Frederick_PL-8159_Byron_ADD_BLD20090479_2.pdf
City of Edmonds
TH
121 5 AVENUE NORTH EDMONDS, WA 98020 • (425) 771-0220 FAX(425) 771-0221
Website: www.ci.edmonds.wa.us
DEVELOPMENT SERVICES DEPARTMENT
Planning • Building • Engineering
Engineering Plan Review Comments
Permit Application :Date:
# BLD20090479 9/16/09
Project Name/Address:
Larson – 8159 Frederick PL
Contact Person/Address, Fax or E-mail:
Yakov Shadyrya – yshadyrya@yahoo.com
Reviewer: JENNIFER COLLINS Division:
ENGINEERING
During review of the subject submittal, it was found that the following information, corrections, or
clarifications would need to be addressed. All Handouts referred to in these comments can be accessed at
our website: www.ci.edmonds.wa.us under City Government / Development Services Department /
Engineering Division then scroll down to Handouts:
ST
1 Review – 8/11/09
nd
2 Review – 9/16/09
1.9/16/09 – Comment was partially addressed. The impervious surface calculations need to be
broke down showing what year each area was constructed. I’ve included an example as to how it
should be shown on the plans.
Existing Impervious: Roof outline: xxxxx Year built: xxxx
Driveway: xxxx xxxx
Decks: xxxx xxxx
Total: xxxxx
Proposed Impervious: Roof outline: xxxx
Deck: xxx
Walkway: xxx
Total: xxx
8/11/09 comment:Show the impervious surface calculations such that:
a.All impervious surface constructed before 1977 are grouped together.
b.All impervious surface constructed after 1977 are grouped together.
DATE E-MAILED 9/16/2009 PAGE()
1
City of Edmonds
TH
121 5 AVENUE NORTH EDMONDS, WA 98020 • (425) 771-0220 FAX(425) 771-0221
Website: www.ci.edmonds.wa.us
DEVELOPMENT SERVICES DEPARTMENT
Planning • Building • Engineering
Engineering Plan Review Comments
c.All proposed impervious surface are grouped together.
2)9/16/09 – Comment was partially addressed. It appears the roof outlines are clarified on the full
scale site plan; however, it is not legible on the plans . Also, the new and existing roof outlines are
not shown on the reduced site plan.
a.Due to the roof outlines not being legible I am unable to verify the new roof area as adding
64sqft of impervious surface area. Please further clarify.
8/11/09 comment:Please clearly show and label the existing and proposed roof outlines. This will
allow us to accurately calculate the new impervious surfaces.
3)OK
4)OK
5)OK
Please resubmit 3 copies of the revised site drawings and associated documents with a written response to
each item to an Engineering Technician. Please contact me at 425-771-0220 ext 1321 or by e-mail at
collinsj@ci.edmonds.wa.us if you have specific questions regarding these plan corrections.
DATE E-MAILED 9/16/2009 PAGE()
2