NORTH •EDMONDS, WA 98020 • (425) 771-0220 FAX(425) 771-0221 Website: www.edmondswa.gov/ DEVELOPMENT SERVICES DEPARTMENT Planning • Building • Engineering Plan Review Comments Plan Check :Date: #BLD20140221May7, 2014 th Project Name/Address: Pirzadeh Arbor/Fence–7409 228SW Contact Person/Address/Fax: David & Michelle Pirzadehdandmio@comcast.net Reviewer:Chris RiveraDivision:Engineering During review of the subject submittal,it was found that the following information, corrections, or clarifications wouldneed to be addressed. All Handouts referred to in these comments can be accessed at our website: www.edmondswa.gov/under City Government / Development Services Department / Engineering Division then scroll down to Handouts: st 1Review –March 31, 2014 nd 2Review –May 7, 2014 May 7, 2014-O.k.,utilities shown on resubmitted siteplan. 1) 2)May 7, 2014 –The added asphalt to the north of the permitted driveway (permit BLD20010680) and extending into the right of way was notaccounted for. Please provide date constructed and square footage. Impervious surfacesproposed or constructed within the right of way must be accounted for in stormwater mitigation. Please revise impervious surface areas. March 31, 2014 -When reviewing previously submitted site plans for theadditionsthat were proposed at the time,I notice some discrepancies in impervious surfaces. As well as with the use of satellite image I can see that there areimpervious surfaces in the backyard not accounted for. Please label and show all impervious surfaces on the plans for the front entry addition, front walkway, back patio, gravel areas, gravel along the street, widenedasphalt driveway (please distinguish between concrete and asphalt for the driveway on the plans)as well as any otherimpervious surfaces and sqft. as well as provide the date of construction. Impervious surfaces are any hard surface that prevents or retards the entry of water into the ground as it would occur in natural conditions. Please revise the impervious surface calculations on the site plan accordingly. 3)May 7, 201lease submit a Site Classification Worksheet, see belowcomment. 4-P March 31,2014-Please fill out and attach the table from the Site Classification Worksheet within handout E72,totaling all existing impervious surfaces and proposed. DATE FAXED/E-MAILED5/7/2014PAGE __1__ OF __1_ 4)May 7, 2014 According to the latest submittal(resub 4/25/14), there is an additional 1147 sqft of - impervious surfacesthat does not flow to the existing detention system.This additional impervious surface area along with the impervious surface areafrom the asphalt drivewayneeds to be mitigated. Please submit plans showing a proposed stormwater systemor reduce impervious surface areas to bring site into compliance. See handoutsE-72, E-72A and E-72B availablein the City website. - March 26, 2014Please note thatall new impervious surfacesaddedsince 1977, exceeding2000sqft, will require astorm watermanagement system.City records indicate a detention system was installed in 2001 for the mitigation of 3062 sqft of storm water from the garage, breezeway, covered storage, driveway and mud room. If additional mitigation is neededplease show the storm water system. Please resubmit 3 copies of the revised plans/documents to a Development Services Coordinator.Please contact me, Chris Riveraat (425)771-0220ext. 1339,if you have specific questions regarding these plan corrections. DATE FAXED/E-MAILED5/7/2014PAGE __1__ OF __1_